 NAME
 SYNOPSIS
 EXPORTS
 DESCRIPTION
 SPANS
 SET SPECIFICATIONS
 ITERATORS
 METHODS
 OPERATOR OVERLOADS
 FUNCTIONS
 CLASS VARIABLES
 DIAGNOSTICS
 NOTES
 AUTHOR
 ACKNOWLEDGMENTS
 COPYRIGHT
NAME
Set::IntSpan  Manages sets of integers
SYNOPSIS
# BEGIN { $Set::IntSpan::integer = 1 }
use Set::IntSpan qw(grep_set map_set grep_spans map_spans);
# $Set::IntSpan::Empty_String = ''; # or '';
$set = new Set::IntSpan $set_spec;
$set = new Set::IntSpan @set_specs;
$valid = valid Set::IntSpan $run_list;
$set = copy $set $set_spec;
$run_list = run_list $set;
@elements = elements $set;
@sets = sets $set;
@spans = spans $set;
$u_set = union $set $set_spec;
$i_set = intersect $set $set_spec;
$x_set = xor $set $set_spec;
$d_set = diff $set $set_spec;
$c_set = complement $set;
$set>U($set_spec); # Union
$set>I($set_spec); # Intersect
$set>X($set_spec); # Xor
$set>D($set_spec); # Diff
$set>C; # Complement
equal $set $set_spec
equivalent $set $set_spec
superset $set $set_spec
subset $set $set_spec
$n = cardinality $set;
$n = size $set;
empty $set
finite $set
neg_inf $set
pos_inf $set
infinite $set
universal $set
member $set $n;
insert $set $n;
remove $set $n;
$min = min $set;
$max = max $set;
$holes = holes $set;
$cover = cover $set;
$inset = inset $set $n;
$smaller = trim $set $n;
$bigger = pad $set $n;
$subset = grep_set { ... } $set;
$mapset = map_set { ... } $set;
$subset = grep_spans { ... } $set;
$mapset = map_spans { ... } $set;
for ($element=$set>first; defined $element; $element=$set>next) { ... }
for ($element=$set>last ; defined $element; $element=$set>prev) { ... }
$element = $set>start($n);
$element = $set>current;
$n = $set>at($i);
$slice = $set>slice($from, $to);
$i = $set>ord($n);
$i = $set>span_ord($n);
Operator overloads
$u_set = $set + $set_spec; # union
$i_set = $set * $set_spec; # intersect
$x_set = $set ^ $set_spec; # xor
$d_set = $set  $set_spec; # diff
$c_set = ~$set; # complement
$set += $set_spec; # union
$set *= $set_spec; # intersect
$set ^= $set_spec; # xor
$set = $set_spec; # diff
$set eq $set_spec # equal
$set ne $set_spec # not equal
$set le $set_spec # subset
$set lt $set_spec # proper subset
$set ge $set_spec # superset
$set gt $set_spec # proper superset
# compare sets by cardinality
$set1 == $set2
$set1 != $set2
$set1 <= $set2
$set1 < $set2
$set1 >= $set2
$set1 > $set2
$set1 <=> $set2
# compare cardinality of set to an integer
$set1 == $n
$set1 != $n
$set1 <= $n
$set1 < $n
$set1 >= $n
$set1 > $n
$set1 <=> $n
@sorted = sort @sets; # sort sets by cardinality
if ($set) { ... } # true if $set is not empty
print "$set\n"; # stringizes to the run list
EXPORTS
@EXPORT
Nothing
@EXPORT_OK
grep_set
, map_set
, grep_spans
, map_spans
DESCRIPTION
Set::IntSpan
manages sets of integers. It is optimized for sets that have long runs of consecutive integers. These arise, for example, in .newsrc files, which maintain lists of articles:
alt.foo: 121,28,31
alt.bar: 114192,14194,1419614221
A run of consecutive integers is also called a span.
Sets are stored internally in a runlength coded form. This provides for both compact storage and efficient computation. In particular, set operations can be performed directly on the encoded representation.
Set::IntSpan
is designed to manage finite sets. However, it can also represent some simple infinite sets, such as { x  x>n }. This allows operations involving complements to be carried out consistently, without having to worry about the actual value of INT_MAX on your machine.
SPANS
A span is a run of consecutive integers. A span may be represented by an array reference, in any of 5 forms:
Finite forms
Span Set
[ $n, $n ] { n }
[ $a, $b ] { x  a<=x && x<=b}
Infinite forms
Span Set
[ undef, $b ] { x  x<=b }
[ $a , undef ] { x  x>=a }
[ undef, undef ] The set of all integers
Some methods operate directly on spans.
SET SPECIFICATIONS
Many of the methods take a set specification. There are four kinds of set specifications.
Empty
If a set specification is omitted, then the empty set is assumed. Thus,
$set = new Set::IntSpan;
creates a new, empty set. Similarly,
copy $set;
removes all elements from $set.
Object reference
If an object reference is given, it is taken to be a Set::IntSpan
object.
Run list
If a string is given, it is taken to be a run list. A run list specifies a set using a syntax similar to that in newsrc files.
