The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.
 / 
mod_perl-1.99_11
River stage three • 155 direct dependents • 183 total dependents
24 ++
/ mod_perl

NAME

mod_perl 2.0 Server Configuration

Description

This chapter provides an in-depth mod_perl 2.0 configuration details.

mod_perl configuration directives

Similar to mod_perl 1.0, in order to use mod_perl 2.0 a few configuration settings should be added to httpd.conf. They are quite similar to 1.0 settings but some directives were renamed and new directives were added.

Enabling mod_perl

To enable mod_perl built as DSO add to httpd.conf:

  LoadModule perl_module modules/mod_perl.so

This setting specifies the location of the mod_perl module relative to the ServerRoot setting, therefore you should put it somewhere after ServerRoot is specified.

If mod_perl has been statically linked it's automatically enabled.

For Win32 specific details, see the documentation on Win32 configuration.

Accessing the mod_perl 2.0 Modules

In order to prevent from inadvertently loading mod_perl 1.0 modules mod_perl 2.0 Perl modules are installed into dedicated directories under Apache2/. The Apache2 module prepends the locations of the mod_perl 2.0 libraries to @INC, which are the same as the core @INC, but with Apache2/ appended. This module has to be loaded just after mod_perl has been enabled. This can be accomplished with:

  use Apache2 ();

in the startup file. Only if you don't use a startup file you can add:

  PerlModule Apache2

to httpd.conf, due to the order the PerlRequire and PerlModule directives are processed.

Startup File

Next usually a startup file with Perl code is loaded:

  PerlRequire "/home/httpd/httpd-2.0/perl/startup.pl"

It's used to adjust Perl modules search paths in @INC, pre-load commonly used modules, pre-compile constants, etc. Here is a typical startup.pl for mod_perl 2.0:

  file:startup.pl
  ---------------
  use Apache2 ();
  
  use lib qw(/home/httpd/perl);
  
  # enable if the mod_perl 1.0 compatibility is needed
  # use Apache::compat ();
  
  # preload all mp2 modules
  # use ModPerl::MethodLookup;
  # ModPerl::MethodLookup::preload_all_modules();
  
  use ModPerl::Util (); #for CORE::GLOBAL::exit
  
  use Apache::RequestRec ();
  use Apache::RequestIO ();
  use Apache::RequestUtil ();
  
  use Apache::Server ();
  use Apache::ServerUtil ();
  use Apache::Connection ();
  use Apache::Log ();
  
  use APR::Table ();
  
  use ModPerl::Registry ();
  
  use Apache::Const -compile => ':common';
  use APR::Const -compile => ':common';
  
  1;

In this file the Apache2 modules is loaded, so the 2.0 modules will be found. Afterwards @INC in adjusted to include non-standard directories with Perl modules:

  use lib qw(/home/httpd/perl);

If you need to use the backwards compatibility layer load:

  use Apache::compat ();

Next we preload the commonly used mod_perl 2.0 modules and precompile common constants.

Finally as usual the startup.pl file must be terminated with 1;.

Server Configuration Directives

PerlRequire

  META: to be written

PerlModule

  META: to be written

PerlLoadModule

  META: to be written
  discused somewhere in docs::2.0::user::config::custom

PerlSetVar

  META: to be written

PerlAddVar

  META: to be written

PerlSetEnv

  META: to be written

PerlPassEnv

  META: to be written

<Perl> Sections

With <Perl>...</Perl> sections, it is possible to configure your server entirely in Perl.

Please refer to the Apache::PerlSections manpage for more information.

META: a dedicated chapter with examples?

PerlSwitches

Now you can pass any Perl's command line switches in httpd.conf using the PerlSwitches directive. For example to enable warnings and Taint checking add:

  PerlSwitches -wT

As an alternative to using use lib in startup.pl to adjust @INC, now you can use the command line switch -I to do that:

  PerlSwitches -I/home/stas/modperl

You could also use -Mlib=/home/stas/modperl which is the exact equivalent as use lib, but it's broken on certain platforms/version (e.g. Darwin/5.6.0). use lib is removing duplicated entries, whereas -I does not.

