NAME

Inline::Ruby - Write Perl subroutines and classes in Ruby.

SYNOPSIS

   print "9 + 16 = ", add(9, 16), "\n";
   print "9 - 16 = ", subtract(9, 16), "\n";

   use Inline Ruby;

   __END__
   __Ruby__

   def add(a, b)
     a + b
   end

   def subtract(a, b)
     a - b
   end

DESCRIPTION

The Inline::Ruby module allows you to put Ruby source code directly "inline" in a Perl script or module. It sets up an in-process Ruby interpreter, runs your code, and then examines Ruby's symbol table, looking for things to bind to Perl.

The process of interrogating the Ruby interpreter only occurs the first time you run your Ruby code. The namespace is cached, and subsequent calls use the cached version. Of course, your Ruby code must still be run every time your run the Perl script -- but Inline::Ruby already knows the results of running it.

Using the Inline::Ruby Module

Using Inline::Ruby will seem very similar to using any other Inline language, thanks to Inline's consistent look and feel.

This section will explain the different ways to use Inline::Ruby. For more details on Inline, see 'perldoc Inline'.

Importing Functions

Using functions defined in Ruby is just like using Perl subs. You just supply the source code to Inline::Ruby, and then use them.

   use Inline Ruby => <<'END';
   def doit
     ...
   end
   END

   doit();

Importing Classes

If you're written a library in Ruby, it's probably object-oriented. Binding Ruby classes to Perl is as easy as telling Ruby to import the class library.

   use Inline Ruby;

   my $obj = SomeClass->new;

   __END__
   __Ruby__

   # Pretend SomeClass is defined in an external library
   require 'SomeClass'

Ruby Configuration Options

For information on how to specify Inline configuration options, see Inline. This section describes each of the configuration options available for Ruby.

BIND_TYPE or BIND_TYPES

Normally, Inline::Ruby binds classes, modules, and functions into Perl. That can be really big namespace polluter, so you can tell Inline::Ruby to ignore functions, for example:

   use Inline Ruby => DATA => BIND_TYPES => [undef, qw(classes modules)];

ITER

When Inline::Ruby binds a Ruby class, module, or function into a Perl package, it also binds a function named iter to the package. iter is used to set up an iterator block when calling Ruby methods.

It's conceivable that the word iter will conflict with an actual function in the class -- if that happens, you can override the name of the iter function using this configuration option.

   use Inline Ruby => DATA => ITER => 'my_iter';

FILTERS

Like several other Inline languages, Inline::Ruby allows you to preprocess your Inline::Ruby code with a custom filter:

   use Inline Ruby => DATA => FILTER => \&my_filter;

Inline::Ruby Features

There are several cool topics worth mentioning specially:

  1. Perl Subs as Iterator Blocks

  2. Perl Subs as Proc Objects

  3. Exceptions

The following few sections describe each topic and give examples.

Perl Subs as Iterator Blocks

Ruby has very primitive looping support -- all the libraries and builtins use iterators, which provide the same functionality with more power.

Here's an example of iterating over the elements of an Array in Ruby:

   array = [1, 2, 3]
   array.each { |x|
     print "array.each printing array element: #{x}\n"
   }

Here's an example writing a function which calls an iterator:

   def call_iter
     yield "hello, iterator!"
   end

Ruby's yield keyword invokes the block passed the the function. There can only be one block passed to each function. A function can invoke the block several times, though. Like Perl's anonymous subroutines, Ruby's blocks are closures: they remember the context in which they were defined, so they have access to local variables defined at that point.

Inline::Ruby allows you to pass a Perl subroutine reference as an iterator block. That means whenever yield is called, the Perl subroutine will be called with the arguments to yield.

Here's an example:

   use Inline Ruby;

   sub block { print "Ruby says: @_\n" }

   no_iter();
   iter(\&block)->call_iter;

   __END__
   __Ruby__

   def no_iter
     print "no block\n"
   end

   def call_iter
     yield "hello, block!"
   end

As you can see, calling a global function with an iterator is slightly more complicated than just calling a regular function. Why not just pass the subroutine in the parameter list? Because that would actually pass it as a Proc object, which is also supported in Ruby (see "Perl Subs as Proc Objects").