A run list is a commaseparated list of runs. Each run specifies a set of consecutive integers. The set is the union of all the runs.
Runs may be written in any of 5 forms.
Finite forms
Infinite forms
Empty forms
The empty set is consistently written as '' (the null string). It is also denoted by the special form '' (a single dash).
Restrictions
The runs in a run list must be disjoint, and must be listed in increasing order.
Valid characters in a run list are 09, '(', ')', '' and ','. White space and underscore (_) are ignored. Other characters are not allowed.
Examples
Run list Set
"" { }
"1" { 1 }
"12" { 1, 2 }
"51" { 5, 4, 3, 2, 1 }
"()" the integers
"(1" the negative integers
"13, 4, 1821" { 1, 2, 3, 4, 18, 19, 20, 21 }
Array reference
If an array reference is given, then the elements of the array specify the elements of the set. The array may contain
integers
The set is the union of all the integers and spans in the array. The integers and spans need not be disjoint. The integers and spans may be in any order.
Examples
Array ref Set
[ ] { }
[ 1, 1 ] { 1 }
[ 1, 3, 2 ] { 1, 2, 3 }
[ 1, [ 5, 8 ], 5, [ 7, 9 ], 2 ] { 1, 2, 5, 6, 7, 8, 9 }
[ undef, undef ] the integers
[ undef, 1 ] the negative integers
ITERATORS
Each set has a single iterator, which is shared by all calls to first
, last
, start
, next
, prev
, and current
. At all times, the iterator is either an element of the set, or undef
.
first
, last
, and start
set the iterator; next
, and prev
move it; and current
returns it. Calls to these methods may be freely intermixed.
Using next
and prev
, a single loop can move both forwards and backwards through a set. Using start
, a loop can iterate over portions of an infinite set.
METHODS
Creation
 $set =
new
Set::IntSpan
$set_spec  $set =
new
Set::IntSpan
@set_specs 
Creates and returns a
Set::IntSpan
object.The initial contents of the set are given by $set_spec, or by the union of all the @set_specs.
 $ok =
valid
Set::IntSpan
$run_list 
Returns true if $run_list is a valid run list. Otherwise, returns false and leaves an error message in $@.
 $set =
copy
$set $set_spec 
Copies $set_spec into $set. The previous contents of $set are lost. For convenience,
copy
returns $set.  $run_list =
run_list
$set 
Returns a run list that represents $set. The run list will not contain white space. $set is not affected.
By default, the empty set is formatted as ''; a different string may be specified in
$Set::IntSpan::Empty_String
.  @elements =
elements
$set 
Returns an array containing the elements of $set. The elements will be sorted in numerical order. In scalar context, returns an array reference. $set is not affected.
 @sets =
sets
$set 
Returns the runs in $set, as a list of
Set::IntSpan
objects. The sets in the list are in order.  @spans =
spans
$set 
Returns the runs in $set, as a list of the form
([$a1, $b1], [$a2, $b2], ... [$aN, $bN])
If a run contains only a single integer, then the upper and lower bounds of the corresponding span will be equal.
If the set has no lower bound, then $a1 will be
undef
. Similarly, if the set has no upper bound, then $bN will beundef
.The runs in the list are in order.
Set operations
For these operations, a new Set::IntSpan
object is created and returned. The operands are not affected.
 $u_set =
union
$set $set_spec 
Returns the set of integers in either $set or $set_spec.
 $i_set =
intersect
$set $set_spec 
Returns the set of integers in both $set and $set_spec.
 $x_set =
xor
$set $set_spec 
Returns the set of integers in $set or $set_spec, but not both.
 $d_set =
diff
$set $set_spec 
Returns the set of integers in $set but not in $set_spec.
 $c_set =
complement
$set 
Returns the set of integers that are not in $set.
Mutators
By popular demand, Set::IntSpan
now has mutating forms of the binary set operations. These methods alter the object on which they are called.
 $set>
U
($set_spec) 
Makes $set the union of $set and $set_spec. Returns $set.
 $set>
I
($set_spec) 
Makes $set the intersection of $set and $set_spec. Returns $set.
 $set>
X
($set_spec) 
Makes $set the symmetric difference of $set and $set_spec. Returns $set.
 $set>
D
($set_spec) 
Makes $set the difference of $set and $set_spec. Returns $set.
 $set>
C

