NAME
Math::PlanePath::ZOrderCurve  alternate digits to X and Y
SYNOPSIS
use Math::PlanePath::ZOrderCurve;
my $path = Math::PlanePath::ZOrderCurve>new;
my ($x, $y) = $path>n_to_xy (123);
# or another radix digits ...
my $path3 = Math::PlanePath::ZOrderCurve>new (radix => 3);
DESCRIPTION
This path puts points in a selfsimilar Z pattern described by G.M. Morton,
7  42 43 46 47 58 59 62 63
6  40 41 44 45 56 57 60 61
5  34 35 38 39 50 51 54 55
4  32 33 36 37 48 49 52 53
3  10 11 14 15 26 27 30 31
2  8 9 12 13 24 25 28 29
1  2 3 6 7 18 19 22 23
Y=0  0 1 4 5 16 17 20 21 64 ...
+
X=0 1 2 3 4 5 6 7 8
The first four points make a "Z" shape if written with Y going downwards (inverted if drawn upwards as above),
01 Y=0
/
/
23 Y=1
Then groups of those are arranged as a further Z, etc, doubling in size each time.
0 1 4 5 Y=0
2 3  6 7 Y=1
/
/
/
8 9  12 13 Y=2
10 11 14 15 Y=3
Within an power of 2 square 2x2, 4x4, 8x8, 16x16 etc (2^k)x(2^k), all the N values 0 to 2^(2*k)1 are within the square. The top right corner 3, 15, 63, 255 etc of each is the 2^(2*k)1 maximum.
Along the X axis N=0,1,4,5,16,17,etc is the integers with only digits 0,1 in base 4. Along the Y axis N=0,2,8,10,32,etc is the integers with only digits 0,2 in base 4. And along the X=Y diagonal N=0,3,12,15,etc is digits 0,3 in base 4.
In the base Z pattern it can be seen that transposing to Y,X means swapping parts 1 and 2. This applies in the subparts too so in general if N is at X,Y then changing base 4 digits 1<>2 gives the N at the transpose Y,X. For example N=22 at X=6,Y=1 is base4 "112", change 1<>2 is "221" for N=41 at X=1,Y=6.
Power of 2 Values
Plotting N values related to powers of 2 can come out as interesting patterns. For example displaying the N's which have no digit 3 in their base 4 representation gives
*
* *
* *
* * * *
* *
* * * *
* * * *
* * * * * * * *
* *
* * * *
* * * *
* * * * * * * *
* * * *
* * * * * * * *
* * * * * * * *
* * * * * * * * * * * * * * * *
The 0,1,2 and not 3 makes a little 2x2 "L" at the bottom left, then repeating at 4x4 with again the whole "3" position undrawn, and so on. This is the Sierpinski triangle (a rotated version of Math::PlanePath::SierpinskiTriangle). The blanks are also a visual representation of 1in4 crossproducts saved by recursive use of the Karatsuba multiplication algorithm.
Plotting the fibbinary numbers (eg. Math::NumSeq::Fibbinary) which are N values with no adjacent 1 bits in binary makes an attractive treelike pattern,
*
**
*
****
*
**
* *
********
*
**
*
****
* *
** **
* * * *
****************
* *
** **
* *
**** ****
* *
** **
* * * *
******** ********
* * * *
** ** ** **
* * * *
**** **** **** ****
* * * * * * * *
** ** ** ** ** ** ** **
* * * * * * * * * * * * * * * *
****************************************************************
The horizontals arise from N=...0a0b0c for bits a,b,c so Y=...000 and X=...abc, making those N values adjacent. Similarly N=...a0b0c0 for a vertical.
Radix
The radix
parameter can do the same N <> X/Y digit splitting in a higher base. For example radix 3 makes 3x3 groupings,
radix => 3
5  33 34 35 42 43 44
4  30 31 32 39 40 41
3  27 28 29 36 37 38 45 ...
2  6 7 8 15 16 17 24 25 26
1  3 4 5 12 13 14 21 22 23
Y=0  0 1 2 9 10 11 18 19 20
+
X=0 1 2 3 4 5 6 7 8
Along the X axis N=0,1,2,9,10,11,etc is integers with only digits 0,1,2 in base 9. Along the Y axis digits 0,3,6, and along the X=Y diagonal digits 0,4,8. In general for a given radix it's base R*R with the R many digits of the first RxR block.
FUNCTIONS
See "FUNCTIONS" in Math::PlanePath for behaviour common to all path classes.
$path = Math::PlanePath::ZOrderCurve>new ()
$path = Math::PlanePath::ZOrderCurve>new (radix => $r)

