package App::Netdisco;
use strict;
use warnings;
use 5.010_000;
our $VERSION = '2.061001';
use App::Netdisco::Configuration;
=head1 NAME
App::Netdisco - An open source web-based network management tool.
=head1 DESCRIPTION
Netdisco is a web-based network management tool designed for network
administrators. Data is collected into a PostgreSQL database using SNMP.
Some of the things you can do with Netdisco:
=over 4
=item *
B<Locate> a machine on the network by MAC or IP and show the switch port it
lives at
=item *
B<Turn off> a switch port, or change the VLAN or PoE status of a port
=item *
B<Inventory> your network hardware by model, vendor, software and operating
system
=item *
B<Pretty pictures> of your network
=back
L<App::Netdisco> provides a web frontend with built-in web server, and a
backend daemon to gather information from your network, and handle
interactive requests such as changing port or device properties.
=over 4
=item *
See the demo at: L<https://netdisco2-demo.herokuapp.com/>
=item *
L<Docker images|https://store.docker.com/community/images/netdisco/netdisco> are also available
=back
We have several other pages with tips for
L<installation tips|https://github.com/netdisco/netdisco/wiki/Install-Tips>,
L<understanding and troubleshooting Netdisco|https://github.com/netdisco/netdisco/wiki/Troubleshooting>,
L<notes for specific device vendors|https://github.com/netdisco/netdisco/wiki/Vendor-Tips>,
and L<all the configuration options|https://github.com/netdisco/netdisco/wiki/Configuration>.
You can also speak to someone in the C<#netdisco@libera> IRC channel, or on
the L<community email list|https://lists.sourceforge.net/lists/listinfo/netdisco-users>.
Before installing or upgrading please always review the latest
L<Release Notes|https://github.com/netdisco/netdisco/wiki/Release-Notes>.
=head1 Dependencies
Netdisco has several Perl library dependencies which will be automatically
installed. However it's required that you first install the following
operating system packages, if not the installation will most likely fail
further down the road.
On Ubuntu/Debian:
root:~# apt-get install libdbd-pg-perl libsnmp-perl libssl-dev libio-socket-ssl-perl curl postgresql build-essential
On Fedora/Red-Hat:
root:~# yum install perl-core perl-DBD-Pg net-snmp-perl net-snmp-devel openssl-devel curl postgresql-server postgresql-contrib make automake gcc
root:~# postgresql-setup initdb
root:~# systemctl start postgresql
root:~# systemctl enable postgresql
On openSUSE:
root:~# zypper refresh
root:~# zypper install curl automake gcc make postgresql postgresql-server openssh openssl net-snmp perl perl-DBD-Pg perl-SNMP
On FreeBSD systems please see L<our FreeBSD tips|https://github.com/netdisco/netdisco/wiki/FreeBSD-Install>.
On OpenBSD systems please see L<our OpenBSD tips|https://github.com/netdisco/netdisco/wiki/openbsd-install>.
With those installed, please check that your system's clock is correct. We
also recommend that you run Netdisco in UTC (time zone +0) if possible, to
avoid issues with Daylight Savings Time changes.
Create a user on your system called C<netdisco> if one does not already exist.
We'll install Netdisco and its dependencies into this user's home area, which
will take about 250MB including MIB files.
root:~# useradd -m -p x -s /bin/bash netdisco
Netdisco uses the PostgreSQL database server. Install PostgreSQL (at least
version 9.6) and then change to the PostgreSQL superuser (usually
C<postgres>). Create a new database and PostgreSQL user for the Netdisco
application:
root:~# su - postgres
postgres:~$ createuser -DRSP netdisco
Enter password for new role:
Enter it again:
postgres:~$ createdb -O netdisco netdisco
You may wish to L<amend the PostgreSQL
configuration|https://github.com/netdisco/netdisco/wiki/Install-Tips#enable-md5-authentication-to-postgresql>
so that local connections are working. The default PostgreSQL configuration
can also use tuning for modern server hardware. We recommend that you use one of the following
tools to tune your C<postgresql.conf> file:
=over 4
=item L<postgresqltuner|https://github.com/jfcoz/postgresqltuner>
Script that will check your operating system resources and settings as well as your
running PostgreSQL database and will make recommendations based on actual load. Works
on new netdisco installs but will make the best suggestions once the database contains
a bigger dataset.
