exiftool - Read and write meta information in files
exiftool [OPTIONS] [-TAG...] [--TAG...] FILE...
exiftool [OPTIONS] -TAG[+-<]=[VALUE]... FILE...
exiftool [OPTIONS] -TagsFromFile SRCFILE [-SRCTAG[>DSTTAG]...] FILE...
exiftool [ -ver | -list[w|f|g[NUM]|d] ]
For specific examples, see the EXAMPLES sections below.
A command-line interface to Image::ExifTool, used for reading and writing meta information in image, audio and video files. FILE is a source file name, directory name, or - for the standard input. Information is read from the source file and output in readable form to the console (or written to an output text file with the -w option).
-
To write or copy information, new values are specified with the -TAG=[VALUE] syntax or the -TagsFromFile option. This causes FILE to be rewritten, and by default the original file is preserved with _original appended to the file name. (Be sure to verify that the new file is OK before erasing the original.)
_original
Below is a list of file types and meta information formats currently supported by ExifTool (r = read, w = write, c = create):
File Types | Meta Information --------------------------------------- | -------------------- ACR r M4A r PSD r/w | EXIF r/w/c AI r MIE r/w/c QTIF r | GPS r/w/c AIFF r MIFF r RA r | IPTC r/w/c APE r MNG r/w RAF r | XMP r/w/c ARW r MOS r/w RAM r | MakerNotes r/w/c ASF r MOV r RAW r | Photoshop IRB r/w/c AVI r MP3 r RIFF r | ICC Profile r/w/c BMP r MP4 r RM r | MIE r/w/c CR2 r/w MPC r SR2 r | JFIF r/w/c CRW r/w MPG r SRF r | CIFF r/w DCM r MRW r/w SWF r | AFCP r/w DNG r/w NEF r/w THM r/w | DICOM r DOC r OGG r TIFF r/w | FlashPix r EPS r/w ORF r/w VRD r/w | GeoTIFF r ERF r/w PBM r/w WAV r | PrintIM r FLAC r PDF r WDP r/w | ID3 r FPX r PEF r/w WMA r | Kodak Meta r GIF r/w PGM r/w WMV r | Ricoh RMETA r HTML r PICT r X3F r | Picture Info r ICC r/w/c PNG r/w XLS r | Adobe APP14 r JNG r/w PPM r/w XMP r/w/c | APE r JP2 r PPT r | Vorbis r JPEG r/w PS r/w | (and more)
Note: If FILE is a directory name, then only file types with recognized extensions are processed when reading, and only writable types are written. However, the -ext option may be used to force processing of files with any extension.
Case is not significant for any command-line option (including tag and group names), except for single-character options if the corresponding upper case option is defined. Multiple options may NOT be combined into a single argument, because that would be interpreted as a tag name.
Extract information for specified tag (ie. -CreateDate). See Image::ExifTool::TagNames for documentation on available tag names. A tag name may include a leading group name separated by a colon (ie. -XMP:Creator). Any family 0 or 1 group name may be used, and the group name may be prefixed by a digit to specify family number (ie. -1IPTC:Keywords). Use the -listg or -listg1 option to list valid family 0 or 1 group names.
-CreateDate
-XMP:Creator
-1IPTC:Keywords
A special tag name of All may be used to indicate all meta information. This is particularly useful when a group name is specified to extract all information in a group. (* is a synonym for All, but must be quoted if used on the command line to prevent shell globbing.)
All
*
If no tags are specified, all available information is extracted.
Exclude specified tag from extracted information. Same as the -x option. May also be used following a -TagsFromFile option to exclude tags from being copied.
Write a new value for the specified tag (ie. -comment=wow), or delete the tag if no VALUE is given (ie. -comment=). += and -= are used to add or remove entries from a list, or to shift date/time values (see Image::ExifTool::Shift.pl for details).
