2012-08-24  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, META.json, META.yml, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm, t/20test-eval.t, t/data/eval.right: Get
	ready for 0.33 release

2012-08-24  rocky <rocky@cpan.org>

	* MANIFEST, META.json, META.yml: I said, get ready for release

2012-08-24  rocky <rocky@cpan.org>

	* Changes, lib/Devel/Trepan.pm, lib/Devel/Trepan/Options.pm: Get
	ready for 0.32 release.

2012-08-24  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm: unalias removes alias listing
	in help for command. Issue #10.

2012-08-23  rocky <rocky@cpan.org>

	* t/20test-eval.t, t/data/eval.right, t/data/eval2.right: Try to
	address CPANTS failures.

2012-08-23  rocky <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Dump.pm, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm: Disable
	Devel::Peek:Dump until we can get I/O problem sorted out.

2012-08-23  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Backtrace.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, lib/Devel/Trepan/DB/Eval.pm: 
	Eval.pm: DRY code. Attempt to clean up DB.pm in advance of a print
	capture routine.

2012-08-23  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Dump.pm, lib/Devel/Trepan/CmdProcessor/Eval.pm,
	lib/Devel/Trepan/DB/Eval.pm: Remove this totally bogus hash context.
	What happens when you say "my %x = ..."; was explained to me by
	David Golden at an NY.pm meeting.

2012-08-23  rocky <rocky@cpan.org>

	* Changes,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Dump.pm: Tidy Dump.pm code

2012-08-22  rocky <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Dump.pm: Add 'Devel::Peek::Dump output under the name "info var
	dump". Issue #13. Thanks (again) to David Golden and NY.pm.

2012-08-22  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Finish.pm: Fix help for
	"finish" command. Thanks to NY.pm for making this mistake apparent.


2012-08-21  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm: Tighten output a
	little.

2012-08-21  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/10test-brkptmgr.t: Tolerate
	errors in breakpoint data better. quit when terminated doesn't need
	confirmation. Add breakpoint manager unit test.

2012-08-21  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, META.json, META.yml: Get ready for release - this time,
	for sure!

2012-08-21  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm: Fix up Trepan.pm pod =items. Get ready
	for release 0.31

2012-08-20  Rocky Bernstein <rocky@cpan.org>

	* t/20test-debug.t, t/20test-eval.t, t/Helper.pm: Changes for funky
	DOS filenames and which also does not have diff

2012-08-20  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	http://github.com/rocky/Perl-Devel-Trepan

2012-08-20  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, META.json, META.yml, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm: Bump version.

2012-08-20  Rocky Bernstein (VCDImager Developer) <rocky@login.bo.opencsw.org>

	* t/20test-eval.t: untabify test output?

2012-08-19  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan.pm, lib/Devel/Trepan/Options.pm: See
	above

2012-08-19  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes: Get ready for 0.3.0 release

2012-08-19  Rocky Bernstein <rocky@cpan.org>

	* t/20test-opt-e.t: Strawberry Perl might not handle -e correctly

2012-08-19  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB/LineCache.pm,
	t/20test-trace.t: Core.pm: arrange to silence debugging in
	finalization code earlier. fall off end when tracing. LineCache.pm:
	remove other temporariy files.

2012-08-19  rocky <rocky@cpan.org>

	* Changes, MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Args.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, t/20test-opt-e.t,
	t/data/opt-e.right: Add gdb "show args".

2012-08-19  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm: Initialize
	$eval_lead_word with a plain "eval".

2012-08-18  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm: Add possibility of COP
	address in eval strings too.

2012-08-18  rocky <rocky@cpan.org>

	* Changes, MANIFEST, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Display_Subcmd/Eva
	l.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Display_Subcmd/Ev
	al.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm, t/data/__FILE__.cmd,
	t/data/alias.cmd, t/data/alias.right, t/data/debug.cmd,
	t/data/dollar0.cmd, t/data/eval.cmd, t/data/eval2.cmd,
	t/data/my.cmd, t/data/next2.cmd, t/data/sig2.cmd, t/data/watch1.cmd: 
	Set/show evaldisplay -> set/show display eval

2012-08-18  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Display_Subcmd/COP
	.pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Display_Subcmd/CO
	P.pm, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm: Add set/show display cop


2012-08-18  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Line.pm,
	t/data/line.right: Reinstate COP address. I didn't have courage of
	my conviction in removing it previously.

2012-08-18  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm: Guard against uninitalized exec_strs
	option.

2012-08-18  rocky <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/10test-linecache.t,
	t/20test-debug.t, t/20test-eval.t, t/data/debug.right,
	t/data/eval2.cmd, t/data/eval2.right: Add remap to location whne -e.
	Build.PL: recommend Term::ReadKey

2012-08-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST: Another MANIFEST file mismatch. MANIFESTS should be
	ditched.

2012-08-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST: stray character got in file.

2012-08-15  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-08-15  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor/Load.pm: Load.pm: Add
	ability to for a command to tell loader to skip loading. Require
	Array::Columnize 1.01

2012-08-15  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm: remove
	additional \n now that was added now are using 1.1 of
	Array::Columnize.

2012-08-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Line.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	t/data/line.right: Remove COP address for now.

2012-08-13  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, t/20test-opt-e.t, t/20test-trace.t, t/data/opt-e.cmd,
	t/data/opt-e.right: Add trepan.pl -e test

2012-08-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB/LineCache.pm: 
	Restart.pm, Core.pm: get restart right when we supply -e.
	LineCache.pm: was messing up remap translation.

2012-08-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Frame.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Remap -e filename to a temporary
	file and populate that using with @DB::dbline.

2012-08-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan.pm: Add last blog entry.

2012-08-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm, t/20test-trace.t,
	t/data/list1.right, t/data/list3.right: In location, always use ::
	suffix after package.

2012-08-12  Rocky Bernstein <rocky@cpan.org>

	* Changes: What's up.

2012-08-12  Rocky Bernstein <rocky@cpan.org>

	* README.md, lib/Devel/Trepan/Options.pm: Correct usage string.

2012-08-12  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl, lib/Devel/Trepan/Options.pm: Allow trepan.pm to
	pass on to Perl's -e (--exec) strings.

2012-08-12  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm, t/data/__FILE__.right,
	t/data/alias.right, t/data/autolist.right, t/data/break.right,
	t/data/cont.right, t/data/debug.right, t/data/display.right,
	t/data/dollar0.right, t/data/eval.right, t/data/eval2.right,
	t/data/fin2.right, t/data/line.right, t/data/list4.right,
	t/data/my.right, t/data/next.right, t/data/next2.right,
	t/data/seq1.right, t/data/trace1.right, t/data/trace2.right,
	t/data/watch1.right, t/data/watch2.right: Following perl5db, print
	more than one line if we think this statement flows over to the next
	line.

2012-08-12  rocky <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/10test-linecache.t: 
	LineCache.pm: add call to find out if a line is a trace line.

2012-08-11  rocky <rocky@cpan.org>

	* README.md: Remove tabs in code

2012-08-11  rocky <rocky@cpan.org>

	* README.md, lib/Devel/Trepan.pm: See above.

2012-08-11  rocky <rocky@cpan.org>

	* lib/Devel/Trepan.pm, lib/Devel/Trepan/Core.pm: Core.pm: don't give
	a warning if startup file .treplrc doesn't exist. Trepan.pm: greatly
	revise POD as seen on CPAN page. README.md: sync with POD.

2012-08-11  Rocky Bernstein <rocky@cpan.org>

	* t/20test-cont.t, t/20test-debug.t, t/20test-fin.t,
	t/20test-list4.t, t/20test-next.t, t/20test-seq1.t: DRY test code
	more.

2012-08-11  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Line.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm, lib/Devel/Trepan/DB.pm,
	t/20test-trace.t, t/data/__FILE__.right, t/data/alias.right,
	t/data/autolist.right, t/data/break.right, t/data/break2.right,
	t/data/cont.right, t/data/debug.right, t/data/display.right,
	t/data/dollar0.right, t/data/eval.right, t/data/eval2.right,
	t/data/fin.right, t/data/fin2.right, t/data/line.right,
	t/data/list1.right, t/data/list2.right, t/data/list3.right,
	t/data/list4.right, t/data/my.right, t/data/next.right,
	t/data/next2.right, t/data/seq1.right, t/data/sig.right,
	t/data/sig2.right, t/data/step.right, t/data/trace1.right,
	t/data/trace2.right, t/data/watch1.right, t/data/watch2.right: Add
	package name to location line like perl5db does. Line.pm no longer
	require package name in "info line" if it is the current package.

2012-08-11  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, Build.PL, MANIFEST, MANIFEST.SKIP, META.json,
	META.yml, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Line.pm,
	lib/Devel/Trepan/Options.pm, t/20test-__FILE__.t, t/20test-alias.t,
	t/20test-autolist.t, t/20test-break.t, t/20test-display.t,
	t/20test-dollar0.t, t/20test-eval.t, t/20test-line.t,
	t/20test-trace.t, t/Helper.pm, t/data/line.cmd, t/data/line.right: 
	Build.PL: add recommended modules and change issues and repository.
	Version follows
	http://perldoc.perl.org/perlmodstyle.html#Version-numbering.
	Line.pm: Add ranges for subroutines. DRY integration test code more.


2012-08-10  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Line.pm,
	t/data/eval.cmd, t/data/line.cmd: Start "info line". Still need to
	add a test.

2012-08-10  Rocky Bernstein <rocky@cpan.org>

	* t/20test-dollar0.t, t/20test-eval.t, t/data/__FILE__.cmd,
	t/data/__FILE__.right, t/data/dollar0.cmd, t/data/dollar0.right,
	t/data/eval2.cmd, t/data/eval2.right, t/data/my.cmd,
	t/data/my.right, t/data/sig2.cmd, t/data/sig2.right,
	t/data/watch1.cmd, t/data/watch1.right: Make evaldisplay explicit in
	tests which run eval

2012-08-10  Rocky Bernstein <rocky@cpan.org>

	* t/20test-__FILE__.t: Should have been part of last commit .

2012-08-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Options.pm: Document --fall-off-end invocation
	option.

