NAME

Catalyst::Authentication::Credential::HTTP - HTTP Basic and Digest authentication for Catalyst

VERSION

version 1.018

SYNOPSIS

use Catalyst qw/
    Authentication
/;

__PACKAGE__->config( authentication => {
    default_realm => 'example',
    realms => {
        example => {
            credential => {
                class => 'HTTP',
                type  => 'any', # or 'digest' or 'basic'
                password_type  => 'clear',
                password_field => 'password'
            },
            store => {
                class => 'Minimal',
                users => {
                    Mufasa => { password => "Circle Of Life", },
                },
            },
        },
    }
});

sub foo : Local {
    my ( $self, $c ) = @_;

    $c->authenticate({}, "example");
    # either user gets authenticated or 401 is sent
    # Note that the authentication realm sent to the client (in the
    # RFC 2617 sense) is overridden here, but this *does not*
    # effect the Catalyst::Authentication::Realm used for
    # authentication - to do that, you need
    # $c->authenticate({}, 'otherrealm')

    do_stuff();
}

sub always_auth : Local {
    my ( $self, $c ) = @_;

    # Force authorization headers onto the response so that the user
    # is asked again for authentication, even if they successfully
    # authenticated.
    my $realm = $c->get_auth_realm('example');
    $realm->credential->authorization_required_response($c, $realm);
}

# with ACL plugin
__PACKAGE__->deny_access_unless("/path", sub { $_[0]->authenticate });

DESCRIPTION

This module lets you use HTTP authentication with Catalyst::Plugin::Authentication. Both basic and digest authentication are currently supported.

When authentication is required, this module sets a status of 401, and the body of the response to 'Authorization required.'. To override this and set your own content, check for the $c->res->status == 401 in your end action, and change the body accordingly.

TERMS

Nonce: A nonce is a one-time value sent with each digest authentication request header. The value must always be unique, so per default the last value of the nonce is kept using Catalyst::Plugin::Cache. To change this behaviour, override the store_digest_authorization_nonce and get_digest_authorization_nonce methods as shown below.

METHODS

new $config, $c, $realm

Simple constructor.

init

Validates that $config is ok.

authenticate $c, $realm, \%auth_info

Tries to authenticate the user, and if that fails calls authorization_required_response and detaches the current action call stack.

Looks inside $c->request->headers and processes the digest and basic (badly named) authorization header.

This will only try the methods set in the configuration. First digest, then basic.

The %auth_info hash can contain a number of keys which control the authentication behaviour:

realm

Sets the HTTP authentication realm presented to the client. Note this does not alter the Catalyst::Authentication::Realm object used for the authentication.

domain

Array reference to domains used to build the authorization headers.

This list of domains defines the protection space. If a domain URI is an absolute path (starts with /), it is relative to the root URL of the server being accessed. An absolute URI in this list may refer to a different server than the one being accessed.

The client will use this list to determine the set of URIs for which the same authentication information may be sent.

If this is omitted or its value is empty, the client will assume that the protection space consists of all URIs on the responding server.

Therefore, if your application is not hosted at the root of this domain, and you want to prevent the authentication credentials for this application being sent to any other applications. then you should use the use_uri_for configuration option, and pass a domain of /.

authenticate_basic $c, $realm, \%auth_info

Performs HTTP basic authentication.

authenticate_digest $c, $realm, \%auth_info

Performs HTTP digest authentication.

The password_type must be clear for digest authentication to succeed. If you do not want to store your user passwords as clear text, you may instead store the MD5 digest in hex of the string '$username:$realm:$password'.

Catalyst::Plugin::Cache is used for persistent storage of the nonce values (see "Nonce"). It must be loaded in your application, unless you override the store_digest_authorization_nonce and get_digest_authorization_nonce methods as shown below.

Takes an additional parameter of algorithm, the possible values of which are 'MD5' (the default) and 'MD5-sess'. For more information about 'MD5-sess', see section 3.2.2.2 in RFC 2617.

authorization_required_response $c, $realm, \%auth_info

Sets $c->response to the correct status code, and adds the correct header to demand authentication data from the user agent.