-comment=wow
-comment=
+=
-=
If a group name is not specified for TAG, then the information is written to the preferred group, which is the first group in the following list where TAG is valid: 1) EXIF, 2) GPS, 3) IPTC, 4) XMP, 5) MakerNotes.
The special All tag may be used in this syntax only if a VALUE is NOT given. This causes all meta information to be deleted (or all information in a group if -GROUP:All= is used). Note that not all groups are deletable. Also, within an image some groups may be contained within others, and these groups are removed if the super group is deleted. Below are lists of these group dependencies:
-GROUP:All=
JPEG Image: - Deleting EXIF or IFD0 also deletes ExifIFD, GlobParamIFD, GPS, IFD1, InteropIFD, MakerNotes, PrintIM and SubIFD. - Deleting ExifIFD also deletes InteropIFD and MakerNotes. - Deleting Photoshop also deletes IPTC. TIFF Image: - Deleting EXIF only removes ExifIFD which also deletes InteropIFD and MakerNotes.
Set the value of a tag from the contents of file DATFILE. The file name may also be given by a FMT string where %d, %f and %e represent the directory, file name and extension of the original FILE (see the -w option for more details). Note that quotes are required around this argument to prevent shell redirection since it contains a < symbol.
<
Read command-line arguments from the specified file. The file contains one argument per line. Blank lines and lines beginning with # and are ignored. ARGFILE may exist relative to either the current directory or the exiftool directory unless an absolute pathname is given.
#
Allow duplicate tag names in the output. Without this option, duplicates are suppressed.
Output requested data in binary format. Mainly used for extracting embedded images. Suppresses output of tag names and descriptions.
Set the print format for GPS coordinates. FMT uses the same syntax as the printf format string. The specifiers correspond to degrees, minutes and seconds in that order, but minutes and seconds are optional. For example, the following table gives the output for the same coordinate using various formats:
printf
FMT Output ------------------- ------------------ "%d deg %d' %.2f"\" 54 deg 59' 22.80" (the default) "%d deg %.4f min" 54 deg 59.3800 min "%.6f degrees" 54.989667 degrees
Set the format for date/time tag values. Consult strftime man page for FMT syntax. The default format is equivalent to "%Y:%m:%d %H:%M:%S". This option has no effect on date-only or time-only tags.
strftime
Show tag ID number in Decimal.
Print existing tags only -- don't calculate composite tags.
Escape characters in output values for HTML. Implied with the -h option.
Process only files with the specified extension, or use --ext to exclude files. There may be multiple -ext and --ext options. Extensions may begin with a leading '.', and case is not significant. For example:
exiftool -ext .JPG * # process only JPG files exiftool --ext crw --ext dng * # process all but CRW and DNG exiftool --ext . * # ignore if no extension
Force printing of tags even if their values are not found.
Fix the base for maker notes offsets. A common problem with some image editors is that offsets in the maker notes are not adjusted properly when the file is modified. This may cause the wrong values to be extracted for some maker note entries when reading the edited file. This option allows an integer OFFSET to be specified for adjusting the maker notes base offset. If no OFFSET is given, ExifTool takes its best guess at the correct base.
Increase speed of extracting information from JPEG images. With this option, ExifTool will not scan to the end of a JPEG image to check for an AFCP or PreviewImage trailer. The speed benefits are small when reading images directly from disk, but can be substantial if piping images through a network connection.
Organize output by tag group. NUM specifies the group family number, and may be 0 (general location), 1 (specific location) or 2 (category). If not specified, -g0 is assumed. Use the -listg option to list all group names for a specified family.
Same as -g but print Group name for each tag.
Use HTML formatting for output. Implies -E option.
Show tag ID number in Hexadecimal.
Generate a dynamic web page containing a hex dump of the EXIF information. This can be a very powerful tool for low-level analysis of EXIF information. The -htmlDump option is also invoked if the -v and -h options are used together. The verbose level controls the maximum length of the blocks dumped. An OFFSET may be given to specify the base for displayed offsets. If not provided, the EXIF/TIFF base offset is used. Use -htmlDump0 for absolute offsets. Currently only EXIF and TIFF information is dumped.