SetHandler

mod_perl 2.0 provides two types of SetHandler handlers: modperl and perl-script. The SetHandler directive is only relevant for the response phase handlers.

modperl

Configured as:

  SetHandler modperl

The bare mod_perl handler type, which just calls the Perl*Handler's callback function. If you don't need the features provided by the perl-script handler, with the modperl handler, you can gain even more performance. (This handler isn't available in mod_perl 1.0.)

Unless the Perl*Handler callback, running under the modperl handler, is configured with:

  PerlOptions +SetupEnv

or calls:

  $r->subprocess_env;

in a void context (which has the same effect as PerlOptions +SetupEnv for the handler that called it), only the following environment variables are accessible via %ENV:

  • MOD_PERL (always)

  • PATH and TZ (if you had them defined in the shell or httpd.conf)

Therefore if you don't want to add the overhead of populating %ENV, when you simply want to pass some configuration variables from httpd.conf, consider using PerlSetVar and PerlAddVar instead of PerlSetEnv and PerlPassEnv. In your code you can retrieve the values using the dir_config() method. For example if you set in httpd.conf:

  <Location /print_env2>
      SetHandler modperl
      PerlResponseHandler Apache::VarTest
      PerlSetVar VarTest VarTestValue
  </Location>

this value can be retrieved inside Apache::VarTest::handler() with:

  $r->dir_config('VarTest');

Alternatively use the Apache core directives SetEnv and PassEnv, which always populate r->subprocess_env, but this doesn't happen until the Apache fixups phase, which could be too late for your needs.

perl-script

Configured as:

  SetHandler perl-script

Most mod_perl handlers use the perl-script handler. Among other things it does:

  • PerlOptions +GlobalRequest is in effect unless:

      PerlOptions -GlobalRequest

    is specified.

  • PerlOptions +SetupEnv is in effect unless:

      PerlOptions -SetupEnv

    is specified.

  • STDIN and STDOUT get tied to the request object $r, which makes possible to read from STDIN and print directly to STDOUT via CORE::print(), instead of implicit calls like $r->puts().

  • Several special global Perl variables are saved before the handler is called and restored afterwards (similar to mod_perl 1.0). This includes: %ENV, @INC, $/, STDOUT's $| and END blocks array (PL_endav).

Examples

Let's demonstrate the differences between the modperl and the perl-script core handlers in the following example, which represents a simple mod_perl response handler which prints out the environment variables as seen by it:

  file:MyApache/PrintEnv1.pm
  -----------------------
  package MyApache::PrintEnv1;
  use strict;
  
  use Apache::RequestRec (); # for $r->content_type
  use Apache::RequestIO ();  # for print
  use Apache::Const -compile => ':common';
  
  sub handler {
      my $r = shift;
  
      $r->content_type('text/plain');
      for (sort keys %ENV){
          print "$_ => $ENV{$_}\n";
      }
  
      return Apache::OK;
  }
  
  1;

This is the required configuration:

  PerlModule MyApache::PrintEnv1
  <Location /print_env1>
      SetHandler perl-script
      PerlResponseHandler MyApache::PrintEnv1
  </Location>

Now issue a request to http://localhost/print_env1 and you should see all the environment variables printed out.

Here is the same response handler, adjusted to work with the modperl core handler:

  file:MyApache/PrintEnv2.pm
  ------------------------
  package MyApache::PrintEnv2;
  use strict;
  
  use Apache::RequestRec (); # for $r->content_type
  use Apache::RequestIO ();  # for $r->print
  
  use Apache::Const -compile => ':common';
  
  sub handler {
      my $r = shift;
  
      $r->content_type('text/plain');
      $r->subprocess_env;
      for (sort keys %ENV){
          $r->print("$_ => $ENV{$_}\n");
      }
  
      return Apache::OK;
  }
  
  1;

The configuration now will look as:

  PerlModule MyApache::PrintEnv2
  <Location /print_env2>
      SetHandler modperl
      PerlResponseHandler MyApache::PrintEnv2
  </Location>

MyApache::PrintEnv2 cannot use print() and therefore uses $r->print() to generate a response. Under the modperl core handler %ENV is not populated by default, therefore subprocess_env() is called in a void context. Alternatively we could configure this section to do:

    PerlOptions +SetupEnv

If you issue a request to http://localhost/print_env2, you should see all the environment variables printed out as with http://localhost/print_env1.