2012-08-07  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/Options.pm, t/data/debug.cmd, t/data/debug.right,
	t/data/eval.cmd, t/data/eval.right, t/data/next2.cmd,
	t/data/next2.right: Build.PL: Bump version number. Switch the
	default eval print routine from Data::Dumper::Perltidy to
	Data::Dumper. Data::Dumper has *no* dependencies; so it will work
	more places. Also, there have been bugs in Data::Dumper::Perltidy
	that have prevented Devel::Trepan from getting installed. See
	https://rt.cpan.org/Ticket/Display.html?id=78806

2012-08-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: Interpreting eval() "filenames"
	causes problems in DB::Linecache::update_script_cache when "strict".
	Issue #8

2012-08-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm: Allow unalias
	command when terminated.

2012-08-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Msg.pm: Stray character sneaked in

2012-08-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Lexicals.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm, lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/DB.pm: Add more checks for termination to certain
	commands that pick up implicit values from a running program.

2012-08-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm: Untabify files.

2012-08-06  Rocky Bernstein <rocky@cpan.org>

	* Changes, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/Options.pm, t/20test-trace.t, t/Helper.pm: Stay
	inside debugger on normal termination. Use option --fall-off-end or
	set $DB::fall_off_on_end=1 if this isn't what you want. Issue #9.

2012-08-06  Rocky Bernstein <rocky@cpan.org>

	* t/20test-__FILE__.t, t/20test-debug.t, t/20test-dollar0.t,
	t/20test-trace.t: Shorten code even though what was there is in some
	sense a little more precise.

2012-08-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Help.pm: Forgot to add 'h'
	as an alias for 'help'. Continuation of issue #7.

2012-08-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm: "d" should be an alias
	for "delete", not "down. Remove "u" as an alias for "up". In gdb "u"
	is "unless".

2012-08-06  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes: An Interim "what's up?"

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	* t/20test-__FILE__.t: cygwin compatability and Data::Printer
	output. Again

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST: Remove duplicate file in MANIFEST

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Eval.pm: Untabify DB::Eval.pm

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/DB/Eval.pm, t/20test-__FILE__.t,
	t/20test-dollar0.t, t/data/__FILE__.cmd, t/data/__FILE__.right: Fix
	up __FILE__ and __LINE__ when running eval.

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Colors.pm, t/20test-dollar0.t: cygwin
	compatibility

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/DB/Eval.pm, t/data/next2.right: Was not picking up
	leading sigil in eval command properly when no eval suffix was
	given.

2012-08-05  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Width.p
	m, lib/Devel/Trepan/CmdProcessor/Validate.pm, t/10test-validate.t: 
	Validate.pm: bug when unlimited (or undfined) max value. Make
	minimum max-with value on "set max width" 10.

2012-08-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Abbrev.pm: Correct
	help set/show help text of "abbrev" subcommand.

2012-08-04  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, bin/trepan.pl, lib/Devel/Trepan/Core.pm,
	t/20test-dollar0.t, t/data/dollar0.cmd, t/data/dollar0.right,
	t/data/next2.right: Set $0 to be the program to be debugged.

2012-06-10  Rocky Bernstein <rocky@cpan.org>

	* t/10test-options.t, t/20test-autolist.t, t/20test-list3.t,
	t/20test-trepanpl-opts.t: Reduce "no plan" in tests.

2012-06-10  Rocky Bernstein <rocky@cpan.org>

	* t/10test-cmd-complete.t, t/10test-complete.t,
	t/10test-intf-script.t, t/10test-intf-user.t, t/10test-io-output.t,
	t/10test-io-stringarray.t, t/10test-linecache.t,
	t/10test-position.t, t/10test-proc-default.t, t/10test-proc-hook.t,
	t/10test-proc-load.t, t/10test-sighandler.t, t/10test-util.t,
	t/10test-validate.t, t/10test-watchmgr.t, t/20test-alias.t,
	t/20test-break.t, t/20test-cont.t, t/20test-debug.t,
	t/20test-display.t, t/20test-eval.t, t/20test-fin.t,
	t/20test-list1.t, t/20test-list2.t, t/20test-list4.t,
	t/20test-next.t, t/20test-next2.t, t/20test-seq1.t,
	t/20test-step.t, t/20test-trace.t, t/20test-watch1.t: Use
	done_testing() more

2012-06-10  Rocky Bernstein <rocky@cpan.org>

	* t/10test-cmd-complete.t: One tiny slight improvement in test

2012-06-10  Rocky Bernstein <rocky@cpan.org>

	* t/10test-cmd-complete.t: Add a couple of doc strings to
	t/10-test-complete.t

2012-06-08  Rocky Bernstein <rocky@cpan.org>

	* README.md, lib/Devel/Trepan.pm: Smore smalll README/perlpod
	changes

2012-06-08  Rocky Bernstein <rocky@cpan.org>

	* README.md, example/gcd-dbg.pl, lib/Devel/Trepan.pm: More mall
	README/perlpod changes gcd-dbg.pl: make sure to use the local
	Trepan.

2012-06-08  Rocky Bernstein <rocky@cpan.org>

	* README.md, lib/Devel/Trepan.pm: Small typographical changes

2012-06-08  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-06-08  Rocky Bernstein <rocky@cpan.org>

	* README.md, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/10test-db-brkpt.t,
	t/20test-break.t, t/data/break.right: Break*: Allow setting a
	breakpoint on a line even if it isn't recorded as a breakpoint.
	README.md Trepan.pm: note that we have line tracing. Files.pm:
	correct help text

2012-06-06  Rocky Bernstein <rocky@cpan.org>

	* README.md: Another typo

2012-06-06  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-06-06  Rocky Bernstein <rocky@cpan.org>

	* README.md: Fix a typo and extend the advertising.

2012-05-28  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: Test::More -> Test::Simple

2012-05-27  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: We only need Test::More in testing. It is not a run-time
	dependency.

2012-05-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm: DRY code. Reducing the duplication also
	improves error reporting.

2012-05-24  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, META.json, META.yml, README, README.md,
	lib/Devel/Trepan.pm: Get ready for release 0.2.1

2012-05-24  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, README, README.md, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm, t/20test-trace.t: Try to address some
	of the CPANTs failures. Some small doc changes

2012-05-24  Rocky Bernstein <rocky@cpan.org>

	* t/00test-pod.t: Looks like Test::Pod 1.44 first allows the "http"
	scheme in href's (L<>).

2012-05-24  Rocky Bernstein <rocky@cpan.org>

	* .gitignore: More ignored files

2012-05-24  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, META.json, META.yml, t/Helper.pm: Get ready
	for 0.2.0 release.

2012-05-23  Rocky Bernstein <rocky@cpan.org>

	* META.json, META.yml, lib/Devel/Trepan/Options.pm,
	t/20test-autolist.t: Remove duplicate plan on the "use Test::More" .


2012-05-23  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, README, lib/Devel/Trepan.pm, t/00test-pod.t,
	t/10test-options.t, t/20test-autolist.t, t/20test-trepanpl-opts.t: 
	MANIFEST: was missing some test programs README: derived from
	lib/Devel/Trepan.pm now test/00test-pod.t: boilerplate POD testing
	test/*.t: remove some failing tests based on CPANTS output. Wish
	that or the folks who run that were more responsive/helpful.

2012-04-06  Rocky Bernstein <rocky@cpan.org>

	* t/10test-io-output.t: Start IO::Output testing

2012-04-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/IO/Output.pm, t/data/eval2.right,
	t/data/fin2.right, t/data/next.right, t/data/seq1.right,
	t/data/sig.right, t/data/trace1.right: Dup STDOUT to guard against
	the application closing it and thus preventing our output from
	getting shown.

2012-03-31  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/Psh.pm: Psh.pm moved to
	Devel::Trepan::Shell

2012-03-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Alias.pm, t/20test-alias.t,
	t/data/alias.cmd, t/data/alias.right: Allow alias replacement to be
	a blank-delimited string rather than a just command name. But as
	before the first token must be an existing command name.

2012-03-10  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/Util.pm, t/10test-util.t: Expand eval? patterns. We
	now treat 'local' and 'our' the same way as 'my', e.g. local ($a,b)
	= ($v1,v2). Change behavior of eval? for "my $var = value" to just
	return value, not set $var. If you wanted to set $var, use "eval"
	not "eval?".

2012-02-23  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	http://github.com/rocky/Perl-Devel-Trepan

2012-02-22  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, README.md, t/data/next2.cmd, t/data/next2.right: 
	next2.*: be more specific about the kind of display README.md: we
	can install from CPAN

2012-02-22  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-02-22  R. Bernstein <rocky.bernstein@gmail.com>

	Merge pull request #6 from rurban/master  Fixed rlib mess and
	5.15.8 warnings

2012-02-22  Reini Urban <rurban@cpanel.net>

	* bin/.gitignore: rm bin/.gitignore as it gets installed  ...
	Installing /usr/local/share/man/man3/Devel::Trepan::Options.3
	Installing /usr/local/bin/.gitignore Installing
	/usr/local/bin/trepan.pl  Module::Build is a mess

2012-02-22  Reini Urban <rurban@cpanel.net>

	* lib/Devel/Trepan/Client.pm, lib/Devel/Trepan/Options.pm: fix rlib
	mess by using package context  rlib default is good, ../..
	definitely wrong. Do not bother FindBin, which will not work on an
	installed trepan.pl also. Use the package context and not main.

2012-02-22  Reini Urban <rurban@cpanel.net>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Complete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Handle.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Functions.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm, lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Server.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/Interface/Client.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/Server.pm,
	lib/Devel/Trepan/Interface/User.pm: get rid of defined @, warns with
	5.15.8

2012-02-19  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-02-17  Rocky Bernstein <rocky@cpan.org>

	* example/next2.pl, t/20test-next2.t, t/data/next2.cmd,
	t/data/next2.right: Add test for "next" bug just fixed

2012-02-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/Interface/User.pm: Can't rely on
	NEXT_STEPPING_EVENT for $DB::single. So we write our own checks.
	This makes 'next' slower. Save last thread id for 'next'ing.
	remove_history(): need to set default value of $which.

2012-01-16  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, META.json, META.yml, t/20test-autolist.t: Get
	ready for 0.1.9 release

2012-01-15  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/Util.pm: consult sigil in eval? and eval.
	(Previously it was just done in autoeval).