Ignore specified directory name. May be multiple -i options.
Specify a condition to be evaluated before processing each FILE. EXPR is a Perl-like expression containing tag names prefixed by $ symbols. It is evaluated with the tags from each FILE in turn, and processing proceeds only if the expression returns true. Unlike Perl variable names, tag names are not case sensitive and may contain a hyphen or a leading group name separated by a colon. When multiple -if options are used, all conditions must be satisfied to process the file. Below are a few examples:
$
# extract shutterspeed from all Canon images in a directory exiftool -shutterspeed -if '$make eq "Canon"' dir # add one hour to all images created on or after Apr. 2, 2006 exiftool -alldates+=1 -if '$CreateDate ge "2006:04:02"' dir # set EXIF ISO value if possible, unless it is set already exiftool '-exif:iso<iso' -if 'not $exif:iso' dir
Pause with the message -- press any key -- before terminating. This option is used to prevent the command window from closing when run as a Windows drag and drop application.
-- press any key --
Use long 2-line Canon-style output format.
Convert 16-bit Unicode characters in output to Windows Latin1 (cp1252) instead of the default UTF-8.
Print a list of all valid tag names (-list), all writable tag names (-listw), all recognized file extensions (-listf), all tag groups [in a specified family] (-listg[NUM]), or all deletable tag groups (-listd). The -list and -listw options may be followed by an additional argument of the form -GROUP:All to list all tags in a specific group. With -listg, NUM may be given to specify the group family, otherwise family 0 is assumed. For example:
-GROUP:All
-list # list all tag names -list -EXIF:All # list all EXIF tags -listw -XMP-dc:All # list all writable XMP-dc tags -listf # list all recognized file extensions -listg1 # list all groups in family 1 -listd # list all deletable groups
Ignore minor errors. Allows writing if some minor errors occur, or extraction of embedded images that aren't in standard JPG format.
Read and write values as numbers instead of words. This option disables the print conversion that is applied when extracting values to make them more readable, and the inverse print conversion when writing. For example:
> exiftool -Orientation -S a.jpg Orientation: Rotate 90 CW > exiftool -Orientation -S -n a.jpg Orientation: 6
and the following two writing commands have the same effect
> exiftool -Orientation='Rotate 90 CW' a.jpg > exiftool -Orientation=6 -n a.jpg
Set the output file or directory name when writing information. (Without this option, the original file is renamed to FILE_original and output is sent to FILE.) The output file name may also be specified using a FMT string in which %d, %f and %e represent the directory, file name and extension of FILE. Also, %c may be used to add a copy number. See the -w option for FMT string examples.
FILE_original
The output file is taken to be a directory name if it already exists as a directory or if the name ends with '/'. Output directories are created if necessary. Existing files will not be overwritten. Combining the -overwrite_original option with -o causes the original source file to be erased after the output file is successfully written.
A special feature of this option allows it to be used to create certain types of files from scratch. Currently, this can only be done with XMP and ICC/ICM files. The file is created from a combination of information in FILE and tag values assigned on the command line. This is done by specifying a file extension of '.XMP', '.ICC' or '.ICM' for OUTFILE. The output file may be created even if no FILE is specified, provided some appropriate tag values are specified on the command line.
Overwrite the original FILE (instead of preserving it by adding _original to the file name) when writing information to an image. Caution: This option should only be used if you already have separate backup copies of your image files.
Similar to the -overwrite_original option except that an extra step is added to allow the original file attributes to be preserved. On a Macintosh for example, this preserves the original file type, creator and icon. The extra step results in slower performance, so the -overwrite_original option should be used instead unless necessary.
