The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.

OVERVIEW

The OpenID identity verification process most commonly uses the following steps, as visible to the user of this library:

  1. The user enters their OpenID into a field on the consumer's site, and hits a login button.

  2. The consumer site discovers the user's OpenID server using the YADIS protocol.

  3. The consumer site sends the browser a redirect to the identity server. This is the authentication request as described in the OpenID specification.

  4. The identity server's site sends the browser a redirect back to the consumer site. This redirect contains the server's response to the authentication request.

The most important part of the flow to note is the consumer's site must handle two separate HTTP requests in order to perform the full identity check.

LIBRARY DESIGN

This consumer library is designed with that flow in mind. The goal is to make it as easy as possible to perform the above steps securely.

At a high level, there are two important parts in the consumer library. The first important part is this module, which contains the interface to actually use this library. The second is the Net::OpenID::JanRain::Stores module, which describes the interface to use if you need to create a custom method for storing the state this library needs to maintain between requests.

In general, the second part is less important for users of the library to know about, as several implementations are provided which cover a wide variety of situations in which consumers may use the library.

This module contains a class, Net::OpenID::JanRain::Consumer, with methods corresponding to the actions necessary in each of steps 2, 3, and 4 described in the overview. Use of this library should be as easy as creating a Consumer instance and calling the methods appropriate for the action the site wants to take.

STORES AND DUMB MODE

OpenID is a protocol that works best when the consumer site is able to store some state. This is the normal mode of operation for the protocol, and is sometimes referred to as smart mode. There is also a fallback mode, known as dumb mode, which is available when the consumer site is not able to store state. This mode should be avoided when possible, as it leaves the implementation more vulnerable to replay attacks.

The mode the library works in for normal operation is determined by the store that it is given. The store is an abstraction that handles the data that the consumer needs to manage between http requests in order to operate efficiently and securely.

Several store implementation are provided, and the interface is fully documented so that custom stores can be used as well. See Net::OpenID::JanRain::Stores for more information on the interface for stores. The implementations that are provided allow the consumer site to store the necessary data in several different ways, including several SQL databases and normal files on disk.

There is an additional concrete store provided that puts the system in dumb mode. This is not recommended, as it removes the library's ability to stop replay attacks reliably. It still uses time-based checking to make replay attacks only possible within a small window, but they remain possible within that window. This store should only be used if the consumer site has no way to retain data between requests at all.

IMMEDIATE MODE

In the flow described above, the user may need to confirm to the identity server that it's ok to authorize his or her identity. The server may draw pages asking for information from the user before it redirects the browser back to the consumer's site. This is generally transparent to the consumer site, so it is typically ignored as an implementation detail.

There can be times, however, where the consumer site wants to get a response immediately. When this is the case, the consumer can put the library in immediate mode. In immediate mode, there is an extra response possible from the server, which is essentially the server reporting that it doesn't have enough information to answer the question yet. In addition to saying that, the identity server provides a URL to which the user can be sent to provide the needed information and let the server finish handling the original request.

USING THIS LIBRARY

Integrating this library into an application is usually a relatively straightforward process. The process should basically follow this plan:

Add an OpenID login field somewhere on your site. When an OpenID is entered in that field and the form is submitted, it should make a request to the your site which includes that OpenID URL.

First, the application should instantiate the Net::OpenID::JanRain::Consumer class using the store of choice. You may also pass a CGI::Session object to the constructor, which will store user transaction data.

Next, the application should call the 'begin' method on the Consumer instance. This method takes the OpenID URL. The "begin" method returns an "Net::OpenID::JanRain::Consumer::AuthRequest" object.

Next, the application should call the "redirectURL" method on the "Net::OpenID::JanRain::Consumer::AuthRequest" object. The parameter return_to is the URL that the OpenID server will send the user back to after attempting to verify his or her identity. The trust_root parameter is the URL (or URL pattern) that identifies your web site to the user when he or she is authorizing it. Send a redirect to the resulting URL to the user's browser.

That's the first half of the authentication process. The second half of the process is done after the user's ID server sends the user's browser a redirect back to your site to complete their login.

When that happens, the user will contact your site at the URL given as the return_to URL to the "redirectURL" call made above. The request will have several query parameters added to the URL by the identity server as the information necessary to finish the request.

Get an Consumer instance, and call its "complete" method, passing in all the received query arguments.

