++ed by:
TADEG GVL YSASAKI FLORIAN SYP

78 PAUSE users
66 non-PAUSE users.

Author image Marc A. Lehmann

NAME

AnyEvent - provide framework for multiple event loops

EV, Event, Glib, Tk, Perl, Event::Lib, Qt and POE are various supported event loops.

SYNOPSIS

   use AnyEvent;

   # file descriptor readable
   my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ...  });

   # one-shot or repeating timers
   my $w = AnyEvent->timer (after => $seconds, cb => sub { ...  });
   my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...

   print AnyEvent->now;  # prints current event loop time
   print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.

   # POSIX signal
   my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });

   # child process exit
   my $w = AnyEvent->child (pid => $pid, cb => sub {
      my ($pid, $status) = @_;
      ...
   });

   # called when event loop idle (if applicable)
   my $w = AnyEvent->idle (cb => sub { ... });

   my $w = AnyEvent->condvar; # stores whether a condition was flagged
   $w->send; # wake up current and all future recv's
   $w->recv; # enters "main loop" till $condvar gets ->send
   # use a condvar in callback mode:
   $w->cb (sub { $_[0]->recv });

INTRODUCTION/TUTORIAL

This manpage is mainly a reference manual. If you are interested in a tutorial or some gentle introduction, have a look at the AnyEvent::Intro manpage.

WHY YOU SHOULD USE THIS MODULE (OR NOT)

Glib, POE, IO::Async, Event... CPAN offers event models by the dozen nowadays. So what is different about AnyEvent?

Executive Summary: AnyEvent is compatible, AnyEvent is free of policy and AnyEvent is small and efficient.

First and foremost, AnyEvent is not an event model itself, it only interfaces to whatever event model the main program happens to use, in a pragmatic way. For event models and certain classes of immortals alike, the statement "there can only be one" is a bitter reality: In general, only one event loop can be active at the same time in a process. AnyEvent cannot change this, but it can hide the differences between those event loops.

The goal of AnyEvent is to offer module authors the ability to do event programming (waiting for I/O or timer events) without subscribing to a religion, a way of living, and most importantly: without forcing your module users into the same thing by forcing them to use the same event model you use.

For modules like POE or IO::Async (which is a total misnomer as it is actually doing all I/O synchronously...), using them in your module is like joining a cult: After you joined, you are dependent on them and you cannot use anything else, as they are simply incompatible to everything that isn't them. What's worse, all the potential users of your module are also forced to use the same event loop you use.

AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works fine. AnyEvent + Tk works fine etc. etc. but none of these work together with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if your module uses one of those, every user of your module has to use it, too. But if your module uses AnyEvent, it works transparently with all event models it supports (including stuff like IO::Async, as long as those use one of the supported event loops. It is trivial to add new event loops to AnyEvent, too, so it is future-proof).

In addition to being free of having to use the one and only true event model, AnyEvent also is free of bloat and policy: with POE or similar modules, you get an enormous amount of code and strict rules you have to follow. AnyEvent, on the other hand, is lean and up to the point, by only offering the functionality that is necessary, in as thin as a wrapper as technically possible.

Of course, AnyEvent comes with a big (and fully optional!) toolbox of useful functionality, such as an asynchronous DNS resolver, 100% non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms such as Windows) and lots of real-world knowledge and workarounds for platform bugs and differences.

Now, if you do want lots of policy (this can arguably be somewhat useful) and you want to force your users to use the one and only event model, you should not use this module.

DESCRIPTION

AnyEvent provides an identical interface to multiple event loops. This allows module authors to utilise an event loop without forcing module users to use the same event loop (as only a single event loop can coexist peacefully at any one time).

The interface itself is vaguely similar, but not identical to the Event module.

During the first call of any watcher-creation method, the module tries to detect the currently loaded event loop by probing whether one of the following modules is already loaded: EV, Event, Glib, AnyEvent::Impl::Perl, Tk, Event::Lib, Qt, POE. The first one found is used. If none are found, the module tries to load these modules (excluding Tk, Event::Lib, Qt and POE as the pure perl adaptor should always succeed) in the order given. The first one that can be successfully loaded will be used. If, after this, still none could be found, AnyEvent will fall back to a pure-perl event loop, which is not very efficient, but should work everywhere.

Because AnyEvent first checks for modules that are already loaded, loading an event model explicitly before first using AnyEvent will likely make that model the default. For example:

   use Tk;
   use AnyEvent;

   # .. AnyEvent will likely default to Tk

The likely means that, if any module loads another event model and starts using it, all bets are off. Maybe you should tell their authors to use AnyEvent so their modules work together with others seamlessly...

The pure-perl implementation of AnyEvent is called AnyEvent::Impl::Perl. Like other event modules you can load it explicitly and enjoy the high availability of that event loop :)

WATCHERS

AnyEvent has the central concept of a watcher, which is an object that stores relevant data for each kind of event you are waiting for, such as the callback to call, the file handle to watch, etc.

These watchers are normal Perl objects with normal Perl lifetime. After creating a watcher it will immediately "watch" for events and invoke the callback when the event occurs (of course, only when the event model is in control).

Note that callbacks must not permanently change global variables potentially in use by the event loop (such as $_ or $[) and that callbacks must not die. The former is good programming practise in Perl and the latter stems from the fact that exception handling differs widely between event loops.

To disable the watcher you have to destroy it (e.g. by setting the variable you store it in to undef or otherwise deleting all references to it).

All watchers are created by calling a method on the AnyEvent class.

Many watchers either are used with "recursion" (repeating timers for example), or need to refer to their watcher object in other ways.

An any way to achieve that is this pattern:

   my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
      # you can use $w here, for example to undef it
      undef $w;
   });

Note that my $w; $w = combination. This is necessary because in Perl, my variables are only visible after the statement in which they are declared.

I/O WATCHERS

You can create an I/O watcher by calling the AnyEvent->io method with the following mandatory key-value pairs as arguments:

fh is the Perl file handle (not file descriptor) to watch for events (AnyEvent might or might not keep a reference to this file handle). Note that only file handles pointing to things for which non-blocking operation makes sense are allowed. This includes sockets, most character devices, pipes, fifos and so on, but not for example files or block devices.

poll must be a string that is either r or w, which creates a watcher waiting for "r"eadable or "w"ritable events, respectively.

cb is the callback to invoke each time the file handle becomes ready.

Although the callback might get passed parameters, their value and presence is undefined and you cannot rely on them. Portable AnyEvent callbacks cannot use arguments passed to I/O watcher callbacks.

The I/O watcher might use the underlying file descriptor or a copy of it. You must not close a file handle as long as any watcher is active on the underlying file descriptor.