Print output in the format specified by the given file or expression (and ignore other format options). Tag names in the format file begin with a $ symbol and may contain an optional group name. Case is not significant. Braces {} may be used around the tag name to separate it from subsequent text. Use $$ to represent a $ symbol. In the file, lines beginning with # are ignored. For example, this format file:
{}
$$
# this is a comment line File $FileName was created on $DateTimeOriginal (f/$Aperture, ${ShutterSpeed}s, ISO $EXIF:ISO)
produces output like this:
File test.jpg was created on 2003:10:31 15:44:19 (f/5.6, 1/60s, ISO 100)
If a tag does not exist, the output value is set to '-' if the -f option is used. Otherwise a minor warning is issued and the line with the missing tag is not printed. However, if the -m option is used, minor warnings are ignored and the line is printed with an empty tag value.
Preserve date/time of original file when writing.
Quiet processing. One -q suppresses normal informational messages, and a second -q suppresses warnings as well. Error messages can not be suppressed, although minor errors may be downgraded to warnings with the -m option.
Recursively scan subdirectories. Only meaningful if FILE is a directory name.
Print tag names instead of descriptions. This is the short output format. Add up to 3 -s options for even shorter formats. Also effective when combined with -t or -h options.
Very short format. The same as two -s options. Extra spaces used to column-align values are not printed.
Output a tab-delimited list of description/values (useful for database import). May be combined with -s to print tag names instead of descriptions, or -S to print tag values only, tab-delimited on a single line.
Copy tag values from SRCFILE to FILE. Tag names on the command line after this option specify the tags to be copied, or excluded from the copy. If no tags are specified, then all tags from the source file are copied. More than one -TagsFromFile option may be used to copy tags from multiple files.
By default, this option will commute information between same-named tags in different groups and write each tag to the preferred group. This allows information to be automatically translated when copying between images of different formats. However, if a group name is specified for a tag then the information is written to the original group (unless redirected to another group, see below). This works even if All is used as a group name, so -All:All is used to specify that all information be copied to the same group in the destination file.
-All:All
SRCFILE may be the same as FILE to move information around within a file. In this case, @ may be used to represent the source file (ie. -TagsFromFile @), permitting this feature to be used for batch processing multiple files (see note 3 below). Specified tags are then copied from each file in turn as it is rewritten. For advanced batch use, the source file name may also be specified using a FMT string in which %d, %f and %e represent the directory, file name and extension of FILE. See -w option for FMT string examples.
@
-TagsFromFile @
A powerful redirection feature allows a destination tag to be specified for each extracted tag. With this feature, information may be written to a tag with a different name or group. This is done using "'-SRCTAG>DSTTAG'" on the command line after -TagsFromFile ("'-DSTTAG<SRCTAG'" also works). Note that this argument must be quoted to prevent shell redirection, and there is no = sign as when setting new values. Both source and destination tags may be prefixed by a group name, and All or * may be used as a tag or group name. If no destination group is specified, the information is written to the preferred group. As a convenience, -TagsFromFile @ is assumed for any redirected tags which are specified without a prior -TagsFromFile option. Copied tags may also be added or deleted from a list with arguments of the form "'-SRCTAG+>DSTTAG'" or "'-SRCTAG->DSTTAG'".
=
An extension of the redirection feature allows expressions involving tag names to be used on the right hand side of the < symbol with the syntax "'-DSTTAG<EXPR'", where tag names in EXPR are prefixed with a $ symbol. See the -p option for more details about this syntax. Expressions starting with a = sign must insert a single space after the < to avoid confusion with the <= syntax which would otherwise attempt to set the tag value from the contents of a file. A single space at the start of an expression is removed if it exists, but all other whitespace is preserved.
<=
See "COPYING EXAMPLES" for examples using -TagsFromFile.
Notes:
1) Be aware of the difference between excluding a tag from being copied (--TAG), and deleting a tag (-TAG=). Excluding a tag prevents it from being copied to the destination image, but deleting will remove a pre-existing tag from the image.
