The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.

NAME

PDL::PP - Generate PDL routines from concise descriptions

SYNOPSIS

e.g.

        pp_def(
                'sumover',
                Pars => 'a(n); [o]b();',
                Code => q{
                        double tmp=0;
                        loop(n) %{
                                tmp += $a();
                        %}
                        $b() = tmp;
                },
        );

        pp_done();

FUNCTIONS

Here is a quick reference list of the functions provided by PDL::PP.

pp_add_boot

Add code to the BOOT section of generated XS file

pp_add_exported

Add functions to the list of exported functions

pp_add_isa

Add entries to the @ISA list

pp_addbegin

Sets code to be added at the top of the generate .pm file

pp_addhdr

Add code and includes to C section of the generated XS file

pp_addpm

Add code to the generated .pm file

pp_addxs

Add extra XS code to the generated XS file

pp_beginwrap

Add BEGIN-block wrapping to code for the generated .pm file

pp_bless

Sets the package to which the XS code is added (default is PDL)

pp_boundscheck

Control state of PDL bounds checking activity

pp_core_importList

Specify what is imported from PDL::Core

pp_def

Define a new PDL function

pp_deprecate_module

Add runtime and POD warnings about a module being deprecated

pp_done

Mark the end of PDL::PP definitions in the file

pp_export_nothing

Clear out the export list for your generated module

pp_line_numbers

Add line number information to simplify debugging of PDL::PP code

pp_setversion

Set the version for .pm and .xs files

OVERVIEW

Why do we need PP? Several reasons: firstly, we want to be able to generate subroutine code for each of the PDL datatypes (PDL_Byte, PDL_Short, etc). AUTOMATICALLY. Secondly, when referring to slices of PDL arrays in Perl (e.g. $x->slice('0:10:2,:') or other things such as transposes) it is nice to be able to do this transparently and to be able to do this 'in-place' - i.e, not to have to make a memory copy of the section. PP handles all the necessary element and offset arithmetic for you. There are also the notions of threading (repeated calling of the same routine for multiple slices, see PDL::Indexing) and dataflow (see PDL::Dataflow) which use of PP allows.

In much of what follows we will assume familiarity of the reader with the concepts of implicit and explicit threading and index manipulations within PDL. If you have not yet heard of these concepts or are not very comfortable with them it is time to check PDL::Indexing.

As you may appreciate from its name PDL::PP is a Pre-Processor, i.e. it expands code via substitutions to make real C-code. Technically, the output is XS code (see perlxs) but that is very close to C.

So how do you use PP? Well for the most part you just write ordinary C code except for special PP constructs which take the form:

   $something(something else)

or:

   PPfunction %{
     <stuff>
   %}

The most important PP construct is the form $array(). Consider the very simple PP function to sum the elements of a 1D vector (in fact this is very similar to the actual code used by 'sumover'):

   pp_def('sumit',
       Pars => 'a(n);  [o]b();',
       Code => q{
           double tmp;
           tmp = 0;
           loop(n) %{
               tmp += $a();
           %}
           $b() = tmp;
       }
   );

What's going on? The Pars => line is very important for PP - it specifies all the arguments and their dimensionality. We call this the signature of the PP function (compare also the explanations in PDL::Indexing). In this case the routine takes a 1-D function as input and returns a 0-D scalar as output. The $a() PP construct is used to access elements of the array a(n) for you - PP fills in all the required C code.

You will notice that we are using the q{} single-quote operator. This is not an accident. You generally want to use single quotes to denote your PP Code sections. PDL::PP uses $var() for its parsing and if you don't use single quotes, Perl will try to interpolate $var(). Also, using the single quote q operator with curly braces makes it look like you are creating a code block, which is What You Mean. (Perl is smart enough to look for nested curly braces and not close the quote until it finds the matching curly brace, so it's safe to have nested blocks.) Under other circumstances, such as when you're stitching together a Code block using string concatenations, it's often easiest to use real single quotes as

 Code => 'something'.$interpolatable.'somethingelse;'

In the simple case here where all elements are accessed the PP construct loop(n) %{ ... %} is used to loop over all elements in dimension n. Note this feature of PP: ALL DIMENSIONS ARE SPECIFIED BY NAME.

This is made clearer if we avoid the PP loop() construct and write the loop explicitly using conventional C:

   pp_def('sumit',
       Pars => 'a(n);  [o]b();',
       Code => q{
           PDL_Indx i,n_size;
           double tmp;
           n_size = $SIZE(n);
           tmp = 0;
           for(i=0; i<n_size; i++) {
               tmp += $a(n=>i);
           }
           $b() = tmp;
       },
   );

which does the same as before, but is more long-winded. You can see to get element i of a() we say $a(n=>i) - we are specifying the dimension by name n. In 2D we might say:

   Pars=>'a(m,n);',
      ...
      tmp += $a(m=>i,n=>j);
      ...

The syntax m=>i borrows from Perl hashes, which are in fact used in the implementation of PP. One could also say $a(n=>j,m=>i) as order is not important.

You can also see in the above example the use of another PP construct - $SIZE(n) to get the length of the dimension n.

It should, however, be noted that you shouldn't write an explicit C-loop when you could have used the PP loop construct since PDL::PP checks automatically the loop limits for you, usage of loop makes the code more concise, etc. But there are certainly situations where you need explicit control of the loop and now you know how to do it ;).

To revisit 'Why PP?' - the above code for sumit() will be generated for each data-type. It will operate on slices of arrays 'in-place'. It will thread automatically - e.g. if a 2D array is given it will be called repeatedly for each 1D row (again check PDL::Indexing for the details of threading). And then b() will be a 1D array of sums of each row. We could call it with $x->xchg(0,1) to sum the columns instead. And Dataflow tracing etc. will be available.

You can see PP saves the programmer from writing a lot of needlessly repetitive C-code -- in our opinion this is one of the best features of PDL making writing new C subroutines for PDL an amazingly concise exercise. A second reason is the ability to make PP expand your concise code definitions into different C code based on the needs of the computer architecture in question. Imagine for example you are lucky to have a supercomputer at your hands; in that case you want PDL::PP certainly to generate code that takes advantage of the vectorising/parallel computing features of your machine (this a project for the future). In any case, the bottom line is that your unchanged code should still expand to working XS code even if the internals of PDL changed.

Also, because you are generating the code in an actual Perl script, there are many fun things that you can do. Let's say that you need to write both sumit (as above) and multit. With a little bit of creativity, we can do

   for({Name => 'sumit', Init => '0', Op => '+='},
       {Name => 'multit', Init => '1', Op => '*='}) {
           pp_def($_->{Name},
                   Pars => 'a(n);  [o]b();',
                   Code => '
                        double tmp;
                        tmp = '.$_->{Init}.';
                        loop(n) %{
                          tmp '.$_->{Op}.' $a();
                        %}
                        $b() = tmp;
           ');
   }

which defines both the functions easily. Now, if you later need to change the signature or dimensionality or whatever, you only need to change one place in your code. Yeah, sure, your editor does have 'cut and paste' and 'search and replace' but it's still less bothersome and definitely more difficult to forget just one place and have strange bugs creep in. Also, adding 'orit' (bitwise or) later is a one-liner.

And remember, you really have Perl's full abilities with you - you can very easily read any input file and make routines from the information in that file. For simple cases like the above, the author (Tjl) currently favors the hash syntax like the above - it's not too much more characters than the corresponding array syntax but much easier to understand and change.

We should mention here also the ability to get the pointer to the beginning of the data in memory - a prerequisite for interfacing PDL to some libraries. This is handled with the $P(var) directive, see below.

When starting work on a new pp_def'ined function, if you make a mistake, you will usually find a pile of compiler errors indicating line numbers in the generated XS file. If you know how to read XS files (or if you want to learn the hard way), you could open the generated XS file and search for the line number with the error. However, a recent addition to PDL::PP helps report the correct line number of your errors: pp_line_numbers. Working with the original summit example, if you had a mis-spelling of tmp in your code, you could change the (erroneous) code to something like this and the compiler would give you much more useful information:

   pp_def('sumit',
       Pars => 'a(n);  [o]b();',
       Code => pp_line_numbers(__LINE__, q{
           double tmp;
           tmp = 0;
           loop(n) %{
               tmp += $a();
           %}
           $b() = rmp;
       })
   );

For the above situation, my compiler tells me:

 ...
 test.pd:15: error: 'rmp' undeclared (first use in this function)
 ...

In my example script (called test.pd), line 15 is exactly the line at which I made my typo: rmp instead of tmp.

So, after this quick overview of the general flavour of programming PDL routines using PDL::PP let's summarise in which circumstances you should actually use this preprocessor/precompiler. You should use PDL::PP if you want to

  • interface PDL to some external library

  • write some algorithm that would be slow if coded in Perl (this is not as often as you think; take a look at threading and dataflow first).

  • be a PDL developer (and even then it's not obligatory)

WARNING

Because of its architecture, PDL::PP can be both flexible and easy to use on the one hand, yet exuberantly complicated at the same time. Currently, part of the problem is that error messages are not very informative and if something goes wrong, you'd better know what you are doing and be able to hack your way through the internals (or be able to figure out by trial and error what is wrong with your args to pp_def). Although work is being done to produce better warnings, do not be afraid to send your questions to the mailing list if you run into trouble.

DESCRIPTION

Now that you have some idea how to use pp_def to define new PDL functions it is time to explain the general syntax of pp_def. pp_def takes as arguments first the name of the function you are defining and then a hash list that can contain various keys.