Some event loops issue spurious readyness notifications, so you should always use non-blocking calls when reading/writing from/to your file handles.

Example: wait for readability of STDIN, then read a line and disable the watcher.

   my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
      chomp (my $input = <STDIN>);
      warn "read: $input\n";
      undef $w;
   });

TIME WATCHERS

You can create a time watcher by calling the AnyEvent->timer method with the following mandatory arguments:

after specifies after how many seconds (fractional values are supported) the callback should be invoked. cb is the callback to invoke in that case.

Although the callback might get passed parameters, their value and presence is undefined and you cannot rely on them. Portable AnyEvent callbacks cannot use arguments passed to time watcher callbacks.

The callback will normally be invoked once only. If you specify another parameter, interval, as a strictly positive number (> 0), then the callback will be invoked regularly at that interval (in fractional seconds) after the first invocation. If interval is specified with a false value, then it is treated as if it were missing.

The callback will be rescheduled before invoking the callback, but no attempt is done to avoid timer drift in most backends, so the interval is only approximate.

Example: fire an event after 7.7 seconds.

   my $w = AnyEvent->timer (after => 7.7, cb => sub {
      warn "timeout\n";
   });

   # to cancel the timer:
   undef $w;

Example 2: fire an event after 0.5 seconds, then roughly every second.

   my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
      warn "timeout\n";
   };

TIMING ISSUES

There are two ways to handle timers: based on real time (relative, "fire in 10 seconds") and based on wallclock time (absolute, "fire at 12 o'clock").

While most event loops expect timers to specified in a relative way, they use absolute time internally. This makes a difference when your clock "jumps", for example, when ntp decides to set your clock backwards from the wrong date of 2014-01-01 to 2008-01-01, a watcher that is supposed to fire "after" a second might actually take six years to finally fire.

AnyEvent cannot compensate for this. The only event loop that is conscious about these issues is EV, which offers both relative (ev_timer, based on true relative time) and absolute (ev_periodic, based on wallclock time) timers.

AnyEvent always prefers relative timers, if available, matching the AnyEvent API.

AnyEvent has two additional methods that return the "current time":

AnyEvent->time

This returns the "current wallclock time" as a fractional number of seconds since the Epoch (the same thing as time or Time::HiRes::time return, and the result is guaranteed to be compatible with those).

It progresses independently of any event loop processing, i.e. each call will check the system clock, which usually gets updated frequently.

AnyEvent->now

This also returns the "current wallclock time", but unlike time, above, this value might change only once per event loop iteration, depending on the event loop (most return the same time as time, above). This is the time that AnyEvent's timers get scheduled against.

In almost all cases (in all cases if you don't care), this is the function to call when you want to know the current time.

This function is also often faster then AnyEvent->time, and thus the preferred method if you want some timestamp (for example, AnyEvent::Handle uses this to update it's activity timeouts).

The rest of this section is only of relevance if you try to be very exact with your timing, you can skip it without bad conscience.

For a practical example of when these times differ, consider Event::Lib and EV and the following set-up:

The event loop is running and has just invoked one of your callback at time=500 (assume no other callbacks delay processing). In your callback, you wait a second by executing sleep 1 (blocking the process for a second) and then (at time=501) you create a relative timer that fires after three seconds.

With Event::Lib, AnyEvent->time and AnyEvent->now will both return 501, because that is the current time, and the timer will be scheduled to fire at time=504 (501 + 3).

With EV, AnyEvent->time returns 501 (as that is the current time), but AnyEvent->now returns 500, as that is the time the last event processing phase started. With EV, your timer gets scheduled to run at time=503 (500 + 3).

In one sense, Event::Lib is more exact, as it uses the current time regardless of any delays introduced by event processing. However, most callbacks do not expect large delays in processing, so this causes a higher drift (and a lot more system calls to get the current time).

In another sense, EV is more exact, as your timer will be scheduled at the same time, regardless of how long event processing actually took.

In either case, if you care (and in most cases, you don't), then you can get whatever behaviour you want with any event loop, by taking the difference between AnyEvent->time and AnyEvent->now into account.

AnyEvent->now_update

Some event loops (such as EV or AnyEvent::Impl::Perl) cache the current time for each loop iteration (see the discussion of AnyEvent->now, above).

When a callback runs for a long time (or when the process sleeps), then this "current" time will differ substantially from the real time, which might affect timers and time-outs.

When this is the case, you can call this method, which will update the event loop's idea of "current time".

Note that updating the time might cause some events to be handled.

SIGNAL WATCHERS

You can watch for signals using a signal watcher, signal is the signal name in uppercase and without any SIG prefix, cb is the Perl callback to be invoked whenever a signal occurs.

Although the callback might get passed parameters, their value and presence is undefined and you cannot rely on them. Portable AnyEvent callbacks cannot use arguments passed to signal watcher callbacks.

Multiple signal occurrences can be clumped together into one callback invocation, and callback invocation will be synchronous. Synchronous means that it might take a while until the signal gets handled by the process, but it is guaranteed not to interrupt any other callbacks.

The main advantage of using these watchers is that you can share a signal between multiple watchers.

This watcher might use %SIG, so programs overwriting those signals directly will likely not work correctly.

Example: exit on SIGINT

   my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });

CHILD PROCESS WATCHERS

You can also watch on a child process exit and catch its exit status.

The child process is specified by the pid argument (if set to 0, it watches for any child process exit). The watcher will triggered only when the child process has finished and an exit status is available, not on any trace events (stopped/continued).

The callback will be called with the pid and exit status (as returned by waitpid), so unlike other watcher types, you can rely on child watcher callback arguments.

This watcher type works by installing a signal handler for SIGCHLD, and since it cannot be shared, nothing else should use SIGCHLD or reap random child processes (waiting for specific child processes, e.g. inside system, is just fine).

There is a slight catch to child watchers, however: you usually start them after the child process was created, and this means the process could have exited already (and no SIGCHLD will be sent anymore).

Not all event models handle this correctly (neither POE nor IO::Async do, see their AnyEvent::Impl manpages for details), but even for event models that do handle this correctly, they usually need to be loaded before the process exits (i.e. before you fork in the first place). AnyEvent's pure perl event loop handles all cases correctly regardless of when you start the watcher.

This means you cannot create a child watcher as the very first thing in an AnyEvent program, you have to create at least one watcher before you fork the child (alternatively, you can call AnyEvent::detect).

Example: fork a process and wait for it

   my $done = AnyEvent->condvar;
  
   my $pid = fork or exit 5;
  
   my $w = AnyEvent->child (
      pid => $pid,
      cb  => sub {
         my ($pid, $status) = @_;
         warn "pid $pid exited with status $status";
         $done->send;
      },
   );
  
   # do something else, then wait for process exit
   $done->recv;

IDLE WATCHERS

Sometimes there is a need to do something, but it is not so important to do it instantly, but only when there is nothing better to do. This "nothing better to do" is usually defined to be "no other events need attention by the event loop".

