* v3.01 - 10th December 2015
No changes from v3.00_02
* v3.00_02 - 27th November 2015
Dual subs/methods have improved detection of how they have been called.
Misc small documentation improvements.
* v3.00_01 - 15th October 2015
BUG FIX: Uploads with enctype "multipart/form-data" and at least one
non-file param now process without warnings. (issue 107570)
* v3.00 - 21st May 2015
No changes from v2.99_04.
* v2.99_04 (pre-release for 3.0) - 18th May 2015
Uploaded files with duplicate field names are treated in the
same ways as other data with duplicate field names.
* v2.99_03 (pre-release for 3.0) - 5th April 2015
BUG FIX: Additional change to forms.t to prevent MS Windows systems
hanging. (issue 103315)
* v2.99_02 (pre-release for 3.0) - 4th April 2015
Added force_unique_cookies method and equivalent parsing code and tests.
Improved test suite: better coverage, skipped failling tests for
Microsoft systems which don't use/honour normal permissions, silenced
noisy tests on older perls.
* v2.99_01 (pre-release for 3.0) - 31st March 2015
Source amended to pass perlcritic. String evals removed or replaced.
Strictures added to module and examples. All filehandles are now
lexicals. Consistent source formatting applied to module (perltidy).
deny_uploads and set_size_limit added.
All active public subroutines are now methods.
print_cookie_data and print_form_data have been removed. They had been
deprecated for well over a decade.
escape_dangerous_chars has been removed. It has been considered a
security risk since version 2.0.
* v2.04_05 - 11th October 2014
binmode forced on all file writes to avoid corruption when converting
EOLs on MSWin32.
* v2.04_04 - 8th October 2014
Conversion section of _store() replaced to remove dependence on \K
escape which was only introduced in perl 5.10.
* v2.04_03 - Not released
Upload tests fixed again to solve problems for MSWin32 users:
binmode had been erroneously left off the inputs.
Fixed generation of MYMETA/META files as spec 2.0 not yet supported
in the local build environment.
* v2.04_02 - 7th October 2014
Upload tests fixed to solve two problems for MSWin32 users:
permissions-based tests skipped and coversion algorithms for text MIME
types improved.
* v2.04_01 - 6th October 2014
Full test coverage of non-deprecated features.
BUG FIX: Multi-file uploads could break if the buffer end occured in the
headers of one of the files. (issue 99294)
BUG FIX: $cgi->set_platform ('macintosh') erroneously set platform to
'PC' because the regex was not anchored to the start. 'macintosh'
now results in platform 'Mac' as it should.
Version control moved to git.
Makefile.PL extended to include resources (where available).
* v2.04 - 4th July 2014
Minor documentation fixes and explanation of the proposed split into
legacy/trunk branches. No code changes from 2.03_02.
* v2.03_02 - 17th June 2014
The uploads have had a minor change which may solve the windows size
difference failures. More diagnostics were added to the failures if it
does not.
* v2.03_01 - 13th June 2014
The test multi-part upload data in the test suite has been fixed to have
the correct (CRLF) line terminators. These tests should now pass for
Microsoft users.
The documentation has been amended to reflect the change of maintainer.
* v2.03 - 25th May 2014
Maintainer change: Pete Houston has taken over maintenance from Smylers.
A test suite has been created.
BUG FIX: Cleared up some uninitialised value warnings emitted when query
strings are missing an entire key-value pair eg: "&foo=bar" (issue
38448).
BUG FIX: If the user calls parse_form_data as a class method without a
query string, the method now gives up early and silently
(issue 6180).
BUG FIX: In form-data uploads, the boundary string was not properly
escaped and therefore would not match when it contained
metacharacters (issue 29053).
BUG FIX: The content type for url-encoded forms now matches on the MIME
type only, so additional charset fields are allowed (issues 16236,
34827 and 41666).
BUG FIX: Leading/trailling whitespace is now stripped from cookie names
and values.
BUG FIX: Cookies now no longer need to be separated by whitespace.
Commas can now be used as separators too. (issue 32329).