Based on these keys PP generates XS code and a .pm file. The function pp_done (see example in the SYNOPSIS) is used to tell PDL::PP that there are no more definitions in this file and it is time to generate the .xs and .pm file.

As a consequence, there may be several pp_def() calls inside a file (by convention files with PP code have the extension .pd or .pp) but generally only one pp_done().

There are two main different types of usage of pp_def(), the 'data operation' and 'slice operation' prototypes.

The 'data operation' is used to take some data, mangle it and output some other data; this includes for example the '+' operation, matrix inverse, sumover etc and all the examples we have talked about in this document so far. Implicit and explicit threading and the creation of the result are taken care of automatically in those operations. You can even do dataflow with sumit, sumover, etc (don't be dismayed if you don't understand the concept of dataflow in PDL very well yet; it is still very much experimental).

The 'slice operation' is a different kind of operation: in a slice operation, you are not changing any data, you are defining correspondences between different elements of two piddles (examples include the index manipulation/slicing function definitions in the file slices.pd that is part of the PDL distribution; but beware, this is not introductory level stuff).

If PDL was compiled with support for bad values (i.e. WITH_BADVAL => 1), then additional keys are required for pp_def, as explained below.

If you are just interested in communicating with some external library (for example some linear algebra/matrix library), you'll usually want the 'data operation' so we are going to discuss that first.

Data operation

A simple example

In the data operation, you must know what dimensions of data you need. First, an example with scalars:

        pp_def('add',
                Pars => 'a(); b(); [o]c();',
                Code => '$c() = $a() + $b();'
        );

That looks a little strange but let's dissect it. The first line is easy: we're defining a routine with the name 'add'. The second line simply declares our parameters and the parentheses mean that they are scalars. We call the string that defines our parameters and their dimensionality the signature of that function. For its relevance with regard to threading and index manipulations check the PDL::Indexing man page.

The third line is the actual operation. You need to use the dollar signs and parentheses to refer to your parameters (this will probably change at some point in the future, once a good syntax is found).

These lines are all that is necessary to actually define the function for PDL (well, actually it isn't; you additionally need to write a Makefile.PL (see below) and build the module (something like 'perl Makefile.PL; make'); but let's ignore that for the moment). So now you can do

        use MyModule;
        $x = pdl 2,3,4;
        $y = pdl 5;

        $c = add($x,$y);
        # or
        add($x,$y,($c=null)); # Alternative form, useful if $c has been
                              # preset to something big, not useful here.

and have threading work correctly (the result is $c == [7 8 9]).

The Pars section: the signature of a PP function

Seeing the above example code you will most probably ask: what is this strange $c=null syntax in the second call to our new add function? If you take another look at the definition of add you will notice that the third argument c is flagged with the qualifier [o] which tells PDL::PP that this is an output argument. So the above call to add means 'create a new $c from scratch with correct dimensions' - null is a special token for 'empty piddle' (you might ask why we haven't used the value undef to flag this instead of the PDL specific null; we are currently thinking about it ;).

[This should be explained in some other section of the manual as well!!] The reason for having this syntax as an alternative is that if you have really huge piddles, you can do

        $c = PDL->null;
        for(some long loop) {
                # munge a,b
                add($x,$y,$c);
                # munge c, put something back to x,y
        }

and avoid allocating and deallocating $c each time. It is allocated once at the first add() and thereafter the memory stays until $c is destroyed.

If you just say

  $c =  add($x,$y);

the code generated by PP will automatically fill in $c=null and return the result. If you want to learn more about the reasons why PDL::PP supports this style where output arguments are given as last arguments check the PDL::Indexing man page.

[o] is not the only qualifier a pdl argument can have in the signature. Another important qualifier is the [t] option which flags a pdl as temporary. What does that mean? You tell PDL::PP that this pdl is only used for temporary results in the course of the calculation and you are not interested in its value after the computation has been completed. But why should PDL::PP want to know about this in the first place? The reason is closely related to the concepts of pdl auto creation (you heard about that above) and implicit threading. If you use implicit threading the dimensionality of automatically created pdls is actually larger than that specified in the signature. With [o] flagged pdls will be created so that they have the additional dimensions as required by the number of implicit thread dimensions. When creating a temporary pdl, however, it will always only be made big enough so that it can hold the result for one iteration in a thread loop, i.e. as large as required by the signature. So less memory is wasted when you flag a pdl as temporary. Secondly, you can use output auto creation with temporary pdls even when you are using explicit threading which is forbidden for normal output pdls flagged with [o] (see PDL::Indexing).

Here is an example where we use the [t] qualifier. We define the function callf that calls a C routine f which needs a temporary array of the same size and type as the array a (sorry about the forward reference for $P; it's a pointer access, see below) :

  pp_def('callf',
        Pars => 'a(n); [t] tmp(n); [o] b()',
        Code => 'PDL_Indx ns = $SIZE(n);
                 f($P(a),$P(b),$P(tmp),ns);
                '
  );

Argument dimensions and the signature

Now we have just talked about dimensions of pdls and the signature. How are they related? Let's say that we want to add a scalar + the index number to a vector:

        pp_def('add2',
                Pars => 'a(n); b(); [o]c(n);',
                Code => 'loop(n) %{
                                $c() = $a() + $b() + n;
                         %}'
        );

There are several points to notice here: first, the Pars argument now contains the n arguments to show that we have a single dimensions in a and c. It is important to note that dimensions are actual entities that are accessed by name so this declares a and c to have the same first dimensions. In most PP definitions the size of named dimensions will be set from the respective dimensions of non-output pdls (those with no [o] flag) but sometimes you might want to set the size of a named dimension explicitly through an integer parameter. See below in the description of the OtherPars section how that works.

Constant argument dimensions in the signature

Suppose you want an output piddle to be created automatically and you know that on every call its dimension will have the same size (say 9) regardless of the dimensions of the input piddles. In this case you use the following syntax in the Pars section to specify the size of the dimension:

    ' [o] y(n=9); '

As expected, extra dimensions required by threading will be created if necessary. If you need to assign a named dimension according to a more complicated formula (than a constant) you must use the RedoDimsCode key described below.

Type conversions and the signature

The signature also determines the type conversions that will be performed when a PP function is invoked. So what happens when we invoke one of our previously defined functions with pdls of different type, e.g.

  add2($x,$y,($ret=null));

where $x is of type PDL_Float and $y of type PDL_Short? With the signature as shown in the definition of add2 above the datatype of the operation (as determined at runtime) is that of the pdl with the 'highest' type (sequence is byte < short < ushort < long < float < double). In the add2 example the datatype of the operation is float ($x has that datatype). All pdl arguments are then type converted to that datatype (they are not converted inplace but a copy with the right type is created if a pdl argument doesn't have the type of the operation). Null pdls don't contribute a type in the determination of the type of the operation. However, they will be created with the datatype of the operation; here, for example, $ret will be of type float. You should be aware of these rules when calling PP functions with pdls of different types to take the additional storage and runtime requirements into account.

These type conversions are correct for most functions you normally define with pp_def. However, there are certain cases where slightly modified type conversion behaviour is desired. For these cases additional qualifiers in the signature can be used to specify the desired properties with regard to type conversion. These qualifiers can be combined with those we have encountered already (the creation qualifiers [o] and [t]). Let's go through the list of qualifiers that change type conversion behaviour.

The most important is the indx qualifier which comes in handy when a pdl argument represents indices into another pdl. Let's take a look at an example from PDL::Ufunc:

   pp_def('maximum_ind',
          Pars => 'a(n); indx [o] b()',
          Code => '$GENERIC() cur;
                   PDL_Indx curind;
                   loop(n) %{
                    if (!n || $a() > cur) {cur = $a(); curind = n;}
                   %}
                   $b() = curind;',
   );

The function maximum_ind finds the index of the largest element of a vector. If you look at the signature you notice that the output argument b has been declared with the additional indx qualifier. This has the following consequences for type conversions: regardless of the type of the input pdl a the output pdl b will be of type PDL_Indx which makes sense since b will represent an index into a.

Note that 'curind' is declared as type PDL_Indx and not indx. While most datatype declarations in the 'Pars' section use the same name as the underlying C type, indx is a type which is sufficient to handle PDL indexing operations. For 32-bit installs, it can be a 32-bit integer type. For 64-bit installs, it will be a 64-bit integer type.

Furthermore, if you call the function with an existing output pdl b its type will not influence the datatype of the operation (see above). Hence, even if a is of a smaller type than b it will not be converted to match the type of b but stays untouched, which saves memory and CPU cycles and is the right thing to do when b represents indices. Also note that you can use the 'indx' qualifier together with other qualifiers (the [o] and [t] qualifiers). Order is significant -- type qualifiers precede creation qualifiers ([o] and [t]).

The above example also demonstrates typical usage of the $GENERIC() macro. It expands to the current type in a so called generic loop. What is a generic loop? As you already heard a PP function has a runtime datatype as determined by the type of the pdl arguments it has been invoked with. The PP generated XS code for this function therefore contains a switch like switch (type) {case PDL_Byte: ... case PDL_Double: ...} that selects a case based on the runtime datatype of the function (it's called a type ``loop'' because there is a loop in PP code that generates the cases). In any case your code is inserted once for each PDL type into this switch statement. The $GENERIC() macro just expands to the respective type in each copy of your parsed code in this switch statement, e.g., in the case PDL_Byte section cur will expand to PDL_Byte and so on for the other case statements. I guess you realise that this is a useful macro to hold values of pdls in some code.

