Win32::Mechanize::NotepadPlusPlus::Editor::Messages - Define values for using messages, notifications, and their arguments
use Win32::Mechanize::NotepadPlusPlus ':vars'; print "$_\n" for sort { $SCIMSG{$a} <=> $SCIMSG{$b} } keys %SCIMSG; # prints all message keys in numerical order
Scintilla uses message-based communication, which is described in the ScintillaDoc.
The hashes in Win32::Mechanize::NotepadPlusPlus::Editor::Messages give named access to the underlying messages, as well as named versions of the constants used as arguments for those messages.
Many of the Scintilla Messages are already implemented in the Win32::Mechanize::NotepadPlusPlus::Editor interface, and under normal circumstances, the end-user should never need to access this %SCIMSG hash directly.
However, if you have a reason to use editor->SendMessage directly, you can use the values from this hash. Usually, this would only be done if you want a unique wrapper around the message, or want to implement a new or unimplemented message.
Used by setAccessibility.
Key | Value | Description ----------------------------+-------+--------------------------- SC_ACCESSIBILITY_DISABLED | 0 | Accessibility is disabled SC_ACCESSIBILITY_ENABLED | 1 | Accessibility is enabled
All of these values require at least Scintilla v4.2.0, found in Notepad++ v7.8 and newer.
Used by setSelAlpha and many other methods that set or retrieve transparency settings.
These actally indicate the range, from SC_ALPHA_TRANSPARENT (100% transparent) to SC_ALPHA_OPAQUE (100% opaque), with SC_ALPHA_NOALPHA (which also indicates 100% opaque, but might make for a more efficient drawing of the Scintilla window because ALPHA is disabled, rather than just being 100% opaque.)
When setting transparency, any value from SC_ALPHA_TRANSPARENT through SC_ALPHA_OPAQUE (or SC_ALPHA_NOALPHA) can be used; alpha settings do not have to be one of these three defined values.
Used by annotationSetVisible
Key | | Description --------------------+---+------------------------------------- ANNOTATION_HIDDEN | 0 | Annotations are not displayed. ANNOTATION_STANDARD | 1 | Annotations are drawn left justified with no adornment. ANNOTATION_BOXED | 2 | Annotations are indented to match the text and are surrounded by a box. ANNOTATION_INDENTED | 3 | Annotations are indented to match the text.
Used by autoCSetOrder.
Key | | Description ---------------------|---|------------- SC_ORDER_PRESORTED | 0 | List must be already sorted alphabetically SC_ORDER_PERFORMSORT | 1 | Scintilla will sort the list SC_ORDER_CUSTOM | 2 | Use a custom order
Used by autoCSetOptions.
Key | Value | Description --------------------------------|-------|------------- SC_AUTOCOMPLETE_NORMAL | 0 | Display autocompletion using default settings. SC_AUTOCOMPLETE_FIXED_SIZE | 1 | Use a fixed size list instead of one that can be resized by the user. This also avoids a header rectangle above the list.
Message requires at least Scintilla v5.2, found in Notepad++ v8.4 and newer.
Used by setAutomaticFold
Key | | Description ------------------------+---+------------- SC_AUTOMATICFOLD_NONE | 0 | Value with no automatic behaviour. SC_AUTOMATICFOLD_SHOW | 1 | Automatically show lines as needed. This avoids sending the SCN_NEEDSHOWN notification. SC_AUTOMATICFOLD_CLIC | 2 | Handle clicks in fold margin automatically. This avoids sending the SCN_MARGINCLICK notification for folding margins. SC_AUTOMATICFOLD_CHANGE | 4 | Show lines as needed when fold structure is changed. The SCN_MODIFIED notification is still sent unless it is disabled by the container.
Used by setBidirectional.
The default $SC_BIDIRECTIONAL{SC_BIDIRECTIONAL_DISABLED} (0) means that only one direction is supported.
$SC_BIDIRECTIONAL{SC_BIDIRECTIONAL_DISABLED}
Enabling $SC_BIDIRECTIONAL{SC_BIDIRECTIONAL_L2R} (1) means that left-to-right is the normal active direction, but UTF sequences can change text to right-to-left.
$SC_BIDIRECTIONAL{SC_BIDIRECTIONAL_L2R}
Enabling $SC_BIDIRECTIONAL{SC_BIDIRECTIONAL_R2L} (2) means that right-to-left is the normal active direction, but UTF sequences can change text to left-to-right.
$SC_BIDIRECTIONAL{SC_BIDIRECTIONAL_R2L}
Key | | Description --------------------------+---+------------- SC_BIDIRECTIONAL_DISABLED | 0 | Not bidirectional SC_BIDIRECTIONAL_L2R | 1 | Bidirectional, with left-to-right as normal direction SC_BIDIRECTIONAL_R2L | 2 | Bidirectional, with right-to-left as normal direction
Used by setLayoutCache
Key | | Description --------------------+---+------------- SC_CACHE_NONE | 0 | No lines are cached. SC_CACHE_CARET | 1 | The line containing the text caret. This is the default. SC_CACHE_PAGE | 2 | Visible lines plus the line containing the caret. SC_CACHE_DOCUMENT | 3 | All lines in the document.
Used by setXCaretPolicy and related.
CARET_SLOP | 0x01 | Will honor the $caretSlop setting CARET_STRICT | 0x04 | If set, CARET_SLOP is strictly enforced CARET_EVEN | 0x08 | If set, use symmetric zones; if unset, shift the zones CARET_JUMPS | 0x10 | Caret moves more "energetically"
See Scintilla documentation for SCI_SETXCARETPOLICY for details, and how they work in combination.
Used by setCaretSticky
Key | | Description ----------------------------+---+------------- SC_CARETSTICKY_OFF | 0 | All moves or text changes will change caret's horizontal position (default) SC_CARETSTICKY_ON | 1 | Only cursor movements will change the caret position SC_CARETSTICKY_WHITESPACE | 2 | Like OFF, but whitespace-only insertion will not change caret position
Used by setCaretStyle.
