NetAddr::MAC - Handles hardware MAC Addresses (EUI-48 and EUI-64)
version 0.94
use NetAddr::MAC; my $mac = NetAddr::MAC->new( '00:11:22:aa:bb:cc' ); my $mac = NetAddr::MAC->new( mac => '0011.22AA.BBCC' ); print "MAC provided at object creation was: ", $mac->original; print "EUI48\n" if $mac->is_eui48; print "EUI64\n" if $mac->is_eui64; print "Unicast\n" if $mac->is_unicast; print "Multicast\n" if $mac->is_multicast; print "Broadcast\n" if $mac->is_broadcast; print "Locally Administerd\n" if $mac->is_local; print "Universally Administered\n" if $mac->is_universal; print 'Basic Format: ',$mac->as_basic,"\n"; print 'Bpr Format: ', $mac->as_bpr,"\n"; print 'Cisco Format: ',$mac->as_cisco,"\n"; print 'IEEE Format: ', $mac->as_ieee,"\n"; print 'IPv6 Address: ',$mac->as_ipv6_suffix,"\n"; print 'Microsoft Format: ',$mac->as_microsoft,"\n"; print 'Single Dash Format: ',$mac->as_singledash,"\n"; print 'Sun Format: ', $mac->as_sun,"\n"; print 'Token Ring Format: ', $mac->as_tokenring,"\n"; use NetAddr::MAC qw( :all ); my $mac = q/00.11.22.33.44.55/; print "EUI48\n" if mac_is_eui48($mac); print "EUI64\n" if mac_is_eui64($mac); print "Unicast\n" if mac_is_unicast($mac); print "Multicast\n" if mac_is_multicast($mac); print "Broadcast\n" if mac_is_broadcast($mac); print "Locally Administerd\n" if mac_is_local($mac); print "Universally Administered\n" if mac_is_universal($mac); print 'Basic Format: ',mac_as_basic($mac),"\n"; print 'Bpr Format: ', mac_as_bpr($mac),"\n"; print 'Cisco Format: ',mac_as_cisco($mac),"\n"; print 'IEEE Format: ', mac_as_ieee($mac),"\n"; print 'IPv6 Address: ',mac_as_ipv6_suffix($mac),"\n"; print 'Microsoft Format: ',mac_as_microsoft($mac),"\n"; print 'Single Dash Format: ', mac_as_singledash($mac),"\n"; print 'Sun Format: ', mac_as_sun($mac),"\n"; print 'Token Ring Format: ',mac_as_tokenring($mac),"\n";
This module provides an interface to deal with Media Access Control (or MAC) addresses. These are the addresses that uniquely identify a device on various layer 2 networks. Although the most common case is hardware addresses on Ethernet network cards, there are a variety of devices that use this system of addressing.
This module supports both EUI-48 and EUI-64 addresses and implements an OO and a functional interface.
Some networks that use EUI-48 (or MAC-48) addresses include:
Ethernet 802.11 wireless networks Bluetooth IEEE 802.5 token ring FDDI ATM
Some networks that use EUI-64 addresses include:
Firewire IPv6 (sort of) ZigBee / 802.15.4 wireless personal-area networks
Creates and returns a new NetAddr::MAC object. The MAC value is required.
As above, but %options may include any or none of the following
die_on_error
If set to true, errors will result in a die (croak) rather than populating $errstr
Take care when using the mac_is_* functions! they will return false in both the case of an error and according to the properties of the MAC address. You will therefore need to enable die_on_error or check $errstr when false is returned.
priority
This is the bridge priority as an integer, which can also be set by providing a mac address in the following format, where 60 is the priority.
60#0011.22aa.bbcc
This is a cisco thing, so typically the above is the format you would see. But we are flexible enough to handle formats like...
60#00:11:22:aa:bb:cc 60#001122aabbcc 60#00-11-22-aa-bb-cc etc.
If priority is provided as an option and as part of the mac address string, an error will occur only if they differ.
Priority defaults to 0 if not provided.
Simplified creation method
As above but with %options
returns the original mac string as used when creating the MAC object
returns the mac address's Organizationally Unique Identifier (OUI) with dashes in Hexadecimal / Canonical format:
AC-DE-48
returns the error (if one occured).
This is intended for use with the object. Its not exported at all.
Note: this method is used once the NetAddr::MAC object is successfully created. For now the to_eui48 method is the only method that will return an error once the object is created.