There are a couple of other qualifiers with similar effects as indx. For your convenience there are the float and double qualifiers with analogous consequences on type conversions as indx. Let's assume you have a very large array for which you want to compute row and column sums with an equivalent of the sumover function. However, with the normal definition of sumover you might run into problems when your data is, e.g. of type short. A call like

  sumover($large_pdl,($sums = null));

will result in $sums be of type short and is therefore prone to overflow errors if $large_pdl is a very large array. On the other hand calling

  @dims = $large_pdl->dims; shift @dims;
  sumover($large_pdl,($sums = zeroes(double,@dims)));

is not a good alternative either. Now we don't have overflow problems with $sums but at the expense of a type conversion of $large_pdl to double, something bad if this is really a large pdl. That's where double comes in handy:

  pp_def('sumoverd',
         Pars => 'a(n); double [o] b()',
         Code => 'double tmp=0;
                  loop(n) %{ tmp += a(); %}
                  $b() = tmp;',
  );

This gets us around the type conversion and overflow problems. Again, analogous to the indx qualifier double results in b always being of type double regardless of the type of a without leading to a type conversion of a as a side effect.

Finally, there are the type+ qualifiers where type is one of int or float. What shall that mean. Let's illustrate the int+ qualifier with the actual definition of sumover:

  pp_def('sumover',
         Pars => 'a(n); int+ [o] b()',
         Code => '$GENERIC(b) tmp=0;
                  loop(n) %{ tmp += a(); %}
                  $b() = tmp;',
  );

As we had already seen for the int, float and double qualifiers, a pdl marked with a type+ qualifier does not influence the datatype of the pdl operation. Its meaning is "make this pdl at least of type type or higher, as required by the type of the operation". In the sumover example this means that when you call the function with an a of type PDL_Short the output pdl will be of type PDL_Long (just as would have been the case with the int qualifier). This again tries to avoid overflow problems when using small datatypes (e.g. byte images). However, when the datatype of the operation is higher than the type specified in the type+ qualifier b will be created with the datatype of the operation, e.g. when a is of type double then b will be double as well. We hope you agree that this is sensible behaviour for sumover. It should be obvious how the float+ qualifier works by analogy. It may become necessary to be able to specify a set of alternative types for the parameters. However, this will probably not be implemented until someone comes up with a reasonable use for it.

Note that we now had to specify the $GENERIC macro with the name of the pdl to derive the type from that argument. Why is that? If you carefully followed our explanations you will have realised that in some cases b will have a different type than the type of the operation. Calling the '$GENERIC' macro with b as argument makes sure that the type will always the same as that of b in that part of the generic loop.

This is about all there is to say about the Pars section in a pp_def call. You should remember that this section defines the signature of a PP defined function, you can use several options to qualify certain arguments as output and temporary args and all dimensions that you can later refer to in the Code section are defined by name.

It is important that you understand the meaning of the signature since in the latest PDL versions you can use it to define threaded functions from within Perl, i.e. what we call Perl level threading. Please check PDL::Indexing for details.

The Code section

The Code section contains the actual XS code that will be in the innermost part of a thread loop (if you don't know what a thread loop is then you still haven't read PDL::Indexing; do it now ;) after any PP macros (like $GENERIC) and PP functions have been expanded (like the loop function we are going to explain next).

Let's quickly reiterate the sumover example:

  pp_def('sumover',
         Pars => 'a(n); int+ [o] b()',
         Code => '$GENERIC(b) tmp=0;
                  loop(n) %{ tmp += a(); %}
                  $b() = tmp;',
  );

The loop construct in the Code section also refers to the dimension name so you don't need to specify any limits: the loop is correctly sized and everything is done for you, again.

Next, there is the surprising fact that $a() and $b() do not contain the index. This is not necessary because we're looping over n and both variables know which dimensions they have so they automatically know they're being looped over.

This feature comes in very handy in many places and makes for much shorter code. Of course, there are times when you want to circumvent this; here is a function which make a matrix symmetric and serves as an example of how to code explicit looping:

        pp_def('symm',
                Pars => 'a(n,n); [o]c(n,n);',
                Code => 'loop(n) %{
                                int n2;
                                for(n2=n; n2<$SIZE(n); n2++) {
                                        $c(n0 => n, n1 => n2) =
                                        $c(n0 => n2, n1 => n) =
                                         $a(n0 => n, n1 => n2);
                                }
                        %}
                '
        );

Let's dissect what is happening. Firstly, what is this function supposed to do? From its signature you see that it takes a 2D matrix with equal numbers of columns and rows and outputs a matrix of the same size. From a given input matrix $a it computes a symmetric output matrix $c (symmetric in the matrix sense that A^T = A where ^T means matrix transpose, or in PDL parlance $c == $c->xchg(0,1)). It does this by using only the values on and below the diagonal of $a. In the output matrix $c all values on and below the diagonal are the same as those in $a while those above the diagonal are a mirror image of those below the diagonal (above and below are here interpreted in the way that PDL prints 2D pdls). If this explanation still sounds a bit strange just go ahead, make a little file into which you write this definition, build the new PDL extension (see section on Makefiles for PP code) and try it out with a couple of examples.

Having explained what the function is supposed to do there are a couple of points worth noting from the syntactical point of view. First, we get the size of the dimension named n again by using the $SIZE macro. Second, there are suddenly these funny n0 and n1 index names in the code though the signature defines only the dimension n. Why this? The reason becomes clear when you note that both the first and second dimension of $a and $b are named n in the signature of symm. This tells PDL::PP that the first and second dimension of these arguments should have the same size. Otherwise the generated function will raise a runtime error. However, now in an access to $a and $c PDL::PP cannot figure out which index n refers to any more just from the name of the index. Therefore, the indices with equal dimension names get numbered from left to right starting at 0, e.g. in the above example n0 refers to the first dimension of $a and $c, n1 to the second and so on.

In all examples so far, we have only used the Pars and Code members of the hash that was passed to pp_def. There are certainly other keys that are recognised by PDL::PP and we will hear about some of them in the course of this document. Find a (non-exhaustive) list of keys in Appendix A. A list of macros and PPfunctions (we have only encountered some of those in the examples above yet) that are expanded in values of the hash argument to pp_def is summarised in Appendix B.

At this point, it might be appropriate to mention that PDL::PP is not a completely static, well designed set of routines (as Tuomas puts it: "stop thinking of PP as a set of routines carved in stone") but rather a collection of things that the PDL::PP author (Tuomas J. Lukka) considered he would have to write often into his PDL extension routines. PP tries to be expandable so that in the future, as new needs arise, new common code can be abstracted back into it. If you want to learn more on why you might want to change PDL::PP and how to do it check the section on PDL::PP internals.

Handling bad values

If you do not have bad-value support compiled into PDL you can ignore this section and the related keys: BadCode, HandleBad, ... (try printing out the value of $PDL::Bad::Status - if it equals 0 then move straight on).

There are several keys and macros used when writing code to handle bad values. The first one is the HandleBad key:

HandleBad => 0

This flags a pp-routine as NOT handling bad values. If this routine is sent piddles with their badflag set, then a warning message is printed to STDOUT and the piddles are processed as if the value used to represent bad values is a valid number. The badflag value is not propagated to the output piddles.

An example of when this is used is for FFT routines, which generally do not have a way of ignoring part of the data.

HandleBad => 1

This causes PDL::PP to write extra code that ensures the BadCode section is used, and that the $ISBAD() macro (and its brethren) work.

HandleBad is not given

If any of the input piddles have their badflag set, then the output piddles will have their badflag set, but any supplied BadCode is ignored.

The value of HandleBad is used to define the contents of the BadDoc key, if it is not given.

To handle bad values, code must be written somewhat differently; for instance,

 $c() = $a() + $b();

becomes something like

 if ( $a() != BADVAL && $b() != BADVAL ) {
    $c() = $a() + $b();
 } else {
    $c() = BADVAL;
 }

However, we only want the second version if bad values are present in the input piddles (and that bad-value support is wanted!) - otherwise we actually want the original code. This is where the BadCode key comes in; you use it to specify the code to execute if bad values may be present, and PP uses both it and the Code section to create something like:

 if ( bad_values_are_present ) {
    fancy_threadloop_stuff {
       BadCode
    }
 } else {
    fancy_threadloop_stuff {
       Code
    }
 }

This approach means that there is virtually no overhead when bad values are not present (i.e. the badflag routine returns 0).

The C preprocessor symbol PDL_BAD_CODE is defined when the bad code is compiled, so that you can reduce the amount of code you write. The BadCode section can use the same macros and looping constructs as the Code section. However, it wouldn't be much use without the following additional macros:

$ISBAD(var)

To check whether a piddle's value is bad, use the $ISBAD macro:

 if ( $ISBAD(a()) ) { printf("a() is bad\n"); }

You can also access given elements of a piddle:

 if ( $ISBAD(a(n=>l)) ) { printf("element %d of a() is bad\n", l); }
$ISGOOD(var)

This is the opposite of the $ISBAD macro.

$SETBAD(var)

For when you want to set an element of a piddle bad.

$ISBADVAR(c_var,pdl)

If you have cached the value of a piddle $a() into a c-variable (foo say), then to check whether it is bad, use $ISBADVAR(foo,a).