=item L<pgtune (fork)|https://pgtune.leopard.in.ua>
A web based application which will recommend which parameters to change.
=item L<pgtune|https://github.com/elitwin/pgtune>
Program to auto-tune your C<postgresql.conf>, regretfully not updated in a while.
=back
=head1 Installation
The following is a general guide which works well in most circumstances. It
assumes you have a user C<netdisco> on your system, that you want to perform
an on-line installation, and have the application run self-contained from
within that user's home. There are alternatives: see the
L<Deployment|https://github.com/netdisco/netdisco/wiki/Install-Tips>
documentation for further details.
To avoid muddying your system, use the following script to download and
install Netdisco and its dependencies into the C<netdisco> user's home area
(C<~/perl5>):
su - netdisco
curl -L https://cpanmin.us/ | perl - --notest --local-lib ~/perl5 App::Netdisco
Link some of the newly installed apps into a handy location:
mkdir ~/bin
ln -s ~/perl5/bin/{localenv,netdisco-*} ~/bin/
Test the installation by running the following command, which should only
produce a status message (it's just a test - you'll start the daemons
properly, later on):
~/bin/netdisco-backend status
=head1 Configuration
Make a directory for your local configuration and copy the configuration
template from this distribution:
mkdir ~/environments
cp ~/perl5/lib/perl5/auto/share/dist/App-Netdisco/environments/deployment.yml ~/environments
chmod 600 ~/environments/deployment.yml
Edit the file ("C<~/environments/deployment.yml>") and change the database
connection parameters to match those for your local system (that is, the
C<name>, C<user> and C<pass>).
In the same file uncomment and edit the C<domain_suffix> setting to be
appropriate for your local site. Change the C<community> string setting if
your site has different values.
Have a quick read of the other settings to make sure you're happy, then move
on. See
L<Configuration|https://github.com/netdisco/netdisco/wiki/Configuration> for
further details.
=head1 Initialisation
The database either needs configuring if new, or updating from the current
release of Netdisco (1.x). You also need vendor MAC address prefixes (OUI
data) and some MIBs if you want to run the backend daemon. The following
script will take care of all this for you:
~/bin/netdisco-deploy
If this is a new installation of Netdisco 2, answer yes to all questions. If
you wish to deploy without Internet access, see the
L<Deployment|https://github.com/netdisco/netdisco/wiki/Install-Tips>
documentation.
=head1 Startup
Run the following command to start the web-app server as a background process:
~/bin/netdisco-web start
The web app listens on port 5000 (for example C<< http://localhost:5000/ >> or
C<< http://yourhost.example.com:5000/ >>).
Run the following command to start the job control daemon (device polling,
port control, etc):
~/bin/netdisco-backend start
=head1 First Run
After installing Netdisco for the first time, you must manually discover at
least one device on your network. Choose a device which speaks CDP, FDP, or
LLDP and knows about its neighbors; Netdisco will then start following this
chain of neighbors to discover the rest of your network.
Either go to the web interface and enter an IP or fully qualified domain name,
OR perform the following step at the command line:
~/bin/netdisco-do discover -d {name or IP address of a switch or router}
=head1 Further Reading
We have several pages with tips for
L<alternate deployment scenarios|https://github.com/netdisco/netdisco/wiki/Install-Tips>,
L<understanding and troubleshooting Netdisco|https://github.com/netdisco/netdisco/wiki/Troubleshooting>,
L<tips and tricks for specific platforms|https://github.com/netdisco/netdisco/wiki/Vendor-Tips>,
and L<all the configuration options|https://github.com/netdisco/netdisco/wiki/Configuration>.
You can also speak to someone in the C<#netdisco@libera> IRC channel, or on
the L<community email list|https://lists.sourceforge.net/lists/listinfo/netdisco-users>.
Before installing or upgrading please always review the latest
L<Release Notes|https://github.com/netdisco/netdisco/wiki/Release-Notes>.
=head1 Upgrading from 2.x
Always review the latest L<Release Notes|https://github.com/netdisco/netdisco/wiki/Release-Notes>.
