KIMRYAN / Locale-SubCountry-1.63 / Changes

Revision history for Perl CPAN module Locale::SubCountry

1.63 9 Apr 2014
    Check that a country has sub countries before searching for code and full name, fix for RT bug 89706
    Remove minuimum versions for utf8 and strict modules, fix for RT bug 92587


1.62 23 Jul 2013
    Removed POD utf encoding directive from SubCountry.pm again and removed utf8
    characters from the POD section. They are still causing errors on selected
    platfroms and versions of Perl. Replaced with ASCII text. Fix for RT bug 71228

1.61 15 Feb 2013
    Small correction for German data
    Replaced POD utf encoding directive in SubCountry.pm as some accented characters occur in the POD

1.60 13 Feb 2013

    NOTE: On September 2, 2008, FIPS 10-4 was one of ten standards withdrawn by NIST as a
    Federal Information Processing Standard. FIPS data will remain in this module for now.
    I may need to withdraw it if it becomes too difficult to align FIPS data with updates to ISO data

    Added FIPS data to several countries
    Added Communities to Spain
    Added Italian regions
    Allowed for blank lines within subcountry XML data
    Added FIPS codes to many countries
    Removed POD utf encoding directive from SubCountry.pm (only needed in Data.pm), fix for RT bug 82933

1.59 22 Jan 2013
    Added $VERSION variable into the Locale::SubCountry::World package

1.58 22 Jan 2013
    Added '=encoding utf8' to Data.pm to allow POD formatters to work
    Changed minimimum required version of Test::Pod and Test::Pod::Coverage to 1.04, fix for RT bug 82717

1.57 14 Jan 2013
    Moved declaration of $VERSION into the Locale::SubCountry package, fix for RT bug 79734


1.56 7 July 2012
    Removed use of $ENV{AUTHOR_TESTING} for running POD tests, caused problems for CPAN testers

1.55 5 July 2012
    Fixed xml tagging in Macedonian data,  fix for RT bug 78157
    Minor updates to data
    Use $ENV{AUTHOR_TESTING} for running POD tests, fix for RT bug 78123
    Print message to STDERR (via call to die) on badly formed country and sub country data

    Thanks to Ron Savage for the following:
    Use Test::More everywhere rather than Test::Simple sometimes.
    Add t/test.t.
    Clean up pre-reqs in Makefile.PL
    Add Build.PL.
    Add encoding to POD in Locale::SubCountry

1.51 2 July 2012
    Many new countries added, thanks to Ron Savage
    Sub countries added to existing countries
    Many corrections to sub country data
    Changed to all lower case for the spelling of 'and', 'of' 'the' etc that may occur in names
    Added 'use utf8' to main.t


1.50 18 Apr 2012
    Added Makefile.PL  back to the distribution set

1.49 18 Apr 2012
    Fixed errors in XML coding
    Fixed the Brazilian state Rondônia, fix for RT bug 73830
    Added 3 new Indonesian provinces, fix for RT bug 74763
    Added 'use utf8' to Data.pm, fix for RT bug 73829
    Added Metro Manila in Philippines, fixed some other provinces, fix for RT bug 69678

1.48 17 Apr 2012
    Added South Sudan as a new country
    Removed states from Sudan
    Added New Caledonia, Palau, San Marino, Guernsey, Jersey, Saint Martin,
      Saint Barthélemy, Sint Maarten, Isle Of Man

1.47 29 Apr 2011
    Converted tests to use Test::Simple in main.t
    Added test for regional_division
    Added test for initialising with 2 letter country code
    Improved synopsis

    Fixed typo in 'new' method that was stopping the use of 2 letter country codes
    being used as a parameter. Note, this also caused a faliure in the tests for
    the dependant module, Lingua::EN::AddressParse


1.46 6 Apr 2011
    Fixed main.t so tests now use title cased country names.
    Corrected typos in Changes, README, SubCountry.pm demo.pl, thanks to Glenn Fowler

1.45 5 Apr 2011
    Corrected FIPS codes for Repbulic or Ireland and other countries, thanks to Michele Ongaro
    Added data for Montenegro as a separate country
    Added data for Serbia as a separate country
    Added Hong Kong and it's districts (it also appears as a region of China)
    Corrections to documentation

    Country names are now stored in title case, not all capitals, as in Fiji and not FIJI.
    This was done to improve readability (original ISO date used upper case)
    NOTE, this means that when calling the new method with a country name, you need
    to specify the name in title case. It will not work if you use upper case. This
    could cause some backward compatibility issues from your calling code.

1.44 20 Jan 2011
    Moved Locale::SubCountryData to Locale::SubCountry::Data name space
    Added use struct and use warnings
    Moved all global variables to the Locale::SubCountry name space

1.43 14 Jan 2011
    Fixed the number of tests in main.t, should be 17, not 15

1.42 13 Jan 2011
    Changed name of UK region St. Helens to Saint Helens, fix for RT bug 38599
    Fixed FIPS codes for UK regions Stafforshire and Saint Helens
    Removed trailing blanks, fix for RT bug 38597
    Changed encoding of XML data to UTF-8,  thanks to Benjamin Erhart. Fix for RT bug 38559
    Moved XML data to separate package, Locale::SubCountry::Data and encoded this file as UTF-8
    Added additional tests for unknown sub country codes and names

1.41 20 Apr 2008
    Added FIPS codes for UK, thanks to TJMATHER for patch, RT bug #32899

1.40 12 Jan 2008
    Changed  regexp match on XML country field to account for both Unix and MSDOS line endings
    Converted files to Unix line endings

1.39 6 Jan 2008
    Allowed for sub countries with no ISO code, such as Shariff Kabunsuan in the Phillipines
    Thanks to Matt Loschert for pointing this out.


