The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.

__UNDEFINED__ SvUTF8 UTF8f UTF8fARG utf8_to_uvchr_buf sv_len_utf8 sv_len_utf8_nomg

#ifdef SVf_UTF8 __UNDEFINED__ SvUTF8(sv) (SvFLAGS(sv) & SVf_UTF8) #endif

#if { VERSION == 5.19.1 } /* 5.19.1 does not have UTF8fARG, only broken UTF8f */ #undef UTF8f #endif

#ifdef SVf_UTF8 __UNDEFINED__ UTF8f SVf __UNDEFINED__ UTF8fARG(u,l,p) newSVpvn_flags((p), (l), ((u) ? SVf_UTF8 : 0) | SVs_TEMP) #endif

#define D_PPP_MIN(a,b) (((a) <= (b)) ? (a) : (b))

__UNDEFINED__ UNICODE_REPLACEMENT 0xFFFD

#ifdef UTF8_MAXLEN __UNDEFINED__ UTF8_MAXBYTES UTF8_MAXLEN #endif

__UNDEF_NOT_PROVIDED__ UTF_START_MARK(len) \ (((len) > 7) ? 0xFF : (0xFF & (0xFE << (7-(len)))))

#if { VERSION < 5.018 } /* On non-EBCDIC was valid before this, */ /* but easier to just do one check */ # undef UTF8_MAXBYTES_CASE #endif

#if 'A' == 65 # define D_PPP_BYTE_INFO_BITS 6 /* 6 bits meaningful in continuation bytes */ __UNDEFINED__ UTF8_MAXBYTES_CASE 13 #else # define D_PPP_BYTE_INFO_BITS 5 /* 5 bits meaningful in continuation bytes */ __UNDEFINED__ UTF8_MAXBYTES_CASE 15 #endif

__UNDEF_NOT_PROVIDED__ UTF_ACCUMULATION_SHIFT D_PPP_BYTE_INFO_BITS

#ifdef NATIVE_TO_UTF __UNDEF_NOT_PROVIDED__ NATIVE_UTF8_TO_I8(c) NATIVE_TO_UTF(c) #else /* System doesn't support EBCDIC */ __UNDEF_NOT_PROVIDED__ NATIVE_UTF8_TO_I8(c) (c) #endif

#ifdef UTF_TO_NATIVE __UNDEF_NOT_PROVIDED__ I8_TO_NATIVE_UTF8(c) UTF_TO_NATIVE(c) #else /* System doesn't support EBCDIC */ __UNDEF_NOT_PROVIDED__ I8_TO_NATIVE_UTF8(c) (c) #endif

__UNDEF_NOT_PROVIDED__ UTF_START_MASK(len) \ (((len) >= 7) ? 0x00 : (0x1F >> ((len)-2))) __UNDEF_NOT_PROVIDED__ UTF_IS_CONTINUATION_MASK \ ((U8) (0xFF << UTF_ACCUMULATION_SHIFT)) __UNDEF_NOT_PROVIDED__ UTF_CONTINUATION_MARK \ (UTF_IS_CONTINUATION_MASK & 0xB0) __UNDEF_NOT_PROVIDED__ UTF_MIN_START_BYTE \ ((UTF_CONTINUATION_MARK >> UTF_ACCUMULATION_SHIFT) | UTF_START_MARK(2))

__UNDEF_NOT_PROVIDED__ UTF_MIN_ABOVE_LATIN1_BYTE \ ((0x100 >> UTF_ACCUMULATION_SHIFT) | UTF_START_MARK(2))

#if { VERSION < 5.007 } /* Was the complement of what should have been */ # undef UTF8_IS_DOWNGRADEABLE_START #endif __UNDEF_NOT_PROVIDED__ UTF8_IS_DOWNGRADEABLE_START(c) \ inRANGE(NATIVE_UTF8_TO_I8(c), \ UTF_MIN_START_BYTE, UTF_MIN_ABOVE_LATIN1_BYTE - 1) __UNDEF_NOT_PROVIDED__ UTF_CONTINUATION_MASK \ ((U8) ((1U << UTF_ACCUMULATION_SHIFT) - 1))

__UNDEF_NOT_PROVIDED__ UTF8_ACCUMULATE(base, added) \ (((base) << UTF_ACCUMULATION_SHIFT) \ | ((NATIVE_UTF8_TO_I8(added)) \ & UTF_CONTINUATION_MASK))

