Revision history for Test-BrewBuild
2.05 2016-05-06
- added [brewbuild] section to config file (closes #128)
- cleaned up test logic due to failing MSWin tests
- switched from CPAN::ReverseDependencies to MetaCPAN::Client, as the
former was using MetaCPAN::API which is depricated, and failing to
install on MSWin systems. (I sent a PR to the dist which fixes it). We
now have our own revdep discovery process
- fixed logic issue where -1 wasn't being used in instance_install(),
breaking the ability to install all perl instances (fixes #130)
2.04 2016-04-27
- Results from MSWin now properly show the _bit suffix for the perl used
in test results (closes #124)
- instance_install() when installing randomly doesn't attempt duplicate
versions any longer (fixes #123)
- cleaned up formatting of revdep returned output (closes #126)
- on Unix, we now include Release Candidate perl instances when using
random install, eg perl-5.24.0-RC3 (closes #127)
- various log entry cleanup (closes #112)
2.03 2016-04-26
- brewbuild can now dispatch the most basic of testing to remotes via
the -D and -t flags. For more advanced remote testing, use bbdispatch
(closes #122)
- changed to searching %PATH% for binaries as opposed to using 'where'
on MSWin, as on pre 2k3, 'where' didn't exist (closes #117)
- moved setting the brewbuild command default from bbdispatch to
Dispatch (closes #118)
- On MSWin, we now accept the _32/_64 suffixes in --install, otherwise
we'll default to 64-bit. This suffix will be stripped on Unix systems
if dispatching to both Unix and Windows testers (closes #114)
- removed prerequisite of needing to be an Administrator user on MSWin
from the Tutorial (closes #119)
- fixed a series of out-of-order debug logging message entries
- added a timeout param to instance_install(), default 300 secs. If an
install takes longer than this, it'll roll out the changes and log an
entry of the problem (closes #110)
- enhanced the argument handling for brewbuild to be much more
resilient and specific to help prevent executing rogue commands on
the remote testers (closes #66)
- POD updates
2.02 2016-04-22
- fixed issue in T::BB::Tester where we weren't checking for the 'new'
param, hence we weren't doing install if 'new' was set
- added brief SYNOPSIS in Dispatch
- fixed issue in Tester where the log scalar wasn't being reset after a
run (we also now shutdown() the socket after a finished run)
- correct issues preventing the brewbuild -i and -n flags from working
correctly on remote testers
- dzil dists now get a authordeps run by default, logging organized
(closes #104)
2.01 2016-04-22
- no functional changes
- POD updates/fixes
2.00 2016-04-21
- added T::BB::workdir() as a common source for workdir retrieval
- major POD updates
1.05_02 2016-04-20
- we now set up a log file within Tester for BrewBuild if Tester is
logging, but not to STDOUT
- added a POD document for the config file
- created a Tutorial for the distributed testing environment setup
1.05_01 2016-04-19
- we can now distribute test builds to remote Test::BrewBuild test
servers
- bbdispatch and bbtester scripts added, which handle the test
distribution network/systems
- Dispatch.pm and Tester.pm modules, containing the APIs for the
distribution setup
- we no longer now print anything out by default; everything is
returned, and its up to end-user to handle
- major debug logging improvements
- significant code cleanup and tests implemented
- added/improved upon the flags for the ``brewbuild'' script
1.05 2016-04-04
- we're now Dist::Zilla compliant and tested (closes #33)
- added _dzil_shim() and _dzil_unshim() for Dist::Zilla distributions
- bumped prereq of TestAgainst plugin to 0.06
- added -T (--selftest), to prevent recursive testing loops when
testing this distribution
- POD updates
- stderr.bblog as well as cpanm build.log files are now aggregated into
the FAIL log reports (closes #61 and #62)
- added -T, --selftest, to avoid recursive testing of Test::BrewBuild
with the BBDEV_TESTING env var set
1.04 2016-04-01
- ensure FAIL files are created properly and test (closes #53)
- fix issue where --on wasn't setting up the environment correctly
(fixes #54)
- on Unix, we catch if an installed version is attempting to be
installed, instead of letting perlbrew handle it (closes #50)
- prereq 'version' added to correctly get version info from pre 5.10
(fixes #51)
- renamed --version|-v to --install|-i
- added --notest|-N, allows install/remove without running exec()
(closes #49)
- added --setup|-s, displays Windows and Unix test platform setup guide
- added --legacy|-L. Due to the fact ``cpanm'' requires 5.8.1, and we
use it in the default exec plugin, we won't install versions lower
than that, unless this flag is set
- FAIL logs are now stored in a temp directory, then moved to './bblog'
after completion, ensuring manifest.t tests don't fail (fixes #56)
- fixed bug where on Windows, if a module build fails, the revdeps
could still pass (fixes #57)
- POD updates
- created berrybrew PR dnmfarrell/brewberry#16 which added the --with
arg to exec
- bumped prereq of Test::BrewBuild::Plugin::TestAgainst to 0.05 due
to the Windows path issues
1.03_03 2016-03-29
- --revdep, auto-testing of CPAN down-river modules working very well
(work on #39)
- added t/dev-1xx tests, need perlbrew/berrybrew installed to run. Set
BBDEV_TESTING environment variable to run these tests (these tests
can take a very long time to process, and currently, may be
unreliable)
- added Archive::Extract prereq for BBDEV_TESTING
- fixed bug where --version wasn't doing anything
- fixed bug on Windows where instance_remove() was removing the
currently in-use perl instance
- if an invalid arg is sent in, we now print help screen and exit
(closes #45)