Idle watchers ideally get invoked when the event loop has nothing better to do, just before it would block the process to wait for new events. Instead of blocking, the idle watcher is invoked.

Most event loops unfortunately do not really support idle watchers (only EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent will simply call the callback "from time to time".

Example: read lines from STDIN, but only process them when the program is otherwise idle:

   my @lines; # read data
   my $idle_w;
   my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
      push @lines, scalar <STDIN>;

      # start an idle watcher, if not already done
      $idle_w ||= AnyEvent->idle (cb => sub {
         # handle only one line, when there are lines left
         if (my $line = shift @lines) {
            print "handled when idle: $line";
         } else {
            # otherwise disable the idle watcher again
            undef $idle_w;
         }
      });
   });

CONDITION VARIABLES

If you are familiar with some event loops you will know that all of them require you to run some blocking "loop", "run" or similar function that will actively watch for new events and call your callbacks.

AnyEvent is different, it expects somebody else to run the event loop and will only block when necessary (usually when told by the user).

The instrument to do that is called a "condition variable", so called because they represent a condition that must become true.

Condition variables can be created by calling the AnyEvent->condvar method, usually without arguments. The only argument pair allowed is

cb, which specifies a callback to be called when the condition variable becomes true, with the condition variable as the first argument (but not the results).

After creation, the condition variable is "false" until it becomes "true" by calling the send method (or calling the condition variable as if it were a callback, read about the caveats in the description for the ->send method).

Condition variables are similar to callbacks, except that you can optionally wait for them. They can also be called merge points - points in time where multiple outstanding events have been processed. And yet another way to call them is transactions - each condition variable can be used to represent a transaction, which finishes at some point and delivers a result.

Condition variables are very useful to signal that something has finished, for example, if you write a module that does asynchronous http requests, then a condition variable would be the ideal candidate to signal the availability of results. The user can either act when the callback is called or can synchronously ->recv for the results.

You can also use them to simulate traditional event loops - for example, you can block your main program until an event occurs - for example, you could ->recv in your main program until the user clicks the Quit button of your app, which would ->send the "quit" event.

Note that condition variables recurse into the event loop - if you have two pieces of code that call ->recv in a round-robin fashion, you lose. Therefore, condition variables are good to export to your caller, but you should avoid making a blocking wait yourself, at least in callbacks, as this asks for trouble.

Condition variables are represented by hash refs in perl, and the keys used by AnyEvent itself are all named _ae_XXX to make subclassing easy (it is often useful to build your own transaction class on top of AnyEvent). To subclass, use AnyEvent::CondVar as base class and call it's new method in your own new method.

There are two "sides" to a condition variable - the "producer side" which eventually calls -> send, and the "consumer side", which waits for the send to occur.

Example: wait for a timer.

   # wait till the result is ready
   my $result_ready = AnyEvent->condvar;

   # do something such as adding a timer
   # or socket watcher the calls $result_ready->send
   # when the "result" is ready.
   # in this case, we simply use a timer:
   my $w = AnyEvent->timer (
      after => 1,
      cb    => sub { $result_ready->send },
   );

   # this "blocks" (while handling events) till the callback
   # calls send
   $result_ready->recv;

Example: wait for a timer, but take advantage of the fact that condition variables are also code references.

   my $done = AnyEvent->condvar;
   my $delay = AnyEvent->timer (after => 5, cb => $done);
   $done->recv;

Example: Imagine an API that returns a condvar and doesn't support callbacks. This is how you make a synchronous call, for example from the main program:

   use AnyEvent::CouchDB;

   ...

   my @info = $couchdb->info->recv;

And this is how you would just ste a callback to be called whenever the results are available:

   $couchdb->info->cb (sub {
      my @info = $_[0]->recv;
   });

METHODS FOR PRODUCERS

These methods should only be used by the producing side, i.e. the code/module that eventually sends the signal. Note that it is also the producer side which creates the condvar in most cases, but it isn't uncommon for the consumer to create it as well.

$cv->send (...)

Flag the condition as ready - a running ->recv and all further calls to recv will (eventually) return after this method has been called. If nobody is waiting the send will be remembered.

If a callback has been set on the condition variable, it is called immediately from within send.

Any arguments passed to the send call will be returned by all future ->recv calls.

Condition variables are overloaded so one can call them directly (as a code reference). Calling them directly is the same as calling send. Note, however, that many C-based event loops do not handle overloading, so as tempting as it may be, passing a condition variable instead of a callback does not work. Both the pure perl and EV loops support overloading, however, as well as all functions that use perl to invoke a callback (as in AnyEvent::Socket and AnyEvent::DNS for example).

$cv->croak ($error)

Similar to send, but causes all call's to ->recv to invoke Carp::croak with the given error message/object/scalar.

This can be used to signal any errors to the condition variable user/consumer.

$cv->begin ([group callback])
$cv->end

These two methods can be used to combine many transactions/events into one. For example, a function that pings many hosts in parallel might want to use a condition variable for the whole process.

Every call to ->begin will increment a counter, and every call to ->end will decrement it. If the counter reaches 0 in ->end, the (last) callback passed to begin will be executed. That callback is supposed to call ->send, but that is not required. If no callback was set, send will be called without any arguments.

You can think of $cv->send giving you an OR condition (one call sends), while $cv->begin and $cv->end giving you an AND condition (all begin calls must be end'ed before the condvar sends).

Let's start with a simple example: you have two I/O watchers (for example, STDOUT and STDERR for a program), and you want to wait for both streams to close before activating a condvar:

   my $cv = AnyEvent->condvar;

   $cv->begin; # first watcher
   my $w1 = AnyEvent->io (fh => $fh1, cb => sub {
      defined sysread $fh1, my $buf, 4096
         or $cv->end;
   });

   $cv->begin; # second watcher
   my $w2 = AnyEvent->io (fh => $fh2, cb => sub {
      defined sysread $fh2, my $buf, 4096
         or $cv->end;
   });

   $cv->recv;

This works because for every event source (EOF on file handle), there is one call to begin, so the condvar waits for all calls to end before sending.

The ping example mentioned above is slightly more complicated, as the there are results to be passwd back, and the number of tasks that are begung can potentially be zero:

   my $cv = AnyEvent->condvar;

   my %result;
   $cv->begin (sub { $cv->send (\%result) });

   for my $host (@list_of_hosts) {
      $cv->begin;
      ping_host_then_call_callback $host, sub {
         $result{$host} = ...;
         $cv->end;
      };
   }

   $cv->end;

This code fragment supposedly pings a number of hosts and calls send after results for all then have have been gathered - in any order. To achieve this, the code issues a call to begin when it starts each ping request and calls end when it has received some result for it. Since begin and end only maintain a counter, the order in which results arrive is not relevant.

