- SEE ALSO
Fuse - write filesystems in Perl using FUSE
use Fuse; my ($mountpoint) = ""; $mountpoint = shift(@ARGV) if @ARGV; Fuse::main(mountpoint=>$mountpoint, getattr=>\&my_getattr, getdir=>\&my_getdir, ...);
This lets you implement filesystems in perl, through the FUSE (Filesystem in USErspace) kernel/lib interface.
FUSE expects you to implement callbacks for the various functions.
NOTE: I have only tested the things implemented in example.pl! It should work, but some things may not.
In the following definitions, "errno" can be 0 (for a success), -EINVAL, -ENOENT, -EONFIRE, any integer less than 1 really.
You can import standard error constants by saying something like "use POSIX qw(EDOTDOT ENOANO);".
Every constant you need (file types, open() flags, error values, etc) can be imported either from POSIX or from Fcntl, often both. See their respective documentations, for more information.
FUSE_DEBUG by default.
You can request all exportable symbols by using the tag ":all".
You can request all debug symbols by using the tag ":debug". This will export FUSE_DEBUG.
You can request the extended attribute symbols by using the tag ":xattr". This will export XATTR_CREATE and XATTR_REPLACE.
Takes arguments in the form of hash key=>value pairs. There are many valid keys. Most of them correspond with names of callback functions, as described in section 'FUNCTIONS YOUR FILESYSTEM MAY IMPLEMENT'. A few special keys also exist:
debug => boolean
This turns FUSE call tracing on and off. Default is 0 (which means off).
mountpoint => string
The point at which to mount this filesystem. There is no default, you must specify this. An example would be '/mnt'.
mountopts => string
This is a comma seperated list of mount options to pass to the FUSE kernel module.
At present, it allows the specification of the allow_other argument when mounting the new FUSE filesystem. To use this, you will also need 'user_allow_other' in /etc/fuse.conf as per the FUSE documention
mountopts => "allow_other" or mountopts => ""
unthreaded => boolean
This turns FUSE multithreading off and on. NOTE: This perlmodule does not currently work properly in multithreaded mode! The author is unfortunately not familiar enough with perl-threads internals, and according to the documentation available at time of writing (2002-03-08), those internals are subject to changing anyway. Note that singlethreaded mode also means that you will not have to worry about reentrancy, though you will have to worry about recursive lookups (since the kernel holds a global lock on your filesystem and blocks waiting for one callback to complete before calling another).
I hope to add full multithreading functionality later, but for now, I recommend you leave this option at the default, 1 (which means unthreaded, no threads will be used and no reentrancy is needed).
Arguments: filename. Returns a list, very similar to the 'stat' function (see perlfunc). On error, simply return a single numeric scalar value (e.g. "return -ENOENT();").
FIXME: the "ino" field is currently ignored. I tried setting it to 0 in an example script, which consistently caused segfaults.
Fields (the following was stolen from perlfunc(1) with apologies):
($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = getattr($filename);
Here are the meaning of the fields:
0 dev device number of filesystem 1 ino inode number 2 mode file mode (type and permissions) 3 nlink number of (hard) links to the file 4 uid numeric user ID of file's owner 5 gid numeric group ID of file's owner 6 rdev the device identifier (special files only) 7 size total size of file, in bytes 8 atime last access time in seconds since the epoch 9 mtime last modify time in seconds since the epoch 10 ctime inode change time (NOT creation time!) in seconds since the epoch 11 blksize preferred block size for file system I/O 12 blocks actual number of blocks allocated
(The epoch was at 00:00 January 1, 1970 GMT.)
Arguments: link pathname. Returns a scalar: either a numeric constant, or a text string.
This is called when dereferencing symbolic links, to learn the target.
example rv: return "/proc/self/fd/stdin";
Arguments: Containing directory name. Returns a list: 0 or more text strings (the filenames), followed by a numeric errno (usually 0).
