The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.

NAME

  xml_grep2 - grep XML files using XPath

SYNOPSYS

xml_grep2 [options] xpath_expression [FILE...]

DESCRIPTION

xml_grep2 is a grep-like utility for XML files.

It mimicks grep as much as possible with the major difference that the patterns are XPath expressions instead of regular expressions.

When the results of the grep is a list of XML nodes (ie no option that causes the output to be plain text is used) then the output is normally a single XML document: results are wrapped in a single root element (xg2:result_set). When several files are grepped, the results are grouped by file, wrapped in a single element (xg2:file) with an attribute (xg2:filename) giving the name of the file.

OPTIONS

-c, --count

Suppress normal output; instead print a count of matching lines for each input file.

--help

Display help message

-f NUM, --format NUM

Format, of the output XML

The format parameter sets the indenting of the output. This parameter is expected to be an integer value, that specifies that indentation should be used. The format parameter can have three different values if it is used:

If NUM is 0, than the document is dumped as it was originally parsed

If NUM is 1, xml_grep2 will add ignorable whitespaces, so the nodes content is easier to read. Existing text nodes will not be altered

If NUM is 2 (or higher), xml_grep2 will act as $format == 1 but it add a leading and a trailing linebreak to each text node.

xml_grep2 uses a hardcoded indentation of 2 space characters per indentation level. This value can not be altered on runtime.

-g, --generate-empty-set

Generate an XML result (consisting of only the wrapper) even if no result has been found

-H, --wrap, --with-filename

Force results for each file to be wrapped, even if only 1 file is grepped.

Results are normally wrapped by file only when 2 or more files are grepped

When the -t, --text option is used, prints the filename for each match.

-h, --nowrap, --no-filename

Suppress the wrapping of results by file, even if more than one file is grepped.

When the -t, --text option is used, suppress the prefixing of filenames on output when multiple files are searched.

--html

Parses the input as HTML instead of XML

-L, --files-without-matches

Suppress normal output; instead print the name of each input file from which no output would normally have been printed. Note that the file still needs to be parsed and loaded.

-l, --files-with-matches

Suppress normal output; instead print the name of each input file from which output would normally have been printed. Note that the file still needs to be parsed and loaded.

--label LABEL

Displays input actually coming from standard input as input com- ing from file LABEL. This is especially useful for tools like zgrep, e.g. gzip -cd foo.xml.gz | xml_grep --label=foo.xml something

-M, --man

Display long help message

-m NUM, --max-count NUM

Output only NUM matches per input file. Note that the file still needs to be parsed and loaded.

-N PREFIX=URI, --define-ns PREFIX=URI

Defines a namespace mapping, that can then be used in the XPath query.

This is the only way to query elements (or attributes) in the default namespace.

XML::LibXML::XPathContext needs to be installed for this option to be available.

Several -N, --define-ns options can be used

-n STRING, --namespace STRING

Change the default namespace prefix used for wrapping results. The default is xg2. Use an empty string -n '' to remove the namespace altogether.

If a namespace (default or otherwise) is used, it is associated to the URI http://xmltwig.org/tools/xml_grep2/

-o, --original-encoding

Output results in the original encoding of the file. Otherwise output is in UTF-8.

The exception to this is when the -v, --invert-match option is used, in which case the original encoding is used.

If the result is an XML document then the encoding will be the encoding of the first document with hits.

Note that if grepping files in various encodings the result could very well be not well-formed XML.

Without this argument all outputs are in UTF-8.

-q, --quiet, --silent

Quiet; do not write anything to standard output. Exit immediately with zero status if any match is found, even if an error was detected. Also see the -s or --no-messages option.

When also using the -v or --invert-match option, the return status will be an error if all the document root (or all the entire document) have been matched.

-R, -r, --recursive

Read all files under each directory, recursively

--include PATTERN

Recurse in directories only searching file matching PATTERN.

--exclude PATTERN

Recurse in directories skip file matching PATTERN.

