HTML::Bare - Minimal HTML parser implemented via a C state engine
0.02
use HTML::Bare; my $ob = new HTML::Bare( text => '<html><name>Bob</name></html>' ); # Parse the html into a hash tree my $root = $ob->parse(); # Print the content of the name node print $root->{html}->{name}->{value}; --- # Load html from a file ( assume same contents as first example ) my $ob2 = new HTML::Bare( file => 'test.html' ); my $root2 = $ob2->parse(); $root2->{html}->{name}->{value} = 'Tim'; # Save the changes back to the file $ob2->save(); --- # Load html and verify against XBS ( HTML Bare Schema ) my $html_text = '<html><item name=bob/></html>'' my $schema_text = '<html><item* name=[a-z]+></item*></html>' my $ob = new HTML::Bare( text => $html_text, schema => { text => $schema_text } ); $ob->parse(); # this will error out if schema is invalid
This module is a 'Bare' HTML parser. It is implemented in C. The parser itself is a simple state engine that is less than 500 lines of C. The parser builds a C struct tree from input text. That C struct tree is converted to a Perl hash by a Perl function that makes basic calls back to the C to go through the nodes sequentially.
The parser itself will only cease parsing if it encounters tags that are not closed properly. All other inputs will parse, even invalid inputs. To allowing checking for validity, a schema checker is included in the module as well.
The schema format is custom and is meant to be as simple as possible. It is based loosely around the way multiplicity is handled in Perl regular expressions.
To demonstrate what sort of HTML is supported, consider the following examples. Each of the PERL statements evaluates to true.
Node containing just text
HTML: <html>blah</html> PERL: $root->{html}->{value} eq "blah";
Subset nodes
HTML: <html><name>Bob</name></html> PERL: $root->{html}->{name}->{value} eq "Bob";
Attributes unquoted
HTML: <html><a href=index.htm>Link</a></html> PERL: $root->{html}->{a}->{href}->{value} eq "index.htm";
Attributes quoted
HTML: <html><a href="index.htm">Link</a></html> PERL: $root->{html}->{a}->{href}->{value} eq "index.htm";
CDATA nodes
HTML: <html><raw><![CDATA[some raw $~<!bad html<>]]></raw></html> PERL: $root->{html}->{raw}->{value} eq "some raw \$~<!bad html<>";
Multiple nodes; form array
HTML: <html><item>1</item><item>2</item></html> PERL: $root->{html}->{item}->[0]->{value} eq "1";
Forcing array creation
HTML: <html><multi_item/><item>1</item></html> PERL: $root->{html}->{item}->[0]->{value} eq "1";
One comment supported per node
HTML: <html><!--test--></html> PERL: $root->{html}->{comment} eq 'test';
Schema checking is done by providing the module with an XBS (HTML::Bare Schema) to check the HTML against. If the HTML checks as valid against the schema, parsing will continue as normal. If the HTML is invalid, the parse function will die, providing information about the failure.
The following information is provided in the error message:
The type of error
Where the error occured ( line and char )
A short snippet of the HTML at the point of failure
Required nodes
HTML: <html></html> XBS: <html/>
Optional nodes - allow one
HTML: <html></html> XBS: <html item?/> or XBS: <html><item?/></html>
Optional nodes - allow 0 or more
HTML: <html><item/></html> XBS: <html item*/>
Required nodes - allow 1 or more
HTML: <html><item/><item/></html> XBS: <html item+/>
Nodes - specified minimum and maximum number
HTML: <html><item/><item/></html> XBS: <html item{1,2}/> or XBS: <html><item{1,2}/></html> or XBS: <html><item{1,2}></item{1,2}></html>
Multiple acceptable node formats
HTML: <html><item type=box volume=20/><item type=line length=10/></html> XBS: <html><item type=box volume/><item type=line length/></html>
Regular expressions checking for values
HTML: <html name=Bob dir=up num=10/> XBS: <html name=[A-Za-z]+ dir=up|down num=[0-9]+/>
Require multi_ tags
HTML: <html><multi_item/></html> XBS: <html item@/>
The hash structure returned from HTML parsing is created in a specific format. Besides as described above, the structure contains some additional nodes in order to preserve information that will allow that structure to be correctly converted back to HTML.
Nodes may contain the following 3 additional subnodes:
_i
The character offset within the original parsed HTML of where the node begins. This is used to provide line information for errors when HTML fails a schema check.