2012-01-15  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm, t/data/debug.right,
	t/data/eval.right, t/data/fin2.right, t/data/seq1.right: Don't
	need/want variables names in Data::Dumper output.

2012-01-15  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm: 
	Update Eval help text. For example describe the difference between
	eval of a statement and an expression and give short alias examples.


2012-01-15  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-01-15  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, MANIFEST, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/DB/Eval.pm, lib/Devel/Trepan/Options.pm,
	t/10test-proc-default.t, t/data/.gitignore, t/data/debug.cmd,
	t/data/debug.right, t/data/eval.cmd, t/data/eval.right,
	t/data/eval2.right: Allow optional package Data::Printer to show
	eval results.

2012-01-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/IO/Input.pm, lib/Devel/Trepan/Options.pm: 
	Options.pm: some help spelling corrections Input.pm: give $prompt a
	default value just in case...

2012-01-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/IO.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/User.pm, t/10test-load.t: Update help for
	set/show evaldisplay. gnu_readline -> term_readline.

2012-01-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/IO/Input.pm: More control over specifying whether
	or not to use Term::ReadLine.

2012-01-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/LineCache.pm: More
	aggressive about noting end

2012-01-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm: More error checking around showing
	frames.

2012-01-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/10test-linecache.t: Various
	LineCache fixes and cleanups. script_cache and file_cache hashes are
	now globals for out-of-package inspection. update_script_cache now
	stores an evcal string if it is given. List.pm: distinguish between
	a file with no lines and a file not found. Location.pm: guard
	against map_file returning undef.

2012-01-07  Rocky Bernstein <rocky@cpan.org>

	* example/gcd-dbg.pl,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB.pm,
	t/data/debug.right: Small incremental fixes. Core.pm: Don't try to
	create a second ReadLine interface in awaken. DB.pm: don't reset
	DB::event on entry. Setup may have set that. Debug.pm: need to
	explicitly reset DB::event now. Tidy eval string. gcd-dbg.pl: make
	executable

2012-01-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, t/20test-trepanpl-opts.t: Add @DB::clients
	as a global. Use like() in testing instaead of cmp_ok(..., /.../,
	'>', 0)

2012-01-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm: See
	previous commit

2012-01-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm: Guard against dbline not
	getting defined

2012-01-06  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-01-06  Rocky Bernstein <rocky@cpan.org>

	* example/nexting.pl,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm, t/data/step.right: Start
	to take advantage of the fact that dbline returns a ef object.

2012-01-05  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: Add min version on Test::More

2012-01-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Variable.pm: 
	Improve help for "set variable"

2012-01-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Breakpoint.pm,
	t/data/break2.right: Fix bug in setting a breakpoint via subroutine
	name in a file that isn't the current file. Guard against reading
	uninitialized stack value value which can happen when debugger
	called via Enbugger;

2012-01-04  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-01-04  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, META.json, META.yml: Use "portable" Columnize version
	number

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	http://github.com/rocky/Perl-Devel-Trepan

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan.pm: We are in 0.1.9 now

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	* META.json, META.yml, lib/Devel/Trepan/Options.pm: Remove merge
	conflicts.

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	I hate conflicted merges

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, META.json, META.yml, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm: Need at least 2.36 for Getopt::Long

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog: Update ChangeLog

2012-01-03  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, Changes, META.json, META.yml, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/CmdProcessor/Eval.pm, lib/Devel/Trepan/Options.pm,
	t/20test-my.t, t/20test-trace.t, t/data/trace1.right: Release 0.1.8


2012-01-02  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	http://github.com/rocky/Perl-Devel-Trepan

2012-01-02  Rocky Bernstein <rocky@cpan.org>

	* Changes, META.json, META.yml: Forgot to mention using
	Eval::WithLexicals

2012-01-02  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, Changes, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Interface/Server.pm, lib/Devel/Trepan/Options.pm,
	lib/Devel/Trepan/SigHandler.pm, t/20test-list3.t: Get ready for
	release 0.1.7

2012-01-02  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2012-01-02  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/Client.pm, t/10test-io-stringarray.t,
	t/10test-load.t, t/20test-trepanpl-opts.t: Fix some test FIXME's and
	tidy that code a little.

2012-01-02  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, Build.PL, MANIFEST, META.json, META.yml,
	bin/trepan.pl, example/my.pl, lib/Devel/Trepan/Client.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm, lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/CmdProcessor/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, t/20test-trepanpl-opts.t,
	t/data/eval.right, t/data/eval2.right, t/data/my.cmd,
	t/data/my.right, t/data/trace1.right: Adding code to evaluate in
	frames other than the top-most one via Eval::WithLexicals. It's
	flaky, but probably better than doing nothing.

2012-01-02  Rocky Bernstein <rocky@cpan.org>

	* Changes, lib/Devel/Trepan.pm, lib/Devel/Trepan/Options.pm,
	t/20test-trepanpl-opts.t, t/Helper.pm: Tests fail when not
	previously installed because rlib from Client.pm seems to flip out
	if trepan.pl isn't in the path. I don't understand why, but it's
	easy enough to add the right trepan.pl in the path, and probably
	what I want to do anyway in the tests.

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* t/20test-sig.t: This time, for sure!

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: Linecache update_cache: guard
	abs_path with test on filename for cygwin

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: ':' => ' :' so we don't confuse
	Microsoft OS's

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, MANIFEST, META.json, META.yml: Get ready for
	0.1.5 release.

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, Build.PL, MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Disassemble.pm,
	t/10test-cmd-complete.t: Move Disassemble to a separate add-on
	package. Other administrivia.

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* t/10test-options.t, t/20test-trepanpl-opts.t: Avoid STO's smokers.
	He hasn't been responsive in queries.

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, t/20test-sig.t: Reinstate signal stop test in Perl 5.8

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	Start to merge with perl-5.8 branch

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* t/20test-sig.t: Avoid test on Perl 5.8

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* t/20test-sig.t, t/data/sig.cmd, t/data/sig.right,
	t/data/sig2.cmd, t/data/sig2.right: Add sig pass test

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* t/20test-sig.t, t/data/sig.cmd: Test stopping on a signal

2012-01-01  Rocky Bernstein <rocky@cpan.org>

	* t/data/sig2.cmd, t/data/sig2.right: Test stopping on a single.

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* t/Helper.pm: Sync with master

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* t/20test-sig.t, t/Helper.pm: Wasn't passing error return in
	run_debugger

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, example/signal.pl, lib/Devel/Trepan/Core.pm,
	t/Helper.pm: Sync with master

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'perl-5.8' of github.com:rocky/Perl-Devel-Trepan
	into perl-5.8

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Client.pm, lib/Devel/Trepan/DB/Eval.pm,
	lib/Devel/Trepan/SigHandler.pm: I hate these conflicted merges.

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan into
	perl-5.8  Conflicts: 	lib/Devel/Trepan/Client.pm
	lib/Devel/Trepan/DB/Eval.pm 	lib/Devel/Trepan/SigHandler.pm

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'perl-5.8' of github.com:rocky/Perl-Devel-Trepan
	into perl-5.8

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, example/signal.pl, lib/Devel/Trepan/Core.pm,
	t/20test-sig.t, t/Helper.pm, t/data/sig.cmd, t/data/sig.right: Add
	first signal handling integration test of handle with pass through.


2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* example/signal.pl, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Breakpoint.pm,
	lib/Devel/Trepan/SigHandler.pm: Sighandler.pm: Remove git conflict
	line. Frame.pm: Handle signal handler stop a little better. rest:
	Compatiblity with 5.8 code.

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	I hate conflicted merges

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* example/signal.pl, lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/Core.pm: Adjust stack frame Core signal handler
	events. More can be done, but this is a distinct improvement.

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm, t/data/eval.cmd,
	t/data/eval.right: Add eval test case that had previously failed

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* t/data/eval.cmd, t/data/eval.right: Add eval test case that had
	previously failed

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm: Use Perl 5.8 way of
	setting $opt hash. All tests now work! YAY!

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm: Address bug in setting breakpoint
	and listing it. (20test-list4.t).

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm: 
	eval_with_return: restoring saved global variables properly. Reduce
	test failures.

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Eval.pm: eval_with_return: restoring saved
	global variables properly.

2011-12-31  rvm <you@example.com>

	* Build.PL, lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/10test-cmd-complete.t,
	t/10test-db-brkpt.t, t/10test-watchmgr.t, t/Helper.pm: Unit tests
	start working. Some of the integration tests work

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm: Some more 5.8
	compatibility tolerance

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	I hate conflicted merges

2011-12-31  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl, lib/Devel/Trepan/Client.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/Display.pm, lib/Devel/Trepan/DB/LineCache.pm,
	lib/Devel/Trepan/IO/StringArray.pm, lib/Devel/Trepan/SigHandler.pm,
	lib/Devel/Trepan/Util.pm: Fix some small bugs. Start to address
	compatibility for Perl 5.8.

2011-12-31  rvm <you@example.com>

	* Build.PL, bin/trepan.pl, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Client.pm, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Complete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm, lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Variable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Hook.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/Complete.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Backtrace.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, lib/Devel/Trepan/DB/Display.pm,
	lib/Devel/Trepan/DB/Eval.pm, lib/Devel/Trepan/DB/LineCache.pm,
	lib/Devel/Trepan/IO.pm, lib/Devel/Trepan/IO/StringArray.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/Server.pm,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm,
	lib/Devel/Trepan/SigHandler.pm, lib/Devel/Trepan/Util.pm,
	t/10test-db-brkpt.t, t/10test-util.t: Start to make it work on perl
	5.8

2011-12-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm: Remove a
	small bug and a expected warning

2011-12-28  Rocky Bernstein <rocky@cpan.org>

	* t/Helper.pm: Helper.pm: Explain why funny return code test

2011-12-28  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, lib/Devel/Trepan/SigHandler.pm, t/Helper.pm: Helper.pm:
	Tidy up output when an integration test fails

2011-12-26  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl, lib/Devel/Trepan/CmdProcessor/Command/Eval.pm: Add
	'p' as an alias for eval.

2011-12-26  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/SigHandler.pm: Saves
	debugged program handler now when it mismatches the debugger signal
	handler.