__UNDEF_NOT_PROVIDED__ UTF8_ALLOW_ANYUV 0 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_EMPTY 0x0001 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_CONTINUATION 0x0002 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_NON_CONTINUATION 0x0004 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_SHORT 0x0008 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_LONG 0x0010 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_OVERFLOW 0x0080 __UNDEF_NOT_PROVIDED__ UTF8_ALLOW_ANY ( UTF8_ALLOW_CONTINUATION \ |UTF8_ALLOW_NON_CONTINUATION \ |UTF8_ALLOW_SHORT \ |UTF8_ALLOW_LONG \ |UTF8_ALLOW_OVERFLOW)

#if defined UTF8SKIP

/* Don't use official versions because they use MIN, which may not be available */ #undef UTF8_SAFE_SKIP #undef UTF8_CHK_SKIP

__UNDEFINED__ UTF8_SAFE_SKIP(s, e) ( \ ((((e) - (s)) <= 0) \ ? 0 \ : D_PPP_MIN(((e) - (s)), UTF8SKIP(s))))

__UNDEFINED__ UTF8_CHK_SKIP(s) \ (s[0] == '\0' ? 1 : ((U8) D_PPP_MIN(my_strnlen((char *) (s), UTF8SKIP(s)), \ UTF8SKIP(s)))) /* UTF8_CHK_SKIP depends on my_strnlen */ __UNDEFINED__ UTF8_SKIP(s) UTF8SKIP(s) #endif

#if 'A' == 65 __UNDEFINED__ UTF8_IS_INVARIANT(c) isASCII(c) #else __UNDEFINED__ UTF8_IS_INVARIANT(c) (isASCII(c) || isCNTRL_L1(c)) #endif

__UNDEFINED__ UVCHR_IS_INVARIANT(c) UTF8_IS_INVARIANT(c)

#ifdef UVCHR_IS_INVARIANT # if 'A' != 65 || UVSIZE < 8 /* 32 bit platform, which includes UTF-EBCDIC on the releases this is * backported to */ # define D_PPP_UVCHR_SKIP_UPPER(c) 7 # else # define D_PPP_UVCHR_SKIP_UPPER(c) \ (((WIDEST_UTYPE) (c)) < \ (((WIDEST_UTYPE) 1) << (6 * D_PPP_BYTE_INFO_BITS)) ? 7 : 13) # endif

__UNDEFINED__ UVCHR_SKIP(c) \ UVCHR_IS_INVARIANT(c) ? 1 : \ (WIDEST_UTYPE) (c) < (32 * (1U << ( D_PPP_BYTE_INFO_BITS))) ? 2 : \ (WIDEST_UTYPE) (c) < (16 * (1U << (2 * D_PPP_BYTE_INFO_BITS))) ? 3 : \ (WIDEST_UTYPE) (c) < ( 8 * (1U << (3 * D_PPP_BYTE_INFO_BITS))) ? 4 : \ (WIDEST_UTYPE) (c) < ( 4 * (1U << (4 * D_PPP_BYTE_INFO_BITS))) ? 5 : \ (WIDEST_UTYPE) (c) < ( 2 * (1U << (5 * D_PPP_BYTE_INFO_BITS))) ? 6 : \ D_PPP_UVCHR_SKIP_UPPER(c) #endif

#ifdef is_ascii_string __UNDEFINED__ is_invariant_string(s,l) is_ascii_string(s,l) __UNDEFINED__ is_utf8_invariant_string(s,l) is_ascii_string(s,l)

/* Hint: is_ascii_string, is_invariant_string is_utf8_invariant_string() does the same thing and is preferred because its name is more accurate as to what it does */ #endif

#ifdef ibcmp_utf8 __UNDEFINED__ foldEQ_utf8(s1,pe1,l1,u1,s2,pe2,l2,u2) \ cBOOL(! ibcmp_utf8(s1,pe1,l1,u1,s2,pe2,l2,u2)) #endif

#if defined(is_utf8_string) && defined(UTF8SKIP) __UNDEFINED__ isUTF8_CHAR(s, e) ( \ (e) <= (s) || ! is_utf8_string(s, UTF8_SAFE_SKIP(s, e)) \ ? 0 \ : UTF8SKIP(s)) #endif