_pos
This is a number indicating the ordering of nodes. It is used to allow items in a perl hash to be sorted when writing back to html. Note that items are not sorted after parsing in order to save time if all you are doing is reading and you do not care about the order.
In future versions of this module an option will be added to allow you to sort your nodes so that you can read them in order. ( note that multiple nodes of the same name are stored in order )
_att
This is a boolean value that exists and is 1 iff the node is an attribute.
CDATA parsed correctly, but stripped if unneeded
Currently the contents of a node that are CDATA are read and put into the value hash, but the hash structure does not have a value indicating the node contains CDATA.
When converting back to HTML, the contents of the value hash are parsed to check for html incompatible data using a regular expression. If 'CDATA like' stuff is encountered, the node is output as CDATA.
Node position stored, but hash remains unsorted
The ordering of nodes is noted using the '_pos' value, but the hash itself is not ordered after parsing. Currently items will be out of order when looking at them in the hash.
Note that when converted back to HTML, the nodes are then sorted and output in the correct order to HTML. Note that nodes of the same name with the same parent will be grouped together; the position of the first item to appear will determine the output position of the group.
Comments are parsed but only one is stored per node.
For each node, there can be a comment within it, and that comment will be saved and output back when dumping to HTML.
Comments override output of immediate value
If a node contains only a comment node and a text value, only the comment node will be displayed. This is in line with treating a comment node as a node and only displaying immediate values when a node contains no subnodes.
PI sections are parsed, but discarded
Unknown <! sections are parsed, but discarded
<!
Attributes may use no quotes, single quotes, quotes, or backtics
Quoted attributes cannot contain escaped quotes
No escape character is recognized within quotes. As a result, regular quotes cannot be stored to HTML, or the written HTML will not be correct, due to all attributes always being written using quotes.
Attributes are always written back to HTML with quotes
Nodes cannot contain subnodes as well as an immediate value
Actually nodes can in fact contain a value as well, but that value will be discarded if you write back to HTML. That value is equal to the first continuous string of text besides a subnode.
<node>text<subnode/>text2</node> ( the value of node is text ) <node><subnode/>text</node> ( the value of node is text ) <node> <subnode/>text </node> ( the value of node is "\n " )
Entities are not parsed
No entity parsing is done. This is intentional. Future versions of the module may include a feature to automatically parse entities, but by default any such feature will be disabled in order to keep from slowing down the parser.
Also, this is done so that round trip ( read and then write back out ) behavior is consistent.
Nodes named value
Previously iterations of this module had problems with nodes named 'value', due to the fact that node contents are stored under the 'value' key already. The current version should parse such files without any problem, although it may be confusing to see a parsed tree with 'value' pointing to another hash containing 'value' as well.
In a future version of the module it will be possible to alter the name that values are stored under.
Note that node values are stored under the key 'content' when the "simple" parsing mode is used, so as to be consistent with HTML::Simple.
$ob = HTML::Bare->new( text => "[some html]" )
Create a new HTML object, with the given text as the html source.
$object = HTML::Bare->new( file => "[filename]" )
Create a new HTML object, with the given filename/path as the html source
$object = HTML::Bare->new( text => "[some html]", file => "[filename]" )
Create a new HTML object, with the given text as the html input, and the given filename/path as the potential output ( used by save() )
$object = HTML::Bare->new( file => "data.html", scheme => { file => "scheme.xbs" } )
Create a new HTML object and check to ensure it is valid html by way of the XBS scheme.
$tree = $object->parse()
Parse the html of the object and return a tree reference
$tree = $object->simple()
Alternate to the parse function which generates a tree similar to that generated by HTML::Simple. Note that the sets of nodes are turned into arrays always, regardless of whether they have a 'name' attribute, unlike HTML::Simple.
Note that currently the generated tree cannot be used with any of the functions in this module that operate upon trees. The function is provided purely as a quick and dirty way to read simple HTML files.
$tree = htmlin( $htmlext, keeproot => 1 )
The htmlin function is a shortcut to creating an HTML::Bare object and parsing it using the simple function. It behaves similarly to the HTML::Simple function by the same name. The keeproot option is optional and if left out the root node will be discarded, same as the function in HTML::Simple.
$text = $object->html( [root] )
Take the hash tree in [root] and turn it into cleanly indented ( 2 spaces ) HTML text.
$text = $object->html( [root], [root node name] )
Take the hash tree in [root] and turn it into nicely colorized and styled html. [root node name] is optional.
$object->save()
The the current tree in the object, cleanly indent it, and save it to the file parameter specified when creating the object.