$ISGOODVAR(c_var,pdl)

As above, but this time checking that the cached value isn't bad.

$SETBADVAR(c_var,pdl)

To copy the bad value for a piddle into a c variable, use $SETBADVAR(foo,a).

TODO: mention $PPISBAD() etc macros.

Using these macros, the above code could be specified as:

 Code => '$c() = $a() + $b();',
 BadCode => '
    if ( $ISBAD(a()) || $ISBAD(b()) ) {
       $SETBAD(c());
    } else {
       $c() = $a() + $b();
    }',

Since this is Perl, TMTOWTDI, so you could also write:

 BadCode => '
    if ( $ISGOOD(a()) && $ISGOOD(b()) ) {
       $c() = $a() + $b();
    } else {
       $SETBAD(c());
    }',

You can reduce code repition using the C PDL_BAD_CODE macro, using the same code for both of the Code and BadCode sections:

    #ifdef PDL_BAD_CODE
    if ( $ISGOOD(a()) && $ISGOOD(b()) ) {
    #endif PDL_BAD_CODE

       $c() = $a() + $b();

    #ifdef PDL_BAD_CODE
    } else {
       $SETBAD(c());
    }
    #endif PDL_BAD_CODE

If you want access to the value of the badflag for a given piddle, you can use the PDL STATE macros:

$ISPDLSTATEBAD(pdl)
$ISPDLSTATEGOOD(pdl)
$SETPDLSTATEBAD(pdl)
$SETPDLSTATEGOOD(pdl)

TODO: mention the FindBadStatusCode and CopyBadStatusCode options to pp_def, as well as the BadDoc key.

Interfacing your own/library functions using PP

Now, consider the following: you have your own C function (that may in fact be part of some library you want to interface to PDL) which takes as arguments two pointers to vectors of double:

        void myfunc(int n,double *v1,double *v2);

The correct way of defining the PDL function is

        pp_def('myfunc',
                Pars => 'a(n); [o]b(n);',
                GenericTypes => ['D'],
                Code => 'myfunc($SIZE(n),$P(a),$P(b));'
        );

The $P(par) syntax returns a pointer to the first element and the other elements are guaranteed to lie after that.

Notice that here it is possible to make many mistakes. First, $SIZE(n) must be used instead of n. Second, you shouldn't put any loops in this code. Third, here we encounter a new hash key recognised by PDL::PP : the GenericTypes declaration tells PDL::PP to ONLY GENERATE THE TYPELOOP FOP THE LIST OF TYPES SPECIFIED. In this case double. This has two advantages. Firstly the size of the compiled code is reduced vastly, secondly if non-double arguments are passed to myfunc() PDL will automatically convert them to double before passing to the external C routine and convert them back afterwards.

One can also use Pars to qualify the types of individual arguments. Thus one could also write this as:

        pp_def('myfunc',
                Pars => 'double a(n); double [o]b(n);',
                Code => 'myfunc($SIZE(n),$P(a),$P(b));'
        );

The type specification in Pars exempts the argument from variation in the typeloop - rather it is automatically converted too and from the type specified. This is obviously useful in a more general example, e.g.:

        void myfunc(int n,float *v1,long *v2);

        pp_def('myfunc',
                Pars => 'float a(n); long [o]b(n);',
                GenericTypes => ['F'],
                Code => 'myfunc($SIZE(n),$P(a),$P(b));'
        );

Note we still use GenericTypes to reduce the size of the type loop, obviously PP could in principle spot this and do it automatically though the code has yet to attain that level of sophistication!

Finally note when types are converted automatically one MUST use the [o] qualifier for output variables or you hard one changes will get optimised away by PP!

If you interface a large library you can automate the interfacing even further. Perl can help you again(!) in doing this. In many libraries you have certain calling conventions. This can be exploited. In short, you can write a little parser (which is really not difficult in Perl) that then generates the calls to pp_def from parsed descriptions of the functions in that library. For an example, please check the Slatec interface in the Lib tree of the PDL distribution. If you want to check (during debugging) which calls to PP functions your Perl code generated a little helper package comes in handy which replaces the PP functions by identically named ones that dump their arguments to stdout.

Just say

   perl -MPDL::PP::Dump myfile.pd

to see the calls to pp_def and friends. Try it with ops.pd and slatec.pd. If you're interested (or want to enhance it), the source is in Basic/Gen/PP/Dump.pm

Other macros and functions in the Code section

Macros: So far we have encountered the $SIZE, $GENERIC and $P macros. Now we are going to quickly explain the other macros that are expanded in the Code section of PDL::PP along with examples of their usage.

$T

The $T macro is used for type switches. This is very useful when you have to use different external (e.g. library) functions depending on the input type of arguments. The general syntax is

        $Ttypeletters(type_alternatives)

where typeletters is a permutation of a subset of the letters BSULFD which stand for Byte, Short, Ushort, etc. and type_alternatives are the expansions when the type of the PP operation is equal to that indicated by the respective letter. Let's illustrate this incomprehensible description by an example. Assuming you have two C functions with prototypes

  void float_func(float *in, float *out);
  void double_func(double *in, double *out);

which do basically the same thing but one accepts float and the other double pointers. You could interface them to PDL by defining a generic function foofunc (which will call the correct function depending on the type of the transformation):

  pp_def('foofunc',
        Pars => ' a(n); [o] b();',
        Code => ' $TFD(float_func,double_func) ($P(a),$P(b));'
        GenericTypes => [qw(F D)],
  );

Please note that you can't say

       Code => ' $TFD(float,double)_func ($P(a),$P(b));'

since the $T macro expands with trailing spaces, analogously to C preprocessor macros. The slightly longer form illustrated above is correct. If you really want brevity, you can of course do

        '$TBSULFD('.(join ',',map {"long_identifier_name_$_"}
                qw/byt short unseigned lounge flotte dubble/).');'
$PP

The $PP macro is used for a so called physical pointer access. The physical refers to some internal optimisations of PDL (for those who are familiar with the PDL core we are talking about the vaffine optimisations). This macro is mainly for internal use and you shouldn't need to use it in any of your normal code.

$COMP (and the OtherPars section)

The $COMP macro is used to access non-pdl values in the code section. Its name is derived from the implementation of transformations in PDL. The variables you can refer to using $COMP are members of the ``compiled'' structure that represents the PDL transformation in question but does not yet contain any information about dimensions (for further details check PDL::Internals). However, you can treat $COMP just as a black box without knowing anything about the implementation of transformations in PDL. So when would you use this macro? Its main usage is to access values of arguments that are declared in the OtherPars section of a pp_def definition. But then you haven't heard about the OtherPars key yet?! Let's have another example that illustrates typical usage of both new features:

  pp_def('pnmout',
        Pars => 'a(m)',
        OtherPars => "char* fd",
        GenericTypes => [qw(B U S L)],
        Code => 'PerlIO *fp;
                 IO *io;

               io = GvIO(gv_fetchpv($COMP(fd),FALSE,SVt_PVIO));
                 if (!io || !(fp = IoIFP(io)))
                        croak("Can\'t figure out FP");

                 if (PerlIO_write(fp,$P(a),len) != len)
                                croak("Error writing pnm file");
  ');

This function is used to write data from a pdl to a file. The file descriptor is passed as a string into this function. This parameter does not go into the Pars section since it cannot be usefully treated like a pdl but rather into the aptly named OtherPars section. Parameters in the OtherPars section follow those in the Pars section when invoking the function, i.e.

   open FILE,">out.dat" or die "couldn't open out.dat";
   pnmout($pdl,'FILE');

When you want to access this parameter inside the code section you have to tell PP by using the $COMP macro, i.e. you write $COMP(fd) as in the example. Otherwise PP wouldn't know that the fd you are referring to is the same as that specified in the OtherPars section.

Another use for the OtherPars section is to set a named dimension in the signature. Let's have an example how that is done:

  pp_def('setdim',
        Pars => '[o] a(n)',
        OtherPars => 'int ns => n',
        Code => 'loop(n) %{ $a() = n; %}',
  );

This says that the named dimension n will be initialised from the value of the other parameter ns which is of integer type (I guess you have realised that we use the CType From => named_dim syntax). Now you can call this function in the usual way:

  setdim(($x=null),5);
  print $x;
    [ 0 1 2 3 4 ]

Admittedly this function is not very useful but it demonstrates how it works. If you call the function with an existing pdl and you don't need to explicitly specify the size of n since PDL::PP can figure it out from the dimensions of the non-null pdl. In that case you just give the dimension parameter as -1:

  $x = hist($y);
  setdim($x,-1);

That should do it.

