++ed by:
DDUMONT SAPER

2 PAUSE users

Dominique Dumont
and 1 contributors

NAME

Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

VERSION

version 1.255

DESCRIPTION

Configuration classes used by Config::Model

Elements

Model

Select the LCD model [default: 633; legal: 533, 631, 633, 635]Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.

Device

Select the output device to use [default: /dev/lcd]Optional. Type uniline. default: '/dev/ttyUSB0'.

Contrast

Set the initial contrast [default: 560; legal: 0 - 1000]Optional. Type integer. upstream_default: '560'.

Brightness

Set the initial brightness [default: 1000; legal: 0 - 1000]Optional. Type integer. upstream_default: '1000'.

OffBrightness

Set the initial off-brightness [default: 0; legal: 0 - 1000] This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer. upstream_default: '0'.

Reboot

Reinitialize the LCD's BIOS on driver start. [default: no; legal: yes, no]Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

USB

Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled. [default: no; legal: yes, no]Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

OldFirmware

Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command (31). For those devices it may be necessary to enable this flag. [default: no; legal: yes, no]Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

Size

Override the LCD size known for the selected model. Usually setting this value should not be necessary.Optional. Type uniline. default: '20x4'.

Speed

Override the default communication speed known for the selected model. [default: depending on model; legal: 19200, 115200]Optional. Type enum. choice: '19200', '115200'. upstream_default: 'dependingonmodel'.

SEE ALSO