PerlOptions

The directive PerlOptions provides fine-grained configuration for what were compile-time only options in the first mod_perl generation. It also provides control over what class of PerlInterpreter is used for a <VirtualHost> or location configured with <Location>, <Directory>, etc.

Options are enabled by prepending + and disabled with -. The options include:

Enable

On by default, can be used to disable mod_perl for a given VirtualHost. For example:

  <VirtualHost ...>
      PerlOptions -Enable
  </VirtualHost>

Clone

Share the parent Perl interpreter, but give the VirtualHost its own interpreter pool. For example should you wish to fine tune interpreter pools for a given virtual host:

  <VirtualHost ...>
      PerlOptions +Clone
      PerlInterpStart 2
      PerlInterpMax 2
  </VirtualHost>

This might be worthwhile in the case where certain hosts have their own sets of large-ish modules, used only in each host. By tuning each host to have its own pool, that host will continue to reuse the Perl allocations in their specific modules.

When cloning a Perl interpreter, to inherit base Perl interpreter's PerlSwitches use:

  <VirtualHost ...>
      ...
      PerlSwitches +inherit
  </VirtualHost>

Parent

Create a new parent Perl interpreter for the given VirtualHost and give it its own interpreter pool (implies the Clone option).

A common problem with mod_perl 1.0 was the shared namespace between all code within the process. Consider two developers using the same server and each wants to run a different version of a module with the same name. This example will create two parent Perl interpreters, one for each <VirtualHost>, each with its own namespace and pointing to a different paths in @INC:

META: is -Mlib portable? (problems with -Mlib on Darwin/5.6.0?)

  <VirtualHost ...>
      ServerName dev1
      PerlOptions +Parent
      PerlSwitches -Mlib=/home/dev1/lib/perl
      PerlModule Apache2
  </VirtualHost>

  <VirtualHost ...>
      ServerName dev2
      PerlOptions +Parent
      PerlSwitches -Mlib=/home/dev2/lib/perl
      PerlModule Apache2
  </VirtualHost>

Remember that +Parent gives you a completely new Perl interpreters pool, so all your modifications to @INC and preloading of the modules should be done again. Consider using PerlOptions +Clone if you want to inherit from the parent Perl interpreter.

Or even for a given location, for something like "dirty" cgi scripts:

  <Location /cgi-bin>
      PerlOptions +Parent
      PerlInterpMaxRequests 1
      PerlInterpStart 1
      PerlInterpMax 1
      PerlResponseHandler ModPerl::Registry
  </Location>

will use a fresh interpreter with its own namespace to handle each request.

Perl*Handler

Disable Perl*Handlers, all compiled-in handlers are enabled by default. The option name is derived from the Perl*Handler name, by stripping the Perl and Handler parts of the word. So PerlLogHandler becomes Log which can be used to disable PerlLogHandler:

  PerlOptions -Log

Suppose one of the hosts does not want to allow users to configure PerlAuthenHandler, PerlAuthzHandler, PerlAccessHandler and <Perl> sections:

  <VirtualHost ...>
      PerlOptions -Authen -Authz -Access -Sections
  </VirtualHost>

Or maybe everything but the response handler:

  <VirtualHost ...>
      PerlOptions None +Response
  </VirtualHost>

AutoLoad

Resolve Perl*Handlers at startup time, which includes loading the modules from disk if not already loaded.

In mod_perl 1.0, configured Perl*Handlers which are not a fully qualified subroutine names are resolved at request time, loading the handler module from disk if needed. In mod_perl 2.0, configured Perl*Handlers are resolved at startup time. By default, modules are not auto-loaded during startup-time resolution. It is possible to enable this feature with:

  PerlOptions +Autoload

Consider this configuration:

  PerlResponseHandler Apache::Magick

In this case, Apache::Magick is the package name, and the subroutine name will default to handler. If the Apache::Magick module is not already loaded, PerlOptions +Autoload will attempt to pull it in at startup time. With this option enabled you don't have to explicitly load the handler modules. For example you don't need to add:

  PerlModule Apache::Magick

in our example.