2) The maker note information is copied as a block, so it isn't affected like other information by subsequent tag assignments on the command line. Also, since the PreviewImage referenced from the maker notes may be rather large, it is not copied, and must be transferred separately if desired.
3) When performing complex batch processing, it is important to note that the order of operations is different for tags copied in batch mode. In general, tags are copied from batch-mode files after all other command-line arguments have been applied. (The exception is that a group delete is always performed last if there are no subsequent tag assignments on the command line.) For example, the following two commands are not equivalent:
# (not batch mode): Sets xmp:title to 'NEW' exiftool -tagsfromfile a.jpg -xmp:title -xmp:title=NEW a.jpg # (batch mode): Preserves original title if it exists exiftool -tagsfromfile @ -xmp:title -xmp:title=NEW a.jpg
Extract values of unknown tags. Add another -u to also extract unknown information from binary data blocks.
Extract values of unknown tags as well as unknown information from binary data blocks. This is the same as two -u options.
Print verbose messages. NUM specifies the level of verbosity in the range 0-5, with higher numbers being more verbose. If NUM is not given, then each -v option increases the level of verbosity by 1. This option suppresses normal console output unless specific tags are being extracted. -v0 is used when writing to print only the processed file names.
Print version number and exit.
Write console output to a file with name ending in EXT for each source file. The output file name is obtained by replacing the source file extension (including the '.') with the specified extension (and a '.' is added to the start of EXT if it didn't contain one). Alternatively, a FMT string may be used to give more control over the output file name and directory. In the format string, %d, %f and %e represent the directory, filename and extension of the source file, and %c represents a copy number which is automatically incremented if the file already exists. %d includes the trailing '/' if necessary, but %e does not include the leading '.'. For example:
-w %d%f.txt # same effect as "-w txt" -w dir/%f_%e.out # write files to "dir" as "FILE_EXT.out" -w dir2/%d%f.txt # write to "dir2", keeping dir structure -w a%c.txt # write to "a.txt" or "a1.txt" or "a2.txt"...
Existing files will not be overwritten, and output directories are created automatically if necessary.
Advanced feature: A substring of the original file name, directory or extension may be taken by specifying a field width immediately following the '%' character. If the width is negative, the substring is taken from the end. The substring position (characters to ignore at the start or end of the string) may be given by a second optional value after a decimal point. For example:
Input File Name Format Specifier Output File Name ---------------- ---------------- ---------------- Picture-123.jpg %7f.txt Picture.txt Picture-123.jpg %-.4f.out Picture.out Picture-123.jpg %7f.%-3f Picture.123 Picture-123a.jpg Meta%-3.1f.txt Meta123.txt
For %c, these modifiers have a different effects. If a field width is given, the copy number is padded with zeros to the specified width, and a leading '-' is used to add a dash before the copy number. By default, a copy number of zero is omitted, but this can be changed by adding a decimal point to the modifier. For example:
-w A%-cZ.txt # AZ.txt, A-1Z.txt, A-2Z.txt... -w B%5c.txt # B.txt, B00001.txt, B00002.txt... -w C%.c.txt # C0.txt, C1.txt, C2.txt... -w D%-.c.txt # D-0.txt, D-1.txt, D-2.txt... -w E%-.4c.txt # E-0000.txt, E-0001.txt, E-0002.txt... -w F_%.c.txt # F_0.txt, F_1.txt F_2.txt...
This same FMT syntax is used with the -o and -TagsFromFile options, although %c is only valid for output file names.
Exclude the specified tag. There may be multiple -x options. This has the same effect as --TAG on the command line. May also be used following a -TagsFromFile option to exclude tags from being copied.
When reading, causes information to be extracted from .gz and .bz2 compressed images. (Only one image per archive.) When writing, causes compressed information to be written if supported by the image format. (ie. The PNG format supports compressed text.)
Print all meta information in an image, including duplicate and unknown tags, sorted by group (for family 1).
Print common meta information for all images in dir.
dir
Print ImageSize and ExposureTime tag names and values.