Key | | Description ----------------------------+-------+------------------------ CARETSTYLE_INVISIBLE | 0 | No visible caret ----------------------------+-------+------------------------ CARETSTYLE_LINE | 1 | Caret is a line (in insert mode) CARETSTYLE_BLOCK | 2 | Caret is a block (in insert mode) CARETSTYLE_INS_MASK | 0xF | Mask used for the insert mode bits, above [npp7.8] ----------------------------+-------+------------------------ CARETSTYLE_OVERSTRIKE_BAR | 0 | Caret is a bar (in overtype mode) [npp7.8] CARETSTYLE_OVERSTRIKE_BLOCK | 16 | Caret is a block (in overtype mode) [npp7.8] ----------------------------+-------+------------------------ CARETSTYLE_CURSES | 32 | Draws carets in curses-style [npp8.4] ----------------------------+-------+------------------------ CARETSTYLE_BLOCK_AFTER | 0x100 | Option for how the block is drawn [npp7.8]
For insert mode, the style of the caret can be set to a line caret (CARETSTYLE_LINE=1) or a block caret (CARETSTYLE_BLOCK=2) for insert mode (lower 4-bits, CARETSTYLE_INS_MASK) combined with a bar caret (CARETSTYLE_OVERSTRIKE_BAR=0) or a block caret (CARETSTYLE_OVERSTRIKE_BLOCK=16) for overtype mode (bit 4), or to not draw at all (CARETSTYLE_INVISIBLE=0). The default value for insert mode is the line caret (CARETSTYLE_LINE=1).
For overtype mode, the style of the caret can be set to the bar caret (CARETSTYLE_OVERSTRIKE_BAR=0) or a block caret (CARETSTYLE_OVERSTRIKE_BLOCK)=16).
When the caret end of a range is at the end and a block caret style is chosen, the block is drawn just inside the selection instead of after. This can be switched with an option (CARETSTYLE_BLOCK_AFTER=256).
The value passed can be a bitwise-or of the insert-mode choice, the overtype mode choice, and the option value.
[npp7.8]: Noted values require at least Scintilla v4.2.0, found in Notepad++ v7.8 and newer. [npp8.4]: Noted values require at least Scintilla v5.2, found in Notepad++ v8.4 and newer.
Used by styleSetCase
Key | | Description ----------------+---+------------- SC_CASE_MIXED | 0 | Displays normally (same case as stored in text) SC_CASE_UPPER | 1 | Displays as all upper case, even if there are lower case characters SC_CASE_LOWER | 2 | Displays as all lower case, even if there are upper case characters SC_CASE_CAMEL | 3 | Displays as Camel Case, regardless of underlying text case [npp7.8]
[npp7.8] Noted values require at least Scintilla v4.2.0, found in Notepad++ v7.8 and newer.
Used by autoCSetCaseInsensitiveBehaviour
Key | | Description --------------------------------------------+---+------------- SC_CASEINSENSITIVEBEHAVIOUR_RESPECTCASE | 0 | Respect case SC_CASEINSENSITIVEBEHAVIOUR_IGNORECASE | 1 | Ignore case
Used by setChangeHistory.
Key | Value | Description --------------------------------|-------|------------- SC_CHANGE_HISTORY_DISABLED | 0 | The default: change history turned off. SC_CHANGE_HISTORY_ENABLED | 1 | Track changes to the document. SC_CHANGE_HISTORY_MARKERS | 2 | Display changes in the margin using the SC_MARKNUM_HISTORY markers. SC_CHANGE_HISTORY_INDICATORS | 4 | Display changes in the text using the INDICATOR_HISTORY indicators.
Used by styleSetCharacterSet
Key | Value ------------------------+------- SC_CHARSET_ANSI | 0 SC_CHARSET_DEFAULT | 1 SC_CHARSET_SYMBOL | 2 SC_CHARSET_MAC | 77 SC_CHARSET_SHIFTJIS | 128 SC_CHARSET_HANGUL | 129 SC_CHARSET_JOHAB | 130 SC_CHARSET_GB2312 | 134 SC_CHARSET_CHINESEBIG5 | 136 SC_CHARSET_GREEK | 161 SC_CHARSET_TURKISH | 162 SC_CHARSET_VIETNAMESE | 163 SC_CHARSET_HEBREW | 177 SC_CHARSET_ARABIC | 178 SC_CHARSET_BALTIC | 186 SC_CHARSET_RUSSIAN | 204 SC_CHARSET_THAI | 222 SC_CHARSET_EASTEUROPE | 238 SC_CHARSET_OEM | 255 SC_CHARSET_OEM866 | 866 [npp7.8] SC_CHARSET_8859_15 | 1000 SC_CHARSET_CYRILLIC | 1251
$SC_CHARSET{SC_CHARSET_ANSI} and $SC_CHARSET{SC_CHARSET_DEFAULT} specify European Windows code page 1252 unless the code page is set.
$SC_CHARSET{SC_CHARSET_ANSI}
$SC_CHARSET{SC_CHARSET_DEFAULT}
Used by setCodePage
Key | | Description ------------------------------------+-------+------------- SC_CP_UTF8 | 65501 | Unicode UNOFFICIAL_SHIFT_JIS | 932 | Japanese Shift-JIS UNOFFICIAL_SIMPLIFIED_CHINESE_GBK | 936 | Simplified Chinese GBK UNOFFICIAL_KOREAN_UNIFIED_HANGUL | 949 | Korean Unified Hangul Code UNOFFICIAL_TRADITIONAL_CHINESE_BIG5 | 950 | Traditional Chinese Big5 UNOFFICIAL_KOREAN_JOHAB | 1361 | Korean Johab
SC_CP_UTF8 is the only SC_CODEPAGE value defined by Scintilla. The others were added unofficially to support codepages listed in the SCI_SETCODEPAGE documentation from Scintilla.
Used by setMarginCursorN and setCursor
SC_CURSORARROW and SC_CURSORREVERSEARROW will set the direction of the arrow in the margin with setMarginCursorN().
setMarginCursorN()
with setCursor(), SC_CURSORNORMAL (-1) will set the normal cursor behavior, and SC_CURSORWAIT (4) will set the cursor to a spinning "waiting for action" cursor
setCursor()
Use by createDocument
Key | | Description --------------------------------+-------+------------- SC_DOCUMENTOPTION_DEFAULT | 0 | Standard behaviour SC_DOCUMENTOPTION_STYLES_NONE | 0x1 | Stop allocation of memory for styles and treat all text as style 0. SC_DOCUMENTOPTION_TEXT_LARGE | 0x100 | Allow document to be larger than 2 GB. (Experimental as of Scintilla v4.2.0, Notepad++ v7.8)
Used by setEdgeMode
Key | | Description ----------------+---+------------- EDGE_NONE | 0 | Long lines are not marked. This is the default state. EDGE_LINE | 1 | A vertical line is drawn at the column number set by SCI_SETEDGECOLUMN. This works well for monospaced fonts. The line is drawn at a position based on the width of a space character in STYLE_DEFAULT, so it may not work very well if your styles use proportional fonts or if your style have varied font sizes or you use a mixture of bold, italic and normal text. EDGE_BACKGROUND | 2 | The background colour of characters after the column limit is changed to the colour set by SCI_SETEDGECOLOUR. This is recommended for proportional fonts. EDGE_MULTILINE | 3 | This is similar to EDGE_LINE but in contrary to showing only one single line a configurable set of vertical lines can be shown simultaneously. This edgeMode uses a completely independent dataset that can only be configured by using the SCI_MULTIEDGE* messages. [npp7.8]
Used by setElementColour.