There is an additional bracketing call to begin and end outside the loop, which serves two important purposes: first, it sets the callback to be called once the counter reaches 0, and second, it ensures that send is called even when no hosts are being pinged (the loop doesn't execute once).

This is the general pattern when you "fan out" into multiple (but potentially none) subrequests: use an outer begin/end pair to set the callback and ensure end is called at least once, and then, for each subrequest you start, call begin and for each subrequest you finish, call end.

METHODS FOR CONSUMERS

These methods should only be used by the consuming side, i.e. the code awaits the condition.

$cv->recv

Wait (blocking if necessary) until the ->send or ->croak methods have been called on c<$cv>, while servicing other watchers normally.

You can only wait once on a condition - additional calls are valid but will return immediately.

If an error condition has been set by calling ->croak, then this function will call croak.

In list context, all parameters passed to send will be returned, in scalar context only the first one will be returned.

Not all event models support a blocking wait - some die in that case (programs might want to do that to stay interactive), so if you are using this from a module, never require a blocking wait, but let the caller decide whether the call will block or not (for example, by coupling condition variables with some kind of request results and supporting callbacks so the caller knows that getting the result will not block, while still supporting blocking waits if the caller so desires).

Another reason never to ->recv in a module is that you cannot sensibly have two ->recv's in parallel, as that would require multiple interpreters or coroutines/threads, none of which AnyEvent can supply.

The Coro module, however, can and does supply coroutines and, in fact, Coro::AnyEvent replaces AnyEvent's condvars by coroutine-safe versions and also integrates coroutines into AnyEvent, making blocking ->recv calls perfectly safe as long as they are done from another coroutine (one that doesn't run the event loop).

You can ensure that -recv never blocks by setting a callback and only calling ->recv from within that callback (or at a later time). This will work even when the event loop does not support blocking waits otherwise.

$bool = $cv->ready

Returns true when the condition is "true", i.e. whether send or croak have been called.

$cb = $cv->cb ($cb->($cv))

This is a mutator function that returns the callback set and optionally replaces it before doing so.

The callback will be called when the condition becomes "true", i.e. when send or croak are called, with the only argument being the condition variable itself. Calling recv inside the callback or at any later time is guaranteed not to block.

GLOBAL VARIABLES AND FUNCTIONS

$AnyEvent::MODEL

Contains undef until the first watcher is being created. Then it contains the event model that is being used, which is the name of the Perl class implementing the model. This class is usually one of the AnyEvent::Impl:xxx modules, but can be any other class in the case AnyEvent has been extended at runtime (e.g. in rxvt-unicode).

The known classes so far are:

   AnyEvent::Impl::EV        based on EV (an interface to libev, best choice).
   AnyEvent::Impl::Event     based on Event, second best choice.
   AnyEvent::Impl::Perl      pure-perl implementation, fast and portable.
   AnyEvent::Impl::Glib      based on Glib, third-best choice.
   AnyEvent::Impl::Tk        based on Tk, very bad choice.
   AnyEvent::Impl::Qt        based on Qt, cannot be autoprobed (see its docs).
   AnyEvent::Impl::EventLib  based on Event::Lib, leaks memory and worse.
   AnyEvent::Impl::POE       based on POE, not generic enough for full support.

   # warning, support for IO::Async is only partial, as it is too broken
   # and limited toe ven support the AnyEvent API. See AnyEvent::Impl::Async.
   AnyEvent::Impl::IOAsync   based on IO::Async, cannot be autoprobed (see its docs).

There is no support for WxWidgets, as WxWidgets has no support for watching file handles. However, you can use WxWidgets through the POE Adaptor, as POE has a Wx backend that simply polls 20 times per second, which was considered to be too horrible to even consider for AnyEvent. Likewise, other POE backends can be used by AnyEvent by using it's adaptor.

AnyEvent knows about Prima and Wx and will try to use POE when autodetecting them.

AnyEvent::detect

Returns $AnyEvent::MODEL, forcing autodetection of the event model if necessary. You should only call this function right before you would have created an AnyEvent watcher anyway, that is, as late as possible at runtime.

$guard = AnyEvent::post_detect { BLOCK }

Arranges for the code block to be executed as soon as the event model is autodetected (or immediately if this has already happened).

If called in scalar or list context, then it creates and returns an object that automatically removes the callback again when it is destroyed. See Coro::BDB for a case where this is useful.

@AnyEvent::post_detect

If there are any code references in this array (you can push to it before or after loading AnyEvent), then they will called directly after the event loop has been chosen.

You should check $AnyEvent::MODEL before adding to this array, though: if it contains a true value then the event loop has already been detected, and the array will be ignored.

Best use AnyEvent::post_detect { BLOCK } instead.

WHAT TO DO IN A MODULE

As a module author, you should use AnyEvent and call AnyEvent methods freely, but you should not load a specific event module or rely on it.

Be careful when you create watchers in the module body - AnyEvent will decide which event module to use as soon as the first method is called, so by calling AnyEvent in your module body you force the user of your module to load the event module first.

Never call ->recv on a condition variable unless you know that the ->send method has been called on it already. This is because it will stall the whole program, and the whole point of using events is to stay interactive.

It is fine, however, to call ->recv when the user of your module requests it (i.e. if you create a http request object ad have a method called results that returns the results, it should call ->recv freely, as the user of your module knows what she is doing. always).

WHAT TO DO IN THE MAIN PROGRAM

There will always be a single main program - the only place that should dictate which event model to use.

If it doesn't care, it can just "use AnyEvent" and use it itself, or not do anything special (it does not need to be event-based) and let AnyEvent decide which implementation to chose if some module relies on it.

If the main program relies on a specific event model - for example, in Gtk2 programs you have to rely on the Glib module - you should load the event module before loading AnyEvent or any module that uses it: generally speaking, you should load it as early as possible. The reason is that modules might create watchers when they are loaded, and AnyEvent will decide on the event model to use as soon as it creates watchers, and it might chose the wrong one unless you load the correct one yourself.

You can chose to use a pure-perl implementation by loading the AnyEvent::Impl::Perl module, which gives you similar behaviour everywhere, but letting AnyEvent chose the model is generally better.

MAINLOOP EMULATION

Sometimes (often for short test scripts, or even standalone programs who only want to use AnyEvent), you do not want to run a specific event loop.

In that case, you can use a condition variable like this:

   AnyEvent->condvar->recv;

This has the effect of entering the event loop and looping forever.