The only PP function that we have used in the examples so far is loop. Additionally, there are currently two other functions which are recognised in the Code section:

threadloop

As we heard above the signature of a PP defined function defines the dimensions of all the pdl arguments involved in a primitive operation. However, you often call the functions that you defined with PP with pdls that have more dimensions than those specified in the signature. In this case the primitive operation is performed on all subslices of appropriate dimensionality in what is called a thread loop (see also overview above and PDL::Indexing). Assuming you have some notion of this concept you will probably appreciate that the operation specified in the code section should be optimised since this is the tightest loop inside a thread loop. However, if you revisit the example where we define the pnmout function, you will quickly realise that looking up the IO file descriptor in the inner thread loop is not very efficient when writing a pdl with many rows. A better approach would be to look up the IO descriptor once outside the thread loop and use its value then inside the tightest thread loop. This is exactly where the threadloop function comes in handy. Here is an improved definition of pnmout which uses this function:

  pp_def('pnmout',
        Pars => 'a(m)',
        OtherPars => "char* fd",
        GenericTypes => [qw(B U S L)],
        Code => 'PerlIO *fp;
                 IO *io;
                 int len;

               io = GvIO(gv_fetchpv($COMP(fd),FALSE,SVt_PVIO));
                 if (!io || !(fp = IoIFP(io)))
                        croak("Can\'t figure out FP");

                 len = $SIZE(m) * sizeof($GENERIC());

                 threadloop %{
                    if (PerlIO_write(fp,$P(a),len) != len)
                                croak("Error writing pnm file");
                 %}
  ');

This works as follows. Normally the C code you write inside the Code section is placed inside a thread loop (i.e. PP generates the appropriate wrapping XS code around it). However, when you explicitly use the threadloop function, PDL::PP recognises this and doesn't wrap your code with an additional thread loop. This has the effect that code you write outside the thread loop is only executed once per transformation and just the code with in the surrounding %{ ... %} pair is placed within the tightest thread loop. This also comes in handy when you want to perform a decision (or any other code, especially CPU intensive code) only once per thread, i.e.

  pp_addhdr('
    #define RAW 0
    #define ASCII 1
  ');
  pp_def('do_raworascii',
         Pars => 'a(); b(); [o]c()',
         OtherPars => 'int mode',
       Code => ' switch ($COMP(mode)) {
                    case RAW:
                        threadloop %{
                            /* do raw stuff */
                        %}
                        break;
                    case ASCII:
                        threadloop %{
                            /* do ASCII stuff */
                        %}
                        break;
                    default:
                        croak("unknown mode");
                   }'
   );
types

The types function works similar to the $T macro. However, with the types function the code in the following block (delimited by %{ and %} as usual) is executed for all those cases in which the datatype of the operation is any of the types represented by the letters in the argument to type, e.g.

     Code => '...

             types(BSUL) %{
                 /* do integer type operation */
             %}
             types(FD) %{
                 /* do floating point operation */
             %}
             ...'

The RedoDimsCode Section

The RedoDimsCode key is an optional key that is used to compute dimensions of piddles at runtime in case the standard rules for computing dimensions from the signature are not sufficient. The contents of the RedoDimsCode entry is interpreted in the same way that the Code section is interpreted-- i.e., PP macros are expanded and the result is interpreted as C code. The purpose of the code is to set the size of some dimensions that appear in the signature. Storage allocation and threadloops and so forth will be set up as if the computed dimension had appeared in the signature. In your code, you first compute the desired size of a named dimension in the signature according to your needs and then assign that value to it via the $SIZE() macro.

As an example, consider the following situation. You are interfacing an external library routine that requires an temporary array for workspace to be passed as an argument. Two input data arrays that are passed are p(m) and x(n). The output data array is y(n). The routine requires a workspace array with a length of n+m*m, and you'd like the storage created automatically just like it would be for any piddle flagged with [t] or [o]. What you'd like is to say something like

 pp_def( "myexternalfunc",
  Pars => " p(m);  x(n);  [o] y; [t] work(n+m*m); ", ...

but that won't work, because PP can't interpret expressions with arithmetic in the signature. Instead you write

  pp_def(
      "myexternalfunc",
      Pars         => ' p(m);  x(n);  [o] y(); [t] work(wn); ',
      RedoDimsCode => '
        PDL_Indx im = $PDL(p)->dims[0];
        PDL_Indx in = $PDL(x)->dims[0];
        PDL_Indx min = in + im * im;
        PDL_Indx inw = $PDL(work)->dims[0];
        $SIZE(wn) = inw >= min ? inw : min;
      ',
      Code => '
        externalfunc( $P(p), $P(x), $SIZE(m), $SIZE(n), $P(work) );
      '
  );

This code works as follows: The macro $PDL(p) expands to a pointer to the pdl struct for the piddle p. You don't want a pointer to the data ( ie $P ) in this case, because you want to access the methods for the piddle on the C level. You get the first dimension of each of the piddles and store them in integers. Then you compute the minimum length the work array can be. If the user sent a piddle work with sufficient storage, then leave it alone. If the user sent, say a null pdl, or no pdl at all, then the size of wn will be zero and you reset it to the minimum value. Before the code in the Code section is executed PP will create the proper storage for work if it does not exist. Note that you only took the first dimension of p and x because the user may have sent piddles with extra threading dimensions. Of course, the temporary piddle work (note the [t] flag) should not be given any thread dimensions anyway.

You can also use RedoDimsCode to set the dimension of a piddle flagged with [o]. In this case you set the dimensions for the named dimension in the signature using $SIZE() as in the preceding example. However, because the piddle is flagged with [o] instead of [t], threading dimensions will be added if required just as if the size of the dimension were computed from the signature according to the usual rules. Here is an example from PDL::Math

 pp_def("polyroots",
      Pars => 'cr(n); ci(n); [o]rr(m); [o]ri(m);',
      RedoDimsCode => 'PDL_Indx sn = $PDL(cr)->dims[0]; $SIZE(m) = sn-1;',

The input piddles are the real and imaginary parts of complex coefficients of a polynomial. The output piddles are real and imaginary parts of the roots. There are n roots to an nth order polynomial and such a polynomial has n+1 coefficients (the zeoreth through the nth). In this example, threading will work correctly. That is, the first dimension of the output piddle with have its dimension adjusted, but other threading dimensions will be assigned just as if there were no RedoDimsCode.

Typemap handling in the OtherPars section

The OtherPars section discussed above is very often absolutely crucial when you interface external libraries with PDL. However in many cases the external libraries either use derived types or pointers of various types.

The standard way to handle this in Perl is to use a typemap file. This is discussed in some detail in perlxs in the standard Perl documentation. In PP the functionality is very similar, so you can create a typemap file in the directory where your PP file resides and when it is built it is automatically read in to figure out the appropriate translation between the C type and Perl's built-in type.

That said, there are a couple of important differences from the general handling of types in XS. The first, and probably most important, is that at the moment pointers to types are not allowed in the OtherPars section. To get around this limitation you must use the IV type (thanks to Judd Taylor for pointing out that this is necessary for portability).

It is probably best to illustrate this with a couple of code-snippets:

For instance the gsl_spline_init function has the following C declaration:

    int  gsl_spline_init(gsl_spline * spline,
          const double xa[], const double ya[], size_t size);

Clearly the xa and ya arrays are candidates for being passed in as piddles and the size argument is just the length of these piddles so that can be handled by the $SIZE() macro in PP. The problem is the pointer to the gsl_spline type. The natural solution would be to write an OtherPars declaration of the form

    OtherPars => 'gsl_spline *spl'

and write a short typemap file which handled this type. This does not work at present however! So what you have to do is to go around the problem slightly (and in some ways this is easier too!):

The solution is to declare spline in the OtherPars section using an "Integer Value", IV. This hides the nature of the variable from PP and you then need to (well to avoid compiler warnings at least!) perform a type cast when you use the variable in your code. Thus OtherPars should take the form:

    OtherPars => 'IV spl'

and when you use it in the code you will write

    INT2PTR(gsl_spline *, $COMP(spl))

where the Perl API macro INT2PTR has been used to handle the pointer cast to avoid compiler warnings and problems for machines with mixed 32bit and 64bit Perl configurations. Putting this together as Andres Jordan has done (with the modification using IV by Judd Taylor) in the gsl_interp.pd in the distribution source you get:

     pp_def('init_meat',
            Pars => 'double x(n); double y(n);',
            OtherPars => 'IV spl',
            Code =>'
         gsl_spline_init,( INT2PTR(gsl_spline *, $COMP(spl)), $P(x),$P(y),$SIZE(n)));'
    );

where I have removed a macro wrapper call, but that would obscure the discussion.

The other minor difference as compared to the standard typemap handling in Perl, is that the user cannot specify non-standard typemap locations or typemap filenames using the TYPEMAPS option in MakeMaker... Thus you can only use a file called typemap and/or the IV trick above.

Other useful PP keys in data operation definitions

You have already heard about the OtherPars key. Currently, there are not many other keys for a data operation that will be useful in normal (whatever that is) PP programming. In fact, it would be interesting to hear about a case where you think you need more than what is provided at the moment. Please speak up on one of the PDL mailing lists. Most other keys recognised by pp_def are only really useful for what we call slice operations (see also above).

One thing that is strongly being planned is variable number of arguments, which will be a little tricky.

An incomplete list of the available keys:

Inplace

Setting this key marks the routine as working inplace - ie the input and output piddles are the same. An example is $x->inplace->sqrt() (or sqrt(inplace($x))).

Inplace => 1

Use when the routine is a unary function, such as sqrt.

Inplace => ['a']

If there are more than one input piddles, specify the name of the one that can be changed inplace using an array reference.

Inplace => ['a','b']

If there are more than one output piddle, specify the name of the input piddle and output piddle in a 2-element array reference. This probably isn't needed, but left in for completeness.

If bad values are being used, care must be taken to ensure the propagation of the badflag when inplace is being used; consider this excerpt from Basic/Bad/bad.pd:

  pp_def('replacebad',HandleBad => 1,
    Pars => 'a(); [o]b();',
    OtherPars => 'double newval',
    Inplace => 1,
    CopyBadStatusCode => 
    '/* propagate badflag if inplace AND it has changed */
     if ( a == b && $ISPDLSTATEBAD(a) )
       PDL->propagate_badflag( b, 0 );

     /* always make sure the output is "good" */
     $SETPDLSTATEGOOD(b);
    ',
    ...