-s, --no-messages

Suppress error messages about nonexistent or unreadable files.

-t, --text-only

Return the result as text (using the XPath value of nodes). Results are stripped of newlines and output 1 per line.

Results are in the original encoding for the document.

-V, --version

Print the version number of xml_grep2 to standard error. This version number should be included in all bug reports (see below).

-v, --invert-match

Return the original document without nodes matching the pattern argument Note that in this mode documents are output on their original encoding.

-x, no-xml-wrap

Suppress the output of the XML wrapper around the XML result.

Useful for exemple when returning collection of attribute nodes.

This option is activated by default when the -v option is used (use -X or to force the XML wrapping in this case)

-X, xml-wrap

Forces the use of the XML wrapper around the output, when -v is used.

xl, liberal

Use XML::Liberal to parse broken XML. XML::Liberal needs to be installed for this option to be available

All options names that use '-' can also use '_' instead, eg you can use no-xml-wrap or no_xml_wrap.

Differences with grep

There are some differences in behaviour with grep that are worth being mentioned:

files are always parsed and loaded in memory

This is inevitable due to the random-access nature of XPath

the file list is built before the grepping start

This means that warnings about permission problems are reported all at once before the results are output.

BUGS, TODO

namespace problems

When a namespace mapping is defined using the -N, define-ns option, if this prefix is found in a document, even bound to a different namespace, it will match.

When a prefix is defined using the -N, define-ns option, if the prefix is found in a file, then the one defined on the command line will not match for this file

Encoding

Avoid outputing characters outside of the basic ASCII range as numerical entities

Allow encoding conversions

XML parsing errors

Deal better with malformed XML, probably through an option to skip malformed XML files without dying

Be more compatible with grep

Do not build the list of files up front. Report bad links.

package properly, more tests, more docs...

XPath

see http://www.w3.org/TR/xpath/ for the spec

see http://zvon.org/xxl/XPathTutorial/General/examples.html for a tutorial

EXAMPLES

xml_grep2 //h1 index.xhtml

Extract h1 elements from index.xhtml. Do not forget the // or you will not get any result.

xml_grep2 '//h1|//h2' index.xhtml

Extract h1 and h2 elements from index.xhtml. The expression needs to be quoted because the | is special for the shell.

xml_grep2 -t -h -r --include '*.xml' '//RowAmount' /invoices/

Get the content (-t) of all RowAmount elements in .xml files in the invoices directory (and sub-directories)

The result will be a text stream with 1 result per line. The -h option suppresses the display of the file name at the beginning of each line.

xml_grep2 -t -r -h --include '*.xml' '//@AmountCurrencyIdentifier' /invoices/

Get the value of all AmountCurrencyIdentifier attribute in .xml files in the invoices directory (and sub-directories). Piping this to sort -u will give you all the currencies used in the invoices.

xml_grep2 -v '//p[@class="classified"]' secret.xml > pr.xml

Remove all p elements in the classified class from the file secret.xml

xml_grep2 -t -N d='http://perl.org/rss/1.0/' '//d:title' use.perl.org.rss.xml

Extract the text of the titles from the RSS feed for use.perl.org

As the title elements are in the default namespace, the only way to get them is to define a mapping between a prefix and the namespace URI, then to use it.

GET http://xmltwig.org/index.html | ./xml_grep2 --html -t '//@href' | sort -u

Get the list of links in a web page

REQUIREMENTS

Perl 5,

libxml2

XML::LibXML

XML::LibXML::XPathContext for -N, --define-ns option

Pod::Usage;

Getopt::Long;

File::Find::Rule

SEE ALSO

xml_grep, distributed with the XML::Twig Perl module offers a less powerful but often more memory efficient implementation of an XML grepper.

xsh (http://xsh.sourceforge.net) is an XML shell also based on libxml2 and XML::LibXML.

XMLStarlet (http://xmlstar.sourceforge.net/) is a set of tools to process XML written in C and also based on libxml2

LICENSE

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

AUTHOR

mirod <mirod@cpan.org>