GlobalRequest

Setup the global request_rec for use with Apache->request. This setting is needed for example if you use CGI.pm to process the incoming request.

This setting is enabled by default for sections configured as:

  <Location ...>
      SetHandler perl-script
      ...
  </Location>

And can be disabled with:

  <Location ...>
      SetHandler perl-script
      PerlOptions -GlobalRequest
      ...
  </Location>

ParseHeaders

Scan output for HTTP headers, same functionality as mod_perl 1.0's PerlSendHeader, but more robust. This option is usually needs to be enabled for registry scripts which send the HTTP header with:

  print "Content-type: text/html\n\n";

MergeHandlers

Turn on merging of Perl*Handler arrays. For example with a setting:

  PerlFixupHandler Apache::FixupA
  
  <Location /inside>
      PerlFixupHandler Apache::FixupB
  </Location>

a request for /inside only runs Apache::FixupB (mod_perl 1.0 behavior). But with this configuration:

  PerlFixupHandler Apache::FixupA
  
  <Location /inside>
      PerlOptions +MergeHandlers
      PerlFixupHandler Apache::FixupB
  </Location>

a request for /inside will run both Apache::FixupA and Apache::FixupB handlers.

SetupEnv

Set up environment variables for each request ala mod_cgi.

When this option is enabled, mod_perl fiddles with the environment to make it appear as if the code is called under the mod_cgi handler. For example, the $ENV{QUERY_STRING} environment variable is initialized with the contents of Apache::args(), and the value returned by Apache::server_hostname() is put into $ENV{SERVER_NAME}.

But %ENV population is expensive. Those who have moved to the Perl Apache API no longer need this extra %ENV population, and can gain by disabling it. A code using the CGI.pm module require PerlOptions +SetupEnv because that module relies on a properly populated CGI environment table.

This option is enabled by default for sections configured as:

  <Location ...>
      SetHandler perl-script
      ...
  </Location>

Since this option adds an overhead to each request, if you don't need this functionality you can turn it off for a certain section:

  <Location ...>
      SetHandler perl-script
      PerlOptions -SetupEnv
      ...
  </Location>

or globally:

  PerlOptions -SetupEnv
  <Location ...>
      ...
  </Location>

and then it'll affect the whole server. It can still be enabled for sections that need this functionality.

When this option is disabled you can still read environment variables set by you. For example when you use the following configuration:

  PerlOptions -SetupEnv
  PerlModule Modperl::Registry
  <Location /perl>
    PerlSetEnv TEST hi
    SetHandler perl-script
    PerlResponseHandler ModPerl::Registry
    Options +ExecCGI
  </Location>

and you issue a request for this script:

  setupenvoff.pl
  --------------
  use Data::Dumper;
  my $r = Apache->request();
  $r->send_http_header('text/plain');
  print Dumper(\%ENV);

you should see something like this:

  $VAR1 = {
            'GATEWAY_INTERFACE' => 'CGI-Perl/1.1',
            'MOD_PERL' => 'mod_perl/2.0.1',
            'PATH' => 'bin:/usr/bin',
            'TEST' => 'hi'
          };

Notice that we have got the value of the environment variable TEST.

Server Life Cycle Handlers Directives

See Server life cycle.

PerlOpenLogsHandler

See PerlOpenLogsHandler.

PerlPostConfigHandler

See PerlPostConfigHandler.

PerlChildInitHandler

See PerlChildInitHandler.

PerlChildExitHandler

See PerlChildExitHandler.

Protocol Handlers Directives

See Protocol handlers.

PerlPreConnectionHandler

See PerlPreConnectionHandler.

PerlProcessConnectionHandler

See PerlProcessConnectionHandler.