When creating objects, you will need to catch errors with either the or function, or the eval way.
returns true if mac address is determined to be of the EUI48 standard
returns true if mac address is determined to be of the EUI64 standard
returns true if mac address is determined to be a multicast address
returns true if mac address is determined to be a broadcast address
returns true if mac address is determined to be a Virtual Router Redundancy (VRRP) address
ie. 00-00-5E-00-01-XX
always returns false for eui64.
I'm not quite sure what to do with 01-00-5E-00-00-12, suggestions welcomed.
returns true if mac address is determined to be a Hot Standby Router (HSRP) address
ie. 00-00-0C-07-AC-XX
returns true if mac address is determined to be a Hot Standby Router Version 2 (HSRPv2) address
ie. 00-00-0C-9F-FX-XX
returns true if mac address is determined to be a MS Network Load Balancing MAC address
ie. 02-BF-1-2-3-4 for unicast or 03-BF-1-2-3-4 for multicast
where 1-2-3-4 is the clusters primary IP address
for outbound packets, clusters members will send from 02-n-1-2-3-4 where n is the node priorty. this function does NOT return true for those adddresses.
returns true if mac address is determined to be a unicast address
returns true if mac address is determined to be locally administered
returns true if mac address is determined to be universally administered
returns the mac address normalized as a hexidecimal string that is 0 padded and without delimiters
001122aabbcc
returns mac address with the priority, a hash, then the mac address normalized with as_cisco
45#0011.22aa.bbcc
returns the mac address normalized as a hexidecimal string that is 0 padded with : delimiters and with 1,length leading where length is the number of hex pairs (ie 6 for EUI48)
1,6,00:11:22:aa:bb:cc
returns the mac address normalized as a hexidecimal string that is 0 padded and with . delimiting every 2nd octet (ie after every 4th character)
0011.22aa.bbcc
returns the mac address normalized as a hexidecimal string that is 0 padded and with : delimiting every octet (ie after every 2nd character)
00:34:56:78:9a:bc
returns the EUI-64 address in the format used for an IPv6 autoconf address suffix
returns the mac address normalized as a hexidecimal string that is 0 padded and with - delimiting every octet (ie after every 2nd character)
00-34-56-78-9a-bc
returns the mac address normalized as a hexidecimal string that is 0 padded and has a : in the middle of the hex string. this appears in the pgsql documentation along with the single dash version
001122:334455
returns the mac address normalized as a hexidecimal string that is 0 padded and has a dash in the middle of the hex string. this appears in the pgsql documentation.
001122-334455
returns the mac address normalized as a hexidecimal string that is not padded and with - delimiting every octet (ie after every 2nd character)
0-34-56-78-9a-bc
returns the mac address normalized as a hexidecimal string that is 0 padded and with - delimiting every octet (ie after every 2nd character) and each octect is bit-reversed order. So 10 00 5A 4D BC 96 becomes 08 00 5A B2 3D 69.
00-2d-6a-1e-59-3d
converts to EUI-48 (if the eui-64 was derived from eui-48)
this function will fail if the mac was not derived from eui-48. you will need to catch it and inspect the error message.
converts to EUI-64, or in other words encapsulates EUI-48 to become EUI-64 if needed
returns true if mac address in $mac is determined to be of the EUI48 standard
returns true if mac address in $mac is determined to be of the EUI64 standard
returns true if mac address in $mac is determined to be a multicast address
returns true if mac address in $mac is determined to be a broadcast address
returns true if mac address in $mac is determined to be a unicast address
returns true if mac address is $mac is determined to be a Virtual Router Redundancy (VRRP) address
returns true if mac address is $mac is determined to be a Hot Standby Router (HSRP) address
returns true if mac address is $mac is determined to be a Hot Standby Router Version 2 (HSRPv2) address
returns true if mac address is $mac is determined to be a MS Network Load Balancing address
ie. 02-BF-XX-XX-XX-XX or 03-BF-XX-XX-XX-XX
returns true if mac address in $mac is determined to be locally administered
returns true if mac address in $mac is determined to be universally administered
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and without delimiters
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded, with : delimiting and 1,length leading. length is the number of hex pairs (6 for EUI48)
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and with . delimiting every 2nd octet (ie after every 4th character)
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and with : delimiting every octet (ie after every 2nd character)
returns the mac address in $mac in the format used for an IPv6 autoconf address suffix
will convert from eui48 or eui64 if needed
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and with - delimiting every octet (ie after every 2nd character)
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and a single : delimiter in the middle. this format appears in their documenation, along with single dash version
003456:789abc
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and has a dash in the middle of the hex string. this appears in the pgsql documenation
returns the mac address in $mac normalized as a hexidecimal string that is not padded and with - delimiting every octet (ie after every 2nd character)
returns the mac address in $mac normalized as a hexidecimal string that is 0 padded and with - delimiting every octet (ie after every 2nd character) and each octect is bit-reversed order. So 10 00 5A 4D BC 96 becomes 08 00 5A B2 3D 69.