That was functions. What about methods?

   use Inline Ruby;

   $obj = Iterator->new(1, "2", [3, 4], {5 => 6});
   $obj->iter(\&my_iter)->each;

   sub iter {
       use Data::Dumper;
       print Dumper \@_;
   }

   __END__
   __Ruby__

   class Iterator
     def initialize(*elements)
       @elements = elements
     end
     def each
       for i in @elements
         yield i
       end
     end
   end

That example showed an instance method being called. Class methods are very similar -- you just call the method on the class, not an instance of it:

   Iterator->iter(\&my_iter)->some_class_iterator(@args);

There are six combinations of iterators and function types, all supported by Inline::Ruby:

   global_function();
   iter(\&my_iter)->global_iterator();
   Class->class_method();
   Class->iter(\&my_iter)->class_iterator();
   $obj->instance_method();
   $obj->iter(\&my_iter)->instance_iterator();

Ruby also allows you to prototype a function definition to pass the block in as an argument:

   def function(arg1, arg2, arg3, &b)
     b.call(arg1, arg2, arg3)
   end

   function(1, 2, 3) { |x| print "hello #{x}\n" }

Passing a Perl Block to such a function is just like passing a Perl Block to any other function:

   iter(\&my_block)->function($arg1, $arg2, $arg3);

Ruby also allows you to pass "real" compiled blocks around. The next section talks about that.

Perl Subs as Proc Objects

Like Perl, Ruby allows variables to contain subroutine references. They're called Procs in Ruby, and they're very similar to compiled blocks. You created them by calling Proc.new { }, which returns an object with a call method. A Proc is not allowed to call yield.

Perl subroutines are very similar to Ruby's Proc: they can't call yield (Perl doesn't have it) and they are closures (which makes them suitable for calling from Ruby).

If you pass a code ref as a parameter to a Ruby function or method, it will be converted to a Proc object, callable from Ruby:

   use Inline Ruby;

   ine(\&my_iter);

   __END__
   __Ruby__

   def ine(beckand)
     beckand.call("I'm at your")
   end

Inline::Ruby ships with this sample script:

   use Inline Ruby => 'require "tk"';

   # Create a button widget that prints 'hello', and pack it.
   TkButton->new(undef,{text=>'hello',command=>sub{print"hello\n"}})->pack;

   # Create a button widget that exits the process, and pack it.
   TkButton->new(undef,{text=>'quit',command=>'exit'})->pack;

   # Run Tk's mainloop
   Tk->mainloop;

This example pops up a windows with two buttons in it: "hello", and "quit". Clicking "hello" prints "hello\n" to your console, and "quit" does the expected.

Exceptions

Exceptions are an important part of Ruby. Any function can throw an exception at any time. If you don't catch an exception, Ruby will immediately exit the process (even if you're inside Inline::Ruby).

To avoid this rather unpleasant exit, Inline::Ruby always wraps every call to the Ruby interpreter with a rescue block (Ruby's equivalent of Perl's block eval). When an exception occurs, Inline::Ruby creates a wrapper exception object and generates a Perl exception.

   use Inline Ruby;

   print divby0(10);

   __END__
   __Ruby__

   def divby0(n)
     n/0
   end

This throws a ZeroDivisionError in Ruby. Because it wasn't caught in Ruby, it gets caught by Inline::Ruby's internals, which generate a Perl exception. But Perl didn't trap the error either... so the process exits:

   ttul:~/dev/cpan/Inline-Ruby$ perl -Mblib t.pl
   Using /home/nwatkiss/dev/cpan/Inline-Ruby/blib
   #<ZeroDivisionError: divided by 0>
   ttul:~/dev/cpan/Inline-Ruby$

The exception is actually an object, so you can call these methods on it:

  1. type

    What type of Exception was it? Returns the class of the Ruby exception ("ZeroDivisionError" in this case).