#if 'A' == 65 __UNDEFINED__ BOM_UTF8 "\xEF\xBB\xBF" __UNDEFINED__ REPLACEMENT_CHARACTER_UTF8 "\xEF\xBF\xBD" #elif '^' == 95 __UNDEFINED__ BOM_UTF8 "\xDD\x73\x66\x73" __UNDEFINED__ REPLACEMENT_CHARACTER_UTF8 "\xDD\x73\x73\x71" #elif '^' == 176 __UNDEFINED__ BOM_UTF8 "\xDD\x72\x65\x72" __UNDEFINED__ REPLACEMENT_CHARACTER_UTF8 "\xDD\x72\x72\x70" #else # error Unknown character set #endif

#if { VERSION < 5.31.4 } /* Versions prior to this accepted things that are now considered * malformations, and didn't return -1 on error with warnings enabled * */ # undef utf8_to_uvchr_buf #endif

/* This implementation brings modern, generally more restricted standards to * utf8_to_uvchr_buf. Some of these are security related, and clearly must * be done. But its arguable that the others need not, and hence should not. * The reason they're here is that a module that intends to play with the * latest perls should be able to work the same in all releases. An example is * that perl no longer accepts any UV for a code point, but limits them to * IV_MAX or below. This is for future internal use of the larger code points. * If it turns out that some of these changes are breaking code that isn't * intended to work with modern perls, the tighter restrictions could be * relaxed. khw thinks this is unlikely, but has been wrong in the past. */

/* 5.6.0 is the first release with UTF-8, and we don't implement this function * there due to its likely lack of still being in use, and the underlying * implementation is very different from later ones, without the later * safeguards, so would require extra work to deal with */ #if { VERSION >= 5.6.1 } && ! defined(utf8_to_uvchr_buf) /* Choose which underlying implementation to use. At least one must be * present or the perl is too early to handle this function */ # if defined(utf8n_to_uvchr) || defined(utf8_to_uvchr) || defined(utf8_to_uv) # if defined(utf8n_to_uvchr) /* This is the preferred implementation */ # define D_PPP_utf8_to_uvchr_buf_callee utf8n_to_uvchr # elif /* Must be at least 5.6.1 from #if above; \ If have both regular and _simple, regular has all args */ \ defined(utf8_to_uv) && defined(utf8_to_uv_simple) # define D_PPP_utf8_to_uvchr_buf_callee utf8_to_uv # elif defined(utf8_to_uvchr) /* The below won't work well on error input */ # define D_PPP_utf8_to_uvchr_buf_callee(s, curlen, retlen, flags) \ utf8_to_uvchr((U8 *)(s), (retlen)) # else # define D_PPP_utf8_to_uvchr_buf_callee(s, curlen, retlen, flags) \ utf8_to_uv((U8 *)(s), (retlen)) # endif # endif

# if { NEED utf8_to_uvchr_buf }

UV utf8_to_uvchr_buf(pTHX_ const U8 *s, const U8 *send, STRLEN *retlen) { UV ret; STRLEN curlen; bool overflows = 0; const U8 *cur_s = s; const bool do_warnings = ckWARN_d(WARN_UTF8); # if { VERSION < 5.26.0 } && ! defined(EBCDIC) STRLEN overflow_length = 0; # endif

    if (send > s) {
        curlen = send - s;
    }
    else {
        assert(0);  /* Modern perls die under this circumstance */
        curlen = 0;
        if (! do_warnings) {    /* Handle empty here if no warnings needed */
            if (retlen) *retlen = 0;
            return UNICODE_REPLACEMENT;
        }
    }

# if { VERSION < 5.26.0 } && ! defined(EBCDIC)

    /* Perl did not properly detect overflow for much of its history on
     * non-EBCDIC platforms, often returning an overlong value which may or may
     * not have been tolerated in the call.  Also, earlier versions, when they
     * did detect overflow, may have disallowed it completely.  Modern ones can
     * replace it with the REPLACEMENT CHARACTER, depending on calling
     * parameters.  Therefore detect it ourselves in  releases it was
     * problematic in. */

    if (curlen > 0 && UNLIKELY(*s >= 0xFE)) {

        /* First, on a 32-bit machine the first byte being at least \xFE
         * automatically is overflow, as it indicates something requiring more
         * than 31 bits */
        if (sizeof(ret) < 8) {
            overflows = 1;
            overflow_length = (*s == 0xFE) ? 7 : 13;
        }
        else {
            const U8 highest[] =    /* 2*63-1 */
                        "\xFF\x80\x87\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF";
            const U8 *cur_h = highest;

            for (cur_s = s; cur_s < send; cur_s++, cur_h++) {
                if (UNLIKELY(*cur_s == *cur_h)) {
                    continue;
                }