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: Don't include ExtUtils::PkgConfig.

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/Helper.pm: Reduce dependencies
	for build. Use Digest::SHA instead of Digest::SHA1. Don't use
	String::Diff.

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm: Add
	better help and completion for 'set evaldisplay'. Typo in Confirm.

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/SigHandler.pm,
	t/10test-complete.t: Work on "stop" action when signal is external
	to debugged process

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Handle.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Macros.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Signals.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/Complete.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/SigHandler.pm,
	t/10test-complete.t: Signal handling largely works! Add 'info
	signal' Add common completion method for signals. Fix a typo here
	and there.

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm: A perlish kind of bug

2011-12-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm: Close to being usable.

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/DB.pm: bin/trepan.pl: Fix up so we really
	require_relative. Return.pm: guard against undef. DB.pm futz with
	"finish" which is currently borked.

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm, t/10test-sighandler.t: Move
	sighandler code. For such a simple straightforward feature and
	implementation, this is proving to be more code than I had
	remembered.

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Util.pm: Remove Core.pm
	warnings and make strict even if we can't 'use strict'

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm: Rough cut port of Python code
	finished. Still need to go over to make it work.

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* t/10test-watchmgr.t: Add unit test for watch points

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/WatchMgr.pm, t/10test-position.t: Fix bugs in
	WatchMgr. make sure fns in demo code are not defined if not
	demo'ing.

2011-12-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm, t/10test-sighandler.t: More code
	(and thus more tests) signal handling. Still not complete though.

2011-12-23  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm, lib/Devel/Trepan/Util.pm,
	t/10test-util.t: Fill in more of the signal handling code.

2011-12-23  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm, t/10test-sighandler.t: put Signal
	Manager under Devel::Trepan namespace

2011-12-23  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/SigHandler.pm, lib/Devel/Trepan/WatchMgr.pm: Port
	a little more code.

2011-12-23  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, MANIFEST.SKIP,
	lib/Devel/Trepan/CmdProcessor/Command/Handle.pm,
	lib/Devel/Trepan/SigHandler.pm, t/10test-sighandler.t: Start signal
	handler routines - not working yet.

2011-12-22  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-22  Rocky Bernstein <rocky@cpan.org>

	* META.json, META.yml,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Client.pm,
	lib/Devel/Trepan/Interface/Server.pm,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Util.pm,
	t/10test-util.t, t/Makefile: Move Yes/No routines into
	Devel::Trepan::Util from Devel::Trepan::Interface. In preparation of
	adding a signal handler manager

2011-12-22  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm: Save %SIG before debugger modifies it.

2011-12-21  Rocky Bernstein <rocky@cpan.org>

	* example/except-bug1.pl, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Backtrace.pm, lib/Devel/Trepan/Options.pm: Add
	post-mortem debugging. For now option --port-mortem. Should add a
	"set" command too.

2011-12-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m, lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/data/break.cmd,
	t/data/break.right, t/data/debug.right, t/data/eval.right: Warn if
	we try to set a breakpoint on a "use" statement. Auto evaluation now
	looks at the statement for a sigil to get the return context by
	default.

2011-12-18  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl, lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/Options.pm: Allow user-specified debugger command
	directores via trepan.pl option --cmddir. Useful in testing without
	installing the split-out the 'shell' command which resides in a
	different project.

2011-12-18  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST.SKIP, bin/trepan.pl, data/Enbugger-trepan.patch, testit: 
	More Administriva: remove unused files and adjust MANIFEST.SKIP

2011-12-18  Rocky Bernstein <rocky@cpan.org>

	* README, README.md: More README futzing

2011-12-18  Rocky Bernstein <rocky@cpan.org>

	* README.md: More markdown futzing

2011-12-18  Rocky Bernstein <rocky@cpan.org>

	* README.md: Slightly better markdown - use headings and remove a
	blockquote

2011-12-18  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, README, README.md, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm: Administrivia: Go over readme, bump
	version and clean up Build.PL.

2011-12-16  Rocky Bernstein <rocky@cpan.org>

	* META.json, META.yml, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm: Get ready for 0.1.4 release

2011-12-16  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, lib/Devel/Trepan/Client.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Util.pm, t/10test-util.t: 
	Add to Trepan::Devel::Util a simple filename validation routine

2011-12-16  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Client.pm: (Re)use debugger user output print routines

2011-12-16  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-16  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Client.pm, lib/Devel/Trepan/Interface/Script.pm: 
	Handling commands on client side is starting to work. In particular
	.source. Handle Server error return message on client side.

2011-12-16  Rocky Bernstein <rocky@cpan.org>

	* t/10test-cmd-complete.t, t/20test-eval.t, t/data/eval2.right: Perl
	10.0 compatibility

2011-12-12  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/IO/Input.pm: Guard against Term::ReadLine::Perl
	dying on initialization.

2011-12-11  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog, Changes, META.json, META.yml, lib/Devel/Trepan.pm,
	t/10test-condition.t: Get ready for 0.1.3 release

2011-12-11  U-M-936AF0DEB90E4\Administrator <Administrator@m-936af0deb90e4.(none)>

	* lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/Condition.pm, t/10test-condition.t,
	t/10test-options.t, t/20test-eval.t, t/20test-trace.t,
	t/data/eval2.right: tests work now under strawberry Pelr and its
	DOSish filename conventions. exec -> system in Strawberry Perl and
	more $OSNAME testing. Some bugs fixed in filename canonicalization.


2011-12-09  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm: Bail out properly on
	a bad "list" command. Add some sort of "list" command completion

2011-12-08  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/Client.pm: These changes helped on
	Fedora Relaese 9 running Perl 5.10.0

2011-12-08  Rocky Bernstein <rocky@cpan.org>

	* t/20test-break.t, t/data/break2.right: Filter out Exporter.pm line
	number differences.

2011-12-07  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	t/20test-break.t, t/data/break2.cmd, t/data/break2.right: Allow
	"break FILENAME LINENUMBER" now. Test for various forms of the
	"break" command.

2011-12-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Breakpoint.pm: Handle setting breakpoints in
	files other than the current one.

2011-12-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Functions.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/20test-break.t,
	t/data/break.right: Work on "break" when a function is given.

2011-12-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm: Add
	breakpoint number completion on "info breakpoints"

2011-12-06  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-12-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm, t/20test-break.t,
	t/data/break.cmd, t/data/break.right: Suggest how to get valid
	breakpoint locations. Test errors in "breakpoint" command.

2011-12-06  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Fix up valid trace line
	accumulation which can be seen via "info file . brkpts"

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm: Minor help grammar
	change to eval

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Confirm.pm: 
	Improve help for "confirm" command

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Disassemble.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm: Bug in disassemble command.
	Add $cmdproc->{funcname}

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* t/10test-cmd-complete.t: Update complete test now that "info
	functions" has been added

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Functions.pm: 
	Start gdb-like "info functions" .

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm: 
	Completion for "info frame" is frame number completion

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/Backtrace.pm: Fix up "info frame", e.g. better
	help, nows take a frame parameter. Validate: fix in max/min checking
	caused by Perl automatic coersion

2011-12-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/Backtrace.pm, lib/Devel/Trepan/DB/LineCache.pm: 
	Go over frame handling a little bit. More later. Add preliminary
	completion on "edit" and "break" commands.

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/Complete.pm: Remove some completion debugging
	output

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm, lib/Devel/Trepan/Complete.pm: 
	Filename completion on "source" command. More will follow  -- i.e..
	edit, break, list -- as soon as I get the breakpoint line numbers
	bug fixed.

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	http://github.com/rocky/Perl-Devel-Trepan

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl, lib/Devel/Trepan/DB.pm: Remove `pwd` since that's
	OS specific. Use exec { $args[0] } @args instead of exec @args since
	that's safer.

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	http://github.com/rocky/Perl-Devel-Trepan

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm: Various "info break"
	bugs. Completion for "info breakpoints" works by allowing
	complete_with_next to deal with a constant array.

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Interactive.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/DB/Sub.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Options.pm: Don't use syntax highlighting if TERM
	is dumb (other than dumb EMACS). DB::Sub.pm guard against stack
	which might not be set. This happens when Enbugger is used.

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Interactive.pm,
	lib/Devel/Trepan/IO/Input.pm, lib/Devel/Trepan/IO/StringArray.pm,
	lib/Devel/Trepan/IO/TCPClient.pm, lib/Devel/Trepan/IO/TCPServer.pm,
	lib/Devel/Trepan/Interface/User.pm: Add "show interactive - gdb has
	something similar

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Interactive.pm: 
	Add "show interactive - gdb has something similar

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	I hate conflicted merges

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* bin/trepan.pl: Strawberry Perl has problems with exec, but not
	system()

2011-12-03  rocky <rocky@cpan.org>

	* bin/trepan.pl: Strawberry perl has problems with exec, but
	system() works

2011-12-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/Interface/Script.pm: A Script interface's msg when
	in server mode needs to use the server write. The way we do this is
	a little hacky, but it's what we use for now.

2011-12-01  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-12-01  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Client.pm: Towards client-side command
	processing.

2011-12-01  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-12-01  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Aliases.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm: Add more
	completion subroutines now that completion largely works.

2011-12-01  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Interface.pm, lib/Devel/Trepan/Interface/User.pm: 
	Switch to Term::ReadLine::Perl by default as that handles tab
	completion better and is probably more available.

2011-11-30  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, README, bin/trepan.pl, bin/trepanpl,
	lib/Devel/Trepan.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Options.pm, t/20test-trepanpl-opts.t, t/Helper.pm: 
	trepanpl -> trepan.pl because I think that's cooler.

2011-11-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/Interface/User.pm: Work on command completion more.
	Still largely broken because the Term::ReadLine::Gnu documention is
	largely opaque if not buggy.

2011-11-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Complete.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/Complete.pm, t/10test-cmd-complete.t: Fix bugs in
	"complete" command.

2011-11-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Client.pm, lib/Devel/Trepan/IO/TCPClient.pm,
	lib/Devel/Trepan/IO/TCPServer.pm: Use IO::Socket connected(); do a
	slightly more gracefult shutdown.a

2011-11-28  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Server.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/IO/TCPServer.pm,
	lib/Devel/Trepan/Interface/Server.pm: trepanpl --server option now
	logs to STDOUT. logger field is now just a file handle rather than
	an Devel::Trepan::Interface.