  2. message

    Returns the error message thrown by the code ("divided by 0" in this case).

  3. inspect

    Returns this: sprintf("#<%s: %s>", $@->type, $@->message)

  4. backtrace

    Prints the backtrace as far as Ruby is concerned. This does not include any Perl calls that may exists between consecutive entries.

If you "stringify" the exception ("$@"), it returns $@->inspect plus a newline.

Perl Exceptions Inside Callbacks

What happens when a callback dies? This generates a Perl exception which is caught by Inline::Ruby. It throws a new exception to Ruby: PerlException. The description is whatever is contained in "$@". The new Ruby exception might be caught inside the Ruby code, or it might percolate back to Inline::Ruby, where it will be wrapped back into $@ and thrown as a Perl Exception again.

   use Inline Ruby;

   sub callback { die "died!" }

   iter(\&callback)->func;

   __END__
   __Ruby__

   def func
     yield [1, 2, 3]
   end

This example prints the following:

   ttul:~/dev/cpan/Inline-Ruby$ perl -Mblib t.pl
   Using /home/nwatkiss/dev/cpan/Inline-Ruby/blib
   #<PerlException:        (in cleanup) died! at t.pl line 3.>

So the Perl exception was wrapped in a Ruby exception (PerlException), and then re-wrapped into an Inline::Ruby::Exception object, which was printed out when Perl exited.

This exception could have been caught in two places:

  1. Catching Perl Exceptions in Ruby

    Here's an example of catching a Perl exception from Ruby:

       use Inline Ruby;
    
       sub callback { die "died!" }
    
       iter(\&callback)->func;
    
       __END__
       __Ruby__
    
       def func
         begin
           yield [1, 2, 3]
    
         rescue PerlException => e
           print "Got an exception: " + e + "\n"
         end
       end

    Resulting in this output:

       ttul:~/dev/cpan/Inline-Ruby$ perl -Mblib t.pl
       Using /home/nwatkiss/dev/cpan/Inline-Ruby/blib
       Got an exception:       (in cleanup) died! at t.pl line 3.
  2. Catching exceptions in Perl

    Here's a familiar example of catching exceptions in Perl:

       use Inline Ruby;
    
       sub callback { die "died!" }
    
       eval {
           iter(\&callback)->func;
       };
       print "Got an exception: $@" if $@;
    
       __END__
       __Ruby__
    
       def func
         yield [1, 2, 3]
       end

    Which prints:

       ttul:~/dev/cpan/Inline-Ruby$ perl -Mblib t.pl
       Using /home/nwatkiss/dev/cpan/Inline-Ruby/blib
       Got an exception: #<PerlException:      (in cleanup) died! at t.pl line 3.>

Supported Data Types

Inline::Ruby seamlessly converts between most types of Perl and Ruby data types.

Supported Perl Data Types

The following data types may be passed from Perl into Ruby. Any unrecognized type is replaced with undef during translation.

  1. Integer

    Converted to Ruby "Fixnum" object.

  2. Floating Point

    Convert to Ruby "Float" object.

  3. String

    Converted to Ruby "String" object.

  4. Array Reference

    Converted to Ruby "Array" object (elements recursively converted).

  5. Hash Reference

    Converted to Ruby "Hash" object (elements recursively converted).

  6. Code Reference

    Converted to Ruby "Proc" object.

  7. Undef (and all others)

    Converted to Ruby NilClass object (known as nil).

Supported Ruby Data Types

The following Ruby types map be either returned from a Ruby method or function to Perl, or may be passed as arguments to a Perl callback. Unrecognized types are replaced with nil and translated to undef.

  1. Object

    Ruby objects are wrapped in instances of the Inline::Ruby::Object class. This allows Perl to call methods on the object as usual.

  2. Fixnum

    Converted to a Perl integer scalar.

  3. Float

    Converted to a Perl floating point scalar.

  4. String

    Converted to a Perl string.

  5. Array

    Converted to a Perl array reference (elements recursively converted).