Key | Value | Opaque? | Description ----------------------------------------|-------|-----------|------------- SC_ELEMENT_LIST | 0 | Opaque | Text colour in autocompletion lists SC_ELEMENT_LIST_BACK | 1 | Opaque | Background colour of autocompletion lists SC_ELEMENT_LIST_SELECTED | 2 | Opaque | Text colour of selected item in autocompletion lists SC_ELEMENT_LIST_SELECTED_BACK | 3 | Opaque | Background colour of selected item in autocompletion lists ----------------------------------------|-------|-----------|------------- SC_ELEMENT_SELECTION_TEXT | 10 | | Text colour of main selection SC_ELEMENT_SELECTION_BACK | 11 | | Background colour of main selection SC_ELEMENT_SELECTION_ADDITIONAL_TEXT | 12 | | Text colour of additional selections SC_ELEMENT_SELECTION_ADDITIONAL_BACK | 13 | | Background colour of additional selections SC_ELEMENT_SELECTION_SECONDARY_TEXT | 14 | | Text colour of selections when another window contains the primary selection SC_ELEMENT_SELECTION_SECONDARY_BACK | 15 | | Background colour of selections when another window contains the primary selection SC_ELEMENT_SELECTION_INACTIVE_TEXT | 16 | | Text colour of selections when another window has focus SC_ELEMENT_SELECTION_INACTIVE_BACK | 17 | | Background colour of selections when another window has focus ----------------------------------------|-------|-----------|------------- SC_ELEMENT_CARET | 40 | | Colour of caret for main selection SC_ELEMENT_CARET_ADDITIONAL | 41 | | Colour of caret for additional selections ----------------------------------------|-------|-----------|------------- SC_ELEMENT_CARET_LINE_BACK | 50 | | Colour of caret line background ----------------------------------------|-------|-----------|------------- SC_ELEMENT_WHITE_SPACE | 60 | | Colour of visible white space SC_ELEMENT_WHITE_SPACE_BACK | 61 | Opaque | Colour of visible white space background ----------------------------------------|-------|-----------|------------- SC_ELEMENT_HOT_SPOT_ACTIVE | 70 | | Text colour of active hot spot SC_ELEMENT_HOT_SPOT_ACTIVE_BACK | 71 | | Background colour of active hot spot ----------------------------------------|-------|-----------|------------- SC_ELEMENT_FOLD_LINE | 80 | | Colour of fold lines SC_ELEMENT_HIDDEN_LINE | 81 | | Colour of line drawn to show there are lines hidden at that point
If it's not marked as Opaque, it is Translucent.
Used by the line endings methods.
Key | | Description ------------+---+------------- SC_EOL_CRLF | 0 | Use Windows EOL (CRLF = "\r\n") SC_EOL_CR | 1 | Use old Mac EOL (CR = "\r") SC_EOL_LF | 2 | Use Unix/Linx EOL (LF = "\n")
Used by the eolAnnotationGetStyle and related.
Key | | Description ------------------------------+-------+------------- EOLANNOTATION_HIDDEN | 0x0 | End of Line Annotations are not displayed. EOLANNOTATION_STANDARD | 0x1 | End of Line Annotations are drawn left justified with no adornment. EOLANNOTATION_BOXED | 0x2 | End of Line Annotations are indented to match the text and are surrounded by a box. EOLANNOTATION_STADIUM | 0x100 | Surround with a ◖stadium◗ - a rectangle with rounded ends. EOLANNOTATION_FLAT_CIRCLE | 0x101 | Surround with a |shape◗ with flat left end and curved right end. EOLANNOTATION_ANGLE_CIRCLE | 0x102 | Surround with a ◄shape◗ with angled left end and curved right end. EOLANNOTATION_CIRCLE_FLAT | 0x110 | Surround with a ◖shape| with curved left end and flat right end. EOLANNOTATION_FLATS | 0x111 | Surround with a |shape| with flat ends. EOLANNOTATION_ANGLE_FLAT | 0x112 | Surround with a ◄shape| with angled left end and flat right end. EOLANNOTATION_CIRCLE_ANGLE | 0x120 | Surround with a ◖shape▶ with curved left end and angled right end. EOLANNOTATION_FLAT_ANGLE | 0x121 | Surround with a |shape▶ with flat left end and angled right end. EOLANNOTATION_ANGLES | 0x122 | Surround with a ◄shape▶ with angles on each end.
(Require at least Scintilla v5.2, found in Notepad++ v8.4 and newer.)
Used by getLineEndTypesSupported
Key | | Line ending support -------------------------+---+---------------------------- SC_LINE_END_TYPE_DEFAULT | 0 | Just normal line-endings SC_LINE_END_TYPE_UNICODE | 1 | Extra Unicode line-endings
Used by findText
The values should be bitwise-or'd together to form the findText argument.
%scimsg key | Value | Description --------------------+------------+----------------------------------------------------------------- SCFIND_NONE | 0x00000000 | (default) Case-insentitive, literal match SCFIND_MATCHCASE | 0x00000004 | Case-sensitive SCFIND_WHOLEWORD | 0x00000002 | Matches only whole words ( see editor()->setWordChars ) SCFIND_WORDSTART | 0x00100000 | Matches the start of whole words ( see editor()->setWordChars ) SCFIND_REGEXP | 0x00200000 | Matches as a Scintilla regular expression SCFIND_POSIX | 0x00400000 | (*) Matches a regular expression, with POSIX () groups SCFIND_CXX11REGEX | 0x00800000 | (*) Matches using C++11 <regex> library (*) means it should be used in conjunction with SCFIND_REGEXP
See Scintilla documentation for searchFlags
Used by foldLine and related methods.