This is used to obtain directory listings. Its opendir(), readdir(), filldir() and closedir() all in one call.
example rv: return ('.', 'a', 'b', 0);
Arguments: Filename, numeric modes, numeric device Returns an errno (0 upon success, as usual).
This function is called for all non-directory, non-symlink nodes, not just devices.
Arguments: New directory pathname, numeric modes. Returns an errno.
Called to create a directory.
Arguments: Filename. Returns an errno.
Called to remove a file, device, or symlink.
Arguments: Pathname. Returns an errno.
Called to remove a directory.
Arguments: Existing filename, symlink name. Returns an errno.
Called to create a symbolic link.
Arguments: old filename, new filename. Returns an errno.
Called to rename a file, and/or move a file from one directory to another.
Arguments: Existing filename, hardlink name. Returns an errno.
Called to create hard links.
Arguments: Pathname, numeric modes. Returns an errno.
Called to change permissions on a file/directory/device/symlink.
Arguments: Pathname, numeric uid, numeric gid. Returns an errno.
Called to change ownership of a file/directory/device/symlink.
Arguments: Pathname, numeric offset. Returns an errno.
Called to truncate a file, at the given offset.
Arguments: Pathname, numeric actime, numeric modtime. Returns an errno.
Called to change access/modification times for a file/directory/device/symlink.
Arguments: Pathname, numeric flags (which is an OR-ing of stuff like O_RDONLY and O_SYNC, constants you can import from POSIX). Returns an errno.
No creation, or trunctation flags (O_CREAT, O_EXCL, O_TRUNC) will be passed to open(). Your open() method needs only check if the operation is permitted for the given flags, and return 0 for success.
Arguments: Pathname, numeric requestedsize, numeric offset. Returns a numeric errno, or a string scalar with up to $requestedsize bytes of data.
Called in an attempt to fetch a portion of the file.
Arguments: Pathname, scalar buffer, numeric offset. You can use length($buffer) to find the buffersize. Returns an errno.
Called in an attempt to write (or overwrite) a portion of the file. Be prepared because $buffer could contain random binary data with NULLs and all sorts of other wonderful stuff.
Arguments: none Returns any of the following:
$namelen, $files, $files_free, $blocks, $blocks_avail, $blocksize
-ENOANO(), $namelen, $files, $files_free, $blocks, $blocks_avail, $blocksize
Arguments: Pathname Returns an errno or 0 on success.
Called to synchronise any cached data. This is called before the file is closed. It may be called multiple times before a file is closed.
Arguments: Pathname, numeric flags passed to open Returns an errno or 0 on success.
Called to indicate that there are no more references to the file. Called once for every file with the same pathname and flags as were passed to open.
Arguments: Pathname, numeric flags Returns an errno or 0 on success.
Called to synchronise the file's contents. If flags is non-zero, only synchronise the user data. Otherwise synchronise the user and meta data.
Arguments: Pathname, extended attribute's name, extended attribute's value, numeric flags (which is an OR-ing of XATTR_CREATE and XATTR_REPLACE Returns an errno or 0 on success.
Called to set the value of the named extended attribute.
If you wish to reject setting of a particular form of extended attribute name (e.g.: regexps matching user\..* or security\..*), then return - EOPNOTSUPP.
If flags is set to XATTR_CREATE and the extended attribute already exists, this should fail with - EEXIST. If flags is set to XATTR_REPLACE and the extended attribute doesn't exist, this should fail with - ENOATTR.
XATTR_CREATE and XATTR_REPLACE are provided by this module, but not exported by default. To import them:
use Fuse ':xattr';
use Fuse ':all';
Arguments: Pathname, extended attribute's name Returns an errno, 0 if there was no value, or the extended attribute's value.
Called to get the value of the named extended attribute.
Arguments: Pathname Returns a list: 0 or more text strings (the extended attribute names), followed by a numeric errno (usually 0).
Arguments: Pathname, extended attribute's name Returns an errno or 0 on success.
Mark Glines, <firstname.lastname@example.org>
perl, the FUSE documentation.