                /* If this byte is larger than the corresponding highest UTF-8
                 * byte, the sequence overflows; otherwise the byte is less
                 * than (as we handled the equality case above), and so the
                 * sequence doesn't overflow */
                overflows = *cur_s > *cur_h;
                break;

            }

            /* Here, either we set the bool and broke out of the loop, or got
             * to the end and all bytes are the same which indicates it doesn't
             * overflow.  If it did overflow, it would be this number of bytes
             * */
            overflow_length = 13;
        }
    }

    if (UNLIKELY(overflows)) {
        ret = 0;

        if (! do_warnings && retlen) {
            *retlen = overflow_length;
        }
    }
    else

# endif /* < 5.26 */

        /* Here, we are either in a release that properly detects overflow, or
         * we have checked for overflow and the next statement is executing as
         * part of the above conditional where we know we don't have overflow.
         *
         * The modern versions allow anything that evaluates to a legal UV, but
         * not overlongs nor an empty input */
        ret = D_PPP_utf8_to_uvchr_buf_callee(
              (U8 *) /* Early perls: no const */
                    s, curlen, retlen,   (UTF8_ALLOW_ANYUV
                                      & ~(UTF8_ALLOW_LONG|UTF8_ALLOW_EMPTY)));

# if { VERSION >= 5.26.0 } && { VERSION < 5.28.0 }

    /* But actually, more modern versions restrict the UV to being no more than
     * what an IV can hold, so it could still have gotten it wrong about
     * overflowing. */
    if (UNLIKELY(ret > IV_MAX)) {
        overflows = 1;
    }

# endif

    if (UNLIKELY(overflows)) {
        if (! do_warnings) {
            if (retlen) {
                *retlen = D_PPP_MIN(*retlen, UTF8SKIP(s));
                *retlen = D_PPP_MIN(*retlen, curlen);
            }
            return UNICODE_REPLACEMENT;
        }
        else {

            /* We use the error message in use from 5.8-5.26 */
            Perl_warner(aTHX_ packWARN(WARN_UTF8),
                "Malformed UTF-8 character (overflow at 0x%" UVxf
                ", byte 0x%02x, after start byte 0x%02x)",
                ret, *cur_s, *s);
            if (retlen) {
                *retlen = (STRLEN) -1;
            }
            return 0;
        }
    }

    /* Here, did not overflow, but if it failed for some other reason, and
     * warnings are off, to emulate the behavior of the real utf8_to_uvchr(),
     * try again, allowing anything.  (Note a return of 0 is ok if the input
     * was '\0') */
    if (UNLIKELY(ret == 0 && (curlen == 0 || *s != '\0'))) {

        /* If curlen is 0, we already handled the case where warnings are
         * disabled, so this 'if' will be true, and so later on, we know that
         * 's' is dereferencible */
        if (do_warnings) {
            *retlen = (STRLEN) -1;
        }
        else {
            ret = D_PPP_utf8_to_uvchr_buf_callee(
                                     (U8 *) /* Early perls: no const */
                                            s, curlen, retlen, UTF8_ALLOW_ANY);
            /* Override with the REPLACEMENT character, as that is what the
             * modern version of this function returns */
            ret = UNICODE_REPLACEMENT;

# if { VERSION < 5.16.0 }

            /* Versions earlier than this don't necessarily return the proper
             * length.  It should not extend past the end of string, nor past
             * what the first byte indicates the length is, nor past the
             * continuation characters */
            if (retlen && (IV) *retlen >= 0) {
                unsigned int i = 1;

                *retlen = D_PPP_MIN(*retlen, curlen);
                *retlen = D_PPP_MIN(*retlen, UTF8SKIP(s));
                do {
#      ifdef UTF8_IS_CONTINUATION
                    if (! UTF8_IS_CONTINUATION(s[i]))
#      else       /* Versions without the above don't support EBCDIC anyway */
                    if (s[i] < 0x80 || s[i] > 0xBF)
#      endif
                    {
                        *retlen = i;
                        break;
                    }
                } while (++i < *retlen);
            }

# endif

        }
    }

    return ret;
}

# endif #endif

#if defined(UTF8SKIP) && defined(utf8_to_uvchr_buf) #undef utf8_to_uvchr /* Always redefine this unsafe function so that it refuses to read past a NUL, making it much less likely to read off the end of the buffer. A NUL indicates the start of the next character anyway. If the input isn't NUL-terminated, the function remains unsafe, as it always has been. */