Key | | Description ------------------------------------+---+------------- SC_FOLDACTION_CONTRACT | 0 | Contract SC_FOLDACTION_EXPAND | 1 | Expand SC_FOLDACTION_TOGGLE | 2 | Toggle between contracted and expanded SC_FOLDACTION_CONTRACT_EVERY_LEVEL | 4 | Used for SCI_FOLDALL only, can be combined with SC_FOLDACTION_CONTRACT or SC_FOLDACTION_TOGGLE to contract all levels instead of only top-level. [npp8.4]
[npp8.4]: Noted values require at least Scintilla v5.2, found in Notepad++ v8.4 and newer.
Used by foldDisplayTextSetStyle.
%scimsg key | Value | Description ----------------------------+-------+------------------------------------------------ SC_FOLDDISPLAYTEXT_HIDDEN | 0 | Do not display text tags SC_FOLDDISPLAYTEXT_STANDARD | 1 | Display text tags SC_FOLDDISPLAYTEXT_BOXED | 2 | Display text tags with a box drawn around them
Used by setFoldFlags.
Use a bitwise-or of one or more of the following flags:
Key | | Description ------------------------------------+-----+------------- SC_FOLDFLAG_NONE | 0 | Default value. SC_FOLDFLAG_LINEBEFORE_EXPANDED | 2 | Draw above if expanded SC_FOLDFLAG_LINEBEFORE_CONTRACTED | 4 | Draw above if not expanded SC_FOLDFLAG_LINEAFTER_EXPANDED | 8 | Draw below if expanded SC_FOLDFLAG_LINEAFTER_CONTRACTED | 16 | Draw below if not expanded SC_FOLDFLAG_LEVELNUMBERS | 64 | display hexadecimal fold levels (*) SC_FOLDFLAG_LINESTATE | 128 | display hexadecimal line state (+)
*: The appearance of this feature may change in the future. +: May not be used at the same time as SC_FOLDFLAG_LEVELNUMBERS
Used by setFoldLevel.
Key | | Description ------------------------+------+------------- SC_FOLDLEVELNONE | 0 | Default level that may occur before folding SC_FOLDLEVELBASE | 1024 | Default fold level setting SC_FOLDLEVELNUMBERMASK | 4095 | Fold level can be set to 0 .. SC_FOLDLEVELNUMBERMASK SC_FOLDLEVELWHITEFLAG | 4096 | Flag bit: line is blank and level is not as important SC_FOLDLEVELHEADERFLAG | 8192 | Flag bit: indicates it's a header (fold point)
You can set the level to anything between 0 .. SC_FOLDLEVELNUMBERMASK, so you are not restricted to using just these hash values.
See Scintilla documentation for SCI_SETFOLDLEVEL
Used by setFontQuality to set the font quality (antialiasing method)
Key | | Description --------------------------------+-----+------------- SC_EFF_QUALITY_DEFAULT | 0 | Default, backward compatible SC_EFF_QUALITY_NON_ANTIALIASED | 1 | Not antialiased SC_EFF_QUALITY_ANTIALIASED | 2 | Antialiased SC_EFF_QUALITY_LCD_OPTIMIZED | 3 | Optimized for LCD SC_EFF_QUALITY_MASK | 0xF | *Only 4 bits apply to antialiasing
(*: In the future, there may be more attributes set by setFontQuality() than just antialiasing, so the SC_EFF_QUALITY_MASK is used to indicate that antialiasing settings will be limited to four bits.)
setFontQuality()
Referenced by styleSetSizeFractional.
The sole key, SC_FONT_SIZE_MULTIPLIER (100), is used for scaling a fractional number of points to an integer for use in styleSetSizeFractional().
styleSetSizeFractional()
Used by setIdleStyling.
Key | | Description ----------------------------|---|------------- SC_IDLESTYLING_NONE | 0 | (default) Syntax styling for all visible text (may be slow for large files) SC_IDLESTYLING_TOVISIBLE | 1 | Syntax styling in small increments as background idle-task SC_IDLESTYLING_AFTERVISIBLE | 2 | Syntax styling for following text as idle-task SC_IDLESTYLING_ALL | 3 | Syntax styling for preceding and following text as idle-task
Used by setIMEInteraction
Key | | Description ----------------+---+------------- SC_IME_WINDOWED | 0 | Uses a floating window for IME SC_IME_INLINE | 1 | Puts the IME inline with the text
The SC_IME_INLINE may work better with features like rectangular and multiple selection.
Used by setIndentationGuides.
Key | | Description ------------------+---+------------- SC_IV_NONE | 0 | Not shown SC_IV_REAL | 1 | Shown inside real indentation white space SC_IV_LOOKFORWARD | 2 | Shown beyond the actual indentation SC_IV_LOOKBOTH | 3 | Shown beyond the actual indentation
The diffrence between the last two is subtle, and not single-line explainable; see the Scintilla documentation for SCI_SETINDENTATIONGUIDES for details on the difference.
There is only one predefined flag value defined for indicSetFlags, plus a flag bit and a mask that can be used in conjunction with setIndicatorValue.
