Tinkerforge::BrickletIndustrialDigitalIn4 - 4 galvanically isolated digital inputs
This constant is used to identify a Industrial Digital In 4 Bricklet.
The get_identity() subroutine and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.
This constant represents the display name of a Industrial Digital In 4 Bricklet.
This constant is used with the register_callback() subroutine to specify the CALLBACK_INTERRUPT callback.
This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.
Creates an object with the unique device ID *uid* and adds it to the IP Connection *ipcon*.
Returns the input value with a bitmask. The bitmask is 16bit long, *true* refers to high and *false* refers to low.
For example: The value 3 or 0b0011 means that pins 0-1 are high and the other pins are low.
If no groups are used (see :func:`Set Group`), the pins correspond to the markings on the Digital In 4 Bricklet.
If groups are used, the pins correspond to the element in the group. Element 1 in the group will get pins 0-3, element 2 pins 4-7, element 3 pins 8-11 and element 4 pins 12-15.
Sets a group of Digital In 4 Bricklets that should work together. You can find Bricklets that can be grouped together with :func:`Get Available For Group`.
The group consists of 4 elements. Element 1 in the group will get pins 0-3, element 2 pins 4-7, element 3 pins 8-11 and element 4 pins 12-15.
Each element can either be one of the ports ('a' to 'd') or 'n' if it should not be used.
For example: If you have two Digital In 4 Bricklets connected to port A and port B respectively, you could call with ``['a', 'b', 'n', 'n']``.
Now the pins on the Digital In 4 on port A are assigned to 0-3 and the pins on the Digital In 4 on port B are assigned to 4-7. It is now possible to call :func:`Get Value` and read out two Bricklets at the same time.
Changing the group configuration resets all edge counter configurations and values.
Returns the group as set by :func:`Set Group`
Returns a bitmask of ports that are available for grouping. For example the value 5 or 0b0101 means: Port A and port C are connected to Bricklets that can be grouped together.
Sets the debounce period of the :cb:`Interrupt` callback in ms.
For example: If you set this value to 100, you will get the interrupt maximal every 100ms. This is necessary if something that bounces is connected to the Digital In 4 Bricklet, such as a button.
The default value is 100.
Returns the debounce period as set by :func:`Set Debounce Period`.
Sets the pins on which an interrupt is activated with a bitmask. Interrupts are triggered on changes of the voltage level of the pin, i.e. changes from high to low and low to high.
For example: An interrupt bitmask of 9 or 0b1001 will enable the interrupt for pins 0 and 3.
The interrupts use the grouping as set by :func:`Set Group`.
The interrupt is delivered with the :cb:`Interrupt` callback.
Returns the interrupt bitmask as set by :func:`Set Interrupt`.
Returns the current value of the edge counter for the selected pin. You can configure the edges that are counted with :func:`Set Edge Count Config`.
If you set the reset counter to *true*, the count is set back to 0 directly after it is read.
.. versionadded:: 2.0.1$nbsp;(Plugin)
Configures the edge counter for the selected pins. A bitmask of 9 or 0b1001 will enable the edge counter for pins 0 and 3.
The edge type parameter configures if rising edges, falling edges or both are counted if the pin is configured for input. Possible edge types are:
* 0 = rising (default) * 1 = falling * 2 = both
The debounce time is given in ms.
Configuring an edge counter resets its value to 0.
If you don't know what any of this means, just leave it at default. The default configuration is very likely OK for you.
Default values: 0 (edge type) and 100ms (debounce time)
Returns the edge type and debounce time for the selected pin as set by :func:`Set Edge Count Config`.
Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.
The position can be 'a', 'b', 'c' or 'd'.
The device identifier numbers can be found :ref:`here <device_identifier>`. |device_identifier_constant|
To install Tinkerforge, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Tinkerforge
CPAN shell
perl -MCPAN -e shell install Tinkerforge
For more information on module installation, please visit the detailed CPAN module installation guide.