constant::defer -- constant subs with deferred value calculation
use constant::defer FOO => sub { return $some + $thing; }, BAR => sub { return $an * $other; }; use constant::defer MYOBJ => sub { require My::Class; return My::Class->new_thing; }
constant::defer creates a subroutine which on the first call runs given code to calculate its value, and on the second and subsequent calls just returns that value, like a constant. The value code is discarded once run, allowing it to be garbage collected.
constant::defer
Deferring a calculation is good if it might take a lot of work or produce a big result, but is only needed sometimes or only well into a program run. If it's never needed then the value code never runs.
A deferred constant is generally not inlined or folded (see "Constant Folding" in perlop) like a plain constant since it's not a single scalar value. In the current implementation a deferred constant becomes a plain one after the first use, so may inline etc in code compiled after that (see "IMPLEMENTATION" below).
constant
Here are some typical uses.
A big value or slow calculation only sometimes needed,
use constant::defer SLOWVALUE => sub { long calculation ...; return $result; }; if ($option) { print "s=", SLOWVALUE, "\n"; }
A shared object instance created when needed then re-used,
use constant::defer FORMATTER => sub { return My::Formatter->new }; if ($something) { FORMATTER()->format ... }
The value code might load requisite modules too, again deferring that until actually needed,
use constant::defer big => sub { require Some::Big::Module; return Some::Big::Module->create_something(...); };
Once-only setup code can be created with no return value. The code is garbage collected after the first run and becomes a do-nothing. Remember to have an empty return statement so as not to keep the last expression's value alive forever.
use constant::defer MY_INIT => sub { many lines of setup code ...; return; }; sub new { MY_INIT(); ... }
There are no functions as such, everything works through the use import.
use
use constant::defer NAME1=>SUB1, NAME2=>SUB2, ...;
The parameters are name/subroutine pairs. For each one a sub called NAME is created, running the given SUB the first time its value is needed.
NAME
SUB
NAME defaults to the caller's package, or a fully qualified name can be given. Remember that the bareword stringizing of => doesn't act on a qualified name, so add quotes in that case.
=>
use constant::defer 'Other::Package::BAR' => sub { ... };
For compatibility with the constant module a hash of name/sub arguments is accepted too. But constant::defer doesn't need that since there's only ever one thing (a sub) following each name.
use constant::defer { FOO => sub { ... }, BAR => sub { ... } }; # works without the hashref too use constant::defer FOO => sub { ... }, BAR => sub { ... };
The value sub can return multiple values to make an array style constant sub.
use constant::defer NUMS => sub { return ('one', 'two') }; foreach (NUMS) { print $_,"\n"; }
The value sub is always run in array context, for consistency, irrespective how the constant is used. The return from the new constant sub is an array style
sub () { return @result }
If the value sub was a list-style return like NUMS shown above, then this array-style return is slightly different. In scalar context a list return means the last value (like a comma operator), but an array return in scalar context means the number of elements. A multi-value constant won't normally be used in scalar context, so the difference shouldn't arise. The array style is easier for constant::defer to implement and is the same as the plain constant module does.
NUMS
If the constant is called with arguments then they're passed on to the value sub. This can be good for constants used as object or class methods. Passing anything to plain constants would be unusual.
One cute use for a class method style is to make a "singleton" instance of the class. See examples/instance.pl in the sources for a complete program.
package My::Class; use constant::defer INSTANCE => sub { my ($class) = @_; return $class->new }; package main; $obj = My::Class->INSTANCE;
A subclass might want to be careful about letting a subclass object get into the parent INSTANCE, though if a program only ever used the subclass then that might in fact be desirable.
INSTANCE
Subs created by constant::defer always have prototype (), ensuring they always parse the same way. The prototype has no effect when called as a method like above, but if you want a plain call with arguments then use & to bypass the prototype (see perlsub).
()
&
&MYCONST ('Some value');
Currently constant::defer creates a sub under the requested name and when called it replaces that with a new constant sub the same as use constant would make. This is compact and means that later loaded code might be able to inline it.
use constant
It's fine to keep a reference to the initial sub and in fact that happens quite normally if importing into another module (with the usual Exporter), or an explicit \&foo, or a $package->can('foo'). The initial sub changes itself to jump to the new constant, it doesn't re-run the value code.