Since this routine removes all bad values, then the output piddle had its bad flag cleared. If run inplace (so a == b), then we have to tell all the children of a that the bad flag has been cleared (to save time we make sure that we call PDL->propagate_badgflag only if the input piddle had its bad flag set).

NOTE: one idea is that the documentation for the routine could be automatically flagged to indicate that it can be executed inplace, ie something similar to how HandleBad sets BadDoc if it's not supplied (it's not an ideal solution).

Other PDL::PP functions to support concise package definition

So far, we have described the pp_def and pp_done functions. PDL::PP exports a few other functions to aid you in writing concise PDL extension package definitions.

pp_addhdr

Often when you interface library functions as in the above example you have to include additional C include files. Since the XS file is generated by PP we need some means to make PP insert the appropriate include directives in the right place into the generated XS file. To this end there is the pp_addhdr function. This is also the function to use when you want to define some C functions for internal use by some of the XS functions (which are mostly functions defined by pp_def). By including these functions here you make sure that PDL::PP inserts your code before the point where the actual XS module section begins and will therefore be left untouched by xsubpp (cf. perlxs and perlxstut man pages).

A typical call would be

  pp_addhdr('
  #include <unistd.h>       /* we need defs of XXXX */
  #include "libprotos.h"    /* prototypes of library functions */
  #include "mylocaldecs.h"  /* Local decs */

  static void do_the real_work(PDL_Byte * in, PDL_Byte * out, int n)
  {
        /* do some calculations with the data */
  }
  ');

This ensures that all the constants and prototypes you need will be properly included and that you can use the internal functions defined here in the pp_defs, e.g.:

  pp_def('barfoo',
         Pars => ' a(n); [o] b(n)',
         GenericTypes => ['B'],
         Code => ' PDL_Indx ns = $SIZE(n);
                   do_the_real_work($P(a),$P(b),ns);
                 ',
  );

pp_addpm

In many cases the actual PP code (meaning the arguments to pp_def calls) is only part of the package you are currently implementing. Often there is additional Perl code and XS code you would normally have written into the pm and XS files which are now automatically generated by PP. So how to get this stuff into those dynamically generated files? Fortunately, there are a couple of functions, generally called pp_addXXX that assist you in doing this.

Let's assume you have additional Perl code that should go into the generated pm-file. This is easily achieved with the pp_addpm command:

   pp_addpm(<<'EOD');

   =head1 NAME

   PDL::Lib::Mylib -- a PDL interface to the Mylib library

   =head1 DESCRIPTION

   This package implements an interface to the Mylib package with full
   threading and indexing support (see L<PDL::Indexing>).

   =cut

   use PGPLOT;

   =head2 use_myfunc
        this function applies the myfunc operation to all the
        elements of the input pdl regardless of dimensions
        and returns the sum of the result
   =cut

   sub use_myfunc {
        my $pdl = shift;

        myfunc($pdl->clump(-1),($res=null));

        return $res->sum;
   }

   EOD

pp_add_exported

You have probably got the idea. In some cases you also want to export your additional functions. To avoid getting into trouble with PP which also messes around with the @EXPORT array you just tell PP to add your functions to the list of exported functions:

  pp_add_exported('use_myfunc gethynx');

pp_add_isa

The pp_add_isa command works like the the pp_add_exported function. The arguments to pp_add_isa are added the @ISA list, e.g.

  pp_add_isa(' Some::Other::Class ');

pp_bless

If your pp_def routines are to be used as object methods use pp_bless to specify the package (i.e. class) to which your pp_defed methods will be added. For example, pp_bless('PDL::MyClass'). The default is PDL if this is omitted.

pp_addxs

Sometimes you want to add extra XS code of your own (that is generally not involved with any threading/indexing issues but supplies some other functionality you want to access from the Perl side) to the generated XS file, for example

  pp_addxs('','

  # Determine endianness of machine

  int
  isbigendian()
     CODE:
       unsigned short i;
       PDL_Byte *b;

       i = 42; b = (PDL_Byte*) (void*) &i;

       if (*b == 42)
          RETVAL = 0;
       else if (*(b+1) == 42)
          RETVAL = 1;
       else
          croak("Impossible - machine is neither big nor little endian!!\n");
       OUTPUT:
         RETVAL
  ');

Especially pp_add_exported and pp_addxs should be used with care. PP uses PDL::Exporter, hence letting PP export your function means that they get added to the standard list of function exported by default (the list defined by the export tag ``:Func''). If you use pp_addxs you shouldn't try to do anything that involves threading or indexing directly. PP is much better at generating the appropriate code from your definitions.

pp_add_boot

Finally, you may want to add some code to the BOOT section of the XS file (if you don't know what that is check perlxs). This is easily done with the pp_add_boot command:

  pp_add_boot(<<EOB);
        descrip = mylib_initialize(KEEP_OPEN);

        if (descrip == NULL)
           croak("Can't initialize library");

        GlobalStruc->descrip = descrip;
        GlobalStruc->maxfiles = 200;
  EOB

pp_export_nothing

By default, PP.pm puts all subs defined using the pp_def function into the output .pm file's EXPORT list. This can create problems if you are creating a subclassed object where you don't want any methods exported. (i.e. the methods will only be called using the $object->method syntax).

For these cases you can call pp_export_nothing() to clear out the export list. Example (At the end of the .pd file):

  pp_export_nothing();
  pp_done();

pp_core_importList

By default, PP.pm puts the 'use Core;' line into the output .pm file. This imports Core's exported names into the current namespace, which can create problems if you are over-riding one of Core's methods in the current file. You end up getting messages like "Warning: sub sumover redefined in file subclass.pm" when running the program.

For these cases the pp_core_importList can be used to change what is imported from Core.pm. For example:

  pp_core_importList('()') 

This would result in

  use Core();

being generated in the output .pm file. This would result in no names being imported from Core.pm. Similarly, calling

  pp_core_importList(' qw/ barf /')

would result in

  use Core qw/ barf/;

being generated in the output .pm file. This would result in just 'barf' being imported from Core.pm.

pp_setversion

I am pretty sure that this allows you to simultaneously set the .pm and .xs files' versions, thus avoiding unnecessary version-skew between the two. To use this, simply have the following line at some point in your .pd file:

 pp_setversion('0.0.3');

However, don't use this if you use Module::Build::PDL. See that module's documentation for details.

pp_deprecate_module

If a particular module is deemed obsolete, this function can be used to mark it as deprecated. This has the effect of emitting a warning when a user tries to use the module. The generated POD for this module also carries a deprecation notice. The replacement module can be passed as an argument like this:

 pp_deprecate_module( infavor => "PDL::NewNonDeprecatedModule" );

Note that function affects only the runtime warning and the POD.

Making your PP function "private"

Let's say that you have a function in your module called PDL::foo that uses the PP function bar_pp to do the heavy lifting. But you don't want to advertise that bar_pp exists. To do this, you must move your PP function to the top of your module file, then call

 pp_export_nothing()

to clear the EXPORT list. To ensure that no documentation (even the default PP docs) is generated, set

 Doc => undef

and to prevent the function from being added to the symbol table, set

 PMFunc => ''

in your pp_def declaration (see Image2D.pd for an example). This will effectively make your PP function "private." However, it is always accessible via PDL::bar_pp due to Perl's module design. But making it private will cause the user to go very far out of his or her way to use it, so he or she shoulders the consequences!

Slice operation

The slice operation section of this manual is provided using dataflow and lazy evaluation: when you need it, ask Tjl to write it. a delivery in a week from when I receive the email is 95% probable and two week delivery is 99% probable.

And anyway, the slice operations require a much more intimate knowledge of PDL internals than the data operations. Furthermore, the complexity of the issues involved is considerably higher than that in the average data operation. If you would like to convince yourself of this fact take a look at the Basic/Slices/slices.pd file in the PDL distribution :-). Nevertheless, functions generated using the slice operations are at the heart of the index manipulation and dataflow capabilities of PDL.

Also, there are a lot of dirty issues with virtual piddles and vaffines which we shall entirely skip here.

Slices and bad values

Slice operations need to be able to handle bad values (if support is compiled into PDL). The easiest thing to do is look at Basic/Slices/slices.pd to see how this works.

Along with BadCode, there are also the BadBackCode and BadRedoDimsCode keys for pp_def. However, any EquivCPOffsCode should not need changing, since any changes are absorbed into the definition of the $EQUIVCPOFFS() macro (i.e. it is handled automatically by PDL::PP).

A few notes on writing a slicing routine...

The following few paragraphs describe writing of a new slicing routine ('range'); any errors are CED's. (--CED 26-Aug-2002)

Handling of warn and barf in PP Code

For printing warning messages or aborting/dieing, you can call warn or barf from PP code. However, you should be aware that these calls have been redefined using C preprocessor macros to PDL->barf and PDL->warn. These redefinitions are in place to keep you from inadvertently calling perl's warn or barf directly, which can cause segfaults during pthreading (i.e. processor multi-threading).

PDL's own versions of barf and warn will queue-up warning or barf messages until after pthreading is completed, and then call the perl versions of these routines.

See PDL::ParallelCPU for more information on pthreading.