Key | | Description ------------------------+-----------+------------- SC_INDICFLAG_NONE | 0 | The indicator foreground depends on the foreground setting SC_INDICFLAG_VALUEFORE | 1 | The indicator foreground depends on file location ------------------------+-----------+------------- SC_INDICVALUEMASK | 0x0FFFFFF | Mask for getting value without the flag bit SC_INDICVALUEBIT | 0x1000000 | Flag bit set true in setIndicatorValue()
Used by indicSetStyle
-------------------------------------------------+----+-------------------------------------- INDIC_PLAIN | 0 | A plain underline. INDIC_SQUIGGLE | 1 | A squiggly underline. INDIC_TT | 2 | A line of small T shapes. INDIC_DIAGONAL | 3 | Diagonal hatching. INDIC_STRIKE | 4 | Strike out. INDIC_HIDDEN | 5 | An indicator with no visual effect. INDIC_BOX | 6 | A rectangle around the text. INDIC_ROUNDBOX | 7 | A rectangle with rounded corners INDIC_STRAIGHTBOX | 8 | A rectangle, filled but semi-transparent INDIC_FULLBOX | 16 | A rectangle, filled but semi-transparent (larger) INDIC_DASH | 9 | A dashed underline. INDIC_DOTS | 10 | A dotted underline. INDIC_SQUIGGLELOW | 11 | Smaller squiggly underline. INDIC_DOTBOX | 12 | A dotted rectangle around the text. INDIC_GRADIENT | 20 | A vertical gradient, top to bottom. INDIC_GRADIENTCENTRE | 21 | A vertical gradient, center to outside. INDIC_SQUIGGLEPIXMAP | 13 | A squiggle drawn more efficiently but not as pretty. INDIC_COMPOSITIONTHICK | 14 | A 2-pixel underline, lower than INDIC_PLAIN INDIC_COMPOSITIONTHIN | 15 | A 1-pixel underline. INDIC_TEXTFORE | 17 | Change text foreground. INDIC_POINT | 18 | A triangle below the start of the indicator. INDIC_POINTCHARACTER | 19 | A triangle below the center of the first character. INDIC_POINT_TOP | 22 | Draw a triangle above the start of the indicator range. [npp8.4] INDIC_EXPLORERLINK | 23 | Indicator used for hyperlinks [npp7.9] -------------------------------------------------+----+-------------------------------------- INDICATOR_HISTORY_REVERTED_TO_ORIGIN_INSERTION | 36 | Text was deleted and saved but then reverted to its original state. This text has not been saved to disk. [npp8.4] INDICATOR_HISTORY_REVERTED_TO_ORIGIN_DELETION | 37 | Text was inserted and saved but then reverted to its original state. There is text on disk that is missing. [npp8.4] INDICATOR_HISTORY_SAVED_INSERTION | 38 | Text was inserted and saved. This text is the same as on disk. [npp8.4] INDICATOR_HISTORY_SAVED_DELETION | 39 | Text was deleted and saved. This range is the same as on disk. [npp8.4] INDICATOR_HISTORY_MODIFIED_INSERTION | 40 | Text was inserted but not yet saved. This text has not been saved to disk. [npp8.4] INDICATOR_HISTORY_MODIFIED_DELETION | 41 | Text was deleted but not yet saved. There is text on disk that is missing. [npp8.4] INDICATOR_HISTORY_REVERTED_TO_MODIFIED_INSERTION | 42 | Text was deleted and saved but then reverted but not to its original state. This text has not been saved to disk. [npp8.4] INDICATOR_HISTORY_REVERTED_TO_MODIFIED_DELETION | 43 | Text was inserted and saved but then reverted but not to its original state. There is text on disk that is missing. [npp8.4] -------------------------------------------------+----+-------------------------------------- INDICATOR_CONTAINER | 8 | Containers use indexes 8-31 [npp7.8] INDICATOR_IME | 32 | IME use indexes 32 - IME_MAX [npp7.8] INDICATOR_IME_MAX | 35 | Maximum IME index [npp7.8] INDICATOR_MAX | 43 | Maximum indicator index [npp7.8]
Note that the INDICATOR_* values are used as style indexes, not style values. (The Scintilla Documentation also gives older INDIC_ values for those, but claims that the INDICATOR_ name is preferred, so that is all that is implemented here.)
[npp#.#] Value added in particular version of Notepad++; not available in earlier versions. [npp7.8] Noted values require at least Scintilla v4.2.0, found in Notepad++ v7.8 and newer. [npp8.4] Noted values require at least Scintilla v5.2, found in Notepad++ v8.4 and newer.
Used by key binding methods
Available Keys:
Hash-Key Name | Keycode | Description --------------+---------+------------- SCK_ESCAPE | 7 | Esc/Escape SCK_BACK | 8 | Backspace SCK_TAB | 9 | Tab SCK_RETURN | 13 | Return/Enter SCK_DOWN | 300 | Down arrow SCK_UP | 301 | Up arrow SCK_LEFT | 302 | Left arrow SCK_RIGHT | 303 | Right arrow SCK_HOME | 304 | Home SCK_END | 305 | End SCK_PRIOR | 306 | PageUp SCK_NEXT | 307 | PageDown SCK_DELETE | 308 | Del/Delete SCK_INSERT | 309 | Ins/Insert SCK_ADD | 310 | Numeric Keypad + SCK_SUBTRACT | 311 | Numeric Keypad - SCK_DIVIDE | 312 | Numeric Keypad / SCK_WIN | 313 | Windows Key SCK_RWIN | 314 | Right Windows Key SCK_MENU | 315 | Menu Key
Key Modifiers:
Hash-Key Name | Value | Description --------------+---------+------------- SCMOD_NORM | 0 | Unmodified SCMOD_SHIFT | 1 | Shift SCMOD_CTRL | 2 | Ctrl SCMOD_ALT | 4 | Alt SCMOD_SUPER | 8 | Super can indicate the Windows key as the modifier SCMOD_META | 16 | Some systems may use Meta instead of Ctrl or Alt
For normal keys (letters, numbers, punctuation), the $km ("key+modifier") code is the codepoint for that character. For special keys (arrows, Escape, and similar), use the $SCKEY{SCK_*} entry for that key. If you want to indicate a modified key, add on the $SCKEY{SCK_*} shifted 16 bits up.
$SCKEY{SCK_*}
# Ctrl+HOME being assigned to SCI_HOME my $km_ctrl_home = $SCKEY{SCK_HOME} + ($SCKEY{SCMOD_CTRL}<<16); notepad->assignCmdKey($km_alt_q, $SCIMSG{SCI_HOME}); # Alt+Q being assigned to SCI_SELECTALL my $km_alt_q = ord('Q') + ($SCKEY{SCMOD_ALT}<<16); notepad->assignCmdKey($km_alt_q, $SCIMSG{SCI_SELECTALL});
Used by setKeyWords.
The only key is KEYWORDSET_MAX, which indicates the maximum index for the keywordSet. It is zero based, so there are $KEYWORDSET{KEYWORDSET_MAX}+1 sets of keywords allowed, with indexes from 0 to $KEYWORDSET{KEYWORDSET_MAX}.
This is generally used by lexers, to define the different groups of keywords (like "NUMBER", "INSTRUCTION WORD", "STRING", "REGEX" and similar in the Perl lexer).
Used by setSelectionLayer.
# with new SCI_SETSELECTIONLAYER Key | Value | Description --------------------------------|-------|------------- SC_LAYER_BASE | 0 | Draw the selection background opaquely on the base layer SC_LAYER_UNDER_TEXT | 1 | Draw the selection background translucently under the text. SC_LAYER_OVER_TEXT | 2 | Draw the selection background translucently over the text.
Used by getLineCharacterIndex.