$value = xval $node, $default
Returns the value of $node or $default if the node does not exist. If default is not passed to the function, then '' is returned as a default value when the node does not exist.
( $name, $age ) = xget( $personnode, qw/name age/ )
Shortcut function to grab a number of values from a node all at the same time. Note that this function assumes that all of the subnodes exist; it will fail if they do not.
$text = HTML::Bare::clean( text => "[some html]" )
Shortcut to creating an html object and immediately turning it into clean html text.
$text = HTML::Bare::clean( file => "[filename]" )
Similar to previous.
HTML::Bare::clean( file => "[filename]", save => 1 )
Clean up the html in the file, saving the results back to the file
HTML::Bare::clean( text => "[some html]", save => "[filename]" )
Clean up the html provided, and save it into the specified file.
HTML::Bare::clean( file => "[filename1]", save => "[filename2]" )
Clean up the html in filename1 and save the results to filename2.
$html = HTML::Bare::tohtml( text => "[some html]", root => 'html' )
Shortcut to creating an html object and immediately turning it into html. Root is optional, and specifies the name of the root node for the html ( which defaults to 'html' )
$object->add_node( [node], [nodeset name], name => value, name2 => value2, ... )
Example: $object->add_node( $root->{html}, 'item', name => 'Bob' ); Result: <html> <item> <name>Bob</name> </item> </html>
$object->add_node_after( [node], [subnode within node to add after], [nodeset name], ... )
$object->del_node( [node], [nodeset name], name => value )
Example: Starting HTML: <html> <a> <b>1</b> </a> <a> <b>2</b> </a> </html> Code: $html->del_node( $root->{html}, 'a', b=>'1' ); Ending HTML: <html> <a> <b>2</b> </a> </html>
$object->find_node( [node], [nodeset name], name => value )
Example: Starting HTML: <html> <ob> <key>1</key> <val>a</val> </ob> <ob> <key>2</key> <val>b</val> </ob> </html> Code: $object->find_node( $root->{html}, 'ob', key => '1' )->{val}->{value} = 'test'; Ending HTML: <html> <ob> <key>1</key> <val>test</val> </ob> <ob> <key>2</key> <val>b</val> </ob> </html>
$object->find_by_perl( [nodeset], "[perl code]" )
find_by_perl evaluates some perl code for each node in a set of nodes, and returns the nodes where the perl code evaluates as true. In order to easily reference node values, node values can be directly referred to from within the perl code by the name of the node with a dash(-) in front of the name. See the example below.
Note that this function returns an array reference as opposed to a single node unlike the find_node function.
Example: Starting HTML: <html> <ob> <key>1</key> <val>a</val> </ob> <ob> <key>2</key> <val>b</val> </ob> </html> Code: $object->find_by_perl( $root->{html}->{ob}, "-key eq '1'" )->[0]->{val}->{value} = 'test'; Ending HTML: <html> <ob> <key>1</key> <val>test</val> </ob> <ob> <key>2</key> <val>b</val> </ob> </html>
HTML::Bare::merge( [nodeset1], [nodeset2], [id node name] )
Merges the nodes from nodeset2 into nodeset1, matching the contents of each node based up the content in the id node.
Example:
Code: my $ob1 = new HTML::Bare( text => " <html> <multi_a/> <a>bob</a> <a> <id>1</id> <color>blue</color> </a> </html>" ); my $ob2 = new HTML::Bare( text => " <html> <multi_a/> <a>john</a> <a> <id>1</id> <name>bob</name> <bob>1</bob> </a> </html>" ); my $root1 = $ob1->parse(); my $root2 = $ob2->parse(); merge( $root1->{'html'}->{'a'}, $root2->{'html'}->{'a'}, 'id' ); print $ob1->html( $root1 ); Output: <html> <multi_a></multi_a> <a>bob</a> <a> <id>1</id> <color>blue</color> <name>bob</name> <bob>1</bob> </a> </html>
HTML::Bare::del_by_perl( ... )
Works exactly like find_by_perl, but deletes whatever matches.
HTML::Bare::forcearray( [noderef] )
Turns the node reference into an array reference, whether that node is just a single node, or is already an array reference.
HTML::Bare::new_node( ... )
Creates a new node...
HTML::Bare::newhash( ... )
Creates a new hash with the specified value.
HTML::Bare::simplify( [noderef] )
Take a node with children that have immediate values and creates a hashref to reference those values by the name of each child.