- fix bug in results(), where the regex wasn't capturing properly on
Windows
- added blurb in SYNOPSIS about the importance of having a central
cpanm (closes #44)
- corrected a whole bunch of inconsistencies between win/nix throughout
the dev test writing
- we now re-check brew_info after an install, so we don't exit
prematurely thinking no perls are installed, even after a --new 1
(closes #46)
- had to change the DATA section in the plugins to one cmd per line,
due to Windows not properly able to manage PATH env var on each exec
run. The actual command to perform the tests *must* be the last line
executed
- added BrewExec::using(), sends back the exact version we're using, so
remove_instance() does the right thing on Windows (fixes #47)
- disabled 'on' tests on Windows, as berrybrew doesn't have a --with
flag for 'exec'. We warn() if it's attempted
- added examples/config.txt, shows a working Windows %PATH% env setup
- began, albeit lightly, code cleanup (#36)
- set objectives for v1.05 (full win/nix compat, document pristine
testing environment, fix all outstanding non-wishlist issues and
at minimum, document irregularities of test failures beyond this
modules control)
1.03_02 2016-03-26
- FAIL strategy completed. If there's STDERR output, we write it all to
brewbuild_err.bblog. FAIL reports go into $perlver.bblog, and if
we're using a plugin that accepts a module, we put fail reports into
Tested::Module-$perlver.bblog, with the '::' replaced into '-'. The
results (PASS and FAIL) are now all displayed at the end of output
for easy identification (closes #43)
- fixed case-insensitivity bug with options. -R and -r now do the
respective Right Thing
- cpanm is now called with the -v flag on the --test-only portion of
the default plugin
1.03_01 2016-03-25
- if --args is passed in, brewbuild runs the number of times the list
has elements, and on each pass, the plugin receives the current arg
in the list
- --args executes --new and --remove only on first run through the loop
- plugins now get a copy of the parent log for cloning
- added --revdep, tests all CPAN reverse dependencies on the module
you're testing
- added prereq CPAN::ReverseDependencies for --revdep
- Plugin::Simple v0.06 now required (fixes #28, #30)
- documented $log as first param to a plugin (closes #35)
- cleaned up SYNOPSIS (closes #38)
- add tests for --args param for plugins (closes #32)
- we now croak if there's no 't/' dir, as there'd be nothing to test
(closes #34)
- removed -R flag, -r was interfering. We'll figure this out later
- cleaned up logging. By default 0 will display install/remove actions,
all other logging needs debug 5-7 (closes #37)
1.02 2016-03-24
- default plugin now uses cpanm for all installs, rendering the build
system in use irrelevant (should work for distzilla) (closes #29)
- added new --args arg to 'brewbuild', this is an aref that gets
dereferenced and the list passed into the 'brewbuild_exec()' sub
in each plugin
- fixed abstract issue (closes #27)
- removed t/11-results.t, as we don't return results anymore
- modified logging levels
1.01 2016-03-22
- set README to the binary, not the module... d'oh!
1.00 2016-03-22
- removed Plugin.pm, we now use Plugin::Simple for the plugin init work
- BUILD_REQUIRES Mock::Sub v1.06 for testing purposes, so we can test
without *brew installed (and if it is, we don't want to be managing
instances)
- finally got around to implementing a near full test suite (closes #4)
- removed version() from BrewCommands.pm, not needed
- bumped major version number now that we're tested and stable
0.06 2016-03-21
- added '--on' param, send in a list of perl versions to run against,
instead of the default all (closes #17)
- renamed 'count' param to 'new', kept change for backwards
compatibility reasons (closes #23)
- we can now load non-installed local plugins by specifying the full or
relative path name plus name of file to the --plugin param (closes
#24)
- all *brew command creation moved to Test::BrewBuild::BrewCommands.pm
(closes #19)
- new round of unit tests
- added debug logging to Test::BrewBuild::BrewCommands
- added warning in Makefile.PL and skip a bunch of tests if *brew isn't
installed
- 'brewbuild' command warns with a link to the respective *brew, and
exits if it isn't installed
0.05 2016-03-18
- we now recognize when Module::Build is being used, as opposed
to EUMM, and it works properly (fixes #12)
- *brew exec commands are now loaded via a plugin architecture. Set by
the '-p|--plugin' or an environment variable, plugin writing is
exceptionally simplistic
- renamed --reload arg to --remove
- fix undef issue in Plugin.pm if a plugin name can't be found
- --debug param now accepts a level param (0-7) to set the level (added
Logging::Simple as prereq)
- remove all prereqs from Makefile.PL that are already in core
(closes #15)
- add prereqs that aren't in core as of v5.8 into Makefile.PL (closes
#20)
- completely peppered the modules with various debugging level
statements
- added POD in Test::BrewBuild::Plugin
0.04 2016-03-16
- testing now properly works across all installed perls
- the exec file is now auto-generated with File::Temp, and unlinked
after use (closes #9)
- install now skips and warns (w/ debug) if a version it's trying to
install is already installed (closes #8)
- added POD for both the script and module (closes #5)
0.03 2016-03-01
- App::cpanminus now a prereq
- fixed issue in split in results() (fixes #6)
0.02 2016-02-23
- implemented Object Oriented approach
- added _test_file(), returns the test file brew will run (uses
File::Temp)
- added t/01-test_file.t
- added POD (closes #3)
- version arg now accepts multiple values (closes #1)
- fixed defined-or to be 5.8 compatible
0.01 2016-02-23
First version, released on an unsuspecting world.