NAME
Math::PlanePath::SierpinskiArrowhead  selfsimilar triangular path traversal
SYNOPSIS
use Math::PlanePath::SierpinskiArrowhead;
my $path = Math::PlanePath::SierpinskiArrowhead>new;
my ($x, $y) = $path>n_to_xy (123);
DESCRIPTION
This is an integer version of the Sierpinski arrowhead path. It follows a selfsimilar triangular shape leaving middle triangle gaps.
\
2726 1918 1514 8
\ / \ / \
25 20 1716 13 7
/ \ /
24 21 1112 6
\ / /
2322 10 5
\
5 6 9 4
/ \ /
4 7 8 3
\
3 2 2
\
1 1
/
0 < Y=0
8 7 6 5 4 3 2 1 X=0 1 2 3 4 5 6 7 8
The base figure is the N=0 to N=3 shape. It's repeated up in mirror image as N=3 to N=6 then across as N=6 to N=9. At the next level the same is done with the N=0 to N=9 shape, up as N=9 to N=18 and across as N=18 to N=27, etc.
The X,Y coordinates are on a triangular lattice done in integers by using every second X, per "Triangular Lattice" in Math::PlanePath.
The base pattern is a triangle like
32     .
\ \
C / \ B /
\ D \
/ \ /
.     1
\ /
A /
\ /
/
0
Higher levels go into the triangles A,B,C but the middle triangle D is not traversed. It's hard to see that omitted middle in the initial N=0 to N=27 above. The following is more of the visited points, making it clearer
* * * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * *
* * * * *
* * * * * * *
* * * * *
* * * *
* * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * *
* * * * *
* * * * * * *
* * * * *
* * * *
* * *
* * * * * *
* * * * *
* * * *
* * *
* * *
* * *
* *
*
*
Sierpinski Triangle
The path is related to the Sierpinski triangle or "gasket" by treating each line segment as the side of a little triangle. The N=0 to N=1 segment has a triangle on the left, N=1 to N=2 on the right, and N=2 to N=3 underneath, which are per the A,B,C parts shown above. Notice there's no middle little triangle "D" in the triplets of line segments. In general a segment N to N+1 has its little triangle to the left if N even or to the right if N odd.
This pattern of little triangles is why the N=4 to N=5 looks like it hasn't visited the vertex of the triangular N=0 to N=9  the 4 to 5 segment is standing in for a little triangle to the left of that segment. Similarly N=13 to N=14 and each alternate side midway through replication levels.
There's easier ways to generate the Sierpinski triangle though. One of the simplest is to take X,Y coordinates which have no 1 bit on common, ie. a bitwiseAND,
($x & $y) == 0
which gives the shape in the first quadrant X>=0,Y>=0. The same can be had with the ZOrderCurve
path by plotting all numbers N which have no digit 3 in their base4 representation (see "Power of 2 Values" in Math::PlanePath::ZOrderCurve), since digit 3s in that case are X,Y points with a 1 bit in common.
The attraction of this Arrowhead path is that it makes a connected traversal through the Sierpinski triangle pattern.
Level Sizes
Counting the N=0,1,2,3 part as level 1, each level goes from
Nstart = 0
Nlevel = 3^level
inclusive of the final triangle corner position. For example level 2 is from N=0 to N=3^2=9. Each level doubles in size,
0 <= Y <= 2^level
 2^level <= X <= 2^level
The final Nlevel position is alternately on the right or left,
Xlevel = / 2^level if level even
\  2^level if level odd
The Y axis is crossed, ie. X=0, at N=2,6,18,etc which is is 2/3 through the level, ie. after two replications of the previous level,
Ncross = 2/3 * 3^level
= 2 * 3^(level1)
Align Parameter
An optional align
parameter controls how the points are arranged relative to the Y axis. The default shown above is "triangular". The choices are the same as for the SierpinskiTriangle
path.
"right" means points to the right of the axis, packed next to each other and so using an eighth of the plane.
align => "right"
 
8  2726 1918 1514
  /  / 
7  25 20 1716 13
 /  /
6  24 21 1112
  / /
5  2322 10
 
4  56 9
 /  /
3  4 78
 
2  32
 
1  1
 /
Y=0  0
+
X=0 1 2 3 4 5 6 7
"left" is similar but skewed to the left of the Y axis, ie. into negative X.
align => "left"
\
2726 1918 1514  8
\  \  \ 
25 20 1716 13  7
 \  
24 21 1112  6
\   
2322 10  5
\ 
56 9  4
 \  
4 78  3
\ 
32  2
\ 
1  1
 
0  Y=0
+
8 7 6 5 4 3 2 1 X=0
"diagonal" put rows on diagonals down from the Y axis to the X axis. This uses the whole of the first quadrant (with gaps).
align => "diagonal"
 
8  27
 \
7  26
 
6  2425
 
5  23 2019
 \  \
4  2221 18
 
3  45 17
  \ \
2  3 6 1615
 \  \
1  2 7 1011 14
  \  \ 
Y=0  01 89 1213
+
X=0 1 2 3 4 5 6 7
Sideways
The arrowhead is sometimes drawn on its side, with a base along the X axis. That can be had with a 60 degree rotation (see "Triangular Lattice" in Math::PlanePath),
(3Y+X)/2, (YX)/2 rotate 60
The first point N=1 is then along the X axis at X=2,Y=0. Or to have it diagonally upwards first then apply a mirroring X before rotating
(3YX)/2, (Y+X)/2 mirror X and rotate 60
The plain 60 rotate puts the Nlevel=3^level point on the X axis for even number level, and at the top peak for odd level. With the extra mirroring it's the other way around. If drawing successive levels then the two ways could be alternated to have the endpoint on the X axis each time.
FUNCTIONS
See "FUNCTIONS" in Math::PlanePath for behaviour common to all path classes.
$path = Math::PlanePath::SierpinskiArrowhead>new ()
$path = Math::PlanePath::SierpinskiArrowhead>new (align => $str)

Create and return a new arrowhead path object.
align
is a string, one of the following as described above."triangular" the default "right" "left" "diagonal"
($x,$y) = $path>n_to_xy ($n)

Return the X,Y coordinates of point number
$n
on the path. Points begin at 0 and if$n < 0
then the return is an empty list.If
$n
is not an integer then the return is on a straight line between the integer points.
OEIS
Entries in Sloane's Online Encyclopedia of Integer Sequences related to this path include,
http://oeis.org/A189706 (etc)
A189706 turn 0=left,1=right at odd positions N=1,3,5,etc
A189707 (N+1)/2 of the odd N positions of left turns
A189708 (N+1)/2 of the odd N positions of right turns
A156595 turn 0=left,1=right at even positions N=2,4,6,etc
SEE ALSO
Math::PlanePath, Math::PlanePath::SierpinskiArrowheadCentres, Math::PlanePath::SierpinskiTriangle, Math::PlanePath::KochCurve
HOME PAGE
http://user42.tuxfamily.org/mathplanepath/index.html
LICENSE
Copyright 2011, 2012, 2013, 2014 Kevin Ryde
MathPlanePath is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version.
MathPlanePath is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with MathPlanePath. If not, see <http://www.gnu.org/licenses/>.