HTML::Bare::hash2html( [hashref] )
Take a recursive hash tree ( perhaps generated by the simplify function ) and turn it into a raw HTML string. Note that this function does not indent nicely. You will need to feed this string back into the parser and output it again if you want it to look nice. ( or you could use the 'clean' function to do it in one go )
HTML::Bare->new( text => "[html]", unsafe => 1 )
An extra speedy way to parse HTML. It is unsafe; may harm pets and children. Don't say you weren't warned. 30% speed boost compared to the normal parsing. You -must- use $ob->simple() in combination with this for it to work properly.
The speed boost is gained by skipping checks for the end of the string when in the middle of properly formatted HTML. The only time the check is done is within "values" ( which includes the space after the final closing </html> )
Also, in the unsafe mode, tags, complete with their attributes, must be on one line. Node contents of course, can still have carriage returns...
$object->read_more( text => "[html fragment]" )
Add more HTML text to be handled. Note that this function must be called before calling the parse function.
Code: my $ob = HTML::Bare->new( text => " <html> <node>a</node>" ); $ob->read_more( text => "<node>b</node>" ); $ob->read_more( text => "</html>" ); my $root = $ob->parse(); print $ob->html( $root ); Output: <html> <node>a</node> <node>b</node> </html>
Warning! Reading in additional HTML fragments only works properly at proper "division points". Currently the parser will -not- work properly if you split in the middle of a node value, or in the middle of a node name. A future version of the module will be properly updated to handle these cases.
Currently there is little to no benefit to parsing this way, rather than simple concatenating the two strings together and then reading all the HTML in at once.
find_by_att() find_by_attr() find_by_id() find_by_idr() find_by_tagname() find_by_tagnamer() nav()
check() checkone() readxbs() free_tree_c()
lineinfo() c_parse() c_parse_unsafely() c_parse_more() c_parsefile() free_tree() html2obj()
obj2htmlcol() get_root() obj2html() html2obj_simple()
Since the creation of this module there has been a fair amount of controvesy surrounding it. A number of authors of other HTML parsers have gone so far as to publicly attack this module and claim that it 'does not parse HTML', and 'it is not HTML compliant'. Some of the same people seem to be angered by the inclusion of a benchmark, claiming that it is an unfair comparison, and that if the proper options and setup are used, that other HTML parsers are better.
The module should parse any HTML document that conforms to the standardized HTML specifications, there is no need for alarm and fear that the module will corrupt your HTML documents on reading.
To be blunt about how the parser works, very little has been done to make the parser follow the specification known as 'HTML'. The parser is meant to be flexibile and somewhat resilient, and will parse HTML like garbage that would cause other parsers to error out.
As far as I am concerned, as the author of the module, the 'HTML' in 'HTML::Bare' should be thought of to mean 'eXtremely Mad Language', because the module was written from scratch without referring to the specification known as 'HTML'.
In regard to the complaints about the unfairness of the included benchmarks, please make your own intelligent decision as to what module you like by trying multiple modules and/or running the performance tests yourself. If you like some other module, use that module. If you like HTML::Bare and think it is the fastest thing on the planet, that is cool too.
If you hate HTML::Bare and want to go around on the internet trashing it and telling people to use something else, I think perhaps you may want to seek counseling.
In comparison to other available perl html parsers that create trees, HTML::Bare is extremely fast. In order to measure the performance of loading and parsing compared to the alternatives, a templated speed comparison mechanism has been created and included with HTML::Bare.
The include makebench.pl file runs when you make the module and creates perl files within the bench directory corresponding to the .tmpl contained there.
Currently there are three types of modules that can be tested against, executable parsers ( exe.tmpl ), tree parsers ( tree.tmpl ), and parsers that do not generated trees ( notree.tmpl ).
A full list of modules currently tested against is as follows:
EzHTML (exe) Tiny HTML (exe) HTML::Descent (notree) HTML::DOM HTML::Fast HTML::Grove::Builder HTML::Handler::Trees HTMLIO (exe) HTML::LibHTML (notree) HTML::LibHTML::Simple HTML::Parser (notree) HTML::Parser::EasyTree HTML::Parser::Expat (notree) HTML::SAX::Simple HTML::Simple using HTML::Parser HTML::Simple using HTML::SAX::PurePerl HTML::Simple using HTML::LibHTML::SAX::Parser HTML::Simple using HTML::Bare::SAX::Parser HTML::Smart HTML::Twig HTML::TreePP HTML::Trivial HTML::XPath::HTMLParser
To run the comparisons, run the appropriate perl file within the bench directory. ( exe.pl, tree.pl, or notree.pl )
The script measures the milliseconds of loading and parsing, and compares the time against the time of HTML::Bare. So a 7 means it takes 7 times as long as HTML::Bare.