__UNDEFINED__ utf8_to_uvchr(s, lp) \ ((*(s) == '\0') \ ? utf8_to_uvchr_buf(s,((s)+1), lp) /* Handle single NUL specially */ \ : utf8_to_uvchr_buf(s, (s) + UTF8_CHK_SKIP(s), (lp)))

#endif

/* Hint: utf8_to_uvchr Use utf8_to_uvchr_buf() instead. But ONLY if you KNOW the upper bound of the input string (not resorting to using UTF8SKIP, etc., to infer it). The backported utf8_to_uvchr() will do a better job to prevent most cases of trying to read beyond the end of the buffer */

/* Replace utf8_to_uvchr with utf8_to_uvchr_buf */

#ifdef sv_len_utf8 /* Older Perl versions have broken sv_len_utf8() when passed sv does not have SVf_UTF8 flag set */ /* Also note that SvGETMAGIC() may change presence of SVf_UTF8 flag */ # if { VERSION < 5.17.5 } # undef sv_len_utf8 # if defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN) # define sv_len_utf8_nomg(sv) ({ SV *_sv2 = (sv); (SvUTF8(_sv2) ? Perl_sv_len_utf8(aTHX_ (!SvGMAGICAL(_sv2) ? _sv2 : sv_mortalcopy_flags(_sv2, SV_NOSTEAL))) : ({ STRLEN _len; SvPV_nomg(_sv2, _len); _len; })); }) # define sv_len_utf8(sv) ({ SV *_sv1 = (sv); SvGETMAGIC(_sv1); sv_len_utf8_nomg(_sv1); }) # else # define sv_len_utf8_nomg(sv) (PL_Sv = (sv), (SvUTF8(PL_Sv) ? Perl_sv_len_utf8(aTHX_ (!SvGMAGICAL(PL_Sv) ? PL_Sv : sv_mortalcopy_flags(PL_Sv, SV_NOSTEAL))) : (SvPV_nomg(PL_Sv, PL_na), PL_na))) # define sv_len_utf8(sv) (PL_Sv = (sv), SvGETMAGIC(PL_Sv), sv_len_utf8_nomg(PL_Sv)) # endif # endif # if defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN) __UNDEFINED__ sv_len_utf8_nomg(sv) ({ SV *_sv = (sv); sv_len_utf8(!SvGMAGICAL(_sv) ? _sv : sv_mortalcopy_flags(_sv, SV_NOSTEAL)); }) # else __UNDEFINED__ sv_len_utf8_nomg(sv) ((PL_Sv = (sv)), sv_len_utf8(!SvGMAGICAL(PL_Sv) ? PL_Sv : sv_mortalcopy_flags(PL_Sv, SV_NOSTEAL))) # endif #endif

#define NEED_utf8_to_uvchr_buf

#if defined(UTF8f) && defined(newSVpvf)

void UTF8f(x) SV *x PREINIT: U32 u; STRLEN len; char *ptr; INIT: ptr = SvPV(x, len); u = SvUTF8(x); PPCODE: x = sv_2mortal(newSVpvf("[%" UTF8f "]", UTF8fARG(u, len, ptr))); XPUSHs(x); XSRETURN(1);

#endif

#if { VERSION >= 5.006 } /* This is just a helper fcn, not publicized */ \ /* as being available and params not what the */ \ /* API function has; works on EBCDIC too */

SV * uvchr_to_utf8(native)

    UV native
    PREINIT:
        int len;
        U8 string[UTF8_MAXBYTES+1];
        int i;
        UV uni;

    CODE:
        len = UVCHR_SKIP(native);

        for (i = 0; i < len; i++) {
            string[i] = '\0';
        }

        if (len <= 1) {
            string[0] = native;
        }
        else {
            i = len;
            uni = NATIVE_TO_UNI(native);
            while (i-- > 1) {
                string[i] = I8_TO_NATIVE_UTF8((uni & UTF_CONTINUATION_MASK) | UTF_CONTINUATION_MARK);
                uni >>= UTF_ACCUMULATION_SHIFT;
            }
            string[0] = I8_TO_NATIVE_UTF8((uni & UTF_START_MASK(len)) | UTF_START_MARK(len));
        }

        RETVAL = newSVpvn((char *) string, len);
        SvUTF8_on(RETVAL);
    OUTPUT:
        RETVAL

#endif #if defined(UTF8_SAFE_SKIP) && defined(UTF8SKIP)