Converts $set to its own complement. Returns $set.
Comparison
equal
$set $set_spec
Returns true iff $set and $set_spec contain the same elements.
equivalent
$set $set_spec
Returns true iff $set and $set_spec contain the same number of elements. All infinite sets are equivalent.
superset
$set $set_spec
Returns true iff $set is a superset of $set_spec.
subset
$set $set_spec
Returns true iff $set is a subset of $set_spec.
Cardinality
 $n =
cardinality
$set  $n =
size
$set 
Returns the number of elements in $set. Returns 1 for infinite sets.
size
is provided as an alias forcardinality
. empty
$set
Returns true iff $set is empty.
finite
$set
Returns true iff $set is finite.
neg_inf
$set
Returns true iff $set contains {x  x<n} for some n.
pos_inf
$set
Returns true iff $set contains {x  x>n} for some n.
infinite
$set
Returns true iff $set is infinite.
universal
$set
Returns true iff $set contains all integers.
Membership
member
$set $n
Returns true iff the integer $n is a member of $set.
insert
$set $n
Inserts the integer $n into $set. Does nothing if $n is already a member of $set.
remove
$set $n
Removes the integer $n from $set. Does nothing if $n is not a member of $set.
Extrema
min
$set
Returns the smallest element of $set, or
undef
if there is none. max
$set
Returns the largest element of $set, or
undef
if there is none.
Spans
 $holes =
holes
$set 
Returns a set containing all the holes in $set, that is, all the integers that are inbetween spans of $set.
holes
is always a finite set.  $cover =
cover
$set 
Returns a set consisting of a single span from $set>
min
to $set>max
. This is the same asunion $set $set>holes
 $inset =
inset
$set $n  $smaller =
trim
$set $n  $bigger =
pad
$set $n 
inset
returns a set constructed by removing $n integers from each end of each span of $set. If $n is negative, then $n integers are added to each end of each span.In the first case, spans may vanish from the set; in the second case, holes may vanish.
trim
is provided as a synonym forinset
.pad
$set $n is the same asinset
$set $n.
Iterators
 $set>
first