Note that usually your program has some exit condition, in which case it is better to use the "traditional" approach of storing a condition variable somewhere, waiting for it, and sending it when the program should exit cleanly.

OTHER MODULES

The following is a non-exhaustive list of additional modules that use AnyEvent and can therefore be mixed easily with other AnyEvent modules in the same program. Some of the modules come with AnyEvent, some are available via CPAN.

AnyEvent::Util

Contains various utility functions that replace often-used but blocking functions such as inet_aton by event-/callback-based versions.

AnyEvent::Socket

Provides various utility functions for (internet protocol) sockets, addresses and name resolution. Also functions to create non-blocking tcp connections or tcp servers, with IPv6 and SRV record support and more.

AnyEvent::Handle

Provide read and write buffers, manages watchers for reads and writes, supports raw and formatted I/O, I/O queued and fully transparent and non-blocking SSL/TLS.

AnyEvent::DNS

Provides rich asynchronous DNS resolver capabilities.

AnyEvent::HTTP

A simple-to-use HTTP library that is capable of making a lot of concurrent HTTP requests.

AnyEvent::HTTPD

Provides a simple web application server framework.

AnyEvent::FastPing

The fastest ping in the west.

AnyEvent::DBI

Executes DBI requests asynchronously in a proxy process.

AnyEvent::AIO

Truly asynchronous I/O, should be in the toolbox of every event programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent together.

AnyEvent::BDB

Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses BDB and AnyEvent together.

AnyEvent::GPSD

A non-blocking interface to gpsd, a daemon delivering GPS information.

AnyEvent::IGS

A non-blocking interface to the Internet Go Server protocol (used by App::IGS).

AnyEvent::IRC

AnyEvent based IRC client module family (replacing the older Net::IRC3).

Net::XMPP2

AnyEvent based XMPP (Jabber protocol) module family.

Net::FCP

AnyEvent-based implementation of the Freenet Client Protocol, birthplace of AnyEvent.

Event::ExecFlow

High level API for event-based execution flow control.

Coro

Has special support for AnyEvent via Coro::AnyEvent.

IO::Lambda

The lambda approach to I/O - don't ask, look there. Can use AnyEvent.

ERROR AND EXCEPTION HANDLING

In general, AnyEvent does not do any error handling - it relies on the caller to do that if required. The AnyEvent::Strict module (see also the PERL_ANYEVENT_STRICT environment variable, below) provides strict checking of all AnyEvent methods, however, which is highly useful during development.

As for exception handling (i.e. runtime errors and exceptions thrown while executing a callback), this is not only highly event-loop specific, but also not in any way wrapped by this module, as this is the job of the main program.

The pure perl event loop simply re-throws the exception (usually within condvar->recv), the Event and EV modules call $Event/EV::DIED->(), Glib uses install_exception_handler and so on.

ENVIRONMENT VARIABLES

The following environment variables are used by this module or its submodules.

Note that AnyEvent will remove all environment variables starting with PERL_ANYEVENT_ from %ENV when it is loaded while taint mode is enabled.

PERL_ANYEVENT_VERBOSE

By default, AnyEvent will be completely silent except in fatal conditions. You can set this environment variable to make AnyEvent more talkative.

When set to 1 or higher, causes AnyEvent to warn about unexpected conditions, such as not being able to load the event model specified by PERL_ANYEVENT_MODEL.

When set to 2 or higher, cause AnyEvent to report to STDERR which event model it chooses.

PERL_ANYEVENT_STRICT

AnyEvent does not do much argument checking by default, as thorough argument checking is very costly. Setting this variable to a true value will cause AnyEvent to load AnyEvent::Strict and then to thoroughly check the arguments passed to most method calls. If it finds any problems, it will croak.

In other words, enables "strict" mode.

Unlike use strict, it is definitely recommended to keep it off in production. Keeping PERL_ANYEVENT_STRICT=1 in your environment while developing programs can be very useful, however.

PERL_ANYEVENT_MODEL

This can be used to specify the event model to be used by AnyEvent, before auto detection and -probing kicks in. It must be a string consisting entirely of ASCII letters. The string AnyEvent::Impl:: gets prepended and the resulting module name is loaded and if the load was successful, used as event model. If it fails to load AnyEvent will proceed with auto detection and -probing.

This functionality might change in future versions.

For example, to force the pure perl model (AnyEvent::Impl::Perl) you could start your program like this:

   PERL_ANYEVENT_MODEL=Perl perl ...
PERL_ANYEVENT_PROTOCOLS

Used by both AnyEvent::DNS and AnyEvent::Socket to determine preferences for IPv4 or IPv6. The default is unspecified (and might change, or be the result of auto probing).

Must be set to a comma-separated list of protocols or address families, current supported: ipv4 and ipv6. Only protocols mentioned will be used, and preference will be given to protocols mentioned earlier in the list.

This variable can effectively be used for denial-of-service attacks against local programs (e.g. when setuid), although the impact is likely small, as the program has to handle conenction and other failures anyways.

Examples: PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6 - prefer IPv4 over IPv6, but support both and try to use both. PERL_ANYEVENT_PROTOCOLS=ipv4 - only support IPv4, never try to resolve or contact IPv6 addresses. PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4 support either IPv4 or IPv6, but prefer IPv6 over IPv4.

PERL_ANYEVENT_EDNS0

Used by AnyEvent::DNS to decide whether to use the EDNS0 extension for DNS. This extension is generally useful to reduce DNS traffic, but some (broken) firewalls drop such DNS packets, which is why it is off by default.

Setting this variable to 1 will cause AnyEvent::DNS to announce EDNS0 in its DNS requests.

PERL_ANYEVENT_MAX_FORKS

The maximum number of child processes that AnyEvent::Util::fork_call will create in parallel.

SUPPLYING YOUR OWN EVENT MODEL INTERFACE

This is an advanced topic that you do not normally need to use AnyEvent in a module. This section is only of use to event loop authors who want to provide AnyEvent compatibility.

If you need to support another event library which isn't directly supported by AnyEvent, you can supply your own interface to it by pushing, before the first watcher gets created, the package name of the event module and the package name of the interface to use onto @AnyEvent::REGISTRY. You can do that before and even without loading AnyEvent, so it is reasonably cheap.

Example:

   push @AnyEvent::REGISTRY, [urxvt => urxvt::anyevent::];

This tells AnyEvent to (literally) use the urxvt::anyevent:: package/class when it finds the urxvt package/module is already loaded.

When AnyEvent is loaded and asked to find a suitable event model, it will first check for the presence of urxvt by trying to use the urxvt::anyevent module.