BUG FIX: The semicolon is now a permitted delimiter in the query string
along with the ampersand (issue 8212).
* v2.02 - May 18, 2003
I've taken over CGI::Lite. Thanks to Andreas for making the security release,
and ensuring the transfer went so well.
url_decode now interprets "+"s correctly, as encoded spaces.
url_encode ensures that all hex-encodings are padded correctly, to 2 digits (so
"%09" for a tab, not "%9"). The fake-encoding done on standard input when
testing at the command-line has been fixed equivalently.
url_encode also converts spaces to "+"s and emits hex characters in upper-case,
since this what web-browsers seem to do. Encoding is now performed on all but
known-safe characters, rather listing all the characters believed to be in need
of encoding.
The internal method _decode_url_encoded_data now uses url_decode, rather than
duplicating its content.
Thanks to Aaron Crane for the above fixes.
This file has been renamed from HISTORY to CHANGES, with the hope that that
will make it show up on search.cpan.org.
More development of this module is planned. I'm making this release now to get
those bug fixes available as soon as possible, and to get the hang of making a
CPAN release. Future changes will have tickets in the CPAN Request Tracker
queue for this distribution.
(The version number v2.01 has been skipped, to avoid possible confusion with
v2.001.)
Smylers <smylers@cpan.org>
* v2.001 - Feb 17, 2003
This 2.001 release is just an emergency release that fixes the most urgent
security need. It is not endorsed by the original author. It was put together
by me after the advisory on the bugtraq mailing list:
http://msgs.securepoint.com/cgi-bin/get/bugtraq0302/94.html
Thanks to Ronald F. Guilmette for bringing up this issue.
andreas koenig
* v2.0 - Aug 20, 2000 b.d.low@ieee.org
I (Ben Low) have assumed maintenance over CGI_Lite. First point of action
(and probably last, the module is quite stable both bug- and feature-wise :-)
is to change the name to fit in with perl's module naming conventions:
CGI_Lite is dead, long live CGI::Lite.
* v1.9 - Jan 31, 1999; Apr 17, 2000 BDL
Added parse_new_form_data(), for use under persistant applications
(e.g. FCGI, mod_perl). This function simply clears the CGI object's
state before calling parse_form_data().
i.e. rather than creating a new CGI object for each request, you can
now write
$CGI = new CGI_Lite;
while (FCGI::accept > 0)
{
$Query = $CGI->parse_new_form_data();
<process query>
}
Minor change in _decode_url_encoded_data() to avoid warnings when
no value is provided in the query.
All changes marked with "BDL". Ben Low <ben@snrc.uow.edu.au>
* v1.8 - May 10, 1997
Removed $` and $' from the code, and "optimized" an important regexp.
As a result, the module is much more efficient. Fixed a minor bug in
multipart boundary parsing. Corrected an error when storing a key that
has multiple values which caused more than one array to be allocated.
Just a note: if you call get_multiple_values method with a scalar
value, the method no longer returns an undef, but the value itself.
As of this version, you can pass a request method (optional) to the
parse_form_data method. This gives you a bit more flexibility when
dealing with forms.
The set_file_type method now works as it should. In earlier versions,
CGI_Lite created "handles" in all cases. Added the close_all_files
method to close uploaded files that are opened as a result of passing
"handle" to set_file_type.
The print_form_data and print_cookie_data are deprecated as of this
version, but have not been removed (for compatibility reasons). It's
better to use the print_data method, which prints the key/value pairs
in the order they were parsed. As a side effect of this change,
if you want to parse form data and cookies in an application,
you have to create two instances of the CGI_Lite object, which
only makes sense.
Added the get_ordered_keys method which will return the list
of _keys_ in the order in which they were parsed. Modified the
wrap_textarea method; it now works properly.
Also, added the add_mime_type, remove_mime_type and get_mime_types
methods to deal with EOL translation based on MIME types. Added
the filter_filename method to alter the way in which uploaded
files are named. Added the add_timestamp method which allows you
to turn off timestamps on uploaded files. NOTE: CGI_Lite no longer
returns the full path of the uploaded file, but simply, the file name.