Key | | Description ----------------------------|---|------------- SC_LINECHARACTERINDEX_NONE | 0 | If only bytes are indexed SC_LINECHARACTERINDEX_UTF32 | 1 | If whole 32bit (4byte) UTF32 characters are indexed SC_LINECHARACTERINDEX_UTF16 | 2 | If whole 16bit (2byte) UTF16 code units are indexed
Used by setMarginTypeN and other margin-related commands
Key | | Description ------------------------------+---+------------- margin indexes | | SC_MAX_MARGIN | 4 | The initial margins are indexed 0 .. SC_MAX_MARGIN ------------------------------+---+------------- margin types | | SC_MARGIN_SYMBOL | 0 | Use a symbol in the margin SC_MARGIN_NUMBER | 1 | Use line number in the margin SC_MARGIN_TEXT | 4 | Use left-justified text in the margin SC_MARGIN_RTEXT | 5 | Use right-justified text in the margin SC_MARGIN_BACK | 2 | Use STYLE_DEFAULT's background color on a margin-symbol SC_MARGIN_FORE | 3 | Use STYLE_DEFAULT's foreground color on a margin-symbol SC_MARGIN_COLOUR | 6 | Use spefied color on a margin-symbol [npp7.8] ------------------------------+---+------------- margin options | | SC_MARGINOPTION_NONE | 0 | No option set via setMarginOptions() SC_MARGINOPTION_SUBLINESELECT | 1 | Affects whole-line selection of wrapped text
If the SUBLINESELECT is enabled, clicking on the margin will only select the visible "line" (even if line-wrap extends the real line to more than one screen line); if disabled (default), clicking on the margin will select the entire real line (even if line-wrap extends the real line to more than one screen line)
See also Scintilla's MARGIN documentation.
Used as the $markerSymbol by markerDefine and related metbhods.
Key | Value | Notes --------------------------------|-------|------- SC_MARK_ARROW | 2 | SC_MARK_ARROWDOWN | 6 | SC_MARK_ARROWS | 24 | SC_MARK_AVAILABLE | 28 | SC_MARK_BACKGROUND | 22 | SC_MARK_BOOKMARK | 31 | SC_MARK_BOXMINUS | 14 | SC_MARK_BOXMINUSCONNECTED | 15 | SC_MARK_BOXPLUS | 12 | SC_MARK_BOXPLUSCONNECTED | 13 | SC_MARK_CHARACTER | 10000 | SC_MARK_CIRCLE | 0 | SC_MARK_CIRCLEMINUS | 20 | SC_MARK_CIRCLEMINUSCONNECTED | 21 | SC_MARK_CIRCLEPLUS | 18 | SC_MARK_CIRCLEPLUSCONNECTED | 19 | SC_MARK_DOTDOTDOT | 23 | SC_MARK_EMPTY | 5 | SC_MARK_FULLRECT | 26 | SC_MARK_LCORNER | 10 | SC_MARK_LCORNERCURVE | 16 | SC_MARK_LEFTRECT | 27 | SC_MARK_MINUS | 7 | SC_MARK_PIXMAP | 25 | SC_MARK_PLUS | 8 | SC_MARK_RGBAIMAGE | 30 | SC_MARK_ROUNDRECT | 1 | SC_MARK_SHORTARROW | 4 | SC_MARK_SMALLRECT | 3 | SC_MARK_TCORNER | 11 | SC_MARK_TCORNERCURVE | 17 | SC_MARK_UNDERLINE | 29 | SC_MARK_VERTICALBOOKMARK | 32 | [npp7.8] SC_MARK_VLINE | 9 | SC_MARK_BAR | 33 | [npp8.4]
Hopefully, the names describe the symbol. If it's not sufficient, then see the Scintilla documentation for SCI_MARKERDEFINE, which has an image of the marker symbols.
[npp7.8] Noted values require at least Scintilla v4.2.0, found in Notepad++ v7.8 and newer. [npp8.4] Noted values require at least Scintilla v5.2, found in Notepad++ v8.4 and newer.
Used by marker-related methods.
Key | | Description ----------------------------------------+------------+------------------------------------ MARKER_MAX | 31 | The highest $markerNumber available SC_MARKNUM_FOLDEROPEN | 31 | Start of uncollapsed folding region SC_MARKNUM_FOLDER | 30 | Start of collapsed folding region SC_MARKNUM_FOLDERSUB | 29 | Inside of uncollapsed folding region SC_MARKNUM_FOLDERTAIL | 28 | End of uncollapsed folding region SC_MARKNUM_FOLDEREND | 25 | Branch of collapsed folding region (such as "else" block) SC_MARKNUM_FOLDEROPENMID | 26 | Branch of uncollapsed folding region (such as "else" block) SC_MARKNUM_FOLDERMIDTAIL | 27 | Branch-of uncollapsed folding region (such as "else" block) ----------------------------------------+------------+------------------------------------ SC_MARKNUM_HISTORY_REVERTED_TO_ORIGIN | 21 | A change was made to this line and saved but then reverted to its original state. This line is different to its state on disk. [npp8.4] SC_MARKNUM_HISTORY_SAVED | 22 | This line was modified and saved. This line is the same as its state on disk. [npp8.4] SC_MARKNUM_HISTORY_MODIFIED | 23 | This line was modified but not yet saved. This line is different to its state on disk. [npp8.4] SC_MARKNUM_HISTORY_REVERTED_TO_MODIFIED | 24 | A change was made to this line and saved but then reverted but not to its original state. This line is different to its state on disk. [npp8.4] ----------------------------------------+------------+------------------------------------ SC_MASK_FOLDERS | 0xFE000000 | Useful for setMarginMaskN
[npp8.4] Noted values require at least Scintilla v5.2, found in Notepad++ v8.4 and newer.
Used by setModEventMask and the SCN_MODIFIED notification.