Sets the iterator for $set to the smallest element of $set. If there is no smallest element, sets the iterator to
undef
. Returns the iterator.  $set>
last

Sets the iterator for $set to the largest element of $set. If there is no largest element, sets the iterator to
undef
. Returns the iterator.  $set>
start
($n) 
Sets the iterator for $set to $n. If $n is not an element of $set, sets the iterator to
undef
. Returns the iterator.  $set>
next

Sets the iterator for $set to the next element of $set. If there is no next element, sets the iterator to
undef
. Returns the iterator.next
will returnundef
only once; the next call tonext
will reset the iterator to the smallest element of $set.  $set>
prev

Sets the iterator for $set to the previous element of $set. If there is no previous element, sets the iterator to
undef
. Returns the iterator.prev
will returnundef
only once; the next call toprev
will reset the iterator to the largest element of $set.  $set>
current

Returns the iterator for $set.
Indexing
The elements of a set are kept in numerical order. These methods index into the set based on this ordering.
 $n = $set>
at
($i) 
Returns the $ith element of $set, or
undef
if there is no $ith element. Negative indices count backwards from the end of the set.Dies if
$i is nonnegative and $set is
neg_inf
$i is negative and $set is
pos_inf
 $slice = $set>
slice
($from, $to) 
Returns a
Set::IntSpan
object containing the elements of $set at indices $from..$to. Negative indices count backwards from the end of the set.Dies if
$from is nonnegative and $set is
neg_inf
$from is negative and $set is
pos_inf
 $i = $set>
ord
($n) 
The inverse of
at
.Returns the index $i of the integer $n in $set, or
undef
if $n if not an element of $set.Dies if $set is
neg_inf
.  $i = $set>
span_ord
($n) 
Returns the index $i of the span containing the integer $n, or
undef
if $n if not an element of $set.To recover the span containing $n, write
($set>spans)[$i]
OPERATOR OVERLOADS
For convenience, some operators are overloaded on Set::IntSpan
objects.
set operations
One operand must be a Set::IntSpan
object. The other operand may be a Set::IntSpan
object or a set specification.
$u_set = $set + $set_spec; # union
$i_set = $set * $set_spec; # intersect
$x_set = $set ^ $set_spec; # xor
$d_set = $set  $set_spec; # diff
$c_set = ~$set; # complement
$set += $set_spec; # union
$set *= $set_spec; # intersect
$set ^= $set_spec; # xor
$set = $set_spec; # diff
equality
The string comparison operations are overloaded to compare sets for equality and containment. One operand must be a Set::IntSpan
object. The other operand may be a Set::IntSpan
object or a set specification.
$set eq $set_spec # equal
$set ne $set_spec # not equal
$set le $set_spec # subset
$set lt $set_spec # proper subset
$set ge $set_spec # superset
$set gt $set_spec # proper superset
equivalence
The numerical comparison operations are overloaded to compare sets by cardinality. One operand must be a Set::IntSpan
object. The other operand may be a Set::IntSpan
object or an integer.
$set1 == $set2
$set1 != $set2
$set1 <= $set2
$set1 < $set2
$set1 >= $set2
$set1 > $set2
$set1 <=> $set2
$set1 cmp $set2
$set1 == $n
$set1 != $n
$set1 <= $n
$set1 < $n
$set1 >= $n
$set1 > $n
$set1 <=> $n
$set1 cmp $n
N.B. The cmp
operator is overloaded to compare sets by cardinality, not containment. This is done so that
sort @sets
will sort a list of sets by cardinality.
conversion
In boolean context, a Set::IntSpan
object evaluates to true if it is not empty.
A Set::IntSpan
object stringizes to its run list.
FUNCTIONS
 $sub_set =
grep_set
{ ... } $set 
Evaluates the BLOCK for each integer in $set (locally setting
$_
to each integer) and returns aSet::IntSpan
object containing those integers for which the BLOCK returns TRUE.Returns
undef
if $set is infinite.  $map_set =
map_set
{ ... } $set 
Evaluates the BLOCK for each integer in $set (locally setting
$_
to each integer) and returns aSet::IntSpan
object containing all the integers returned as results of all those evaluations.Evaluates the BLOCK in list context, so each element of $set may produce zero, one, or more elements in the returned set. The elements may be returned in any order, and need not be disjoint.
Returns
undef
if $set is infinite.  $sub_set =
grep_spans
{ ... } $set 
Evaluates the BLOCK for each span in $set and returns a
Set::IntSpan
object containing those spans for which the BLOCK returns TRUE.Within BLOCK,
$_
is locally set to an array ref of the form[ $lower, $upper ]
where $lower and $upper are the bounds of the span. If the span contains only one integer, then $lower and $upper will be equal. If the span is unbounded, then the corresponding element(s) of the array will be
undef
.  $map_set =
map_spans
{ ... } $set 
Evaluates the BLOCK for each span in $set, and returns a
Set::IntSpan
object consisting of the union of all the spans returned as results of all those evaluations.Within BLOCK,
$_
is locally set to an array ref of the form[ $lower, $upper ]
as described above for
grep_spans
. Each evaluation of BLOCK must return a list of spans. Each returned list may contain zero, one, or more spans. Spans may be returned in any order, and need not be disjoint. However, for each bounded span, the constraint$lower <= $upper
must hold.
CLASS VARIABLES
$Set::IntSpan::Empty_String

$Set::IntSpan::Empty_String
contains the string that is returned whenrun_list
is called on the empty set.$Empty_String
is initially ''; alternatively, it may be set to ''. Other values should be avoided, to ensure thatrun_list
always returns a valid run list.run_list
accesses$Empty_String
through a reference stored in $set>{empty_string
}. Subclasses that wish to override the value of$Empty_String
can reassign this reference. $Set::IntSpan::integer