Prior to 0.8 every error resulted in a die (croak) which needed to be caught. As I have used this module more, having to catch them all the time is tiresome. So from 0.8 onwards, errors result in an undef and something being set.
For objects, this something is accessible via $self->errstr otherwise ther error is in $NetAddr::MAC::errstr;
If you would like to have die (croak) instead, you can either set the global $NetAddr::MAC::die_on_error or set the die_on_error option when creating an object. When creating objects, the provided option takes priority over the global. So if you set the global, then all objects will die - unless you specify otherwise.
Normal behaviour...
use NetAddr::MAC qw/mac_as_basic/; $mac = mac_as_basic('aaaa.bbbb.cccc') or die $NetAddr::MAC::errstr;
If you want to catch exceptions (die/croak's)...
use NetAddr::MAC qw/mac_as_basic/; $NetAddr::MAC::die_on_error = 1; # (or ++ if you like) eval { # or use Try::Tiny etc. $mac = mac_as_basic('aaaa.bbbb.cccc'); }; if ($@) { # something bad happened, so handle it } # all good, so do something
use NetAddr::MAC; my $obj = NetAddr::MAC->new( mac => 'aabbcc112233') or die $NetAddr::MAC::errstr; $mac = $obj->to_eui48 or die $obj->errstr;
use NetAddr::MAC; my $obj = NetAddr::MAC->new( mac => 'aabbcc112233', die_on_error => 1 ); eval { # or use Try::Tiny etc. $mac = $obj->to_eui48 }; if ($@) { # something bad happened, so handle it } # all good, so do something
Or do it globally
use NetAddr::MAC; $NetAddr::MAC::die_on_error = 1; # (or ++ if you like) my $obj = NetAddr::MAC->new( mac => 'aabbcc112233'); eval { # or use Try::Tiny etc. $mac = $obj->to_eui48 }; if ($@) { # something bad happened, so handle it }
Stolen lots of ideas and some pod content from Device::MAC and Net::MAC
- moare tests! - find bugs, squash them - merge in your changes!
Please use the RT system on CPAN to lodge bugs.
Many young people like to use Github, so by all means send me pull requests at
https://github.com/djzort/NetAddr-MAC
Dean Hamstead <dean@bytefoundry.com.au>
<dean@bytefoundry.com.au>
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
There are lots of systems at my (then) place of work which handle MAC addresses. There was lots of code validating and normalising them all over the place - most of it was quirky and sloppy. So I set about creating a reusable module to add to our SOE install so that MAC address handling would become consistent, reliable, powerful and trivial.
Generally speaking this module fulfills that goal. It's very convenient to be able to use MAC addresses in any format throughout those systems.
There are several other MAC address modules on CPAN. I didn't like the interface on one, the other dragged in Moose. So I created this module, taking the ideas I liked from the other two modules and adding in extra bits that I needed (and a few features just for completeness) whilst avoiding dependancies and avoiding anything that doesnt work on perl 5.6
I hope that the result is useful to others, the concept is to be able to create an object representing a MAC address based on a string that only very vaguely resembles a MAC address. From there, to be able to output normalised string representations of the mac address in a variety of common formats.
A templating function is deliberately omitted, as very niche outputs can easily be derived from the 'basic' format.
Feel free to send patches for features you add, I appreciate those who have done so far and endeavour to incoporate new patches ASAP.
To install NetAddr::MAC, copy and paste the appropriate command in to your terminal.
cpanm
cpanm NetAddr::MAC
CPAN shell
perl -MCPAN -e shell install NetAddr::MAC
For more information on module installation, please visit the detailed CPAN module installation guide.