Print standard Canon information from two image files.
Recursively extract common meta information from files in pictures directory, writing text output into files with the same names but with a .txt extension.
pictures
.txt
Print one line of output containing the file name and DateTimeOriginal for each image in directory dir.
Save thumbnail image from image.jpg to a file called thumbnail.jpg.
image.jpg
thumbnail.jpg
Extract preview image from JPG file and write it to preview.jpg.
preview.jpg
Recursively extract JPG image from all Canon CRW files in the current directory, adding _JFR.JPG for the name of the output JPG files.
_JFR.JPG
Print formatted date/time for all JPG files in a directory.
Extract image resolution from EXIF IFD1 information (thumbnail image IFD).
Extract complete XMP data record intact from a.jpg and write it to xmp.out using the special XMP tag (see the Extra tags in Image::ExifTool::TagNames).
a.jpg
xmp.out
XMP
Generate HTML pages from a hex dump of EXIF information in all images from the t/images directory. The output HTML files are written to the tmp directory (which is created if it didn't exist), with names of the form 'FILENAME_EXT.html'.
t/images
tmp
Note that quotes are necessary around arguments which contain certain special characters such as >, < or any white space. These quoting techniques are shell dependent, but the examples below will work for most Unix shells. With the Windows cmd shell however, double quotes should be used around the entire argument (ie. "-Comment=This is a new comment")
>
Write new comment to a JPG image (replaces any existing comment).
Remove comment from all JPG images in the current directory, writing the modified images to a new directory.
Replace existing keyword list with two new keywords (EXIF and editor).
EXIF
editor
Copy a source image to a new file, and add a keyword (word) to the current list of keywords.
word
Delete Credit information from all files in a directory where the Credit value was (xxx).
xxx
Delete all meta information from an image.
Delete all meta information from an image and add a comment back in. (Note that the order is important: -comment='lonely' -all= would also delete the new comment.)
-comment='lonely' -all=
Delete all meta information except JFIF group from an image.
Delete Photoshop meta information from an image (note that the Photoshop information also includes IPTC).
Set the thumbnail image from specified file (Note: The quotes are neccessary to prevent shell redirection).
Recursively write JPEG images with filenames ending in _JFR.JPG to the JpgFromRaw tag of like-named files with extension .CRW in the current directory. (This is the inverse of the -JpgFromRaw command of the "READING EXAMPLES" section above.)
.CRW
-JpgFromRaw
Adjust original date/time of all images in directory dir by subtracting one hour and 30 minutes. (This is equivalent to -DateTimeOriginal-=1.5. See Image::ExifTool::Shift.pl for details.)
-DateTimeOriginal-=1.5
Add 3 hours to the CreateDate and ModifyDate timestamps of two images.
Shift the values of DateTimeOriginal, CreateDate and ModifyDate forward by 1 hour and 30 minutes for all Canon images in a directory. (The AllDates tag is provided as a shortcut for these three tags, allowing them to be accessed via a single tag.)
Write a tag to the XMP group (otherwise in this case the tag would get written to the IPTC group since City exists in both, and IPTC has priority).
City
Delete LightSource tag only if it is unknown with a value of 0.
LightSource
Set WhiteBalance to Tungsten only if it was previously Auto.
WhiteBalance
Tungsten
Auto
Create XMP meta information data files for all images in dir.
Create an XMP data file only from tags defined on the command line.
These examples demonstrate the ability to copy tag values between files.
Copy the values of all writable tags from src.crw to dst.jpg, writing the information to the preferred groups.
src.crw
dst.jpg
Copy the values of all writable tags from src.jpg to dst.jpg, preserving the original tag groups.
src.jpg
Erase all meta information from dst.jpg image, then copy EXIF tags from src.jpg.