Up until version 1.16,
Set::IntSpan
specifieduse integer
, because they were sets of...you know...integers. As of 2012, users are reporting newsgroups with article numbers above 0x7fffffff, which breakSet::IntSpan
on 32bit processors.Version 1.17 removes
use integer
by default. This extends the usable range ofSet::IntSpan
to the number of bits in the mantissa of your floating point representation. For IEEE 754 doubles, this is 53 bits, or around 9e15.I benchmarked
Set::IntSpan
on a Pentium 4, and it looks likeuse integer
provides a 2% to 4% speedup, depending on the application.If you want
use integer
back, either for performance, or because you are somehow dependent on its semantics, writeBEGIN { $Set::IntSpan::integer = 1 } use Set::IntSpan;
DIAGNOSTICS
Any method (except valid
) will die
if it is passed an invalid run list.
Set::IntSpan::_copy_run_list: Bad syntax:
$runList
(F) $run_list has bad syntax
Set::IntSpan::_copy_run_list: Bad order:
$runList
(F) $run_list has overlapping runs or runs that are out of order.
Set::IntSpan::elements: infinite set

(F) An infinite set was passed to
elements
. Set::IntSpan::at: negative infinite set

(F)
at
was called with a nonnegative index on a negative infinite set. Set::IntSpan::at: positive infinite set

(F)
at
was called with a negative index on a positive infinite set. Set::IntSpan::slice: negative infinite set

(F)
slice
was called with $from nonnegative on a negative infinite set. Set::IntSpan::slice: positive infinite set

(F)
slice
was called with $from negative on a positive infinite set. Set::IntSpan::ord: negative infinite set

(F)
ord
was called on a negative infinite set.  Out of memory!

(X)
elements
$set can generate an "Out of memory!" message on sufficiently large finite sets.
NOTES
Traps
Beware of forms like
union $set [1..5];
This passes an element of @set to union, which is probably not what you want. To force interpretation of $set and [1..5] as separate arguments, use forms like
union $set +[1..5];
or
$set>union([1..5]);
grep_set and map_set
grep_set
and map_set
make it easy to construct sets for which the internal representation used by Set::IntSpan
is not small. Consider:
$billion = new Set::IntSpan '01_000_000_000'; # OK
$odd = grep_set { $_ & 1 } $billion; # trouble
$even = map_set { $_ * 2 } $billion; # double trouble
Error handling
There are two common approaches to error handling: exceptions and return codes. There seems to be some religion on the topic, so Set::IntSpan
provides support for both.
To catch exceptions, protect method calls with an eval:
$run_list = <STDIN>;
eval { $set = new Set::IntSpan $run_list };
$@ and print "$@: try again\n";
To check return codes, use an appropriate method call to validate arguments:
$run_list = <STDIN>;
if (valid Set::IntSpan $run_list)
{ $set = new Set::IntSpan $run_list }
else
{ print "$@ try again\n" }
Similarly, use finite
to protect calls to elements
:
finite $set and @elements = elements $set;
Calling elements
on a large, finite set can generate an "Out of memory!" message, which cannot (easily) be trapped. Applications that must retain control after an error can use intersect
to protect calls to elements
:
@elements = elements { intersect $set "1_000_000  1_000_000" };
or check the size of $set first:
finite $set and cardinality $set < 2_000_000 and @elements = elements $set;
Limitations
Although Set::IntSpan
can represent some infinite sets, it does not perform infiniteprecision arithmetic. Therefore, finite elements are restricted to the range of integers on your machine.
Extensions
Users report that you can construct Set::IntSpan objects on anything that behaves like an integer. For example:
$x = new Math::BigInt ...;
$set = new Set::Intspan [ [ $x, $x+5 ] ];
I'm not documenting this as supported behavior, because I don't have the resources to test it, but I'll try not to break it. If anyone finds problems with it, let me know.
Roots
The sets implemented here are based on a Macintosh data structure called a region. See Inside Macintosh for more information.
Set::IntSpan
was originally written to manage run lists for the News::Newsrc
module.
AUTHOR
Steven McDougall <swmcd@world.std.com>
ACKNOWLEDGMENTS
Malcolm Cook <mec@stowersinstitute.org>
David Hawthorne <dsrthorne@hotmail.com>
Martin Krzywinski <martink@bcgsc.ca>
Marc Lehmann <schmorp@schmorp.de>
Andrew Olson <aolson@me.com>
Nicholas Redgrave <baron@bologrew.net>
COPYRIGHT
Copyright (c) 19962013 by Steven McDougall. This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.