proxr_relay_control.pl - Control the NCD ProXR family of relay controllers
proxr_relay_control.pl --port SerialPort --baud Baud --command Command --bank BankNumber --relay RelayNumber {--help}
Specify the serial port used to communicate with the controller.
Specify the baud rate used to communicate with the controller. DEFAULT: --baud 115200
Specify the command. Following commands are recognized: BANK_STATUS - Print the status of all relays in the specified bank BANK_ON - Turn ON all relays in the specified bank BANK_OFF - Turn OFF all relays in the specified bank STATUS - Print the status of the relay in the specified bank ON - Turn ON the relay in the specified bank OFF - Turn OFF the relay in the specified bank ALL_ON - Turn ON all relays on all banks ALL_OFF - Turn OFF all relays on all banks DEFAULT: --command STATUS
Specify the bank number of the relay. This should be a number 1 to 255.
Specify the number of the relay. This should be a number 0 to 7.
Print version information and exit.
Display basic help.
Display more detailed help.
proxr_relay_control.pl is used to control the NCD ProXR family of relay controllers
To install Device::ProXR, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Device::ProXR
CPAN shell
perl -MCPAN -e shell install Device::ProXR
For more information on module installation, please visit the detailed CPAN module installation guide.