STRLEN UTF8_SAFE_SKIP(s, adjustment) char * s int adjustment PREINIT: const char *const_s; CODE: const_s = s; /* Instead of passing in an 'e' ptr, use the real end, adjusted */ RETVAL = UTF8_SAFE_SKIP(const_s, s + UTF8SKIP(s) + adjustment); OUTPUT: RETVAL

#endif

#ifdef isUTF8_CHAR

STRLEN isUTF8_CHAR(s, adjustment) unsigned char * s int adjustment PREINIT: const unsigned char *const_s; const unsigned char *const_e; CODE: const_s = s; /* Instead of passing in an 'e' ptr, use the real end, adjusted */ const_e = const_s + UTF8SKIP(const_s) + adjustment; RETVAL = isUTF8_CHAR(const_s, const_e); OUTPUT: RETVAL

#endif

#ifdef foldEQ_utf8

STRLEN foldEQ_utf8(s1, l1, u1, s2, l2, u2) char *s1 UV l1 bool u1 char *s2 UV l2 bool u2 PREINIT: const char *const_s1; const char *const_s2; CODE: const_s1 = s1; const_s2 = s2; RETVAL = foldEQ_utf8(const_s1, NULL, l1, u1, const_s2, NULL, l2, u2); OUTPUT: RETVAL

#endif

#ifdef utf8_to_uvchr_buf

AV * utf8_to_uvchr_buf(s, adjustment) unsigned char *s int adjustment PREINIT: AV *av; STRLEN len; const unsigned char *const_s; CODE: av = newAV(); const_s = s; av_push(av, newSVuv(utf8_to_uvchr_buf(const_s, s + UTF8SKIP(s) + adjustment, &len))); if (len == (STRLEN) -1) { av_push(av, newSViv(-1)); } else { av_push(av, newSVuv(len)); } RETVAL = av; OUTPUT: RETVAL

#endif

#ifdef utf8_to_uvchr

AV * utf8_to_uvchr(s) unsigned char *s PREINIT: AV *av; STRLEN len; const unsigned char *const_s; CODE: av = newAV(); const_s = s; av_push(av, newSVuv(utf8_to_uvchr(const_s, &len))); if (len == (STRLEN) -1) { av_push(av, newSViv(-1)); } else { av_push(av, newSVuv(len)); } RETVAL = av; OUTPUT: RETVAL

#endif

#ifdef sv_len_utf8

STRLEN sv_len_utf8(sv) SV *sv CODE: RETVAL = sv_len_utf8(sv); OUTPUT: RETVAL

#endif

#ifdef sv_len_utf8_nomg

STRLEN sv_len_utf8_nomg(sv) SV *sv CODE: RETVAL = sv_len_utf8_nomg(sv); OUTPUT: RETVAL

#endif

#ifdef UVCHR_IS_INVARIANT

bool UVCHR_IS_INVARIANT(c) unsigned c PREINIT: CODE: RETVAL = UVCHR_IS_INVARIANT(c); OUTPUT: RETVAL

#endif

#ifdef UVCHR_SKIP

STRLEN UVCHR_SKIP(c) UV c PREINIT: CODE: RETVAL = UVCHR_SKIP(c); OUTPUT: RETVAL

#endif

BEGIN { # skip tests on 5.6.0 and earlier, plus 5.7.0 if (ivers($]) <= ivers(5.6) || ivers($]) == ivers(5.7) ) { skip 'skip: broken utf8 support', 98; exit; } require warnings; }

is(Devel::PPPort::UTF8f(42), '[42]'); is(Devel::PPPort::UTF8f('abc'), '[abc]'); is(Devel::PPPort::UTF8f("\x{263a}"), "[\x{263a}]");

my $str = "\x{A8}"; if (ivers($]) >= ivers(5.8)) { eval q{utf8::upgrade($str)} } is(Devel::PPPort::UTF8f($str), "[\x{A8}]"); if (ivers($]) >= ivers(5.8)) { eval q{utf8::downgrade($str)} } is(Devel::PPPort::UTF8f($str), "[\x{A8}]");

is(&Devel::PPPort::UTF8_SAFE_SKIP("A", 0), 1); is(&Devel::PPPort::UTF8_SAFE_SKIP("A", -1), 0);

is(&Devel::PPPort::isUTF8_CHAR("A", -1), 0); is(&Devel::PPPort::isUTF8_CHAR("A", 0), 1); is(&Devel::PPPort::isUTF8_CHAR("\x{100}", -1), 0); is(&Devel::PPPort::isUTF8_CHAR("\x{100}", 0), 2);