1.38 26 Nov 2006
    Changed sub country names in Sudan and Phillipines
    Added examples/demo.pl

1.37 02 Apr 2006
    Removed invalid characters in data for Iran, United Arab Emirates and Oman
    Removed alternate names (appended to end of main names in brackets) from many sub countries

    NOTE: new method now issues warning and returns undef if invalid country code or
    name parameter is passed. Previous versions died inside the new method.

1.36 11 Jul 2005
    Added regions for Andorra
    Added regions for Grenada
    Updated distribution to current CPAN requirements


1.35 04 Jul 2005
    Fixed problem with name space pollution for $VERSION variable

    Added data for the following countries
        Antigua and Barbuda
        Andorra
        Aruba
        Bhutan
        Nauru
        Seychelles

    For Cape Verde, changed Calheta de São Miguel to São Miguel
    For Venezuela, changed Distrito Federal to Distrito Capital
    Added districts for Honduras

1.34 17 Apr 2004
    Fixed typo in XML data for American Samoa

    Added 'has_sub_countries' method to determine if a country has any sub countries
    (some such a Singapore do not). Updated synopsis to show it's use.

1.33 13 Feb 2004
    Fixed pattern matching in data loader to allow for accented characters

1.32 13 Feb 2004
    Added 'use locale' to main.t to stop 'make test' errors

1.31 12 Feb 2004
    Moved XML data back into main module.
    Corrected documentation

1.30 8 Feb 2004

    Completely updated data, many new countries and sub countries added
    Added countries without sub countries, such as Singapore
    Stored data in separate file in XML format

    Added method 'category' to return the type of subcountry such as state, city etc
    NOTE: this replaces the 'sub_country_type' method

    Added method 'regional_division' to return the regional_division of subcountry
    such as SCT (Scotland) for Edinburgh

1.23 16 Jul 2003

    Added data for Finland and Singapore, thanks to Chris McKay

1.22 18 Jan 2003
    Removed use of $_ in initialization code, as suggested by Ilya Martynov
    Corrected country code for Iran, thanks to Todd A. Green
    Removed Exporter references, as suggested by TJ Mather
    Added Timor-Leste as a new country (East Timor)
    Changed Canadian province of Newfoundland to Newfoundland and Labrador


1.21 9 Sep 2002
    Fixed bug in test script main.t

1.20 7 Sep 2002

    Added methods to new Locale::SubCountry::World package
    - new
    - all_full_names
    - all_codes
    - full_name_code_hash
    - code_full_name_hash

    NOTE!
    all_full_names method replaces the stand alone all_country_names function
    all_codes method replaces the stand alone all_country_codes function
    The above method names duplicate existing method names (polymorphism),
        so make sure you are working with the right type of object first.

    These changes were necessary because of user requests for country name
    and code look ups prior to sub-country lookups. Previous versions would not
    work with Locale::Country because of a clash in exported names. Thanks to
    Todd Green for this suggestion.

    Added the FIPS 10-4 (US standard) for many sub countries
    Added FIPS10_4_code method
    Added ISO3166_2_code method
    Added many corrections to sub country names
    Thanks to TJ Mather for adding FIPS codes and fixing other data errors

    Added extra tests to main.t
    Prefixed internal data structure elements with a dash, to follow OO convention

1.11 23 Mar 2002
    Corrected codes for Corsica, France, thanks to Mathias Herberts

1.10 04 Jan 2002
    Replaced INIT block with anonymous subroutine. This removed problems
    that occurred when mod_perl or eval statements were used.

1.09 25 Jul 2001
    Added code for US, West Virginia (WV), thanks to Michelle Agnew

1.08 16 Mar 2001
    Made many corrections to country data to align it with ISO:3166-2 standard
    Defined sub country types for all countries
    Added information for Israel and Albania
    Removed some MS-DOS line terminators that were generating warnings
    Added two more tests to main.t


1.07 12 Mar 2001
    Corrected errors in German sub countries thanks to Lars Steubesand

    Corrected errors in data for Austria, Poland, Romania, Turkey, Germany and
    Columbia. Thanks to Philip Newton.

1.06 20 Feb 2001
    Allowed countries to be specified by either full name or two letter code
    Made country names compatible with ISO 3166-1 standard
    Added country_code method to retrieve ISO code for current object
    Added all_country_codes method to retrieve ISO codes for all countries
    Corrected abbreviation for Canadian province of Nunavut
    Thanks to Trevor Schellhorn for these suggestions

    Corrected two Belgium sub countries. Thanks to Wim Verhaegen


1.05 15 Oct 2000
    sub_country_type method returns 'unknown' when no data defined
    Fixed bug in mismatch count in main.t test module

1.04 04 Oct 2000
    Added all remaining countries, thanks to Alastair McKinstry
    Included sub country type (state, county etc) in lookup data
    Added country and sub_country_type methods
    Accounted for sub country codes of 0

1.03 20 Aug 2000
    Added many more countries, thanks to Alastair McKinstry
    Now account for any incorrect capitalization of sub country names
    _clean subroutine only removes dots and spaces, dashes are now allowed
    Added subroutine to return array of countries that have lookup data
    Added test in main.t to convert all codes to names and back again
    Allowed for leading or trailing white space in __DATA__ entries

1.02 14 May 2000
    Added Canadian province of Nunavut, thanks to Steve Taylor

1.01 25 Apr 2000
    To follow the approach of ISO 3166-2
    - renamed module from RegionAbbrev to SubCountry
    - replaced all references to 'abbreviation' with 'code'

    Improved regexes in _clean, thanks to Mark Summerfield
    Replaced regexp with hash lookup for valid countries
    Accepted all forms of upper/lower case in country name

1.00  8 Apr 2000
     First Release



Hosting generously
sponsored by Bytemark