2011-11-28  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-11-28  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Interface/Server.pm: Fix bug in server confirm()
	caused mis-translation of the Ruby code.

2011-11-27  Rocky Bernstein <rocky@cpan.org>

	* README.md: Some README typos

2011-11-27  Rocky Bernstein <rocky@cpan.org>

	* README.md: Some README typos

2011-11-27  Rocky Bernstein <rocky@cpan.org>

	* README.md, bin/trepanpl, data/Enbugger-trepan.patch,
	lib/Devel/Trepan/Client.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Server.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/IO/TCPPack.pm,
	lib/Devel/Trepan/IO/TCPServer.pm,
	lib/Devel/Trepan/Interface/ComCodes.pm,
	lib/Devel/Trepan/Interface/Server.pm, lib/Devel/Trepan/Options.pm: 
	Out-of-process debugging starts to work.

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Options.pm: whence_file should do nothing if file
	path is absolute

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Options.pm: Add --no-readline option to trepanpl


2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm: 
	Strawberry Perl's readline doesn't seem to history commands

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm: 
	Strawberry Perl's readline doesn't seem to history commands

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Disassemble.pm,
	lib/Devel/Trepan/DB/Backtrace.pm: Allow no args to disassemble to
	mean the current frame.

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Complete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm, t/10test-cmd-complete.t: Add
	debugger command 'complete '. Some minor fixes.

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm, lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm: replace $NEED_RUNNING
	and $NEED_STACK with constants. Typo in My.pm - use $lex_type.

2011-11-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Macros.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Lexicals.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm, lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Watch.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace_Subcmd/Print
	.pm, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Variable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/Eval.
	pm, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm: Use class
	constants for MIN_ARGS, MAX_ARGS and NEEDS_RUNNING in subcommands.

2011-11-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disassemble.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Server.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm: Setting min/max
	values attempt 2. Use package constants. Disable parameter checking
	on subcommands for now..

2011-11-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disassemble.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Server.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/Core.pm: Start to remove 'our' non-package scope
	for 'use vars' which is package scope

2011-11-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command.pm: Fix Grammar in comment.


2011-11-24  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Running.pm,
	t/20test-cont.t, t/data/cont.cmd, t/data/cont.right: Fix yet another
	step/continue bug.

2011-11-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Sub.pm, t/data/eval.cmd, t/data/next.cmd: More
	bugs bugs bugs created in trying to DRY stepping code.

2011-11-24  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Lexicals.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm: Newer perls have newer restrictions. Sigh. Also got an rlib
	directory wrong and installed version was masking bad behavior.

2011-11-24  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Lexicals.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm, t/data/break.cmd, t/data/debug.cmd, t/data/fin.cmd,
	t/data/my.cmd: Bug, bugs, bugs.

2011-11-24  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Lexicals.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm: DRY "show info var" code. Add "info var lexicals".

2011-11-24  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, example/our.pl,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm: Use "info var my" code goodness of in "info var our".

2011-11-24  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, example/TCPPack.pm, lib/Devel/Trepan/BrkptMgr.pm,
	t/10test-proc-load.t, t/20test-fin.t, t/data/fin.right: tests
	somehow got broken in merging. Other administrivia.

2011-11-23  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-11-23  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Disassemble.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/IO/Input.pm: Fix bug where GNU readline was not
	set. Add "Disassemble" routine via B::Concise.

2011-11-23  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-11-23  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/Client.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Server.pm,
	lib/Devel/Trepan/IO/TCPClient.pm, lib/Devel/Trepan/IO/TCPServer.pm,
	lib/Devel/Trepan/Interface/ComCodes.pm,
	lib/Devel/Trepan/Interface/Server.pm: More work on out-of-process
	debugging. Some bugs removed, some remain. Add "server" debugger
	command.

2011-11-22  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, example/my.pl,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm, t/20test-my.t, t/data/my.cmd, t/data/my.right: Work on
	formatting "info var my" output.

2011-11-22  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-11-21  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Variable.pm: 
	Add "set variable" to allow a 'my' or 'our' variable to be set.
	Expand "info variables" to allow a list of variable values to be
	shown or all of them. More work is needed here.

2011-11-21  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of
	git://github.com/rocky/Perl-Devel-Trepan

2011-11-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm: Add "info var my" and "info var our"

2011-11-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	My.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Variables_Subcmd/
	Our.pm: Add "info var my" and info var our"

2011-11-20  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, README.md: Add markdown version of README for github.

2011-11-20  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm,
	t/data/fin.cmd, t/data/fin.right: Dry "continue" code. Don't allow
	"finish" what at a return.

2011-11-20  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, META.json, META.yml, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Sub.pm, t/20test-fin.t, t/data/fin2.cmd,
	t/data/fin2.right: DRY finish code and make it work. Add META's.

2011-11-20  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm, t/data/fin.right,
	t/data/seq1.right: Show subroutine name in location on a return.

2011-11-20  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Sub.pm, lib/Devel/Trepan/IO.pm,
	t/10test-proc-load.t, t/20test-fin.t, t/data/fin.cmd,
	t/data/fin.right, t/data/seq1.right: Fix bug in "finish" command.
	Show return subroutine on "info return". Remove shell command since
	support from Psh is probably not forthcoming and Psh is stagnant.

2011-11-20  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/Client.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Client.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/Server.pm,
	lib/Devel/Trepan/Interface/User.pm: Start top-level debugger client
	code. Remove prototypes on interfaces because they are all
	different.

2011-11-19  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/IO/TCPClient.pm,
	lib/Devel/Trepan/IO/TCPServer.pm,
	lib/Devel/Trepan/Interface/ComCodes.pm,
	lib/Devel/Trepan/Interface/Server.pm: More work on out-of-processes
	debugging. Add a "server" interface. TCP client/server IO rough cut.


2011-11-19  Rocky Bernstein <rocky@cpan.org>

	* t/10test-io-tcppack.pm, t/10test-io-tcppack.t: Oopps wrong
	extension for test program

2011-11-19  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/IO/NullOutput.pm,
	lib/Devel/Trepan/IO/TCPClient.pm, lib/Devel/Trepan/IO/TCPPack.pm,
	t/10test-io-tcppack.pm: Start work on out-of-process debugging.

2011-11-17  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, ChangeLog, Changes, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/Options.pm: Get ready for release 0.1.2

2011-11-15  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Changes to eval file handling
	which keep cygwin abs_path from not barfing

2011-11-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	t/Makefile: Add a Makefile for the t directory. Debug.pm: Correct
	some grammar/spelling typos in comments.

2011-11-15  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, t/20test-debug.t, t/data/debug.cmd,
	t/data/debug.right: Add debug test and ignore Makefile.PL

2011-11-15  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Display.pm: Update comments. clean up demo
	code.

2011-11-15  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Display.pm, lib/Devel/Trepan/DB/Eval.pm: Pass
	return type as a variable reducing the scope of one more global DB
	variable.

2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan.pm, lib/Devel/Trepan/Options.pm: In 0.1.2dev now


2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm: Tidy up eval
	code a little. A little more would be nice though.

2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm,
	lib/Devel/Trepan/Options.pm, t/20test-eval.t, t/20test-trace.t: 
	Nested debugging state saving working properly. Remove dupliate
	--command/--testing options on some tests.

2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Debug.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm,
	lib/Devel/Trepan/DB/Sub.pm: Start recursive debug via the "debug"
	command. Some work is still needed in figuring out when we've
	finished eval.

2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/IO.pm: Reduce demo mode warninngs more and more
	protoype checking.

2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/User.pm: Make use Perl's protoype
	checking more. If it means not using OO-style calls, that's ok.
	Reduce warnings when running demo code.

2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm: Undo inadvertant change to turn off trace


2011-11-13  Rocky Bernstein <rocky@cpan.org>

	* GNUmakefile, lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Sub.pm: 
	Add installdeps target

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: One more change before release 0.1.1 - allow no signing
	of dist

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan.pm, lib/Devel/Trepan/DB.pm: See above

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, Changes, GNUmakefile, MANIFEST, MANIFEST.SKIP,
	lib/Devel/Trepan/Options.pm: I said, get ready for release 0.1.1

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* ChangeLog: Get ready for 0.1.1 release

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm, t/data/break.cmd,
	t/data/break.right: Fix bug in not giving status on a simple "break"
	command.

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm: Add enable/disable
	of action and watch expressions in addition to breakpoints.

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Watch.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/WatchMgr.pm,
	t/data/watch1.right: Add watchpoint hit count.

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Watch.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, lib/Devel/Trepan/WatchMgr.pm,
	t/data/watch1.cmd, t/data/watch1.right: Add ability to show watch
	expressions in "info break". Add "info watch".

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm: A couple more
	relative_lib -> rlib's

2011-11-12  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm,
	t/20test-watch1.t, t/data/watch1.right, t/data/watch2.cmd,
	t/data/watch2.right: Make sure watch expression stop through
	continue. Go over help on various commands.

2011-11-11  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm: Add list accessor.
	Some commented-out require_lib -> rlib

2011-11-11  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Macros.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Basename.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Different.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/List.pm
	,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Stack.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/String.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Width.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace_Subcmd/Print
	.pm, lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Aliases.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/Eval.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/List.
	pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Basename.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Different.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/List.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/Stack.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/String
	.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/Width.
	pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace_Subcmd/Prin
	t.pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Version.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/IO/NullOutput.pm, lib/Devel/Trepan/IO/Output.pm,
	t/10test-cmd-kill.t, t/10test-complete.t, t/10test-condition.t,
	t/10test-db-brkpt.t, t/10test-intf-script.t, t/10test-intf-user.t,
	t/10test-io-stringarray.t, t/10test-linecache.t, t/10test-load.t,
	t/10test-options.t, t/10test-position.t, t/10test-proc-hook.t,
	t/10test-proc-load.t, t/10test-util.t, t/10test-validate.t,
	t/20test-autolist.t, t/20test-break.t, t/20test-display.t,
	t/20test-eval.t, t/20test-list1.t, t/20test-list2.t,
	t/20test-list3.t, t/20test-list4.t, t/20test-next.t,
	t/20test-seq1.t, t/20test-step.t, t/20test-trace.t,
	t/20test-watch1.t: relative_lib -> rlib

2011-11-11  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan.pm, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Hook.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Mock.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/CmdProcessor/Virtual.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/LineCache.pm,
	lib/Devel/Trepan/IO.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/IO/StringArray.pm, lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm,
	lib/Devel/Trepan/Psh.pm, lib/Devel/Trepan/WatchMgr.pm: relative_lib
	-> rlib

2011-11-10  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm, t/data/watch1.right: Remove
	stray debug print

2011-11-10  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/DB.pm, t/20test-list4.t, t/20test-watch1.t,
	t/data/list2.cmd, t/data/list3.cmd, t/data/list4.cmd,
	t/data/list4.right, t/data/watch1.cmd, t/data/watch1.right: Set
	initial value in a watchpoint, fix bugs in "list" command in
	skipping over and showing breakpoints. Shell.pm: fix up when run in
	demo code.