is(&Devel::PPPort::UVCHR_IS_INVARIANT(ord("A")), 1); ok(! &Devel::PPPort::UVCHR_IS_INVARIANT(0xb6)); ok(! &Devel::PPPort::UVCHR_IS_INVARIANT(0x100));

is(&Devel::PPPort::UVCHR_SKIP(ord("A")), 1); is(&Devel::PPPort::UVCHR_SKIP(0xb6), 2, "This is a test"); is(&Devel::PPPort::UVCHR_SKIP(0x3FF), 2); is(&Devel::PPPort::UVCHR_SKIP(0x3FFF), 3); is(&Devel::PPPort::UVCHR_SKIP(0x3FFFF), 4); is(&Devel::PPPort::UVCHR_SKIP(0x3FFFFF), 5); is(&Devel::PPPort::UVCHR_SKIP(0x3FFFFFF), ord("A") == 65 ? 5 : 6); is(&Devel::PPPort::UVCHR_SKIP(0x4000000), ord("A") == 65 ? 6 : 7); if (ord("A") != 65) { skip("Test not valid on EBCDIC", 1) } else { is(&Devel::PPPort::UVCHR_SKIP(0xFFFFFFFF), 7); }

if (ivers($]) < ivers(5.8)) { skip("Perl version too early", 3); } else { is(&Devel::PPPort::foldEQ_utf8("A\x{100}", 3, 1, "a\x{101}", 3, 1), 1); is(&Devel::PPPort::foldEQ_utf8("A\x{100}", 3, 1, "a\x{102}", 3, 1), 0); is(&Devel::PPPort::foldEQ_utf8("A\x{100}", 3, 1, "b\x{101}", 3, 1), 0); }

my $ret = &Devel::PPPort::utf8_to_uvchr("A"); is($ret->[0], ord("A")); is($ret->[1], 1);

$ret = &Devel::PPPort::utf8_to_uvchr("\0"); is($ret->[0], 0); is($ret->[1], 1);

$ret = &Devel::PPPort::utf8_to_uvchr_buf("A", 0); is($ret->[0], ord("A")); is($ret->[1], 1);

$ret = &Devel::PPPort::utf8_to_uvchr_buf("\0", 0); is($ret->[0], 0); is($ret->[1], 1);

my @buf_tests = ( { input => "A", adjustment => -1, warning => eval "qr/empty/", no_warnings_returned_length => 0, }, { input => "\xc4\xc5", adjustment => 0, warning => eval "qr/non-continuation/", no_warnings_returned_length => 1, }, { input => "\xc4\x80", adjustment => -1, warning => eval "qr/short|1 byte, need 2/", no_warnings_returned_length => 1, }, { input => "\xc0\x81", adjustment => 0, warning => eval "qr/overlong|2 bytes, need 1/", no_warnings_returned_length => 2, }, { input => "\xe0\x80\x81", adjustment => 0, warning => eval "qr/overlong|3 bytes, need 1/", no_warnings_returned_length => 3, }, { input => "\xf0\x80\x80\x81", adjustment => 0, warning => eval "qr/overlong|4 bytes, need 1/", no_warnings_returned_length => 4, }, { # Old algorithm failed to detect this input => "\xff\x80\x90\x90\x90\xbf\xbf\xbf\xbf\xbf\xbf\xbf\xbf", adjustment => 0, warning => eval "qr/overflow/", no_warnings_returned_length => 13, }, );

if (ord("A") != 65) { # tests not valid for EBCDIC skip("Perl version too early", 2 + 4 + (scalar @buf_tests * 5)); } else { $ret = &Devel::PPPort::utf8_to_uvchr_buf("\xc4\x80", 0); is($ret->[0], 0x100); is($ret->[1], 2);

    my @warnings;
    local $SIG{__WARN__} = sub { push @warnings, @_; };

    {
        use warnings 'utf8';
        $ret = &Devel::PPPort::utf8_to_uvchr("\xe0\0\x80");
        is($ret->[0], 0);
        is($ret->[1], -1);

        no warnings 'utf8';
        $ret = &Devel::PPPort::utf8_to_uvchr("\xe0\0\x80");
        is($ret->[0], 0xFFFD);
        is($ret->[1], 1);
    }


    # An empty input is an assertion failure on debugging builds.  It is
    # deliberately the first test.
    require Config; import Config;
    use vars '%Config';

