List::AllUtils - Combines List::Util and List::MoreUtils in one bite-sized package
version 0.03
use List::AllUtils qw( first any ); # _Everything_ from List::Util and List::MoreUtils use List::AllUtils qw( :all ); # or don't import anything return List::AllUtils::first { $_ > 5 } @numbers;
Are you sick of trying to remember whether a particular helper is defined in List::Util or List::MoreUtils? I sure am. Now you don't have to remember. This module will export all of the functions that either of those two modules defines.
List::Util
List::MoreUtils
(Shamelessly copied from List::Util and List::MoreUtils ...)
Similar to grep in that it evaluates BLOCK setting $_ to each element of LIST in turn. first returns the first element where the result from BLOCK is a true value. If BLOCK never returns true or LIST was empty then undef is returned.
grep
$_
first
undef
$foo = first { defined($_) } @list # first defined value in @list $foo = first { $_ > $value } @list # first value in @list which # is greater than $value
This function could be implemented using reduce like this
reduce
$foo = reduce { wanted($a) ? $a : wanted($b) ? $b : undef } undef, @list
for example wanted() could be defined() which would return the first defined value in @list
Returns the entry in the list with the highest numerical value. If the list is empty then undef is returned.
$foo = max 1..10 # 10 $foo = max 3,9,12 # 12 $foo = max @bar, @baz # whatever
$foo = reduce { $a > $b ? $a : $b } 1..10
Similar to max, but treats all the entries in the list as strings and returns the highest string as defined by the gt operator. If the list is empty then undef is returned.
max
gt
$foo = maxstr 'A'..'Z' # 'Z' $foo = maxstr "hello","world" # "world" $foo = maxstr @bar, @baz # whatever
$foo = reduce { $a gt $b ? $a : $b } 'A'..'Z'
Similar to max but returns the entry in the list with the lowest numerical value. If the list is empty then undef is returned.
$foo = min 1..10 # 1 $foo = min 3,9,12 # 3 $foo = min @bar, @baz # whatever
$foo = reduce { $a < $b ? $a : $b } 1..10
Similar to min, but treats all the entries in the list as strings and returns the lowest string as defined by the lt operator. If the list is empty then undef is returned.
min
lt
$foo = minstr 'A'..'Z' # 'A' $foo = minstr "hello","world" # "hello" $foo = minstr @bar, @baz # whatever
$foo = reduce { $a lt $b ? $a : $b } 'A'..'Z'
Reduces LIST by calling BLOCK, in a scalar context, multiple times, setting $a and $b each time. The first call will be with $a and $b set to the first two elements of the list, subsequent calls will be done by setting $a to the result of the previous call and $b to the next element in the list.
$a
$b
Returns the result of the last call to BLOCK. If LIST is empty then undef is returned. If LIST only contains one element then that element is returned and BLOCK is not executed.
$foo = reduce { $a < $b ? $a : $b } 1..10 # min $foo = reduce { $a lt $b ? $a : $b } 'aa'..'zz' # minstr $foo = reduce { $a + $b } 1 .. 10 # sum $foo = reduce { $a . $b } @bar # concat
Returns the elements of LIST in a random order
@cards = shuffle 0..51 # 0..51 in a random order
Returns the sum of all the elements in LIST. If LIST is empty then undef is returned.
$foo = sum 1..10 # 55 $foo = sum 3,9,12 # 24 $foo = sum @bar, @baz # whatever
$foo = reduce { $a + $b } 1..10
Returns a true value if any item in LIST meets the criterion given through BLOCK. Sets $_ for each item in LIST in turn:
print "At least one value undefined" if any { ! defined($_) } @list;
Returns false otherwise, or if LIST is empty.
Returns a true value if all items in LIST meet the criterion given through BLOCK, or if LIST is empty. Sets $_ for each item in LIST in turn:
print "All items defined" if all { defined($_) } @list;
Returns false otherwise.
Logically the negation of any. Returns a true value if no item in LIST meets the criterion given through BLOCK, or if LIST is empty. Sets $_ for each item in LIST in turn:
any
print "No value defined" if none { defined($_) } @list;
Logically the negation of all. Returns a true value if not all items in LIST meet the criterion given through BLOCK. Sets $_ for each item in LIST in turn:
all
print "Not all values defined" if notall { defined($_) } @list;
Counts the number of elements in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:
printf "%i item(s) are defined", true { defined($_) } @list;
Counts the number of elements in LIST for which the criterion in BLOCK is false. Sets $_ for each item in LIST in turn:
printf "%i item(s) are not defined", false { defined($_) } @list;
Returns the index of the first element in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:
my @list = (1, 4, 3, 2, 4, 6); printf "item with index %i in list is 4", firstidx { $_ == 4 } @list; __END__ item with index 1 in list is 4
Returns -1 if no such item could be found.
-1
first_index is an alias for firstidx.
first_index
firstidx
Returns the index of the last element in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:
my @list = (1, 4, 3, 2, 4, 6); printf "item with index %i in list is 4", lastidx { $_ == 4 } @list; __END__ item with index 4 in list is 4
last_index is an alias for lastidx.
last_index
lastidx
Inserts VALUE after the first item in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn.
my @list = qw/This is a list/; insert_after { $_ eq "a" } "longer" => @list; print "@list"; __END__ This is a longer list
Inserts VALUE after the first item in LIST which is equal to STRING.
my @list = qw/This is a list/; insert_after_string "a", "longer" => @list; print "@list"; __END__ This is a longer list
Applies BLOCK to each item in LIST and returns a list of the values after BLOCK has been applied. In scalar context, the last element is returned. This function is similar to map but will not modify the elements of the input list:
map
my @list = (1 .. 4); my @mult = apply { $_ *= 2 } @list; print "\@list = @list\n"; print "\@mult = @mult\n"; __END__ @list = 1 2 3 4 @mult = 2 4 6 8
Think of it as syntactic sugar for
for (my @mult = @list) { $_ *= 2 }
Returns a list of values of LIST upto (and not including) the point where BLOCK returns a true value. Sets $_ for each element in LIST in turn.