Exporter
\&foo
$package->can('foo')
The jump is currently done by a goto to the new coderef, so it's a touch slower than the new constant sub directly. A spot of XS would no doubt make the difference negligible, in fact perhaps to the point where there'd be no need for a new sub, just have the initial transform itself. If the new form looked enough like a plain constant it might inline in later loaded code.
goto
For reference, Package::Constants (as of version 0.02) considers constant::defer subrs as constants, both before and after the first call that runs the value code. Package::Constants just looks for prototyped sub foo () { } functions, so any such subr rates as a constant.
Package::Constants
sub foo () { }
There's many ways to do "deferred" or "lazy" calculations.
Memoize makes a function repeat its return. Results are cached against the arguments, so it keeps the original code whereas constant::defer discards after the first run.
Memoize
Class::Singleton and friends make a create-once My::Class->instance method. constant::defer can get close with the fakery shown under "ARGUMENTS" above, though without a has_instance to query.
Class::Singleton
My::Class->instance
has_instance
Sub::Become offers some syntactic sugar for redefining the running subroutine, including to a constant.
Sub::Become
Sub::SingletonBuilder can create an instance function for a class. It's geared towards objects and so won't allow 0 or undef as the return value.
Sub::SingletonBuilder
undef
A scalar can be rigged up to run code on its first access. Data::Lazy uses a tie. Scalar::Defer and Scalar::Lazy use overload on an object. Data::Thunk optimizes out the object from Scalar::Defer after the first run. Variable::Lazy uses XS magic removed after the first fetch and some parsing for syntactic sugar.
Data::Lazy
tie
Scalar::Defer
Scalar::Lazy
overload
Data::Thunk
Variable::Lazy
The advantage of a variable is that it interpolates in strings, but it won't inline in later loaded code; sloppy XS code might bypass the magic; and package variables aren't very friendly when subclassing.
Object::Lazy and Object::Trampoline rig up an object wrapper to load and create an actual object only when a method is called, dispatching to it and replacing the callers $_[0]. The advantage is you can pass the wrapper object around, etc, deferring creation to an even later point than a sub or scalar can.
Object::Lazy
Object::Trampoline
$_[0]
Object::Realize::Later, Class::LazyObject and Class::LazyFactory help make a defer class which transforms lazy stub objects to real ones when a method call is made. A separate defer class is required for each real class.
Object::Realize::Later
Class::LazyObject
Class::LazyFactory
once.pm sets up a run-once code block, but with no particular return value and not discarding the code after run.
once.pm
Class::LazyLoad and deferred load code on a class method call such as object creation. They're more about module loading than a defer of a particular value.
Class::LazyLoad
deferred
Tie::LazyList and Tie::Array::Lazy makes an array calculate values on-demand from a generator function. Hash::Lazy does a similar thing for hashes. Tie::LazyFunction hides a function behind a scalar; its laziness is in the argument evaluation, the function is called every time.
Tie::LazyList
Tie::Array::Lazy
Hash::Lazy
Tie::LazyFunction
constant, perlsub, constant::lexical
Memoize, Attribute::Memoize, Memoize::Attrs, Class::Singleton, Data::Lazy, Scalar::Defer, Scalar::Lazy, Data::Thunk, Variable::Lazy, Sub::Become, Sub::SingletonBuilder, Object::Lazy, Object::Trampoline, Object::Realize::Later, once, Class::LazyLoad, deferred
http://user42.tuxfamily.org/constant-defer/index.html
Copyright 2009, 2010, 2011 Kevin Ryde
constant-defer is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version.
constant-defer is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with constant-defer. If not, see <http://www.gnu.org/licenses/>.
To install constant::defer, copy and paste the appropriate command in to your terminal.
cpanm
cpanm constant::defer
CPAN shell
perl -MCPAN -e shell install constant::defer
For more information on module installation, please visit the detailed CPAN module installation guide.