Key | Value | ------------------------+----------+- SC_LASTSTEPINUNDOREDO | 0x100 | SC_MULTISTEPUNDOREDO | 0x80 | SC_MULTILINEUNDOREDO | 0x1000 | SC_STARTACTION | 0x2000 | SC_MOD_NONE | 0x0 | SC_MOD_BEFOREDELETE | 0x800 | SC_MOD_BEFOREINSERT | 0x400 | SC_MOD_CHANGEANNOTATION | 0x20000 | SC_MOD_CHANGEFOLD | 0x8 | SC_MOD_CHANGEINDICATOR | 0x4000 | SC_MOD_CHANGELINESTATE | 0x8000 | SC_MOD_CHANGEMARGIN | 0x10000 | SC_MOD_CHANGEMARKER | 0x200 | SC_MOD_CHANGESTYLE | 0x4 | SC_MOD_CHANGETABSTOPS | 0x200000 | SC_MOD_CONTAINER | 0x40000 | SC_MOD_DELETETEXT | 0x2 | SC_MOD_INSERTCHECK | 0x100000 | SC_MOD_INSERTTEXT | 0x1 | SC_MOD_LEXERSTATE | 0x80000 | SC_PERFORMED_REDO | 0x40 | SC_PERFORMED_UNDO | 0x20 | SC_PERFORMED_USER | 0x10 | SC_MODEVENTMASKALL | 0x3FFFFF |
If you details on what they each mean, you should see SCN_MODIFIED in the Scintilla Docs.
Used by autoCSetMulti. Affects how autocompletion interacts with multi-selection (having more than one area selelected at once).
Key | | Autocompletion affects ... -------------------|---|------------- SC_MULTIAUTOC_ONCE | 0 | ... only the first area of a multi-selection (default) SC_MULTIAUTOC_EACH | 1 | ... each area of the multi-selection
Used by setMultiPaste.
Key | | Paste into ... -------------------|---|------------- SC_MULTIPASTE_ONCE | 0 | ... only the first area of a multi-selection (default) SC_MULTIPASTE_EACH | 1 | ... each area of the multi-selection
Used by setPhasesDraw.
Key | | Description --------------------|---|------------- SC_PHASES_ONE | 0 | (deprecated) Single drawing phase SC_PHASES_TWO | 1 | Draw background first, then text above it SC_PHASES_MULTIPLE | 2 | Draw whole area multiple times, once per feature
Used by usePopUp.
Key | | Description ----------------|---|------------- SC_POPUP_NEVER | 0 | Never show default editing menu SC_POPUP_ALL | 1 | Show default editing menu if clicking on scintilla SC_POPUP_TEXT | 2 | Show default editing menu only if clicking on text area
Used by setPrintColourMode.
Key | | Description --------------------------------|---|------------- SC_PRINT_NORMAL | 0 | Use screen colours, excluding line numbers in margins SC_PRINT_INVERTLIGHT | 1 | For dark background, invert print colour and use white background SC_PRINT_BLACKONWHITE | 2 | All text as black on white SC_PRINT_COLOURONWHITE | 3 | All text as displayed colour, on white SC_PRINT_COLOURONWHITEDEFAULTBG | 4 | Use displayed foreground colour, background depends on style SC_PRINT_SCREENCOLOURS | 5 | Use screen colours, including line numbers in margins [npp7.8]
Used by setRepresentationAppearance.
Key | Value | Description --------------------------------|-------|------------- SC_REPRESENTATION_PLAIN | 0 | Draw the representation text with no decorations. SC_REPRESENTATION_BLOB | 1 | Draw the representation text inverted in a rounded rectangle. This is the default appearance. SC_REPRESENTATION_COLOUR | 0x10 | Draw the representation in the colour set with SCI_SETREPRESENTATIONCOLOUR instead of in the colour of the style of the text being represented.
Used by setSelectionMode.
Key | | Description -----------------|---|------------- SC_SEL_STREAM | 0 | Stream selection (default) SC_SEL_RECTANGLE | 1 | Rectangular (column) selection SC_SEL_LINES | 2 | Select by lines SC_SEL_THIN | 3 | Thin rectangle (allows zero-width column-selection)
Used by getStatus.
Key | | Description ------------------------|------|------------- SC_STATUS_OK | 0 | No failures SC_STATUS_FAILURE | 1 | Generic failure SC_STATUS_BADALLOC | 2 | Memory is exhausted SC_STATUS_WARN_REGEX | 1001 | Regular expression is invalid
Used by Style definition methods.
These styles correspond to Dialog Entries in Settings > Style Configurator > Global Styles
Key | | Dialog Entry -----------------------|-----|------------- STYLE_DEFAULT | 32 | Default Style STYLE_LINENUMBER | 33 | Line number margin STYLE_BRACELIGHT | 34 | Brace highlight style STYLE_BRACEBAD | 35 | Brace bad colour STYLE_CONTROLCHAR | 36 | (*) Control Characters STYLE_INDENTGUIDE | 37 | Indent guideline style STYLE_CALLTIP | 38 | (*) Call tips STYLE_FOLDDISPLAYTEXT | 39 | (*) Call tips [npp7.8] -----------------------|-----|------------- STYLE_LASTPREDEFINED | 39 | (*) This is the last of Scintilla's predefined style indexes STYLE_MAX | 255 | (*) This is the last style number index available -----------------------|-----|------------- NPP_STYLE_MARK5 | 21 | (+) Mark Style 5 NPP_STYLE_MARK4 | 22 | (+) Mark Style 4 NPP_STYLE_MARK3 | 23 | (+) Mark Style 3 NPP_STYLE_MARK2 | 24 | (+) Mark Style 2 NPP_STYLE_MARK1 | 25 | (+) Mark Style 1 NPP_STYLE_TAGATTR | 26 | (+) Tags attribute NPP_STYLE_TAGMATCH | 27 | (+) Tags match highlighting NPP_STYLE_HILITE_INCR | 28 | (+) Incremental highlight all NPP_STYLE_HILITE_SMART | 29 | (+) Smart HighLighting NPP_STYLE_FINDMARK | 31 | (+) Find Mark Style
*: these keys do not have a corresponding entry in the Style Configurator.
+: This hash also has values not defined by Scintilla, but used by Notepad++'s Global Styles. It still doesn't cover all of Notepad++'s Global Styles available, because they do not use Scintilla's styler rules to implement those styles (many use the same styleID of 0, and one uses a styleID greater than STYLE_MAX), so you might not be able to set those using the style defintion methods.
Used by scintillaSupportsFeature.
Key | Value | Description ----------------------------------------|-------|------------- SC_SUPPORTS_LINE_DRAWS_FINAL | 0 | Whether drawing a line draws its final position. SC_SUPPORTS_PIXEL_DIVISIONS | 1 | Are logical pixels larger than physical pixels? SC_SUPPORTS_FRACTIONAL_STROKE_WIDTH | 2 | Can lines be drawn with fractional widths like 1.5 or 0.5 pixels? SC_SUPPORTS_TRANSLUCENT_STROKE | 3 | Can translucent lines, polygons, ellipses, and text be drawn? SC_SUPPORTS_PIXEL_MODIFICATION | 4 | Can individual pixels be modified? This is false for character cell platforms like curses. SC_SUPPORTS_THREAD_SAFE_MEASURE_WIDTHS | 5 | Can text measurement be safely performed concurrently on multiple threads?