Same as before but also includes the element for which BLOCK is true.
before
Returns a list of the values of LIST after (and not including) the point where BLOCK returns a true value. Sets $_ for each element in LIST in turn.
@x = after { $_ % 5 == 0 } (1..9); # returns 6, 7, 8, 9
Same as after but also inclues the element for which BLOCK is true.
after
Evaluates BLOCK for each element in LIST (assigned to $_) and returns a list of the indices of those elements for which BLOCK returned a true value. This is just like grep only that it returns indices instead of values:
@x = indexes { $_ % 2 == 0 } (1..10); # returns 1, 3, 5, 7, 9
Returns the first element in LIST for which BLOCK evaluates to true. Each element of LIST is set to $_ in turn. Returns undef if no such element has been found.
first_val is an alias for firstval.
first_val
firstval
Returns the last value in LIST for which BLOCK evaluates to true. Each element of LIST is set to $_ in turn. Returns undef if no such element has been found.
last_val is an alias for lastval.
last_val
lastval
Evaluates BLOCK for each pair of elements in ARRAY1 and ARRAY2 and returns a new list consisting of BLOCK's return values. The two elements are set to $a and $b. Note that those two are aliases to the original value so changing them will modify the input arrays.
@a = (1 .. 5); @b = (11 .. 15); @x = pairwise { $a + $b } @a, @b; # returns 12, 14, 16, 18, 20 # mesh with pairwise @a = qw/a b c/; @b = qw/1 2 3/; @x = pairwise { ($a, $b) } @a, @b; # returns a, 1, b, 2, c, 3
Creates an array iterator to return the elements of the list of arrays ARRAY1, ARRAY2 throughout ARRAYn in turn. That is, the first time it is called, it returns the first element of each array. The next time, it returns the second elements. And so on, until all elements are exhausted.
This is useful for looping over more than one array at once:
my $ea = each_array(@a, @b, @c); while ( my ($a, $b, $c) = $ea->() ) { .... }
The iterator returns the empty list when it reached the end of all arrays.
If the iterator is passed an argument of 'index', then it retuns the index of the last fetched set of values, as a scalar.
index
Like each_array, but the arguments are references to arrays, not the plain arrays.
Creates an array iterator, for looping over an array in chunks of $n items at a time. (n at a time, get it?). An example is probably a better explanation than I could give in words.
$n
Example:
my @x = ('a' .. 'g'); my $it = natatime 3, @x; while (my @vals = $it->()) { print "@vals\n"; }
This prints
a b c d e f g
Returns a list consisting of the first elements of each array, then the second, then the third, etc, until all arrays are exhausted.
Examples:
@x = qw/a b c d/; @y = qw/1 2 3 4/; @z = mesh @x, @y; # returns a, 1, b, 2, c, 3, d, 4 @a = ('x'); @b = ('1', '2'); @c = qw/zip zap zot/; @d = mesh @a, @b, @c; # x, 1, zip, undef, 2, zap, undef, undef, zot
zip is an alias for mesh.
zip
mesh
Returns a new list by stripping duplicate values in LIST. The order of elements in the returned list is the same as in LIST. In scalar context, returns the number of unique elements in LIST.
my @x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 1 2 3 5 4 my $x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 5
Calculates the minimum and maximum of LIST and returns a two element list with the first element being the minimum and the second the maximum. Returns the empty list if LIST was empty.
The minmax algorithm differs from a naive iteration over the list where each element is compared to two values being the so far calculated min and max value in that it only requires 3n/2 - 2 comparisons. Thus it is the most efficient possible algorithm.
minmax
However, the Perl implementation of it has some overhead simply due to the fact that there are more lines of Perl code involved. Therefore, LIST needs to be fairly big in order for minmax to win over a naive implementation. This limitation does not apply to the XS version.
Partitions LIST based on the return value of BLOCK which denotes into which partition the current value is put.
Returns a list of the partitions thusly created. Each partition created is a reference to an array.
my $i = 0; my @part = part { $i++ % 2 } 1 .. 8; # returns [1, 3, 5, 7], [2, 4, 6, 8]
You can have a sparse list of partitions as well where non-set partitions will be undef:
my @part = part { 2 } 1 .. 10; # returns undef, undef, [ 1 .. 10 ]
Be careful with negative values, though:
my @part = part { -1 } 1 .. 10; __END__ Modification of non-creatable array value attempted, subscript -1 ...
Negative values are only ok when they refer to a partition previously created:
my @idx = ( 0, 1, -1 ); my $i = 0; my @part = part { $idx[$++ % 3] } 1 .. 8; # [1, 4, 7], [2, 3, 5, 6, 8]
This module exports nothing by default. You can import functions by name, or get everything with the :all tag.
:all
List::Util and List::MoreUtils, obviously.
Also see Util::Any, which unifies many more util modules, and also lets you rename functions as part of the import.
Util::Any
Please report any bugs or feature requests to bug-list-allutils@rt.cpan.org, or through the web interface at http://rt.cpan.org. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.
bug-list-allutils@rt.cpan.org
Dave Rolsky <autarch@urth.org>
This software is copyright (c) 2012 by Dave Rolsky.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.
To install List::AllUtils, copy and paste the appropriate command in to your terminal.
cpanm
cpanm List::AllUtils
CPAN shell
perl -MCPAN -e shell install List::AllUtils
For more information on module installation, please visit the detailed CPAN module installation guide.