NetApp::Filer -- OO Class for managing NetApp Filer devices
use NetApp::Filer; my $filer = NetApp::Filer->new({ hostname => $hostname_of_nasfiler, ssh_identity => "/path/to/ssh/identify/file", }); my $filer = NetApp::Filer->new({ hostname => $hostname_of_nasfiler, protocol => 'telnet', telnet_password => $telnet_password, });
This class implements methods for communication with a NetApp Filer device. Both ssh and telnet are supported, but only ssh is really recommended. NetApp doesn't support concurrent access via telnet, and the error checking using ssh is far more robust. Not to mention, you can configure secure access via ssh without using passwords, but telnet access will always require a password.
This method takes a hash reference of arguments, and returns a NetApp::Filer object to be used to communicate with the specified filer.
The arguments are as follows:
NetApp::Filer->new({ # Required arguments hostname => $hostname, # Optional arguments username => $username, ssh_identify => $ssh_identity, ssh_command => [ @ssh_command ], protocol => 'ssh' | 'telnet', telnet_password => $telnet_password, telnet_timeout => $telnet_timeout, cache_enabled => 0 || 1, cache_expiration => $cache_expiration, });
The value of this argument is a string, which is the hostname of the filer to connect to.
The username to use for communication. Defaults to 'root'.
The ssh identify file to use for ssh communication. If not specified then ssh will be invoked without the -i argument, and will use whatever default identify file is setup for the current user.
In practice, this argument will almost always be required, but the code allows it to be optional.
If the specified file doesn't exist, then a fatal exception is raised.
An array reference representing the ssh command to be used to communication. Defaults to just ['ssh'].
Don't use this argument to specify the identity via -i. Instead, use the ssh_identify argument. If you need to specify certain ssh options, for example StrictHostKeyChecking, then use this argument. For example:
my $filer = NetApp::Filer->new({ hostname => $somenasfiler, ssh_command => [qw( ssh -o StrictHostKeyChecking=no )], });
This option is a string, either 'ssh' or 'telnet'. The default, and recommended, protocol is ssh. While telnet is supported, only one concurrent root telnet session per filer is allowed, and the error checking over telnet is far less robust than ssh.
This option is a string, and specified the root password to use when connecting via telnet. Note that password based ssh connectivity is not supported, and telnet access, while supported, is not recommended. The author uses the telnet support for only one thing: installing the ssh keys, and configuring ssh access.
NOTE: The caching mechanism is considered experimental. For one thing, it depends on using a patched version of Memoize::Expire, which is still not yet available on CPAN. Use with caution.
This option has a boolean value, and is used to disable the internal caching of the results of several API calls. By default, the cache is disabled. If enabled, then the result of any of the following NetApp::Filer methods will be cached, using Memoize:
get_aggregate get_volume get_qtree
To enable caching of these API calls, set cache_enabled to a true value. The cached values will expire (see the next option), unless the expiration value is set to 0.
This option is an integer, and is the number of seconds to cache results of the above API calls. The default value is 10 seconds. Setting this value to 0 will prevent the cached values from expiring at all.
Returns a NetApp::Filer::Version object.
Returns a list of NetApp::Filer::License objects, each of which represents a single licensed service on the filer. Note that if the service is "not licensed", it is ignored. Only services with active of expired licensed are returned.
Returns a single NetApp::Filer::License object for the specified service.
Adds a license using the specified code. Returns a boolean value only.
Deleted the license for the specified service. Returns a boolean value only.
Returns a list of strings, each of which is the name of an aggregate on the filer.
Returns a list of NetApp::Aggregate objects, each of which represents an aggregate on the filer.
Returns a single NetApp::Aggregate object for the specified aggregate name.
Create an aggregate using the specified arguments, and returns the NetApp::Aggregate object that represents it. The arguments are as follows:
my $aggregate = $filer->create_aggregate( # Required arguments name => $name, # Optional arguments raidtype => 'raid0' | 'raid4' | 'raid_dp', raidsize => $raidsize, disktype => 'ATA' | 'FCAL' | 'LUN' | 'SAS' | 'SATA' | 'SCSI', diskcount => $diskcount, disksize => $disksize, rpm => $rpm, language => $language, snaplock => 'Compliance' | 'Enterprise', mirrored => 1, # -m traditional => 1, # -v force => 1, # -f disks => [ # To specify a single set of disks: 'disk1', 'disk2', .... # To specify two sets of disks: [ 'disk1', 'disk2', .... ], [ 'diskn', 'disktn+1', .... ], ], );
Destroy an aggregate using the specified arguments. The arguments are as follows:
$filer->destroy_aggregate( # Required arguments name => $name, );
Returns a list of strings, each of which is the name of a volume on the filer.
Returns a list of NetApp::Volume objects, each of which represents a volume on the filer.
Returns a single NetApp::Volume object for the specified volume name.
Returns a list of strings, each of which is the name of a qtree on the filer.
Returns a list of NetApp::Qtree objects, each of which represents a single qtree on the filer.
Returns a single NetApp::Qtree object for the specified qtree name. The name must in the form of a pathname, for example:
/vol/volume_name/qtree_name
The qtree_name is optional if querying the object for a volume's qtree.
Creates a qtree on the filer. The arguments are as follows:
$filer->create_qtree( # Required arguments name => $name, # Optional arguments mode => $mode, security => 'unix' | 'ntfs' | 'mixed', oplocks => 0 | 1, );
The name of the qtree to create.
The UNIX mode bits to use when creating the qtree.
The security of the qtree. This must be one of: unix, ntfs, or mixed.
This option specified whether or not oplocks are to be enabled on the qtree. The value is interpreted in a boolean context, true meaning "enabled" and false meaning "disabled".
Sets the snapmirror state on the filer to the specified value, which must be either of the strings "off" or "on".
Returns a string, either "off" or "on", indicating whether or not snapmirror is turned off or on for this filer.
Returns a list of NetApp::Snapmirror objecte, each of which represents a single snapmirror relationship on the filer.
There is one general purpose method to retrieve all of the NFS exports on a filer, and 4 special purpose ones that make it easy to see the difference between the contents of /etc/exports, and the live exports reported by "exportfs".
Returns a list of NetApp::Filer::Export objects, each of which represents an NFS export on the filer.
Returns a list of NetApp::Filer::Export objects, each of which represents a permanent export, which is one found in the /etc/exports file.
Returns a list of NetApp::Filer::Export objects, each of which represents a temporary export, which is one NOT found in the /etc/exports file. Temporary exports are ones created manually, using "exportfs -io", or by using the "exportfs -b" option to fence clients, or any other command which creates a live NFS export that has not yet been written to /etc/exports, and which will not survive a reboot of the filer.
Returns a list of NetApp::Filer::Export objects, each of which represents a active export. Active exports are those reported by the "exportfs" command. They can be permanent, if they are found in /etc/exports, or temporary, if created by hand.
Returns a list of NetApp::Filer::Export objects, each of which represents a inactive export. An inactive export is a permanent export found in /etc/exports, but which is NOT found in the list of active exports reported by "exportfs". If the options of a permanent export are changed, but not saved to /etc/exports (eg. re-export something with "exportfs -io"), then the active, temporary export for that same path, and the inactive, permanent export in /etc/exports can both exist concurrently.
To install NetApp, copy and paste the appropriate command in to your terminal.
cpanm
cpanm NetApp
CPAN shell
perl -MCPAN -e shell install NetApp
For more information on module installation, please visit the detailed CPAN module installation guide.