Added a set of miscellaneous functions: browser_escape, url_encode,
url_decode, is_dangerous, escape_dangerous_chars. CGI_Lite now handles
errors better; you can use the newly implemented is_error, and
get_error_message methods. I've bought back the return_error
method, which you can use to return errors to the browser and
exit. However, this method no longer outputs the HTTP header,
as it did in versions prior to v1.7.
In addition, this version allows you to debug your CGI scripts
"offline" by letting you pass query information through standard
input. I got this idea from CGI.pm, though it's handled a bit
differently. Thanks Lincoln!
* v1.7 - December 28, 1996
Maybe, I should release this version as 2.0 :-) There were a lot of
changes made:
- *Totally* re-wrote the multipart form parsing algorithm. It's
_much_ more efficient with large uploads. It still needs tweaking
to remove the $` and $' -- maybe in the next release.
- Multiple values per field are no longer returned as a null-character
delimited string. Instead, a reference to an array is returned.
You need to de-reference, or call the get_multiple_values method
to get at the array. There was no way I could make this backward
compatible. Please check your scripts, because a few might break.
I apologize.
- Fields containing more than one value in multipart forms are now
handled correctly.
- Added the wrap_textarea method that allows you to neatly "wrap"
long strings.
- You can now parse/decode cookies in much the same manner as forms.
- When saving uploaded files, the module adds a timestamp. As of this
version, the timestamp is added to the front of the file,
as opposed to the end, so that file extensions are preserved.
Note: this module makes no effort to URL decode the filename for
security reasons.
- Added the following new methods: set_buffer_size, parse_cookies,
print_cookie_data, wrap_textarea, get_multiple_values and
create_variables.
- Removed the return_error subroutine and, instead, added _error,
which dumps a message to STDERR and dies.
- You can now install this module in a convenient manner. Also,
fixed up the docs, moved this list of revisions from the module
to a separate file, and added a directory with simple examples.
- Fixed up numerous little bugs, including the "Use of uninitialized..."
warnings.
* v1.62 - January 17, 1996
Modified the parse_multipart_data subroutine so that it
returns the name of the file as the filehandle -- if set_file_type
function is called with the "handle" parameter.
Added the function determine_package to determine the
calling package.
* v1.61 - January 1, 1996
Fixed a minor bug that resulted in end of line characters being removed
from certain binary files.
* v1.6 - December 30, 1995
Added code to handle other header information that the browser might
send after the "Content-Disposition" header.
Added set_platform function so that uploaded text files display
properly.
The function set_file_type no longer returns a status.
Fixed spacing within code.
* v1.5 - November 13, 1995
Corrected two major bugs that caused several fields to be lost (when
the fields before them were either too small or too large).
Added code to make sure that there are no "\r\n" characters in the
regular form fields. Textarea elements and fields that contain uploaded
information from different platforms (i.e Macintosh and PC) will
contain "\r" characters.
* v1.4 - October 15, 1995
Added pod style documentation. Now you can see this manual page by doing
the following:
pod2man CGI_Lite.pm | nroff -man | more
Also, modified the parse_form_data method so that it can return
the actual associative array (if called within an array context).
* v1.3 - October 12, 1995
Completely modified the parse_multipart_data method. It no longer
reads the multipart message line by line, but rather in small size
blocks (or "chunks"). This also eliminated a major bug that caused
Netscape to hang.
Since some browsers do not send a "\r\n" character string at the end
of header lines, the parse_multipart_data method conditionally checks
for and removes them. This also allows you to emulate a multipart/form-data
request by storing a sample request in a file and piping it to your program:
cat multipart.txt | test.pl
* v1.2 - October 12, 1995
Added the set_file_type method to return filehandles for the stored
files.
* v1.1 - October 10, 1995
The environment variable CONTENT_TYPE is used to determine the type of
encoding scheme. In v1.0, the body of the POST request was parsed.
This module no longer outputs an error message if an invalid directory
is passed to the set_directory method. Instead, it returns a status
of 0 to indicate failure.
* v1.0 - September 26, 1995
Initial Release