    # VMS doesn't put DEBUGGING in ccflags, and Windows doesn't have
    # $Config{config_args}.  When 5.14 or later can be assumed, use
    # Config::non_bincompat_options(), but for now we're stuck with this.
    if (   $Config{ccflags} =~ /-DDEBUGGING/
        || $^O eq 'VMS' && $Config{config_args} =~ /\bDDEBUGGING\b/)
    {
        shift @buf_tests;
        skip("Test not valid on DEBUGGING builds", 5);
    }

    my $test;
    for $test (@buf_tests) {
        my $input = $test->{'input'};
        my $adjustment = $test->{'adjustment'};
        my $display = 'utf8_to_uvchr_buf("';
        my $i;
        for ($i = 0; $i < length($input) + $adjustment; $i++) {
            $display .= sprintf "\\x%02x", ord substr($input, $i, 1);
        }

        $display .= '")';
        my $warning = $test->{'warning'};

        undef @warnings;
        use warnings 'utf8';
        $ret = &Devel::PPPort::utf8_to_uvchr_buf($input, $adjustment);
        is($ret->[0], 0,  "returned value $display; warnings enabled");
        is($ret->[1], -1, "returned length $display; warnings enabled");
        my $all_warnings = join "; ", @warnings;
        my $contains = grep { $_ =~ $warning } $all_warnings;
        is($contains, 1, $display
                    . "; Got: '$all_warnings', which should contain '$warning'");

        undef @warnings;
        no warnings 'utf8';
        $ret = &Devel::PPPort::utf8_to_uvchr_buf($input, $adjustment);
        is($ret->[0], 0xFFFD,  "returned value $display; warnings disabled");
        is($ret->[1], $test->{'no_warnings_returned_length'},
                      "returned length $display; warnings disabled");
    }
}

if (ivers($]) ge ivers(5.008)) { BEGIN { if (ivers($]) ge ivers(5.008)) { require utf8; "utf8"->import() } }

    is(Devel::PPPort::sv_len_utf8("aščť"), 4);
    is(Devel::PPPort::sv_len_utf8_nomg("aščť"), 4);

    my $str = "áíé";
    utf8::downgrade($str);
    is(Devel::PPPort::sv_len_utf8($str), 3);
    utf8::downgrade($str);
    is(Devel::PPPort::sv_len_utf8_nomg($str), 3);
    utf8::upgrade($str);
    is(Devel::PPPort::sv_len_utf8($str), 3);
    utf8::upgrade($str);
    is(Devel::PPPort::sv_len_utf8_nomg($str), 3);

    tie my $scalar, 'TieScalarCounter', "é";

    is(tied($scalar)->{fetch}, 0);
    is(tied($scalar)->{store}, 0);
    is(Devel::PPPort::sv_len_utf8($scalar), 2);
    is(tied($scalar)->{fetch}, 1);
    is(tied($scalar)->{store}, 0);
    is(Devel::PPPort::sv_len_utf8($scalar), 3);
    is(tied($scalar)->{fetch}, 2);
    is(tied($scalar)->{store}, 0);
    is(Devel::PPPort::sv_len_utf8($scalar), 4);
    is(tied($scalar)->{fetch}, 3);
    is(tied($scalar)->{store}, 0);
    is(Devel::PPPort::sv_len_utf8_nomg($scalar), 4);
    is(tied($scalar)->{fetch}, 3);
    is(tied($scalar)->{store}, 0);
    is(Devel::PPPort::sv_len_utf8_nomg($scalar), 4);
    is(tied($scalar)->{fetch}, 3);
    is(tied($scalar)->{store}, 0);
} else {
    skip 'skip: no utf8::downgrade/utf8::upgrade support', 23;
}

package TieScalarCounter;

sub TIESCALAR { my ($class, $value) = @_; return bless { fetch => 0, store => 0, value => $value }, $class; }

sub FETCH { BEGIN { if (main::ivers($]) ge main::ivers(5.008)) { require utf8; "utf8"->import() } } my ($self) = @_; $self->{fetch}++; return $self->{value} .= "é"; }

sub STORE { my ($self, $value) = @_; $self->{store}++; $self->{value} = $value; }

6 POD Errors

The following errors were encountered while parsing the POD:

Around line 1:

Unknown directive: =provides

Around line 11:

Unknown directive: =implementation

Around line 450:

Unknown directive: =xsinit

Around line 454:

Unknown directive: =xsubs

Around line 677:

Unknown directive: =tests

Around line 869:

Non-ASCII character seen before =encoding in 'is(Devel::PPPort::sv_len_utf8("aščť"),'. Assuming UTF-8