Here is a combined table of the script run against each alternative using the included test.html:
-Module- load parse total HTML::Bare 1 1 1 HTML::TreePP 2.3063 33.1776 6.1598 HTML::Parser::EasyTree 4.9405 25.7278 7.4571 HTML::Handler::Trees 7.2303 26.5688 9.6447 HTML::Trivial 5.0636 12.4715 7.3046 HTML::Smart 6.8138 78.7939 15.8296 HTML::Simple (HTML::Parser) 2.3346 50.4772 10.7455 HTML::Simple (PurePerl) 2.361 261.4571 33.6524 HTML::Simple (LibHTML) 2.3187 163.7501 23.1816 HTML::Simple (HTML::Bare) 2.3252 59.1254 10.9163 HTML::SAX::Simple 8.7792 170.7313 28.3634 HTML::Twig 27.8266 56.4476 31.3594 HTML::Grove::Builder 7.1267 26.1672 9.4064 HTML::XPath::HTMLParser 9.7783 35.5486 13.0002 HTML::LibHTML (notree) 11.0038 4.5758 10.6881 HTML::Parser (notree) 4.4698 17.6448 5.8609 HTML::Parser::Expat(notree) 3.7681 50.0382 6.0069 HTML::Descent (notree) 6.0525 37.0265 11.0322 Tiny HTML (exe) 1.0095 EzHTML (exe) 1.1284 HTMLIO (exe) 1.0165
Here is a combined table of the script run against each alternative using the included feed2.html:
-Module- load parse total HTML::Bare 1 1 1 HTML::Bare (simple) 1 0.7238 ? HTML::Bare (unsafe simple) 1 ~0.5538 ? HTML::Fast 1.516 0.9733 1.4783 HTML::TreePP 0.6393 30.5951 2.6874 HTML::MyHTML 1.8266 14.2571 2.7113 HTML::Parser::EasyTree 1.5208 22.8283 2.9748 HTML::Trivial 2.007 25.742 3.615 HTML::Tiny 0.1665 61.4918 4.3234 HTML::XPath::HTMLParser 2.5762 33.2567 4.6742 HTML::Smart 1.702 59.4907 5.7566 HTML::Simple (HTML::Parser) 0.5838 64.7243 5.0006 HTML::DOM::Lite 4.5207 17.4617 5.4033 HTML::Simple (LibHTML) 0.5904 161.7544 11.5731 HTML::Twig 8.553 56.9034 11.8805 HTML::Grove::Builder 7.2021 30.7926 12.9334 HTML::Handler::Trees 6.8545 33.1007 13.0575 HTML::LibHTML::Simple 14.0204 11.8482 13.8707 HTML::Simple (PurePerl) 0.6176 321.3422 23.0465 HTML::Simple 2.7168 90.7203 26.7525 HTML::SAX::Simple 8.7386 94.8276 29.2166 HTML::LibHTML (notree) 11.0023 5.022 10.5214 HTML::Parser (notree) 4.3748 25.0213 5.9803 HTML::Parser::Expat(notree) 3.6555 51.6426 7.4316 HTML::Descent (notree) 5.9206 155.0289 18.7767 Tiny HTML (exe) 1.2212 EzHTML (exe) 1.3618 HTMLIO (exe) 1.0145
These results show that HTML::Bare is, at least on the test machine, running all tests within cygwin, faster at loading and parsing than everything being tested against.
The following things are shown as well: - HTML::Bare can parse HTML and create a hash tree in less time than it takes LibHTML just to parse. - HTML::Bare can parse HTML and create a tree in less time than all three binary parsers take just to parse. - HTML::Fast is theoretically faster at parsing than the default 'full' mode of HTML::Bare. Despite that, the 'simple' mode of HTML::Bare is even faster.
Note that the executable parsers are not perl modules and are timed using dummy programs that just uses the library to load and parse the example files. The executables are not included with this program. Any source modifications used to generate the shown test results can be found in the bench/src directory of the distribution
Copyright (C) 2008 David Helkowski This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. You may also can redistribute it and/or modify it under the terms of the Perl Artistic License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
To install HTML::Bare, copy and paste the appropriate command in to your terminal.
cpanm
cpanm HTML::Bare
CPAN shell
perl -MCPAN -e shell install HTML::Bare
For more information on module installation, please visit the detailed CPAN module installation guide.