++ed by:

4 PAUSE users
1 non-PAUSE user.

Alan Kasindorf
and 1 contributors


Perlbal::Manual::Configuration - How to configure Perlbal


Perlbal 1.78.


By default, Perlbal looks for a configuration file at /etc/perlbal/perlbal.conf.

You can also point perlbal at a different configuration file with the -c flag.

    $ perlbal -c /home/user/perlbal.conf

-c has the alias --conf.

Setting up Perlbal as a daemon

You can run perlbal as a daemon:

    $ perlbal --daemon -c /home/user/perlbal.conf

--daemon has the alias -d.

A common practice is to create a perlbal.sh file that supports the common operations you'll require (start, stop, restart) and place it under /etc/init.d. You can find a sample file in debian/perlbal.init.

Configuration file

A Perlbal's configuration file is a text file where you create pools and services, add servers to pools, set services' parameters and enable/disable services.

Indentation is not mandatory, but it's considered a good practice for readability issues.

Configuration is case insensitive, but it's also a good practice to uppercase all directives.


Here's a sample configuration of a pool:

    CREATE POOL mywebsite
        POOL mywebsite ADD
        POOL mywebsite ADD

The first line creates a pool called mywebsite. The second and third lines add two different servers to that pool.

From here on you'll be able to use this pool in a service.

Also, note that right after creating the pool, you don't need to specify which pool you're adding servers to, as it is considered to be the active pool:

    CREATE POOL mywebsite
        POOL ADD
        POOL ADD

Configuring a pool in a separate file

You can create a pool in a separate file by using the nodefile parameter:

    CREATE POOL dynamic
        SET nodefile = conf/nodelist.dat

This separate file should contain addresses in the form of ip:port, one per line (empty lines are ignored, as well as comments started by the # sign).

Perlbal will check the file periodically for updates.

The path to the file is relative to where perlbal was started.

Note that:

    SET pool nodefile = none
    (also undef, null, "", '')

...unsets the nodefile, but does not remove current members.

Also note: If you set a nodefile, then modify the pool via POOL ADD or POOL REMOVE, Perlbal will stop checking the nodefile for updates!

Check conf/load-balancer.conf and conf/nodelist.dat for an example.

Pool balance method

You can set the pool balance method:

    SET pool balance_method = 'random'

At the present time, random is the only load balancing method available.


Here's a sample service:

    CREATE SERVICE service_mywebsite
        SET role            = reverse_proxy
        SET pool            = mywebsite
        SET listen          =

The first line creates a service called service_mywebsite.

On the three following lines we are setting up three parameters for that service (you can see this same example in Perlbal::Manual::LoadBalancer in more detail).

It is good practice to always start a service with the definition of its role; this way you'll avoid error messages caused by attempting to set parameters that are only acceptable for certain roles while Perlbal doesn't know which role the service is supposed to be yet.

Setting parameters

You can set parameters via commands of either forms:

    SET <service-name> <param> = <value>
    SET <param> = <value>

For a full list of parameters see Perlbal::Manual::LoadBalancer, Perlbal::Manual::ReverseProxy or Perlbal::Manual::WebServer.

Note on types:

'bool' values can be set using one of 1, true, yes, on, 0, false, off, or no.

'size' values are in integer bytes, or an integer followed by 'b', 'k', or 'm' (case-insensitive) for bytes, KiB, or MiB.

Enabling/Disabling services

To enable a service:

    ENABLE service_mywebsite

To disable a service:

    DISABLE service_mywebsite

These lines is what allows you to have several services configured in a file even if they are not currently active (a common scenario is to configure everything on the file and then enable/disable services on-the-fly as required; see Perlbal::Manual::Management for more information on this process).

Including configuration files

While Perlbal doesn't natively let you include a configuration file within another, one of its core Plugins does.

By using Perlbal::Plugin::Include you can use this feature:

    LOAD include
    INCLUDE = /etc/perlbal/my.conf
    INCLUDE = /etc/perlbal/other.conf /etc/perlbal/*.conf

See Perlbal::Plugin::Include for further examples and more information.


The following things expand/interpolate in config files/commands:


Expands to the configured IP for interface "eth0". Probably only works on Linux.


Comments in Perlbal's configuration files start with a #:

    # this is a comment
    ENABLE myservice # this is also a comment

Environment variables


Used in Makefile.PL. If set to a true value the modules will not be built.


Used in Makefile.PL. If set to a true value only the modules will be built, not the perlbal executable.


There are four levels of debugging in Perlbal.

By setting this variable to a value between 0 and 4 (included) you will activate Perbal's debug.

    PERLBAL_DEBUG = 0 # no debug

    PERLBAL_DEBUG = 4 # debug everything

These four levels are described in more detail in Perlbal::Manual::Debugging.


By setting this variable to 1 you can tell Perlbal to add a X-PERLBAL-BUFFERED-UPLOAD-REASON header to requests that have to be buffered.

This can be useful to let your backend machine know that Perlbal is buffering the request.

The value of the header contains the reason why the request was buffered.


This is the variable you'll have to set to a true value in order to properly use the commands obj or track.

See Perlbal::Manual::Management for more information.


This is a variable used to test Perlbal's alpha features.

If you're a developer working on one of these features, first set the variable to a true value:


And then, on your test file, use something like:

    unless ($ENV{PERLBAL_TEST_ALPHA}) {
        plan skip_all => 'Alpha feature; test skipped without $ENV{PERLBAL_TEST_ALPHA}';
        exit 0;
    } else {
        plan tests => 4;


This is the variable you'll have to set to a true value in order to properly use the command state changes.

See Perlbal::Manual::Management for more information.


By setting to a true value you can enable Perlbal::XS::HTTPHeaders, if installed.

Note that if you enable Perlbal::XS::HTTPHeaders you won't have access to the fields of Perlbal::HTTPHeaders.


This variable is used by Perlbal::Test to test Perlbal.

TEST_PERLBAL_FOREGROUND with a true value tells Perlbal::Test that it should run a server in the foreground.

See Perlbal::Test for more information.


This variable is used by Perlbal::Test to test Perlbal.

If TEST_PERLBAL_USE_EXISTING is set to a true value then Perlbal::Test::start_server will be return a socket which is connected to an existing server's management port.

See Perlbal::Test for more information.