The class should provide implementations for all watcher types. See AnyEvent::Impl::EV (source code), AnyEvent::Impl::Glib (Source code) and so on for actual examples. Use perldoc -m AnyEvent::Impl::Glib to see the sources.

If you don't provide signal and child watchers than AnyEvent will provide suitable (hopefully) replacements.

The above example isn't fictitious, the rxvt-unicode (a.k.a. urxvt) terminal emulator uses the above line as-is. An interface isn't included in AnyEvent because it doesn't make sense outside the embedded interpreter inside rxvt-unicode, and it is updated and maintained as part of the rxvt-unicode distribution.

rxvt-unicode also cheats a bit by not providing blocking access to condition variables: code blocking while waiting for a condition will die. This still works with most modules/usages, and blocking calls must not be done in an interactive application, so it makes sense.

EXAMPLE PROGRAM

The following program uses an I/O watcher to read data from STDIN, a timer to display a message once per second, and a condition variable to quit the program when the user enters quit:

   use AnyEvent;

   my $cv = AnyEvent->condvar;

   my $io_watcher = AnyEvent->io (
      fh   => \*STDIN,
      poll => 'r',
      cb   => sub {
         warn "io event <$_[0]>\n";   # will always output <r>
         chomp (my $input = <STDIN>); # read a line
         warn "read: $input\n";       # output what has been read
         $cv->send if $input =~ /^q/i; # quit program if /^q/i
      },
   );

   my $time_watcher; # can only be used once

   sub new_timer {
      $timer = AnyEvent->timer (after => 1, cb => sub {
         warn "timeout\n"; # print 'timeout' about every second
         &new_timer; # and restart the time
      });
   }

   new_timer; # create first timer

   $cv->recv; # wait until user enters /^q/i

REAL-WORLD EXAMPLE

Consider the Net::FCP module. It features (among others) the following API calls, which are to freenet what HTTP GET requests are to http:

   my $data = $fcp->client_get ($url); # blocks

   my $transaction = $fcp->txn_client_get ($url); # does not block
   $transaction->cb ( sub { ... } ); # set optional result callback
   my $data = $transaction->result; # possibly blocks

The client_get method works like LWP::Simple::get: it requests the given URL and waits till the data has arrived. It is defined to be:

   sub client_get { $_[0]->txn_client_get ($_[1])->result }

And in fact is automatically generated. This is the blocking API of Net::FCP, and it works as simple as in any other, similar, module.

More complicated is txn_client_get: It only creates a transaction (completion, result, ...) object and initiates the transaction.

   my $txn = bless { }, Net::FCP::Txn::;

It also creates a condition variable that is used to signal the completion of the request:

   $txn->{finished} = AnyAvent->condvar;

It then creates a socket in non-blocking mode.

   socket $txn->{fh}, ...;
   fcntl $txn->{fh}, F_SETFL, O_NONBLOCK;
   connect $txn->{fh}, ...
      and !$!{EWOULDBLOCK}
      and !$!{EINPROGRESS}
      and Carp::croak "unable to connect: $!\n";

Then it creates a write-watcher which gets called whenever an error occurs or the connection succeeds:

   $txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'w', cb => sub { $txn->fh_ready_w });

And returns this transaction object. The fh_ready_w callback gets called as soon as the event loop detects that the socket is ready for writing.

The fh_ready_w method makes the socket blocking again, writes the request data and replaces the watcher by a read watcher (waiting for reply data). The actual code is more complicated, but that doesn't matter for this example:

   fcntl $txn->{fh}, F_SETFL, 0;
   syswrite $txn->{fh}, $txn->{request}
      or die "connection or write error";
   $txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'r', cb => sub { $txn->fh_ready_r });

Again, fh_ready_r waits till all data has arrived, and then stores the result and signals any possible waiters that the request has finished:

   sysread $txn->{fh}, $txn->{buf}, length $txn->{$buf};

   if (end-of-file or data complete) {
     $txn->{result} = $txn->{buf};
     $txn->{finished}->send;
     $txb->{cb}->($txn) of $txn->{cb}; # also call callback
   }

The result method, finally, just waits for the finished signal (if the request was already finished, it doesn't wait, of course, and returns the data:

   $txn->{finished}->recv;
   return $txn->{result};

The actual code goes further and collects all errors (dies, exceptions) that occurred during request processing. The result method detects whether an exception as thrown (it is stored inside the $txn object) and just throws the exception, which means connection errors and other problems get reported tot he code that tries to use the result, not in a random callback.

All of this enables the following usage styles:

1. Blocking:

   my $data = $fcp->client_get ($url);

2. Blocking, but running in parallel:

   my @datas = map $_->result,
                  map $fcp->txn_client_get ($_),
                     @urls;

Both blocking examples work without the module user having to know anything about events.

3a. Event-based in a main program, using any supported event module:

   use EV;

   $fcp->txn_client_get ($url)->cb (sub {
      my $txn = shift;
      my $data = $txn->result;
      ...
   });

   EV::loop;

3b. The module user could use AnyEvent, too:

   use AnyEvent;

   my $quit = AnyEvent->condvar;

   $fcp->txn_client_get ($url)->cb (sub {
      ...
      $quit->send;
   });

   $quit->recv;

BENCHMARKS

To give you an idea of the performance and overheads that AnyEvent adds over the event loops themselves and to give you an impression of the speed of various event loops I prepared some benchmarks.

BENCHMARKING ANYEVENT OVERHEAD

Here is a benchmark of various supported event models used natively and through AnyEvent. The benchmark creates a lot of timers (with a zero timeout) and I/O watchers (watching STDOUT, a pty, to become writable, which it is), lets them fire exactly once and destroys them again.

Source code for this benchmark is found as eg/bench in the AnyEvent distribution.

Explanation of the columns

watcher is the number of event watchers created/destroyed. Since different event models feature vastly different performances, each event loop was given a number of watchers so that overall runtime is acceptable and similar between tested event loop (and keep them from crashing): Glib would probably take thousands of years if asked to process the same number of watchers as EV in this benchmark.

bytes is the number of bytes (as measured by the resident set size, RSS) consumed by each watcher. This method of measuring captures both C and Perl-based overheads.

create is the time, in microseconds (millionths of seconds), that it takes to create a single watcher. The callback is a closure shared between all watchers, to avoid adding memory overhead. That means closure creation and memory usage is not included in the figures.

invoke is the time, in microseconds, used to invoke a simple callback. The callback simply counts down a Perl variable and after it was invoked "watcher" times, it would ->send a condvar once to signal the end of this phase.

destroy is the time, in microseconds, that it takes to destroy a single watcher.