Typically used by authenticate, but may be invoked manually.

%opts can contain domain and algorithm, which are used to build %the digest header.

store_digest_authorization_nonce $c, $key, $nonce

get_digest_authorization_nonce $c, $key

Set or get the $nonce object used by the digest auth mode.

You may override these methods. By default they will call get and set on $c->cache.

authentication_failed

Sets the 401 response and calls $ctx->detach.

CONFIGURATION

All configuration is stored in YourApp->config('Plugin::Authentication' => { yourrealm => { credential => { class => 'HTTP', %config } } }.

This should be a hash, and it can contain the following entries:

type

Can be either any (the default), basic or digest.

This controls authorization_required_response and authenticate, but not the "manual" methods.

authorization_required_message

Set this to a string to override the default body content "Authorization required.", or set to undef to suppress body content being generated.

password_type

The type of password returned by the user object. Same usage as in Catalyst::Authentication::Credential::Password

password_field

The name of accessor used to retrieve the value of the password field from the user object. Same usage as in Catalyst::Authentication::Credential::Password

username_field

The field name that the user's username is mapped into when finding the user from the realm. Defaults to 'username'.

use_uri_for

If this configuration key has a true value, then the domain(s) for the authorization header will be run through $c->uri_for(). Use this configuration option if your application is not running at the root of your domain, and you want to ensure that authentication credentials from your application are not shared with other applications on the same server.

require_ssl

If this configuration key has a true value then authentication will be denied (and a 401 issued in normal circumstances) unless the request is via https.

no_unprompted_authorization_required

Causes authentication to fail as normal modules do, without calling $c->detach. This means that the basic auth credential can be used as part of the progressive realm.

However use like this is probably not optimum it also means that users in browsers ill never get a HTTP authenticate dialogue box (unless you manually return a 401 response in your application), and even some automated user agents (for APIs) will not send the Authorization header without specific manipulation of the request headers.

broken_dotnet_digest_without_query_string

Enables support for .NET (or other similarly broken clients), which fails to include the query string in the uri in the digest Authorization header, contrary to rfc2617.

This option has no effect on clients that include the query string; they will continue to work as normal.

RESTRICTIONS

When using digest authentication, this module will only work together with authentication stores whose User objects have a password method that returns the plain-text password. It will not work together with Catalyst::Authentication::Store::Htpasswd, or Catalyst::Authentication::Store::DBIC stores whose password methods return a hashed or salted version of the password.

SUPPORT

Bugs may be submitted through the RT bug tracker (or bug-Catalyst-Authentication-Credential-HTTP@rt.cpan.org).

There is also a mailing list available for users of this distribution, at http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst.

There is also an irc channel available for users of this distribution, at #catalyst on irc.perl.org.

AUTHOR

יובל קוג'מן (Yuval Kogman) <nothingmuch@woobling.org>

CONTRIBUTORS

Tomas Doran <bobtfish@bobtfish.net>
Karen Etheridge <ether@cpan.org>
Sascha Kiefer <esskar@cpan.org>
Devin Austin <devin.austin@gmail.com>
Ronald J Kimball <rjk@linguist.dartmouth.edu>
Jess Robinson <cpan@desert-island.me.uk>
Ronald J Kimball <rjk@tamias.net>
Tomas Doran <tdoran@yelp.com>
Ton Voon <ton.voon@opsera.com>
J. Shirley <jshirley+cpan@gmail.com>
Brian Cassidy <bricas@cpan.org>
Jonathan Rockway <jon@jrock.us>

COPYRIGHT AND LICENCE

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.

To install Catalyst::Authentication::Credential::HTTP, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Catalyst::Authentication::Credential::HTTP

CPAN shell

perl -MCPAN -e shell
install Catalyst::Authentication::Credential::HTTP

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)