Create and return a new path object. The optional
radix
parameter gives the base for digit splitting (the default is binary, radix 2). ($x,$y) = $path>n_to_xy ($n)

Return the X,Y coordinates of point number
$n
on the path. Points begin at 0 and if$n < 0
then the return is an empty list.Fractional positions give an X,Y position along a straight line between the integer positions. The lines don't overlap, but the lines between bit squares soon become rather long and probably of very limited use.
$n = $path>xy_to_n ($x,$y)

Return an integer point number for coordinates
$x,$y
. Each integer N is considered the centre of a unit square and an$x,$y
within that square returns N. ($n_lo, $n_hi) = $path>rect_to_n_range ($x1,$y1, $x2,$y2)

The returned range is exact, meaning
$n_lo
and$n_hi
are the smallest and biggest in the rectangle.
Level Methods
FORMULAS
N to X,Y
The coordinate calculation is simple. The bits of X and Y are every second bit of N. So if N = binary 101010 then X=000 and Y=111 in binary, which is the N=42 shown above at X=0,Y=7.
With the radix
parameter the digits are treated likewise, in the given radix rather than binary.
If N includes a fraction part then it's applied to a straight line towards point N+1. The +1 of N+1 changes X and Y according to how many low radix1 digits there are in N, and thus in X and Y. In general if the lowest non radix1 is in X then
dX=1
dY =  (R^pos  1) # pos=0 for lowest digit
The simplest case is when the lowest digit of N is not radix1, so dX=1,dY=0 across.
If the lowest non radix1 is in Y then
dX =  (R^(pos+1)  1) # pos=0 for lowest digit
dY = 1
If all digits of X and Y are radix1 then the implicit 0 above the top of X is considered the lowest non radix1 and so the first case applies. In the radix=2 above this happens for instance at N=15 binary 1111 so X = binary 11 and Y = binary 11. The 0 above the top of X is at pos=2 so dX=1, dY=(2^21)=3.
Rectangle to N Range
Within each row the N values increase as X increases, and within each column N increases with increasing Y (for all radix
parameters).
So for a given rectangle the smallest N is at the lower left corner (smallest X and smallest Y), and the biggest N is at the upper right (biggest X and biggest Y).
OEIS
This path is in Sloane's Online Encyclopedia of Integer Sequences in various forms,
http://oeis.org/A059905 (etc)
radix=2
A059905 X coordinate
A059906 Y coordinate
A000695 N on X axis (base 4 digits 0,1 only)
A062880 N on Y axis (base 4 digits 0,2 only)
A001196 N on X=Y diagonal (base 4 digits 0,3 only)
A057300 permutation N at transpose Y,X (swap bit pairs)
radix=3
A163325 X coordinate
A163326 Y coordinate
A037314 N on X axis, base 9 digits 0,1,2
A208665 N on X=Y diagonal, base 9 digits 0,3,6
A163327 permutation N at transpose Y,X (swap trit pairs)
radix=4
A126006 permutation N at transpose Y,X (swap digit pairs)
radix=10
A080463 X+Y of radix=10 (from N=1 onwards)
A080464 X*Y of radix=10 (from N=10 onwards)
A080465 abs(XY), from N=10 onwards
A051022 N on X axis (base 100 digits 0 to 9)
radix=16
A217558 permutation N at transpose Y,X (swap digit pairs)
And taking X,Y points in the Diagonals sequence then the value of the following sequences is the N of the ZOrderCurve
at those positions.
radix=2
A054238 numbering by diagonals, from same axis as first step
A054239 inverse permutation
radix=3
A163328 numbering by diagonals, same axis as first step
A163329 inverse permutation
A163330 numbering by diagonals, opp axis as first step
A163331 inverse permutation
Math::PlanePath::Diagonals
numbers points from the Y axis down, which is the opposite axis to the ZOrderCurve
first step along the X axis, so a transpose is needed to give A054238.
SEE ALSO
Math::PlanePath, Math::PlanePath::PeanoCurve, Math::PlanePath::HilbertCurve, Math::PlanePath::ImaginaryBase, Math::PlanePath::CornerReplicate, Math::PlanePath::DigitGroups
http://www.jjj.de/fxt/#fxtbook
(section 1.31.2)
Algorithm::QuadTree, DBIx::SpatialKeys
HOME PAGE
http://user42.tuxfamily.org/mathplanepath/index.html
LICENSE
Copyright 2010, 2011, 2012, 2013, 2014 Kevin Ryde
This file is part of MathPlanePath.
MathPlanePath is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version.
MathPlanePath is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with MathPlanePath. If not, see <http://www.gnu.org/licenses/>.