Results

          name watchers bytes create invoke destroy comment
         EV/EV   400000   224   0.47   0.35    0.27 EV native interface
        EV/Any   100000   224   2.88   0.34    0.27 EV + AnyEvent watchers
    CoroEV/Any   100000   224   2.85   0.35    0.28 coroutines + Coro::Signal
      Perl/Any   100000   452   4.13   0.73    0.95 pure perl implementation
   Event/Event    16000   517  32.20  31.80    0.81 Event native interface
     Event/Any    16000   590  35.85  31.55    1.06 Event + AnyEvent watchers
   IOAsync/Any    16000   989  38.10  32.77   11.13 via IO::Async::Loop::IO_Poll
   IOAsync/Any    16000   990  37.59  29.50   10.61 via IO::Async::Loop::Epoll
      Glib/Any    16000  1357 102.33  12.31   51.00 quadratic behaviour
        Tk/Any     2000  1860  27.20  66.31   14.00 SEGV with >> 2000 watchers
     POE/Event     2000  6328 109.99 751.67   14.02 via POE::Loop::Event
    POE/Select     2000  6027  94.54 809.13  579.80 via POE::Loop::Select

Discussion

The benchmark does not measure scalability of the event loop very well. For example, a select-based event loop (such as the pure perl one) can never compete with an event loop that uses epoll when the number of file descriptors grows high. In this benchmark, all events become ready at the same time, so select/poll-based implementations get an unnatural speed boost.

Also, note that the number of watchers usually has a nonlinear effect on overall speed, that is, creating twice as many watchers doesn't take twice the time - usually it takes longer. This puts event loops tested with a higher number of watchers at a disadvantage.

To put the range of results into perspective, consider that on the benchmark machine, handling an event takes roughly 1600 CPU cycles with EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000 CPU cycles with POE.

EV is the sole leader regarding speed and memory use, which are both maximal/minimal, respectively. Even when going through AnyEvent, it uses far less memory than any other event loop and is still faster than Event natively.

The pure perl implementation is hit in a few sweet spots (both the constant timeout and the use of a single fd hit optimisations in the perl interpreter and the backend itself). Nevertheless this shows that it adds very little overhead in itself. Like any select-based backend its performance becomes really bad with lots of file descriptors (and few of them active), of course, but this was not subject of this benchmark.

The Event module has a relatively high setup and callback invocation cost, but overall scores in on the third place.

IO::Async performs admirably well, about on par with Event, even when using its pure perl backend.

Glib's memory usage is quite a bit higher, but it features a faster callback invocation and overall ends up in the same class as Event. However, Glib scales extremely badly, doubling the number of watchers increases the processing time by more than a factor of four, making it completely unusable when using larger numbers of watchers (note that only a single file descriptor was used in the benchmark, so inefficiencies of poll do not account for this).

The Tk adaptor works relatively well. The fact that it crashes with more than 2000 watchers is a big setback, however, as correctness takes precedence over speed. Nevertheless, its performance is surprising, as the file descriptor is dup()ed for each watcher. This shows that the dup() employed by some adaptors is not a big performance issue (it does incur a hidden memory cost inside the kernel which is not reflected in the figures above).

POE, regardless of underlying event loop (whether using its pure perl select-based backend or the Event module, the POE-EV backend couldn't be tested because it wasn't working) shows abysmal performance and memory usage with AnyEvent: Watchers use almost 30 times as much memory as EV watchers, and 10 times as much memory as Event (the high memory requirements are caused by requiring a session for each watcher). Watcher invocation speed is almost 900 times slower than with AnyEvent's pure perl implementation.

The design of the POE adaptor class in AnyEvent can not really account for the performance issues, though, as session creation overhead is small compared to execution of the state machine, which is coded pretty optimally within AnyEvent::Impl::POE (and while everybody agrees that using multiple sessions is not a good approach, especially regarding memory usage, even the author of POE could not come up with a faster design).

Summary

  • Using EV through AnyEvent is faster than any other event loop (even when used without AnyEvent), but most event loops have acceptable performance with or without AnyEvent.

  • The overhead AnyEvent adds is usually much smaller than the overhead of the actual event loop, only with extremely fast event loops such as EV adds AnyEvent significant overhead.

  • You should avoid POE like the plague if you want performance or reasonable memory usage.

BENCHMARKING THE LARGE SERVER CASE

This benchmark actually benchmarks the event loop itself. It works by creating a number of "servers": each server consists of a socket pair, a timeout watcher that gets reset on activity (but never fires), and an I/O watcher waiting for input on one side of the socket. Each time the socket watcher reads a byte it will write that byte to a random other "server".

The effect is that there will be a lot of I/O watchers, only part of which are active at any one point (so there is a constant number of active fds for each loop iteration, but which fds these are is random). The timeout is reset each time something is read because that reflects how most timeouts work (and puts extra pressure on the event loops).

In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100 (1%) are active. This mirrors the activity of large servers with many connections, most of which are idle at any one point in time.

Source code for this benchmark is found as eg/bench2 in the AnyEvent distribution.

Explanation of the columns

sockets is the number of sockets, and twice the number of "servers" (as each server has a read and write socket end).

create is the time it takes to create a socket pair (which is nontrivial) and two watchers: an I/O watcher and a timeout watcher.

request, the most important value, is the time it takes to handle a single "request", that is, reading the token from the pipe and forwarding it to another server. This includes deleting the old timeout and creating a new one that moves the timeout into the future.

Results

     name sockets create  request 
       EV   20000  69.01    11.16 
     Perl   20000  73.32    35.87 
  IOAsync   20000 157.00    98.14 epoll
  IOAsync   20000 159.31   616.06 poll
    Event   20000 212.62   257.32 
     Glib   20000 651.16  1896.30 
      POE   20000 349.67 12317.24 uses POE::Loop::Event

Discussion

This benchmark does measure scalability and overall performance of the particular event loop.

EV is again fastest. Since it is using epoll on my system, the setup time is relatively high, though.

Perl surprisingly comes second. It is much faster than the C-based event loops Event and Glib.

IO::Async performs very well when using its epoll backend, and still quite good compared to Glib when using its pure perl backend.

Event suffers from high setup time as well (look at its code and you will understand why). Callback invocation also has a high overhead compared to the $_->() for ..-style loop that the Perl event loop uses. Event uses select or poll in basically all documented configurations.

Glib is hit hard by its quadratic behaviour w.r.t. many watchers. It clearly fails to perform with many filehandles or in busy servers.

POE is still completely out of the picture, taking over 1000 times as long as EV, and over 100 times as long as the Perl implementation, even though it uses a C-based event loop in this case.

Summary

  • The pure perl implementation performs extremely well.

  • Avoid Glib or POE in large projects where performance matters.

BENCHMARKING SMALL SERVERS

While event loops should scale (and select-based ones do not...) even to large servers, most programs we (or I :) actually write have only a few I/O watchers.