2011-11-10  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Watch.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Breakpoint.pm,
	lib/Devel/Trepan/WatchMgr.pm: Remove $is_eval param on idle
	callback. Start evaluate cmdprocessor routine from Eval.pm command.
	To be used in Watch.pm  Some changes that meant for previous commit:
	Show changed value on watched expression. Store $dbgr object
	properly in Core. Use Watch struct in DB.pm (meant for last commit)


2011-11-10  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Watch.pm: Watch points
	starting to work. There is still screwy magical behavior of the
	debugger in turning tracing off, and I need to evaluate the inital
	value.

2011-11-10  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/WatchMgr.pm: Add watchpoint manager. Closer to
	having watchpoints working...

2011-11-09  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Eval.pm: Start lower-level aspects of watch
	expressions. DB::event is now passed to idle as a param.

2011-11-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm: Use of qw as parenthesis again...

2011-11-07  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: use_relative -> relative_lib and need 0.2 or later

2011-11-07  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/IO.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Interface/User.pm: have_gnu_readline ->
	want_gnu_readline which is more precise. Remove commented code from
	Ruby. Reinstate shbang - I can't live without it.

2011-11-06  Rocky Bernstein <rocky@cpan.org>

	* GNUmakefile, MANIFEST, Makefile, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Interface/User.pm: Really truly allow
	Term::ReadLine to be optional.

2011-11-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Options.pm, t/10test-options.t, t/Helper.pm,
	t/data/display.cmd, t/data/eval2.cmd, t/data/next.cmd: Add --batch
	and --testing options which don't initialize a user interface.

2011-11-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/IO/Input.pm: Merge in
	some of Shlomi Fish's code to check ReadLine at run time rather than
	at compile time. Also test for Term::ReadLine::Perl.

2011-11-03  Rocky Bernstein <rocky@cpan.org>

	* bin/trepanpl, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/Condition.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Backtrace.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, lib/Devel/Trepan/DB/Display.pm,
	lib/Devel/Trepan/DB/Eval.pm, lib/Devel/Trepan/DB/LineCache.pm,
	lib/Devel/Trepan/DB/Sub.pm, t/10test-cmd-kill.t,
	t/10test-complete.t, t/10test-condition.t, t/10test-db-brkpt.t,
	t/10test-intf-script.t, t/10test-intf-user.t,
	t/10test-io-stringarray.t, t/10test-linecache.t, t/10test-load.t,
	t/10test-options.t, t/10test-position.t, t/10test-proc-hook.t,
	t/10test-proc-load.t, t/10test-util.t, t/10test-validate.t,
	t/20test-autolist.t, t/20test-break.t, t/20test-display.t,
	t/20test-eval.t, t/20test-list1.t, t/20test-list2.t,
	t/20test-list3.t, t/20test-next.t, t/20test-seq1.t,
	t/20test-step.t, t/20test-trace.t, t/20test-trepanpl-opts.t,
	t/Helper.pm: Incorporate many of the changes in pull request 3. Add
	relative_lib and DRY test code a little.

2011-11-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Macros.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Basename.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Different.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/List.pm
	,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Stack.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/String.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Width.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace_Subcmd/Print
	.pm, lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Aliases.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/Eval.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/List.
	pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Basename.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Different.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/List.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/Stack.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/String
	.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/Width.
	pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace_Subcmd/Prin
	t.pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Version.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Hook.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Mock.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/CmdProcessor/Virtual.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/LineCache.pm, lib/Devel/Trepan/IO.pm,
	lib/Devel/Trepan/IO/Input.pm, lib/Devel/Trepan/IO/NullOutput.pm,
	lib/Devel/Trepan/IO/Output.pm, lib/Devel/Trepan/IO/StringArray.pm,
	lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm,
	lib/Devel/Trepan/Psh.pm: use lib -> use relative_lib. Issue #4

2011-11-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan.pm, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/Core.pm: use_relative -> relative_lib

2011-11-03  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan.pm, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB/Breakpoint.pm,
	lib/Devel/Trepan/DB/Display.pm, lib/Devel/Trepan/DB/Eval.pm: Start
	using "use_relative" .

2011-10-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/DB/Eval.pm,
	lib/Devel/Trepan/Psh.pm: Need Psh:: on some calls since we had to
	removed "package Psh" for getting onto CPAN.

2011-10-29  R. Bernstein <rocky.bernstein@gmail.com>

	Merge pull request #2 from rurban/master  Use of qw(...) as
	parentheses is deprecated

2011-10-29  Reini Urban <rurban@cpanel.net>

	* lib/Devel/Trepan/Util.pm: Use of qw(...) as parentheses is
	deprecated

2011-10-28  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-10-28  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Colors.pm: Fix up some terminal colors.

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace_Subcmd/Print
	.pm, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Hook.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/IO/StringArray.pm: Replace uses of {}->[] with
	{}[].

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Replace more uses of {}->{} with
	{}{}.

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/Interface/User.pm: Reduce uses of {}->{}. Add
	build_require for String::Diff and configure_require of
	Module::Build.

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Psh.pm: Can we get around the CPAN indexer this
	way?

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* Changes: Admnistrivia

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST.SKIP: Administrivia

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, MANIFEST: We don't want 'TRIAL' in tarball

2011-10-27  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, Changes, MANIFEST: Get ready for 0.10 release. Build.PL
	stringify and dotify Psh version. Submit to facist kwalitee
	standards.

2011-10-26  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: Correct perl 5.010 requires.

2011-10-25  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: Add dependency on Perl 5.0.10

2011-10-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm, t/20test-eval.t,
	t/data/eval2.cmd, t/data/eval2.right: Add eval test. Handle in
	command processor command errors.

2011-10-24  Rocky Bernstein <rocky@cpan.org>

	* t/20test-eval.t, t/data/eval2.cmd, t/data/eval2.right: Towards
	being able to test recent "eval remapped" changes. Not working.

2011-10-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm: list now works on inside
	an eval string.

2011-10-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm: YAY! eval file caching to a
	temporary disk now works.

2011-10-23  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/Eval.pm, lib/Devel/Trepan/DB/LineCache.pm,
	t/10test-linecache.t, t/20test-trace.t, t/data/trace1.right: Add
	script remapping to temp file even if we can't use it right now.
	Someone we are losing @DB::dbline values on eval.

2011-10-23  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/LineCache.pm: Towards
	getting eval lines remapped. Currently slightly broken.

2011-10-23  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/Util.pm: Build.PL: add more required packages.
	others: remove warnings given by perl 5.12

2011-10-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/Psh.pm: Give instruction on how to exit psh inside
	the debugger.

2011-10-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Display.pm: Revise "display"
	help for what we have currently got.

2011-10-16  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/DB.pm, t/data/eval.cmd, t/data/eval.right: eval
	should correctly report @_ now by saving it in DB::sub and assigning
	@_ before eval. Also fix another bug in Command/Eval.

2011-10-16  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Shell.pm,
	lib/Devel/Trepan/Psh.pm, t/10test-proc-load.t: Add going into a psh
	shell. Command "shell" with alias "psh".

2011-10-15  Rocky Bernstein <rocky@cpan.org>

	* t/data/eval.cmd, t/data/eval.right: Check "my" variables in eval.


2011-10-15  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Condition.pm, t/10test-condition.t: Better valid
	condition testing

2011-10-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Undisplay.pm,
	lib/Devel/Trepan/Interface/Script.pm, t/10test-load.t,
	t/10test-proc-load.t, t/20test-display.t, t/data/display.cmd,
	t/data/display.right: Add debugger "undisplay" command, and
	display/undisplay tests.

2011-10-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Display.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Display.pm,
	lib/Devel/Trepan/DB/Eval.pm: Add first rough cut at display
	expressions.

2011-10-14  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm: Inch ever so closer towards handling display
	expressions. (Watch variables won't be too far behind.)

2011-10-14  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, t/20test-eval.t,
	t/Helper.pm, t/data/eval.cmd, t/data/eval.right: I had broken eval
	and autoeval when cleaning up and making more OO stepping code. Add
	first eval/autoeval test Removes old "got" files now as well.

2011-10-14  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm: 
	Simplify stepping code. Now should handle next+, next-.

2011-10-14  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, t/20test-next.t,
	t/data/next.cmd, t/data/next.right: Bug in "next" (step over)
	probably because of DB::step issues. Work around this by setting
	that explicitly before exit of process_commands.

2011-10-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm: Make Trepan::Devel::Core callback more OO
	reducing some (but not all) of the transitional porting bogusness.
	To do: the "next" (step through) command isn't work quite right.
	Something with DB::signal=2  scoping?

2011-10-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/DB.pm: Move closer to having display expressions
	working.

2011-10-12  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Action.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, lib/Devel/Trepan/DB/Eval.pm: 
	Start perl5-ish "action" command.

2011-10-12  Rocky Bernstein <rocky@cpan.org>

	* README: This time, for sure?

2011-10-12  Rocky Bernstein <rocky@cpan.org>

	* README: This time, for sure?