Used by setTabDrawMode.
Key | | Description ---------------|---|------------- SCTD_LONGARROW | 0 | Arrow stretching until tabstop SCTD_STRIKEOUT | 1 | Horizontal line stretching until tabstop
Used by setTechnology.
Key | | Description --------------------------------|---|------------- SC_TECHNOLOGY_DEFAULT | 0 | Use standard API SC_TECHNOLOGY_DIRECTWRITE | 1 | Use DirectWrite API SC_TECHNOLOGY_DIRECTWRITERETAIN | 2 | Use DirectWrite API, retaining the frame SC_TECHNOLOGY_DIRECTWRITEDC | 3 | use DirectWrite API to draw into a GDI DC
In Windows XP (and earlier), only SC_TECHNOLOGY_DEFAULT is supported.
Used internally by Text retrieval and modification methods to indicate an invalid position was passed. Never returned to the user.
Used by setMouseDwellTime.
Key | | Description ----------------|----------|------------- SC_TIME_FOREVER | 10000000 | No dwell events are generated
Used by propertyType.
Key | | Description ----------------|---|------------- SC_TYPE_BOOLEAN | 0 | Property is true/false SC_TYPE_INTEGER | 1 | Property is integer SC_TYPE_STRING | 2 | Property is string
Used by addUndoAction.
Key | | Description ------------------|---|------------- UNDO_MAY_COALESCE | 1 | combine this action with insert/delete for single group undo UNDO_NONE | 0 | keep undo separate from insert/delete (default)
Used by setVirtualSpaceOptions
Key | | Description ----------------------------+---+-------------------------------------------------- SCVS_NONE | 0 | Disables all use of virtual space SCVS_RECTANGULARSELECTION | 1 | Enable virtual space for rectangular selections SCVS_USERACCESSIBLE | 2 | Enable virtual space for other circumstances SCVS_NOWRAPLINESTART | 4 | Prevents left-arrow movement from column 0 wrapping to previous line [npp7.8]
Used by setVisiblePolicy.
Key | | Description ---------------|---|------------- VISIBLE_SLOP | 1 | Adds a buffer zone VISIBLE_STRICT | 4 | Enforces the zone strictly; caret is centered in slop
Used by styleSetWeight.
Key | | Description --------------------|-----|------------- SC_WEIGHT_NORMAL | 400 | Normal SC_WEIGHT_BOLD | 700 | Bold SC_WEIGHT_SEMIBOLD | 600 | Between normal and bold
Used by setViewWS
Key | | Description ----------------------------+---+-------------------------------------------------- SCWS_INVISIBLE | 0 | The normal display mode with white space displayed as an empty background colour. SCWS_VISIBLEALWAYS | 1 | White space characters are drawn as dots and arrows, SCWS_VISIBLEAFTERINDENT | 2 | White space used for indentation is displayed normally but after the first visible character, it is shown as dots and arrows. SCWS_VISIBLEONLYININDENT | 3 | White space used for indentation is displayed as dots and arrows. [npp7.8]
Used by setWrapIndent.
Key | | Description ----------------------------|---|------------- SC_WRAPINDENT_FIXED | 0 | Wrapped lines are based on setWrapStartIndent SC_WRAPINDENT_SAME | 1 | Wrapped lines match the starting indentation SC_WRAPINDENT_INDENT | 2 | Wrapped sublines are aligned to first subline indent plus one more level of indentation SC_WRAPINDENT_DEEPINDENT | 3 | Wrapped sublines are aligned to first subline indent plus two more levels of indentation [npp7.8]
Used by setWrapMode.
Key | | Description -------------------|---|------------- SC_WRAP_NONE | 0 | No wrap SC_WRAP_WORD | 1 | Wrap on word or style boundaries SC_WRAP_CHAR | 2 | Wrap between any char SC_WRAP_WHITESPACE | 3 | Wrap at whitespace
Used by setWrapVisualFlags.
Key | | Description -------------------------|--------|------------- SC_WRAPVISUALFLAG_NONE | 0x0000 | No visual flags SC_WRAPVISUALFLAG_END | 0x0001 | Visual flag at end of each subline SC_WRAPVISUALFLAG_START | 0x0002 | Visual flag at start of each subline SC_WRAPVISUALFLAG_MARGIN | 0x0004 | Visual flag in the line-number margin
Used by setWrapVisualFlagsLocation.
Key | | Description -----------------------------------|--------|------------- SC_WRAPVISUALFLAGLOC_DEFAULT | 0x0000 | Near border SC_WRAPVISUALFLAGLOC_END_BY_TEXT | 0x0001 | End of subline SC_WRAPVISUALFLAGLOC_START_BY_TEXT | 0x0002 | Beginning of subline
Not yet used, but the constants are available
If you are interested, you can find all the message keys with code like the following:
use Win32::Mechanize::NotepadPlusPlus ':vars'; printf "%-39s => %d\n", $_, $SCINTILLANOTIFICATION{$_} for sort { $SCINTILLANOTIFICATION{$a} <=> $SCINTILLANOTIFICATION{$b} } keys %SCINTILLANOTIFICATION; # prints all scintilla notification keys in numerical order
When notifications are implemented, these will be split into multiple hashes and documented more fully.
Installed as part of Win32::Mechanize::NotepadPlusPlus
Peter C. Jones <petercj AT cpan DOT org>
<petercj AT cpan DOT org>
Please report any bugs or feature requests emailing <bug-Win32-Mechanize-NotepadPlusPlus AT rt.cpan.org> or thru the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Win32-Mechanize-NotepadPlusPlus, or thru the repository's interface at https://github.com/pryrt/Win32-Mechanize-NotepadPlusPlus/issues.
<bug-Win32-Mechanize-NotepadPlusPlus AT rt.cpan.org>
Copyright (C) 2019,2020 Peter C. Jones
This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License. See http://dev.perl.org/licenses/ for more information.
To install Win32::Mechanize::NotepadPlusPlus, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Win32::Mechanize::NotepadPlusPlus
CPAN shell
perl -MCPAN -e shell install Win32::Mechanize::NotepadPlusPlus
For more information on module installation, please visit the detailed CPAN module installation guide.