In this benchmark, I use the same benchmark program as in the large server case, but it uses only eight "servers", of which three are active at any one time. This should reflect performance for a small server relatively well.

The columns are identical to the previous table.

Results

    name sockets create request 
      EV      16  20.00    6.54 
    Perl      16  25.75   12.62 
   Event      16  81.27   35.86 
    Glib      16  32.63   15.48 
     POE      16 261.87  276.28 uses POE::Loop::Event

Discussion

The benchmark tries to test the performance of a typical small server. While knowing how various event loops perform is interesting, keep in mind that their overhead in this case is usually not as important, due to the small absolute number of watchers (that is, you need efficiency and speed most when you have lots of watchers, not when you only have a few of them).

EV is again fastest.

Perl again comes second. It is noticeably faster than the C-based event loops Event and Glib, although the difference is too small to really matter.

POE also performs much better in this case, but is is still far behind the others.

Summary

  • C-based event loops perform very well with small number of watchers, as the management overhead dominates.

THE IO::Lambda BENCHMARK

Recently I was told about the benchmark in the IO::Lambda manpage, which could be misinterpreted to make AnyEvent look bad. In fact, the benchmark simply compares IO::Lambda with POE, and IO::Lambda looks better (which shouldn't come as a surprise to anybody). As such, the benchmark is fine, and mostly shows that the AnyEvent backend from IO::Lambda isn't very optimal. But how would AnyEvent compare when used without the extra baggage? To explore this, I wrote the equivalent benchmark for AnyEvent.

The benchmark itself creates an echo-server, and then, for 500 times, connects to the echo server, sends a line, waits for the reply, and then creates the next connection. This is a rather bad benchmark, as it doesn't test the efficiency of the framework or much non-blocking I/O, but it is a benchmark nevertheless.

   name                    runtime
   Lambda/select           0.330 sec
      + optimized          0.122 sec
   Lambda/AnyEvent         0.327 sec
      + optimized          0.138 sec
   Raw sockets/select      0.077 sec
   POE/select, components  0.662 sec
   POE/select, raw sockets 0.226 sec
   POE/select, optimized   0.404 sec

   AnyEvent/select/nb      0.085 sec
   AnyEvent/EV/nb          0.068 sec
      +state machine       0.134 sec

The benchmark is also a bit unfair (my fault): the IO::Lambda/POE benchmarks actually make blocking connects and use 100% blocking I/O, defeating the purpose of an event-based solution. All of the newly written AnyEvent benchmarks use 100% non-blocking connects (using AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS resolver), so AnyEvent is at a disadvantage here, as non-blocking connects generally require a lot more bookkeeping and event handling than blocking connects (which involve a single syscall only).

The last AnyEvent benchmark additionally uses AnyEvent::Handle, which offers similar expressive power as POE and IO::Lambda, using conventional Perl syntax. This means that both the echo server and the client are 100% non-blocking, further placing it at a disadvantage.

As you can see, the AnyEvent + EV combination even beats the hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl backend easily beats IO::Lambda and POE.

And even the 100% non-blocking version written using the high-level (and slow :) AnyEvent::Handle abstraction beats both POE and IO::Lambda by a large margin, even though it does all of DNS, tcp-connect and socket I/O in a non-blocking way.

The two AnyEvent benchmarks programs can be found as eg/ae0.pl and eg/ae2.pl in the AnyEvent distribution, the remaining benchmarks are part of the IO::lambda distribution and were used without any changes.

SIGNALS

AnyEvent currently installs handlers for these signals:

SIGCHLD

A handler for SIGCHLD is installed by AnyEvent's child watcher emulation for event loops that do not support them natively. Also, some event loops install a similar handler.

If, when AnyEvent is loaded, SIGCHLD is set to IGNORE, then AnyEvent will reset it to default, to avoid losing child exit statuses.

SIGPIPE

A no-op handler is installed for SIGPIPE when $SIG{PIPE} is undef when AnyEvent gets loaded.

The rationale for this is that AnyEvent users usually do not really depend on SIGPIPE delivery (which is purely an optimisation for shell use, or badly-written programs), but SIGPIPE can cause spurious and rare program exits as a lot of people do not expect SIGPIPE when writing to some random socket.

The rationale for installing a no-op handler as opposed to ignoring it is that this way, the handler will be restored to defaults on exec.

Feel free to install your own handler, or reset it to defaults.

FORK

Most event libraries are not fork-safe. The ones who are usually are because they rely on inefficient but fork-safe select or poll calls. Only EV is fully fork-aware.

If you have to fork, you must either do so before creating your first watcher OR you must not use AnyEvent at all in the child.

SECURITY CONSIDERATIONS

AnyEvent can be forced to load any event model via $ENV{PERL_ANYEVENT_MODEL}. While this cannot (to my knowledge) be used to execute arbitrary code or directly gain access, it can easily be used to make the program hang or malfunction in subtle ways, as AnyEvent watchers will not be active when the program uses a different event model than specified in the variable.

You can make AnyEvent completely ignore this variable by deleting it before the first watcher gets created, e.g. with a BEGIN block:

   BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
  
   use AnyEvent;

Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can be used to probe what backend is used and gain other information (which is probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and $ENV{PERL_ANYEVENT_STRICT}.

Note that AnyEvent will remove all environment variables starting with PERL_ANYEVENT_ from %ENV when it is loaded while taint mode is enabled.

BUGS

Perl 5.8 has numerous memleaks that sometimes hit this module and are hard to work around. If you suffer from memleaks, first upgrade to Perl 5.10 and check wether the leaks still show up. (Perl 5.10.0 has other annoying memleaks, such as leaking on map and grep but it is usually not as pronounced).

SEE ALSO

Utility functions: AnyEvent::Util.

Event modules: EV, EV::Glib, Glib::EV, Event, Glib::Event, Glib, Tk, Event::Lib, Qt, POE.

Implementations: AnyEvent::Impl::EV, AnyEvent::Impl::Event, AnyEvent::Impl::Glib, AnyEvent::Impl::Tk, AnyEvent::Impl::Perl, AnyEvent::Impl::EventLib, AnyEvent::Impl::Qt, AnyEvent::Impl::POE.

Non-blocking file handles, sockets, TCP clients and servers: AnyEvent::Handle, AnyEvent::Socket.

Asynchronous DNS: AnyEvent::DNS.

Coroutine support: Coro, Coro::AnyEvent, Coro::EV, Coro::Event,

Nontrivial usage examples: Net::FCP, Net::XMPP2, AnyEvent::DNS.

AUTHOR

   Marc Lehmann <schmorp@schmorp.de>
   http://home.schmorp.de/