2011-10-12  Rocky Bernstein <rocky@cpan.org>

	* README: Typo in README

2011-10-12  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, MANIFEST, MANIFEST.SKIP,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/20test-seq1.t,
	t/data/seq1.cmd, t/data/seq1.right: Backtrace.pm, Retrun.pm: need to
	set $MAX_ARGS explicitly. Running.pm, Step.pm, Condition.pm: move
	controller code from command to Running.pm. seq1.*: start testing a
	more complex command sequnece including bt, c, and set return.

2011-10-11  Rocky Bernstein <rocky@cpan.org>

	* t/data/trace2.cmd, t/data/trace2.right: Forgot a couple of files
	on last commit

2011-10-11  Rocky Bernstein <rocky@cpan.org>

	* t/20test-trace.t: One more trace test, this time using "set trace
	print" and continue

2011-10-11  Rocky Bernstein <rocky@cpan.org>

	* t/20test-trace.t, t/Helper.pm, t/data/trace1.cmd,
	t/data/trace1.right: Add trace test.

2011-10-10  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, MANIFEST.SKIP: Administrivia

2011-10-10  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-10-10  Rocky Bernstein <rocky@cpan.org>

	* Artistic, MANIFEST, README, gpl-3.0.txt, ignore.txt: Add a README
	and license info.

2011-10-09  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Display.pm: Start support for display
	expressions. Much more work needed

2011-10-09  Rocky Bernstein <rocky@cpan.org>

	* data/Enbugger-trepan.patch: Enbugger patch for trepan support

2011-10-09  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace_Subcmd/.giti
	gnore,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Trace_Subcmd/Print
	.pm, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace_Subcmd/.git
	ignore,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Trace_Subcmd/Prin
	t.pm, lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Options.pm: Add -x
	and --trace option. (For Herb Chong)

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Hook.pm: Add "set timer"

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Macro.pm: macro help typo

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/List.
	pm, t/20test-autolist.t, t/data/autolist.cmd, t/data/autolist.right: 
	Add "set/show autolist". Correct/improve some command documentation.


2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Hook.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/10test-proc-hook.t,
	t/10test-proc-load.t, t/20test-list3.t, t/data/list1.right,
	t/data/list2.right, t/data/list3.cmd, t/data/list3.right: Fix "list"
	help documentation. Start adding command hook code. Fix bug in
	listing files and mysterious bug in listing highlighed source code.


2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/List.pm: list .
	fixed and checked list - checked

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* t/data/list2.cmd, t/data/list2.right: Add temporary break checking
	to list with breakpoint test.

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/20test-list2.t,
	t/data/list1.cmd, t/data/list2.cmd, t/data/list2.right: "list" now
	shows breakpoint/action locations

2011-10-08  Rocky Bernstein <rocky@cpan.org>

	* example/test-module.pm, example/test-require.pl,
	lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/LineCache.pm, t/20test-list1.t,
	t/data/list1.cmd, t/data/list1.right: Work on "list" command.

2011-10-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/LineCache.pm: "list" command starts to work.

2011-10-06  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/List.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm: Add "list" command - not
	finished yet though.

2011-10-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm: Start parse_position. Not working
	yet though.

2011-10-04  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-09-29  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, example/nexting.pl, t/20test-break.t, t/20test-step.t,
	t/Helper.pm, t/data/.gitignore, t/data/step.cmd, t/data/step.right: 
	Add second debugger command integration test: step. Break out
	run_debugger into helper Helper.pm

2011-09-28  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/20test-break.t,
	t/data/.gitignore, t/data/break.cmd, t/data/break.right: My first
	real integration test of running some debugger commands (break,
	delete and continue).

2011-09-28  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, t/20test-trepanpl-opts.t: First integration test of
	sorts

2011-09-28  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, MANIFEST.SKIP, t/10test-cmd-kill.t,
	t/10test-complete.t, t/10test-condition.t, t/10test-db-brkpt.t,
	t/10test-intf-script.t, t/10test-intf-user.t,
	t/10test-io-stringarray.t, t/10test-linecache.t, t/10test-load.t,
	t/10test-options.t, t/10test-position.t, t/10test-proc-load.t,
	t/10test-util.t, t/10test-validate.t, t/test-cmd-kill.t,
	t/test-complete.t, t/test-condition.t, t/test-db-brkpt.t,
	t/test-intf-script.t, t/test-intf-user.t, t/test-io-stringarray.t,
	t/test-linecache.t, t/test-load.t, t/test-options.t,
	t/test-position.t, t/test-proc-load.t, t/test-util.t,
	t/test-validate.t: Add first integration test for trepanpl --help
	and --version options. Rename tests to accomodate unit versus
	integration tests.

2011-09-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Options.pm: Add
	--basename --highlight and --no-highlight options.

2011-09-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Options.pm: Add
	--command -c option to read a command file in preparation for
	integration testing. Also add --help and --man.

2011-09-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/DB.pm: On "continue position", do not continue if
	position is not breakable.

2011-09-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm: On "continue position", don't continue if
	position is not breakable.

2011-09-27  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Breakpoint.pm: Attempt
	simplification and correction of DB::cont and DB::set_break. Really
	need to add "parse_position".

2011-09-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Macro.pm: One more "macro"
	doc change

2011-09-26  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Macro.pm: Update macro help
	string

2011-09-26  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, MANIFEST, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Macros.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Macro.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Aliases.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, lib/Devel/Trepan/IO.pm: Add
	macros via Perl's anonymous subroutines. Need to fill in MIN/MAX
	args more explicitly until I figure out how to DRY code. Various
	small bugs fixed.

2011-09-25  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help/command.txt: 
	Backtrace.pm: add 'T' as an alias. command.text Ruby -> Perl.

2011-09-25  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm: 
	Fix up "delete" command.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Delete.pm: Work on "delete"
	command.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm: break doc
	improvements.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm: Allow breakpoint
	conditions in "break" command.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Sub.pm: Move DB:sub from
	DB.pm to DB::Sub.pm

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm: Completion on eval?
	now works: it completes the expr part of the source line.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm: set MIN_ARGS as
	appropriate on Condition and Help.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Condition.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/Condition.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Eval.pm, t/test-condition.t: Add "condition"
	command. Move more DB::eval from DB.pm to DB/Eval.pm and localize
	better.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm: Address bugs in showing
	help categories. Change up/down short help.

2011-09-24  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Disable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Enable.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Breakpoint.pm: "info
	break" works now. Added "enable" and "disable" commands.

2011-09-23  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Breakpoints.pm,
	lib/Devel/Trepan/CmdProcessor/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm: Start "info break" and use
	reworked breakpoint system and breakpont manager.

2011-09-22  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/Util.pm, t/test-cmd-kill.t: Add signal name
	completion on "kill" command.

2011-09-22  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm: Add command
	completion for "unalias".

2011-09-22  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm, t/test-load.t: Fix completion
	on: help xx yy

2011-09-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/test-db-brkpt.t: Put away for
	tonight

2011-09-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm, lib/Devel/Trepan/DB/Breakpoint.pm: 
	Fill in more deletion by breakpoint number code.

2011-09-21  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/BrkptMgr.pm, lib/Devel/Trepan/DB/Breakpoint.pm: 
	More work on breakpoint manager. Deleting a breakpoint doesn't fully
	delete from DB::Breakpoint yet.

2011-09-20  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm: Add
	breakpoint number to "info program".

2011-09-20  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/BrkptMgr.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm, t/test-db-brkpt.t: A Breakpont
	now contains its breakpoint number. Minimal test of Breakpoint.
	Start a breakpoint manager to deal with a collection of breakpoints
	- not finished yet.

2011-09-20  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Breakpoint.pm: Split off breakpoint routines
	from DB.pm and put in DB/Breakpoint.pm

2011-09-20  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm: Replace breakpoint/action string hack with
	a Class:Struct that contains more information.

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Different.pm: 
	Grammar

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Running.pm: Pick up "set different"
	in step by default.

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* example/nexting.pl, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/Position.pm, t/test-position.t: Logic added to
	support step+, step-, set different.

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm, t/test-load.t: Fill out
	"set different" skipping more. Add "set" completion test.

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/List.
	pm~, lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/Complete.pm, t/test-load.t: More work on command
	completion.

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm, t/test-load.t: Completion of
	things like "set basename " now works. Many other kinds of
	completion still need work though.

2011-09-17  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Load.pm, t/test-load.t: A little
	more progress on command completion. "Set basename" works although
	"set basename " doesn't.

2011-09-16  Rocky Bernstein <rocky@cpan.org>

	* bin/trepanpl, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/Core.pm, lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm: We
	can now read a user debugger profile, e.g. ~/.treplrc and pass
	options trepanpl to Core via TREPANPL_OPTS. Some bugs fixed in the
	Script interface and shy away from a more massive shutdown on every
	Interface destroy.

2011-09-16  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/LineCache.pm,
	t/test-linecache.t: Start handling eval string remapping. Not
	working yet.

2011-09-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/Interface/User.pm, t/test-intf-user.t,
	t/test-proc-load.t: Add some fringe user-interface and load and
	command-completion tests.

2011-09-15  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/Eval.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/List.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Auto_Subcmd/List.
	pm~, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm: Add
	show auto {list,eval}, although set/show autolist doesn't do
	anything useful yet.

2011-09-14  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/.gitig
	nore,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/Eval.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Auto_Subcmd/List.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/List.pm
	, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm: Add
	"set autoeval" and "set autolist" .

2011-09-14  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Width.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm: 'help
	subcmd *' and 'help subsubcmd *' work now.

2011-09-13  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm: Help subcmd
	now works. Need to do the same thing for sub-sub commands.

2011-09-13  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/List.pm
	,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Stack.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/String.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Width.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/.gitig
	nore,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/List.p
	m,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/Stack.
	pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/String
	.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Max_Subcmd/Width.
	pm, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm: Add
	set/show max commands.

2011-09-13  Rocky Bernstein <rocky@cpan.org>

	*
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/.gitign
	ore,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max_Subcmd/Width.p
	m, lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Subsubcmd.pm: Added
	first sub sub command: set max width.

2011-09-11  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Max.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm: Subsub
	commands working to the point of not bombing and providing help.

2011-09-10  Rocky Bernstein <rocky@cpan.org>

	* example/eval.pl, lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Work on debugging through eval
	strings.

2011-09-10  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST: Update manifest

2011-09-09  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/Complete.pm, t/test-complete.t: More work on
	command completion. completing the second word of a command works.
	More work is needed.