  6. Hash

    Converted to a Perl hash reference (elements recursively converted).

  7. True

    Converted to a scalar containing 1.

  8. False, Nil, and anything else

    Converted to undef.

Low-Level Inline::Ruby

Unlike most other Inline languages, you can use Inline::Ruby independently of Inline:

   use Inline::Ruby qw(rb_eval);
   rb_eval('print "hello from Ruby!\n"');

By default, Inline::Ruby doesn't export anything. You can request any or all of the following functions:

rb_eval()

Takes one string argument, a Ruby expression, and returns the result of evaluating it. For example:

   $sum = rb_eval("3 + 4");
rb_call_function()

Takes the following arguments:

  1. $func

    The name of the Ruby function to call.

  2. @_

    Optional arguments to the Ruby function.

For example:

   rb_eval <<END;
   def func(a, b, c)
     p [a, b, c]
   end
   END
   rb_call_function("func", 1, "2", [3, 4])
rb_call_class_method()

Takes the following arguments:

  1. $class

    The class containing the class method.

  2. $method

    The name of the method to call.

  3. @_

    Optional arguments to the class method.

For example:

   print Dumper rb_call_class_method("Class", "methods");
rb_new_object()

Takes the following arguments:

  1. $class

    A class into which to bless the Perl object.

  2. $ruby_class

    The ruby class to create an instance of.

  3. @_

    Optional arguments to the object's constructor.

For example:

   rb_eval <<END;
   class Cls
     def initialize(a, b)
       print "Creating new Cls: #{a} #{b}\n"
     end
   end
   END
   my $o = rb_new_object("main::Cls", "Cls", 1, 2);
rb_call_instance_method()

Takes the following arguments:

  1. $instance

    An instance of Inline::Ruby::Object or a derived class.

  2. $method

    The name of the method to run on the object.

  3. @_

    Optional arguments to the method.

For example:

   my $o = rb_new_object("Inline::Ruby::Object", "Object")
   my $ans = rb_call_instance_method($o, "methods");
rb_iter()

Sets up a Ruby method for calling in iterator context.

Takes the following arguments:

  1. $obj

    An object upon which the method will be called. This object is stored inside the returned object, so that when you call a method on it, it is retrieved at that point.

    If you pass 'undef' as the $obj, the calling methods on the returned object will invoke the global Ruby function of the same name with the iterator block.

  2. $iterator

    A reference to a Perl subroutine which will be passed as an iterator to the Ruby method.

For example:

   my $obj   = rb_new_obj("Something");
   my $ready = rb_iter($obj, sub { ... });

   # call Something#some_method with an iterator
   $ready->some_method;

   # call Something#some_method without an iterator
   $obj->some_method;
rb_bind_class()

Currently undocumented.

rb_bind_func()

Currently undocumented.

METHODS FOR INTERNAL USE

build

config_var

dl_load_flags

info

load

register

validate

SUPPORTED PLATFORMS

Inline::Ruby has so far been tested on Linux only.

Perl versions tested: 5.005_03, 5.6.0, and 5.6.1. It will probably work with 5.7.x as well.

Ruby versions tested: 1.6.[3-6].

The next release will focus on increasing the number of supported platforms. I suspect that any platform where Perl and Ruby both compile will be easy to support.

SEE ALSO

For information about using Inline, see Inline.

For information about other Inline languages, see Inline-Support.

Inline::Ruby's mailing list is inline@perl.org

To subscribe, send email to inline-subscribe@perl.org

BUGS AND DEFICIENCIES

None so far.

There are bound to be some bugs lurking about. Feel free to email bug reports to inline@perl.org.

They're mite evan bee spelyng mystaikz.

AUTHOR

Maintainer: Shlomi Fish, http://www.shlomifish.org .

Neil Watkiss <NEILW@cpan.org>

COPYRIGHT

Copyright (c) 2002, Neil Watkiss.

All Rights Reserved. This module is free software. It may be used, redistributed and/or modified under the same terms as Perl itself.

See http://www.perl.com/perl/misc/Artistic.html.