Filter Handlers Directives

mod_perl filters are described in the filter handlers tutorial, Apache::Filter and Apache::FilterRec manpages.

The following filter handler configuration directives are available:

PerlInputFilterHandler

See PerlInputFilterHandler.

PerlOutputFilterHandler

See PerlOutputFilterHandler.

PerlSetInputFilter

See PerlSetInputFilter.

PerlSetOutputFilter

See PerlSetInputFilter.

HTTP Protocol Handlers Directives

See HTTP protocol handlers.

PerlPostReadRequestHandler

See PerlPostReadRequestHandler.

PerlTransHandler

See PerlTransHandler.

PerlMapToStorageHandler

See PerlMapToStorageHandler.

PerlInitHandler

See PerlInitHandler.

PerlHeaderParserHandler

See PerlHeaderParserHandler.

PerlAccessHandler

See PerlAccessHandler.

PerlAuthenHandler

See PerlAuthenHandler.

PerlAuthzHandler

See PerlAuthzHandler.

PerlTypeHandler

See PerlTypeHandler.

PerlFixupHandler

See PerlFixupHandler.

PerlResponseHandler

See PerlResponseHandler.

PerlLogHandler

See PerlLogHandler.

PerlCleanupHandler

See PerlCleanupHandler.

Threads Mode Specific Directives

These directives are enabled only in a threaded mod_perl+Apache combo:

PerlInterpStart

The number of interpreters to clone at startup time.

Default value: 3

PerlInterpMax

If all running interpreters are in use, mod_perl will clone new interpreters to handle the request, up until this number of interpreters is reached. when PerlInterpMax is reached, mod_perl will block (via COND_WAIT()) until one becomes available (signaled via COND_SIGNAL()).

Default value: 5

PerlInterpMinSpare

The minimum number of available interpreters this parameter will clone interpreters up to PerlInterpMax, before a request comes in.

Default value: 3

PerlInterpMaxSpare

mod_perl will throttle down the number of interpreters to this number as those in use become available.

Default value: 3

PerlInterpMaxRequests

The maximum number of requests an interpreter should serve, the interpreter is destroyed when the number is reached and replaced with a fresh clone.

Default value: 2000

PerlInterpScope

As mentioned, when a request in a threaded mpm is handled by mod_perl, an interpreter must be pulled from the interpreter pool. The interpreter is then only available to the thread that selected it, until it is released back into the interpreter pool. By default, an interpreter will be held for the lifetime of the request, equivalent to this configuration:

  PerlInterpScope request

For example, if a PerlAccessHandler is configured, an interpreter will be selected before it is run and not released until after the logging phase.

Interpreters will be shared across sub-requests by default, however, it is possible to configure the interpreter scope to be per-sub-request on a per-directory basis:

  PerlInterpScope subrequest

With this configuration, an autoindex generated page, for example, would select an interpreter for each item in the listing that is configured with a Perl*Handler.

It is also possible to configure the scope to be per-handler:

  PerlInterpScope handler

For example if PerlAccessHandler is configured, an interpreter will be selected before running the handler, and put back immediately afterwards, before Apache moves onto the next phase. If a PerlFixupHandler is configured further down the chain, another interpreter will be selected and again put back afterwards, before PerlResponseHandler is run.

For protocol handlers, the interpreter is held for the lifetime of the connection. However, a C protocol module might hook into mod_perl (e.g. mod_ftp) and provide a request_rec record. In this case, the default scope is that of the request. Should a mod_perl handler want to maintain state for the lifetime of an ftp connection, it is possible to do so on a per-virtualhost basis:

  PerlInterpScope connection

Default value: request

Debug Directives

PerlTrace

The PerlTrace is used for tracing the mod_perl execution. This directive is enabled when mod_perl is compiled with the MP_TRACE=1 option.