USEFUL ROUTINES

The PDL Core structure, defined in Basic/Core/pdlcore.h.PL, contains pointers to a number of routines that may be useful to you. The majority of these routines deal with manipulating piddles, but some are more general:

PDL->qsort_B( PDL_Byte *xx, PDL_Indx a, PDL_Indx b )

Sort the array xx between the indices a and b. There are also versions for the other PDL datatypes, with postfix _S, _U, _L, _N, _Q, _F, and _D. Any module using this must ensure that PDL::Ufunc is loaded.

PDL->qsort_ind_B( PDL_Byte *xx, PDL_Indx *ix, PDL_Indx a, PDL_Indx b )

As for PDL->qsort_B, but this time sorting the indices rather than the data.

The routine med2d in Lib/Image2D/image2d.pd shows how such routines are used.

MAKEFILES FOR PP FILES

If you are going to generate a package from your PP file (typical file extensions are .pd or .pp for the files containing PP code) it is easiest and safest to leave generation of the appropriate commands to the Makefile. In the following we will outline the typical format of a Perl Makefile to automatically build and install your package from a description in a PP file. Most of the rules to build the xs, pm and other required files from the PP file are already predefined in the PDL::Core::Dev package. We just have to tell MakeMaker to use it.

In most cases you can define your Makefile like

  # Makefile.PL for a package defined by PP code.

  use PDL::Core::Dev;            # Pick up development utilities
  use ExtUtils::MakeMaker;

  $package = ["mylib.pd",Mylib,PDL::Lib::Mylib];
  %hash = pdlpp_stdargs($package);
  $hash{OBJECT} .= ' additional_Ccode$(OBJ_EXT) ';
  $hash{clean}->{FILES} .= ' todelete_Ccode$(OBJ_EXT) ';
  $hash{'VERSION_FROM'} = 'mylib.pd';
  WriteMakefile(%hash);

  sub MY::postamble { pdlpp_postamble($package); }

Here, the list in $package is: first: PP source file name, then the prefix for the produced files and finally the whole package name. You can modify the hash in whatever way you like but it would be reasonable to stay within some limits so that your package will continue to work with later versions of PDL.

If you don't want to use prepackaged arguments, here is a generic Makefile.PL that you can adapt for your own needs:

  # Makefile.PL for a package defined by PP code.

  use PDL::Core::Dev;            # Pick up development utilities
  use ExtUtils::MakeMaker;

  WriteMakefile(
   'NAME'       => 'PDL::Lib::Mylib',
   'VERSION_FROM'       => 'mylib.pd',
   'TYPEMAPS'     => [&PDL_TYPEMAP()],
   'OBJECT'       => 'mylib$(OBJ_EXT) additional_Ccode$(OBJ_EXT)',
   'PM'         => { 'Mylib.pm'            => '$(INST_LIBDIR)/Mylib.pm'},
   'INC'          => &PDL_INCLUDE(), # add include dirs as required by your lib
   'LIBS'         => [''],   # add link directives as necessary
   'clean'        => {'FILES'  =>
                          'Mylib.pm Mylib.xs Mylib$(OBJ_EXT)
                          additional_Ccode$(OBJ_EXT)'},
  );

  # Add genpp rule; this will invoke PDL::PP on our PP file
  # the argument is an array reference where the array has three string elements:
  #   arg1: name of the source file that contains the PP code
  #   arg2: basename of the xs and pm files to be generated
  #   arg3: name of the package that is to be generated
  sub MY::postamble { pdlpp_postamble(["mylib.pd",Mylib,PDL::Lib::Mylib]); }

To make life even easier PDL::Core::Dev defines the function pdlpp_stdargs that returns a hash with default values that can be passed (either directly or after appropriate modification) to a call to WriteMakefile. Currently, pdlpp_stdargs returns a hash where the keys are filled in as follows:

        (
         'NAME'         => $mod,
         'TYPEMAPS'     => [&PDL_TYPEMAP()],
         'OBJECT'       => "$pref\$(OBJ_EXT)",
         PM     => {"$pref.pm" => "\$(INST_LIBDIR)/$pref.pm"},
         MAN3PODS => {"$src" => "\$(INST_MAN3DIR)/$mod.\$(MAN3EXT)"},
         'INC'          => &PDL_INCLUDE(),
         'LIBS'         => [''],
         'clean'        => {'FILES'  => "$pref.xs $pref.pm $pref\$(OBJ_EXT)"},
        )

Here, $src is the name of the source file with PP code, $pref the prefix for the generated .pm and .xs files and $mod the name of the extension module to generate.

INTERNALS

The internals of the current version consist of a large table which gives the rules according to which things are translated and the subs which implement these rules.

Later on, it would be good to make the table modifiable by the user so that different things may be tried.

[Meta comment: here will hopefully be more in the future; currently, your best bet will be to read the source code :-( or ask on the list (try the latter first) ]

Appendix A: Some keys recognised by PDL::PP

Unless otherwise specified, the arguments are strings. Keys marked with (bad) are only used if bad-value support is compiled into PDL.

Pars

define the signature of your function

OtherPars

arguments which are not pdls. Default: nothing. This is a semi-colon separated list of arguments, e.g., OtherPars=>'int k; double value; char* fd'. See $COMP(x) and also the same entry in Appendix B.

Code

the actual code that implements the functionality; several PP macros and PP functions are recognised in the string value

HandleBad (bad)

If set to 1, the routine is assumed to support bad values and the code in the BadCode key is used if bad values are present; it also sets things up so that the $ISBAD() etc macros can be used. If set to 0, cause the routine to print a warning if any of the input piddles have their bad flag set.

BadCode (bad)

Give the code to be used if bad values may be present in the input piddles. Only used if HandleBad => 1.

GenericTypes

An array reference. The array may contain any subset of the one-character strings `B', `S', `U', `L', `Q', `F' and `D', which specify which types your operation will accept. The meaning of each type is:

 B - signed byte (i.e. signed char)
 S - signed short (two-byte integer)
 U - unsigned short
 L - signed long (four-byte integer, int on 32 bit systems)
 N - signed integer for indexing piddle elements (platform & Perl-dependent size)
 Q - signed long long (eight byte integer)
 F - float
 D - double

This is very useful (and important!) when interfacing an external library. Default: [qw/B S U L N Q F D/]

Inplace

Mark a function as being able to work inplace.

 Inplace => 1          if  Pars => 'a(); [o]b();'
 Inplace => ['a']      if  Pars => 'a(); b(); [o]c();'
 Inplace => ['a','b']  if  Pars => 'a(); b(); [o]c(); [o]d();'

If bad values are being used, care must be taken to ensure the propagation of the badflag when inplace is being used; for instance see the code for replacebad in Basic/Bad/bad.pd.

Doc

Used to specify a documentation string in Pod format. See PDL::Doc for information on PDL documentation conventions. Note: in the special case where the PP 'Doc' string is one line this is implicitly used for the quick reference AND the documentation!

If the Doc field is omitted PP will generate default documentation (after all it knows about the Signature).

If you really want the function NOT to be documented in any way at this point (e.g. for an internal routine, or because you are doing it elsewhere in the code) explicitly specify Doc=>undef.

BadDoc (bad)

Contains the text returned by the badinfo command (in perldl) or the -b switch to the pdldoc shell script. In many cases, you will not need to specify this, since the information can be automatically created by PDL::PP. However, as befits computer-generated text, it's rather stilted; it may be much better to do it yourself!

NoPthread

Optional flag to indicate the PDL function should not use processor threads (i.e. pthreads or POSIX threads) to split up work across multiple CPU cores. This option is typically set to 1 if the underlying PDL function is not threadsafe. If this option isn't present, then the function is assumed to be threadsafe. This option only applies if PDL has been compiled with POSIX threads enabled.

PMCode

PDL functions allow you to pass in a piddle into which you want the output saved. This is handy because you can allocate an output piddle once and reuse it many times; the alternative would be for PDL to create a new piddle each time, which may waste compute cycles or, more likely, RAM. This added flexibility comes at the cost of more complexity: PDL::PP has to write functions that are smart enough to count the arguments passed to it and create new piddles on the fly, but only if you want them.

PDL::PP is smart enough to do that, but there are restrictions on argument order and the like. If you want a more flexible function, you can write your own Perl-side wrapper and specify it in the PMCode key. The string that you supply must (should) define a Perl function with a name that matches what you gave to pp_def in the first place. When you wish to eventually invoke the PP-generated function, you will need to supply all piddles in the exact order specified in the signature: output piddles are not optional, and the PP-generated function will not return anything. The obfuscated name that you will call is _<funcname>_int.

I believe this documentation needs further clarification, but this will have to do. :-(

PMFunc

When pp_def generates functions, it typically defines them in the PDL package. Then, in the .pm file that it generates for your module, it typically adds a line that essentially copies that function into your current package's symbol table with code that looks like this:

 *func_name = \&PDL::func_name;

It's a little bit smarter than that (it knows when to wrap that sort of thing in a BEGIN block, for example, and if you specified something different for pp_bless), but that's the gist of it. If you don't care to import the function into your current package's symbol table, you can specify

 PMFunc => '',

PMFunc has no other side-effects, so you could use it to insert arbitrary Perl code into your module if you like. However, you should use pp_addpm if you want to add Perl code to your module.

Appendix B: PP macros and functions

Macros

Macros labeled by (bad) are only used if bad-value support is compiled into PDL.