If that call is successful, the user is authenticated.

Methods of Net::OpenID::JanRain::Consumer

new

 $consumer = Net::OpenID::JanRain::Consumer->new($session, $store);

arguments

session

Must be an instance of CGI::Session. Used to store user-specific transaction data, including a list of openid services found in the user's Yadis file, allowing fallback if the primary service is down. Currently required, but may be made optional.

store

Must be an instance of Net::OpenID::JanRain::Stores, and is used to store association and nonce data.

begin

Argument

user_url

The url entered by a user, as on a web form. This url will be canonicalized, prepending http:// if it is not present.

Returns

Returns an instance of either "Net::OpenID::JanRain::Consumer::FailureResponse" (upon failure) or "Net::OpenID::JanRain::Consumer::AuthRequest" if the initial steps of the protocol succeeded.

complete

Argument

query

Pass this method the query on the return_to url as a hash ref. Common ways to get this are CGI::Vars and URI::QueryParam::query_form_hash

Returns

An instance of one of the following objects. They all support the 'status' method.

"Net::OpenID::JanRain::Consumer::SuccessResponse"
"Net::OpenID::JanRain::Consumer::FailureResponse"
"Net::OpenID::JanRain::Consumer::CancelResponse"
"Net::OpenID::JanRain::Consumer::SetupNeededResponse"

Net::OpenID::JanRain::Consumer::AuthRequest

An instance of this class is returned by the begin method of the Net::OpenID::JanRain::Consumer object when fetching the identity URL succeeded.

Methods

status

returns 'in_progress'

addExtensionArg

 $auth_req->addExtensionArg($namespace, $key, $value);

Add an extension argument to the openid request.

Arguments

namespace

A namespace string, for example 'sreg'.

key

The name of the argument.

value

The contents of the argument.

redirectURL

 $url = $auth_req->redirectURL($trust_root, $return_to, $immediate);

This method returns a URL on the user's OpenID server to redirect the user agent to.

Arguments

trust_root

Provide the trust root for your site. The return_to URL must descend from this trust root.

return_to

This is the URL that the server will redirect the user back to after authenticating.

immediate

This is an optional flag to use immediate mode, which indicates to the server that if the authentication is not possible without user interaction, the user agent should be redirected back immediately instead of displaying a page to do the required login or approval. Use this flag if you are performing this request behind the scenes, as in a hidden IFRAME.

Net::OpenID::JanRain::Consumer::SuccessResponse

This object is returned by the "complete" method of Net::OpenID::JanRain::Consumer when the authentication was successful.

Methods

extensionResponse

Pass this method an extension prefix, and it will return a hash ref with the parameters recieved for that extension. For example, if the server sent the following response:

 openid.mode=id_res
 openid.identity=http://bobdobbs.com/
 openid.signed=[whatever]
 openid.sig=[whatever]
 openid.assoc_handle=[whatever]
 openid.return_to=[whatever]
 openid.sreg.fullname=Bob Dobbs
 openid.sreg.language=AQ

Then once we had the success response we could do:

 $response->extensionResponse('sreg');
 --> {'fullname' => "Bob Dobbs", 'language' => 'AQ'}

identity_url

Returns the identity URL verified.

return_to

Returns the signed openid.return_to argument.

status

Returns 'success'.

Net::OpenID::JanRain::Consumer::FailureResponse

An instance of this class may be returned by the "begin" or "complete" methods of the Net::OpenID::JanRain::Consumer. It indicates protocol failure.

Methods

status

returns 'failure'

identity_url

returns the identity url in question.

message

returns a message describing the failure.

Net::OpenID::JanRain::Consumer::CancelResponse

This object is returned by the "complete" method of Net::OpenID::JanRain::Consumer when a cancel response was recieved from the server, indicating that the user did not complete the authentication process.

Methods

status

returns 'cancel'

identity_url

returns the identity url of the request, if available.

Net::OpenID::JanRain::Consumer::SetupNeededResponse

An instance of this class is returned by the "complete" method of Net::OpenID::JanRain::Consumer when an immediate mode request was not successful. You must instead use non-immediate mode. A URL to send the user to is provided.

Methods

status

returns 'setup_needed'

setup_url

returns the setup url, where you may redirect the user to complete authentication.

identity_url

returns the identity url in question.