To enable tracing, add to httpd.conf:

  PerlTrace [level]

where level is either:

  all

which sets maximum logging and debugging levels;

a combination of one or more option letters from the following list:

  a Apache API interaction
  c configuration for directive handlers
  d directive processing
  f filters
  e environment variables
  g Perl runtime interaction
  h handlers
  i interpreter pool management
  m memory allocations
  o I/O
  s Perl sections
  t benchmark-ish timings

When PerlTrace is not specified, the tracing level will be set to the value of the $ENV{MOD_PERL_TRACE} environment variable.

mod_perl Directives Argument Types and Allowed Location

The following table shows where in the configuration files mod_perl configuration directives are allowed to appear, what kind and how many arguments they expect:

General directives:

    Directive                 Arguments  Scope
  --------------------------------------------
  PerlSwitches                 ITERATE    SRV
  PerlRequire                  ITERATE    SRV
  PerlModule                   ITERATE    SRV
  PerlLoadModule               RAW_ARGS   SRV
  PerlOptions                  ITERATE    DIR
  PerlSetVar                   TAKE2      DIR
  PerlAddVar                   ITERATE2   DIR
  PerlSetEnv                   TAKE2      DIR
  PerlPassEnv                  TAKE1      SRV
  <Perl> Sections              RAW_ARGS   SRV
  PerlTrace                    TAKE1      SRV

Handler assignment directives:

    Directive                 Arguments  Scope
  --------------------------------------------
  PerlOpenLogsHandler          ITERATE    SRV
  PerlPostConfigHandler        ITERATE    SRV
  PerlChildInitHandler         ITERATE    SRV
  PerlChildExitHandler         ITERATE    SRV

  PerlPreConnectionHandler     ITERATE    SRV
  PerlProcessConnectionHandler ITERATE    SRV
  
  PerlPostReadRequestHandler   ITERATE    SRV
  PerlTransHandler             ITERATE    SRV
  PerlMapToStorageHandler      ITERATE    SRV
  PerlInitHandler              ITERATE    DIR
  PerlHeaderParserHandler      ITERATE    DIR
  PerlAccessHandler            ITERATE    DIR
  PerlAuthenHandler            ITERATE    DIR
  PerlAuthzHandler             ITERATE    DIR
  PerlTypeHandler              ITERATE    DIR
  PerlFixupHandler             ITERATE    DIR
  PerlResponseHandler          ITERATE    DIR
  PerlLogHandler               ITERATE    DIR
  PerlCleanupHandler           ITERATE    DIR
  
  PerlInputFilterHandler       ITERATE    DIR
  PerlOutputFilterHandler      ITERATE    DIR
  PerlSetInputFilter           ITERATE    DIR
  PerlSetOutputFilter          ITERATE    DIR

Perl Interpreter management directives:

    Directive                 Arguments  Scope
  --------------------------------------------
  PerlInterpStart              TAKE1      SRV
  PerlInterpMax                TAKE1      SRV
  PerlInterpMinSpare           TAKE1      SRV
  PerlInterpMaxSpare           TAKE1      SRV
  PerlInterpMaxRequests        TAKE1      SRV
  PerlInterpScope              TAKE1      DIR

mod_perl 1.0 back-compatibility directives:

    Directive                 Arguments  Scope
  --------------------------------------------
  PerlHandler                   ITERATE   DIR
  PerlSendHeader                FLAG      DIR
  PerlSetupEnv                  FLAG      DIR
  PerlTaintCheck                FLAG      SRV
  PerlWarn                      FLAG      SRV

The Arguments column represents the type of arguments directives accepts, where:

ITERATE

Expects a list of arguments.

ITERATE2

Expects one argument, followed by at least one or more arguments.

TAKE1

Expects one argument only.

TAKE2

Expects two arguments only.

FLAG

One of On or Off (case insensitive).

RAW_ARGS

The function parses the command line by itself.

The Scope column shows the location the directives are allowed to appear in:

SRV

Global configuration and <VirtualHost> (mnemonic: SeRVer). These directives are defined as RSRC_CONF in the source code.

DIR

<Directory>, <Location>, <Files> and all their regular expression variants (mnemonic: DIRectory). These directives can also appear in .htaccess files. These directives are defined as OR_ALL in the source code.

These directives can also appear in the global server configuration and <VirtualHost>.

Apache specifies other allowed location types which are currently not used by the core mod_perl directives and their definition can be found in include/httpd_config.h (hint: search for RSRC_CONF).