Then the process below should be run for each installation:
# upgrade Netdisco
~/bin/localenv cpanm --notest App::Netdisco
ln -sf ~/perl5/bin/{localenv,netdisco-*} ~/bin/
# apply database schema updates, update MIBs and Vendor MACs
~/bin/netdisco-deploy
# restart web service (if you run it)
~/bin/netdisco-web restart
# restart the backend workers (wherever you run them)
~/bin/netdisco-backend restart
Furthermore, whenever you upgrade your Operating System, you must delete the
C<~/perl5> directory and re-run the following command, to update Netdisco's C
library bindings:
curl -L https://cpanmin.us/ | perl - --notest --local-lib ~/perl5 App::Netdisco
=head1 Tips and Tricks
=head2 Searching
The main black navigation bar has a search box which is smart enough to work
out what you're looking for in most cases. For example device names, node IP
or MAC addresses, VLAN numbers, and so on.
=head2 Command-Line Device and Port Actions
Most significant Device jobs and Port actions, as well as several
troubleshooting and housekeeping duties, can be performed at the command-line
with the L<netdisco-do> program. For example:
~/bin/netdisco-do -D discover -d 192.0.2.1
See the L<netdisco-do documentation|netdisco-do> for further details.
=head2 Import Topology
Netdisco 1.x had support for a topology information file to fill in device
port relations which could not be discovered. This is now stored in the
database (and edited in the web interface). To import a legacy topology file,
run:
~/bin/localenv nd-import-topology /path/to/netdisco-topology.txt
=head2 Database API
Bundled with this distribution is a L<DBIx::Class> layer for the Netdisco
database. This abstracts away all the SQL into an elegant, re-usable OO
interface. See the L<Developer|https://github.com/netdisco/netdisco/wiki/Developing>
documentation for further information.
=head2 Plugins
Netdisco includes a Plugin subsystem for customizing the web user interface and backend daemon.
See L<Web Plugins|https://github.com/netdisco/netdisco/wiki/Web-Plugins>
and L<Backend Plugins|https://github.com/netdisco/netdisco/wiki/Backend-Plugins>
for further information.
=head2 Extensions
Using the Plugins mechanism, it's also easy to write new commands (or actions)
for Netdisco. For example, an action has been added to L<generate RANCID
configuration|App::Netdisco::Worker::Plugin::MakeRancidConf>.
=head2 Developing
Lots of information about the architecture of this application is contained
within the L<Developer|https://github.com/netdisco/netdisco/wiki/Developing> documentation.
=head1 AUTHOR
Oliver Gorwits <oliver@cpan.org>
=head1 CONTRIBUTORS
Netdisco was created at the University of California, Santa Cruz (UCSC),
Networking and Technology Services (NTS) department. UCSC continues to support
the development of Netdisco by providing development servers and beer.
Original development by Max Baker, with significant contributions from Mark
Boolootian and Jim Warner (through whose ideas Netdisco was born and shaped),
Bill Fenner, Jeroen van Ingen, Eric Miller, Carlos Vicente, and Brian de Wolf.
Other contributions (large and small) by Mike Hunter (UCB), Brian Wilson
(NCSU), Bradley Baetz (bbaetz), David Temkin (sig.com), Edson Manners (FSU),
Dmitry Sergienko (Trifle Co, .ua), Remo Rickli (PSI, Switzerland),
Jean-Philippe Luiggi (sagem.com), A.L.M Buxey (Loughborough University, UK),
Kevin Cheek (UMICH), John Bigrow (bnl.gov), George Pavel (llnl.gov), Charles
Goldsmith (wokka.org), Douglas M. McKeown (saintmarys.edu), Revital Shvarzman
(York U, Ontario), Walter Gould (Auburn U), Lindsay Druet and Colin Palmer (U
of Waikato, Hamilton NZ), Dusty Hall (Auburn U), Jon Monroe (center pointe),
Alexander Barthel, Bill Anderson, Alexander Hartmaier (t-systems.at), Justin
Hunter (Arizona State U), Jethro Binks (U of Strathclyde, Glasgow), Jordi
Guijarro (UAB.es), Sam Stickland (spacething.org), Stefan Radman (CTBTO.org),
Clint Wise, Max Kosmach, Bernhard Augenstein, Sebastian Roesch and Nick
Nauwelaerts (aquafin.be).
We probably forgot some names - sorry about that :-(.
Deep gratitude also goes
to the authors and communities of all the other software that Netdisco is
built upon.
=head1 COPYRIGHT AND LICENSE
This software is copyright (c) 2011-2023 by The Netdisco Developer Team.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the Netdisco Project nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE NETDISCO DEVELOPER TEAM BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=cut
1;