Copy meta information a.jpg to an XMP data file. If the XMP data file out.xmp already exists, it will be updated with the new information. Otherwise the XMP data file will be created. Only XMP, ICC and MIE files may be created like this (other file types may be edited but not created). See "WRITING EXAMPLES" above for another technique to generate XMP files.
out.xmp
Copy all meta information from a.jpg to b.jpg, deleting all XMP information and the thumbnail image from the destination.
b.jpg
Copy title from one image to another and set a new author name.
Copy ISO from one image and Comment from another image to a destination image.
Copy only the EXIF information from one image to another, excluding SubIFD tags.
Use the original date from the meta information to set the same file's filesystem modification date for all images in a directory. (Note that -TagsFromFile @ is assumed if no other -TagsFromFile is specified when redirecting information as in this example.)
Copy all possible information from src.jpg and write in XMP format to dst.jpg.
Translate IPTC information to XMP with appropriate tag name conversions, and delete the original IPTC information from an image. This example uses iptc2xmp.args, which is a file included with the ExifTool distribution that contains the required arguments to convert IPTC information to XMP format. Also included with the distribution is xmp2iptc.args, which performs the inverse conversion.
Recursively rewrite all JPG images in dir with information copied from the corresponding CRW images in the same directories.
JPG
CRW
Add camera make to list of keywords.
Set the Comment tag of all images in dir from the values of the EXIF:ISO and ShutterSpeed tags. The resulting comment will be in the form "ISO=100 Exposure=1/60".
By writing the FileName and Directory tags, files are renamed and/or moved to new directories. This can be particularly useful and powerful for organizing files by date when combined with the -d option. New directories are created as necessary, but existing files will not be overwritten. The format codes %d, %f and %e may be used in the new file name to represent the directory, name and extension of the original file, and %c may be used to add a copy number if the file already exists (see the -w option for details). Note that if used within a date format string, an extra '%' must be added to pass these codes through the date/time parser. (And further note that in a Windows batch file, all '%' characters must also be escaped, so in this extreme case a '%%%%f' is necessary to pass a simple '%f' through the two levels of parsing.)
FileName
Directory
Rename old.jpg to new.jpg in directory dir.
old.jpg
new.jpg
Move all files from directory dir into directories named by the original file extensions.
Move all files in dir into a directory hierarchy based on year, month and day of DateTimeOriginal. ie) This command would move the file dir/image.jpg with a DateTimeOriginal of 2005:10:12 16:05:56 to 2005/10/12/image.jpg.
DateTimeOriginal
dir/image.jpg
2005:10:12 16:05:56
2005/10/12/image.jpg
Rename all files in dir by adding FocalLength to the file name.
Rename all images in dir according to the CreateDate date and time, adding a copy number with leading '-' if the file already exists (%-c), and preserving the original file extension (%e). Note the extra '%' necessary to escape the filename codes (%c and %e) in the date format string.
CreateDate
%-c
%e
%c
Both the directory and the filename may be changed together via the FileName tag if the new FileName contains a '/'. The example above recursively renames all images in a directory by adding a CreateDate timestamp to the start of the filename, then moves them into new directories named by date.
Set the filename of all JPG images in the current directory from the CreateDate and FileNumber tags, in the form "20060507_118-1861.jpg".
Extract information from stdin.
Extract information from an embedded thumbnail image.
Add an IPTC keyword in a pipeline, saving output to a new file.
Add a comment to an embedded thumbnail image. (Why anyone would want to do this I don't know, but I've included this as an example to illustrate the flexibility of ExifTool.)
ExifTool does not handle information stored in the resource fork on Macintosh filesystems.
Copyright 2003-2007, Phil Harvey
This is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
Image::ExifTool(3pm), Image::ExifTool::TagNames(3pm), Image::ExifTool::Shortcuts(3pm), Image::ExifTool::Shift.pl
To install Image::ExifTool, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Image::ExifTool
CPAN shell
perl -MCPAN -e shell install Image::ExifTool
For more information on module installation, please visit the detailed CPAN module installation guide.