2011-09-09  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm: "frame" with no arguments is
	"frame 0". Some progress on command completion.

2011-09-09  Rocky Bernstein <rocky@cpan.org>

	* Build.PL, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/EvalDisplay.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/Options.pm: Allow showing eval results using
	Data::Dumper::PerlTidy. Add set/show evaldisplay to control how to
	display results, e.g to use PerlTidy or not.

2011-09-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm: Save eval results in @DB::D.

2011-09-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Eval.pm: Split off
	eval routine from rest of DB.

2011-09-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm: Document new eval
	behavior

2011-09-08  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Running.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/Util.pm, t/test-util.t: Add eval@, eval%, and
	eval$: ability to specify the return type for an eval.

2011-09-07  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST, t/test-intf-script.t, t/test-io-stringarray.t: Add a
	couple of unit tests for new stringarray and script interface code.
	Much much more should be done, but it's a start.

2011-09-07  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, MANIFEST: Add MANIFEST file to git

2011-09-07  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Source.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/IO/NullOutput.pm, lib/Devel/Trepan/Interface.pm: 
	Add rudimenary "source" command. Fix bugs in "alias" no args, "step"
	no args (but different kind of bug) and accommodate in a hacky way
	input differences in Interface.

2011-09-06  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/IO.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/IO/InputBase.pm,
	lib/Devel/Trepan/IO/StringArray.pm, lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/Script.pm,
	lib/Devel/Trepan/Interface/User.pm, t/test-validate.t: In
	preparation for the "source" command, or reading debugger scripts:
	Add a "script interface". By is there more code here than I would
	like.

2011-09-05  Rocky Bernstein <rocky@cpan.org>

	* Makefile, lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/DB/Backtrace.pm: If not debug at outset, e.g.
	Enbugger used, then $DB:stack_depth could be wrong.

2011-09-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/DB/LineCache.pm: LineCache.pm: wasn't interpolating
	filename key. Files.pm: guard against more of these kinds of
	uninitialized variables.

2011-09-05  Rocky Bernstein <rocky@cpan.org>

	* Makefile, example/gcd-dbg.pl, lib/Devel/Trepan/DB.pm: DB.pm: Now
	works with Enbugger. Some improvements (like proper stack tracking)
	are desirable. Remove more of the unneeded OO DB stuff which got in
	the way. Makefile: compatiblity for us old-timers. gcd-dbg.pl: an
	example of using with Enbugger.

2011-09-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Frame.pm: Break backtrace formatting
	to two lines if it is long.

2011-09-05  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: Remove some bugs, and warnings
	and change some comments

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* bin/trepanp, bin/trepanpl, lib/Devel/Trepan.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/DB/LineCache.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Options.pm: Can
	now list which lines are ok to breakpoint at. LineCache is now uses
	strict. trepanp -> trepanpl.

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Options.pm, t/test-options.t: Handle absolute and
	relative files correctly. Start unit test.

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Options.pm: Ooops forgot to initialize a variable


2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* bin/trepanp,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/Options.pm, lib/Devel/Trepan/Util.pm: trepanp:
	Check that the debugged Perl program is syntactically valid and
	resolve file name using PATH if we can't find it. Start options
	processing. Files.pm: fill out showing file attributes.

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm: Fill out more of "info
	files"

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Files.pm: Start
	"info files" .

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubsubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Remove test warnings. Lame attempt
	at Subsubmgr.

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm: Some limited command
	completion on the "help" command.

2011-09-04  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Down.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Up.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/Backtrace.pm: Add "up" and "down" commands.
	Backtrace shows function and are routine we are in, not the routine
	that we the line has called.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/DB/Backtrace.pm, lib/Devel/Trepan/DB/LineCache.pm,
	t/test-linecache.t: Start working on frame switching commands.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: Get SHA1 and start testing
	LineCache.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* Build.PL: Add syntax highlight and SHA1 dependencies.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/DB/Backtrace.pm: Backtrace now includes stopped
	line.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Eval.pm,
	lib/Devel/Trepan/Util.pm, t/test-util.t: Add eval and eval?

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm: Fill in more of the
	completion command code.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* MANIFEST.SKIP, lib/Devel/Trepan/DB.pm: Remove DB::lines() since
	one use LineCache instead

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/DB/LineCache.pm: LineCache: Remove a whole bunch of
	warnings. Set/Show: handle "auto" prefix hack. Hightlight: call
	DB:inecache on highlight reset.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/DB/LineCache.pm: We now show syntax highlighting in
	location strings.

2011-09-03  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/Colors.pm, lib/Devel/Trepan/DB/LineCache.pm: 
	LineCache now performs Syntax highlighting.

2011-09-02  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/DB/LineCache.pm: Closer to having syntax
	highlighting working.

2011-09-02  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: Save stat information.

2011-09-02  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: More code working.

2011-09-02  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: Start to get code working.

2011-09-01  Rocky Bernstein <rocky@cpan.org>

	* t/test-complete.t: Finish completion testing.

2011-09-01  Rocky Bernstein <rocky@cpan.org>

	* t/test-complete.t: Start completion tests.

2011-08-31  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/DB/LineCache.pm: First cut at port of Perl
	program.

2011-08-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/Util.pm, t/test-util.t: Add uniq_abbrev and fill
	out tests for that.

2011-08-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Aliases.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Unalias.pm: Add "unalias".
	Trepan::Command->name() an be use instead of
	Trepan::Command->{name}.

2011-08-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Alias.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Aliases.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Basename.pm: Add
	ability to add and show aliaes. Still need "unalias" though.

2011-08-30  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/Sub.pm: DB: move @stack
	and $stack_level from DB.pm to Sub.pm. Allow giving an optional
	backtrace stack count.

2011-08-29  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Edit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm: Added 'Edit' command.
	'Finish' command now checks to see if parameter is an integer.

2011-08-29  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Return.pm,
	lib/Devel/Trepan/DB/Sub.pm: Add a "set return" command

2011-08-29  Rocky Bernstein <rocky@cpan.org>

	* lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Highlight.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm, lib/Devel/Trepan/DB.pm: 
	Add set/show highlight.

2011-08-28  Rocky Bernstein <rocky@cpan.org>

	* example/fns.pl, lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Finish.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Program.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Info_Subcmd/Return.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm, lib/Devel/Trepan/DB.pm,
	lib/Devel/Trepan/DB/Sub.pm, lib/Devel/Trepan/Interface/User.pm: Add
	"info frame", info "program" and "info return". Add rudimentary
	"finish".

2011-08-28  Rocky Bernstein <rocky@cpan.org>

	Merge branch 'master' of github.com:rocky/Perl-Devel-Trepan

2011-08-28  r <rocky@gnu.org>

	* lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm: Add Term::ANSIColor bold and
	underline to message "section" and "errmsg".

2011-08-28  r <rocky@gnu.org>

	* lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm: Add Term::ANSIColor bold and
	underline to message "section" and "errmsg".

2011-08-07  Rocky Bernstein <rocky@cpan.org>

	* .gitignore, Build.PL, MANIFEST.SKIP, bin/.gitignore, bin/trepanp,
	example/.gitignore, example/gcd.pl, lib/Devel/.gitignore,
	lib/Devel/Trepan.pm, lib/Devel/Trepan/.gitignore,
	lib/Devel/Trepan/CmdProcessor.pm,
	lib/Devel/Trepan/CmdProcessor/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command.pm,
	lib/Devel/Trepan/CmdProcessor/Command/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Backtrace.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Break.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Continue.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Help/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Help/README,
	lib/Devel/Trepan/CmdProcessor/Command/Help/command.txt,
	lib/Devel/Trepan/CmdProcessor/Command/Help/examples.txt,
	lib/Devel/Trepan/CmdProcessor/Command/Help/filename.txt,
	lib/Devel/Trepan/CmdProcessor/Command/Help/location.txt,
	lib/Devel/Trepan/CmdProcessor/Command/Help/suffixes.txt,
	lib/Devel/Trepan/CmdProcessor/Command/Kill.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Next.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Quit.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Restart.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Basename.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Set_Subcmd/Different.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Abbrev.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Basename.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Confirm.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Different.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Timer.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Show_Subcmd/Version.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Step.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/.gitignore,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/Core.pm,
	lib/Devel/Trepan/CmdProcessor/Command/Subcmd/SubMgr.pm,
	lib/Devel/Trepan/CmdProcessor/Command/TBreak.pm,
	lib/Devel/Trepan/CmdProcessor/Default.pm,
	lib/Devel/Trepan/CmdProcessor/Frame.pm,
	lib/Devel/Trepan/CmdProcessor/Help.pm,
	lib/Devel/Trepan/CmdProcessor/Load.pm,
	lib/Devel/Trepan/CmdProcessor/Location.pm,
	lib/Devel/Trepan/CmdProcessor/Mock.pm,
	lib/Devel/Trepan/CmdProcessor/Msg.pm,
	lib/Devel/Trepan/CmdProcessor/Validate.pm,
	lib/Devel/Trepan/CmdProcessor/Virtual.pm,
	lib/Devel/Trepan/Complete.pm, lib/Devel/Trepan/Core.pm,
	lib/Devel/Trepan/DB.pm, lib/Devel/Trepan/DB/.gitignore,
	lib/Devel/Trepan/DB/Backtrace.pm, lib/Devel/Trepan/DB/Sub.pm,
	lib/Devel/Trepan/IO/InOutBase.pm, lib/Devel/Trepan/IO/Input.pm,
	lib/Devel/Trepan/IO/InputBase.pm,
	lib/Devel/Trepan/IO/NullOutput.pm, lib/Devel/Trepan/IO/Output.pm,
	lib/Devel/Trepan/IO/base.pm, lib/Devel/Trepan/Interface.pm,
	lib/Devel/Trepan/Interface/.gitignore,
	lib/Devel/Trepan/Interface/User.pm, lib/Devel/Trepan/Util.pm,
	t/.gitignore, t/test-load.t, t/test-util.t, testit: Port from my
	Ruby "trepanning" debuggers, e.g. rb-trepanning.

2011-08-07  R. Bernstein <rocky@cpan.org>

	* Initial commit of Trepanning Debugger for Perl