$variablename_from_sig()

access a pdl (by its name) that was specified in the signature

$COMP(x)

access a value in the private data structure of this transformation (mainly used to use an argument that is specified in the OtherPars section)

$SIZE(n)

replaced at runtime by the actual size of a named dimension (as specified in the signature)

$GENERIC()

replaced by the C type that is equal to the runtime type of the operation

$P(a)

a pointer access to the PDL named a in the signature. Useful for interfacing to C functions

$PP(a)

a physical pointer access to pdl a; mainly for internal use

$TXXX(Alternative,Alternative)

expansion alternatives according to runtime type of operation, where XXX is some string that is matched by /[BSULNQFD+]/.

$PDL(a)

return a pointer to the pdl data structure (pdl *) of piddle a

$ISBAD(a()) (bad)

returns true if the value stored in a() equals the bad value for this piddle. Requires HandleBad being set to 1.

$ISGOOD(a()) (bad)

returns true if the value stored in a() does not equal the bad value for this piddle. Requires HandleBad being set to 1.

$SETBAD(a()) (bad)

Sets a() to equal the bad value for this piddle. Requires HandleBad being set to 1.

functions

loop(DIMS) %{ ... %}

loop over named dimensions; limits are generated automatically by PP

threadloop %{ ... %}

enclose following code in a thread loop

types(TYPES) %{ ... %}

execute following code if type of operation is any of TYPES

Appendix C: Functions imported by PDL::PP

A number of functions are imported when you use PDL::PP. These include functions that control the generated C or XS code, functions that control the generated Perl code, and functions that manipulate the packages and symbol tables into which the code is created.

Generating C and XS Code

PDL::PP's main purpose is to make it easy for you to wrap the threading engine around your own C code, but you can do some other things, too.

pp_def

Used to wrap the threading engine around your C code. Virtually all of this document discusses the use of pp_def.

pp_done

Indicates you are done with PDL::PP and that it should generate its .xs and .pm files based upon the other pp_* functions that you have called. This function takes no arguments.

pp_addxs

This lets you add XS code to your .xs file. This is useful if you want to create Perl-accessible functions that invoke C code but cannot or should not invoke the threading engine. XS is the standard means by which you wrap Perl-accessible C code. You can learn more at perlxs.

pp_add_boot

This function adds whatever string you pass to the XS BOOT section. The BOOT section is C code that gets called by Perl when your module is loaded and is useful for automatic initialization. You can learn more about XS and the BOOT section at perlxs.

pp_addhdr

Adds pure-C code to your XS file. XS files are structured such that pure C code must come before XS specifications. This allows you to specify such C code.

pp_boundscheck

PDL normally checks the bounds of your accesses before making them. You can turn that on or off at runtime by setting MyPackage::set_boundscheck. This function allows you to remove that runtime flexibility and never do bounds checking. It also returns the current boundschecking status if called without any argumens.

NOTE: I have not found anything about bounds checking in other documentation. That needs to be addressed.

Generating Perl Code

Many functions imported when you use PDL::PP allow you to modify the contents of the generated .pm file. In addition to pp_def and pp_done, the role of these functions is primarily to add code to various parts of your generated .pm file.

pp_addpm

Adds Perl code to the generated .pm file. PDL::PP actually keeps track of three different sections of generated code: the Top, the Middle, and the Bottom. You can add Perl code to the Middle section using the one-argument form, where the argument is the Perl code you want to supply. In the two-argument form, the first argument is an anonymous hash with only one key that specifies where to put the second argument, which is the string that you want to add to the .pm file. The hash is one of these three:

 {At => 'Top'}
 {At => 'Middle'}
 {At => 'Bot'}

For example:

 pp_addpm({At => 'Bot'}, <<POD);
 
 =head1 Some documentation
 
 I know I'm typing this in the middle of my file, but it'll go at
 the bottom.
 
 =cut
 
 POD

Warning: If, in the middle of your .pd file, you put documentation meant for the bottom of your pod, you will thoroughly confuse CPAN. On the other hand, if in the middle of your .pd file, you add some Perl code destined for the bottom or top of your .pm file, you only have yourself to confuse. :-)

pp_beginwrap

Adds BEGIN-block wrapping. Certain declarations can be wrapped in BEGIN blocks, though the default behavior is to have no such wrapping.

pp_addbegin

Sets code to be added to the top of your .pm file, even above code that you specify with pp_addpm({At => 'Top'}, ...). Unlike pp_addpm, calling this overwrites whatever was there before. Generally, you probably shouldn't use it.

Tracking Line Numbers

When you get compile errors, either from your C-like code or your Perl code, it can help to make those errors back to the line numbers in the source file at which the error occurred.

pp_line_numbers

Takes a line number and a (usually long) string of code. The line number should indicate the line at which the quote begins. This is usually Perl's __LINE__ literal, unless you are using heredocs, in which case it is __LINE__ + 1. The returned string has #line directives interspersed to help the compiler report errors on the proper line.

Modifying the Symbol Table and Export Behavior

PDL::PP usually exports all functions generated using pp_def, and usually installs them into the PDL symbol table. However, you can modify this behavior with these functions.

pp_bless

Sets the package (symbol table) to which the XS code is added. The default is PDL, which is generally what you want. If you use the default blessing and you create a function myfunc, then you can do the following:

 $piddle->myfunc(<args>);
 PDL::myfunc($piddle, <args>);

On the other hand, if you bless your functions into another package, you cannot invoke them as PDL methods, and must invoke them as:

 MyPackage::myfunc($piddle, <args>);

Of course, you could always use the PMFunc key to add your function to the PDL symbol table, but why do that?

pp_add_isa

Adds to the list of modules from which your module inherits. The default list is

 qw(PDL::Exporter DynaLoader)
pp_core_importlist

At the top of your generated .pm file is a line that looks like this:

 use PDL::Core;

You can modify that by specifying a string to pp_core_importlist. For example,

 pp_core_importlist('::Blarg');

will result in

 use PDL::Core::Blarg;

You can use this, for example, to add a list of symbols to import from PDL::Core. For example:

 pp_core_importlist(" ':Internal'");

will lead to the following use statement:

 use PDL::Core ':Internal';
pp_setversion

Sets your module's version. The version must be consistent between the .xs and the .pm file, and is used to ensure that your Perl's libraries do not suffer from version skew.

pp_add_exported

Adds to the export list whatever names you give it. Functions created using pp_def are automatically added to the list. This function is useful if you define any Perl functions using pp_addpm or pp_addxs that you want exported as well.

pp_export_nothing

This resets the list of exported symbols to nothing. This is probably better called pp_export_clear, since you can add exported symbols after calling pp_export_nothing. When called just before calling pp_done, this ensures that your module does not export anything, for example, if you only want programmers to use your functions as methods.

SEE ALSO

PDL

For the concepts of threading and slicing check PDL::Indexing.

PDL::Internals

PDL::BadValues for information on bad values

perlxs, perlxstut

CURRENTLY UNDOCUMENTED

Almost everything having to do with "Slice operation". This includes much of the following (each entry is followed by a guess/description of where it is used or defined):

MACROS

$CDIM()

$CHILD() PDL::PP::Rule::Substitute::Usual

$CHILD_P() PDL::PP::Rule::Substitute::Usual

$CHILD_PTR() PDL::PP::Rule::Substitute::Usual

$COPYDIMS()

$COPYINDS()

$CROAK() PDL::PP::Rule::Substitute::dosubst_private()

$DOCOMPDIMS() Used in slices.pd, defined where?

$DOPRIVDIMS() Used in slices.pd, defined where? Code comes from PDL::PP::CType::get_malloc, which is called by PDL::PP::CType::get_copy, which is called by PDL::PP::CopyOtherPars, PDL::PP::NT2Copies__, and PDL::PP::make_incsize_copy. But none of those three at first glance seem to have anything to do with $DOPRIVDIMS

$EQUIVCPOFFS()

$EQUIVCPTRUNC()

$PARENT() PDL::PP::Rule::Substitute::Usual

$PARENT_P() PDL::PP::Rule::Substitute::Usual

$PARENT_PTR() PDL::PP::Rule::Substitute::Usual

$PDIM()

$PRIV() PDL::PP::Rule::Substitute::dosubst_private()

$RESIZE()

$SETDELTATHREADIDS() PDL::PP::Rule::MakeComp

$SETDIMS() PDL::PP::Rule::MakeComp

$SETNDIMS() PDL::PP::Rule::MakeComp

$SETREVERSIBLE() PDL::PP::Rule::Substitute::dosubst_private()

Keys

AffinePriv

BackCode

BadBackCode

CallCopy

Comp (related to $COMP()?)

DefaultFlow

EquivCDimExpr

EquivCPOffsCode

EquivDimCheck

EquivPDimExpr

FTypes (see comment in this POD's source file between NoPthread and PMCode.)

GlobalNew

Identity

MakeComp

NoPdlThread

P2Child

ParentInds

Priv

ReadDataFuncName

RedoDims (related to RedoDimsCode ?)

Reversible

WriteBckDataFuncName

XCHGOnly

BUGS

Although PDL::PP is quite flexible and thoroughly used, there are surely bugs. First amongst them: this documentation needs a thorough revision.

AUTHOR

Copyright(C) 1997 Tuomas J. Lukka (lukka@fas.harvard.edu), Karl Glaazebrook (kgb@aaocbn1.aao.GOV.AU) and Christian Soeller (c.soeller@auckland.ac.nz). All rights reserved. Documentation updates Copyright(C) 2011 David Mertens (dcmertens.perl@gmail.com). This documentation is licensed under the same terms as Perl itself.