Also see Single Phase's Multiple Handlers Behavior.

Server Startup Options Retrieval

Inside httpd.conf one can do conditional configuration based on the define options passed at the server startup. For example:

  <IfDefine PERLDB>
      <Perl>
          use Apache::DB ();
          Apache::DB->init;
      </Perl>
    
      <Location />
          PerlFixupHandler Apache::DB
      </Location>
  </IfDefine>

So only when the server is started as:

  % httpd C<-DPERLDB> ...

The configuration inside IfDefine will have an effect. If you want to have some configuration section to have an effect if a certain define wasn't defined use !, for example here is the opposite of the previous example:

  <IfDefine !PERLDB>
      # ...
  </IfDefine>

If you need to access any of the startup defines in the Perl code you use Apache::exists_config_define. For example in a startup file you can say:

  use Apache::ServerUtil ();
  if (Apache::exists_config_define("PERLDB")) {
      require Apache::DB;
      Apache::DB->init;
  }

For example to check whether the server has been started in a single mode use:

  if (Apache::exists_config_define("ONE_PROCESS")) {
      print "Running in a single mode";
  }

MODPERL2 Define Option

When running under mod_perl 2.0 a special configuration "define" symbol MODPERL2 is enabled internally, as if the server had been started with -DMODPERL2. For example this can be used to write a configuration file which needs to do something different whether it's running under mod_perl 1.0 or 2.0:

  <IfDefine MODPERL2>
      # 2.0 configuration
  </IfDefine>
  <IfDefine !MODPERL2>
      # else
  </IfDefine>

From within Perl code this can be tested with Apache::exists_config_define(), for example:

  if (Apache::exists_config_define("MODPERL2")) {
      # some 2.0 specific code
  }

Perl Interface to the Apache Configuration Tree

For now refer to the Apache::Directive manpage and the test t/response/TestApache/conftree.pm in the mod_perl source distribution.

META: need help to write the tutorial section on this with examples.

Adjusting @INC

You can always adjust contents of @INC before the server starts. There are several ways to do that.

  • startup.pl

    In the startup file you can use the lib pragma like so:

      use lib qw(/home/httpd/project1/lib /tmp/lib);
  use lib qw(/home/httpd/project2/lib);

  • httpd.conf

    In httpd.conf you can use the PerlSwitches directive to pass arguments to perl as you do from the command line, e.g.:

      PerlSwitches -I/home/httpd/project1/lib -I/tmp/lib
  PerlSwitches -I/home/httpd/project2/lib

PERL5LIB and PERLLIB Environment Variables

The effect of the PERL5LIB and PERLLIB environment variables on @INC is described in the perlrun manpage. mod_perl 2.0 doesn't do anything special about them.

It's important to remind that both PERL5LIB and PERLLIB are ignored when the taint mode (PerlSwitches -T) is in effect. Since you want to make sure that your mod_perl server is running under the taint mode, you can't use the PERL5LIB and PERLLIB environment variables.

However there is the perl5lib module on CPAN, which, if loaded, bypasses perl's security and will affect @INC. Use it only if you know what you are doing.

Modifying @INC on a Per-VirtualHost

If Perl used with mod_perl was built with ithreads support one can specify different @INC values for different VirtualHosts, using a combination of PerlOptions +Parent and PerlSwitches. For example:

  <VirtualHost ...>
      ServerName dev1
      PerlOptions +Parent
      PerlSwitches -I/home/dev1/lib/perl
      PerlModule Apache2
  </VirtualHost>

  <VirtualHost ...>
      ServerName dev2
      PerlOptions +Parent
      PerlSwitches -I/home/dev2/lib/perl
      PerlModule Apache2
  </VirtualHost>

General Issues

Maintainers

Maintainer is the person(s) you should contact with updates, corrections and patches.

  • Stas Bekman <stas (at) stason.org>

Authors

  • Doug MacEachern <dougm (at) covalent.net>

  • Stas Bekman <stas (at) stason.org>

Only the major authors are listed above. For contributors see the Changes file.