Catalyst::Manual::Installation::CentOS4 - Catalyst Installation on CentOS 4
This document provides directions on how to install CentOS 4 (a rebuild of RedHat Enterprise 4) and then install Catalyst.
If you already have a functioning install of CentOS, RHEL, or a comparable Linux OS, you should be able to skip this first section and go straight to the
INSTALL CATALYST section.
NOTE: You might want to consult the latest version of this document. It is available at: http://dev.catalyst.perl.org/repos/Catalyst/trunk/Catalyst-Runtime/lib/Catalyst/Manual/Installation/CentOS4.pod
These directions are written for CentOS 4.4 on an i386 machine; however, you can substitute other versions as they become available.
Go to http://isoredirect.centos.org/centos/4/isos/i386/ and click the nearest mirror.
CentOS-4.4-i386-bin1of4.iso(you only need the first disk).
Burn the .iso to CD.
Insert the CD into your machine and power it up.
CD media test: you can either select
Skipdepending on whether or not you trust your burn.
The installation GUI should start. Click next at the "Welcome to CentOS-4" screen.
Select a language and click
Select a keyboard configuration and click
Customfor the installation type and click
Automatically partitionselected on the
Disk Partitioning Setupand click
Review (and modify if needed) the partitions created, but leave the rest of the default settings on the
Automatic Partitioningscreen. Then click
Are you sure you want to do this?warning.
Boot Loader Configurationscreen.
Network Configurationscreen as necessary and click
Remote Login (SSH)and click
Select additional languages as necessary. Click
Select the appropriate time zone and click
Enter a root password and click
Scroll to the bottom of the
Package Group Selectionscreen and check
Minimal(the last option). Click
About to Installscreen.
The installation will prepare the hard drive and then install the required rpm packages.
Once the installation completes, remove the CD and click
vi /etc/sysconfig/iptablesand add the following line as the third to last line of the file (above the
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibitedline):
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 3000 -j ACCEPT
This will allow Catalyst to make use of port 3000 (the default for the development server).
service iptables restartto restart the iptables firewall using the updated configuration.
yum -y updateto retrieve the latest patches.
yum -y install gcc expat-devel sqlite3to install several packages used by Catalyst.
Type the following:
$ perl -MCPAN -e shell ... Are you ready for manual configuration? [yes] yes The following questions are intended to help you with the ... cpan shell -- CPAN exploration and modules installation (v1.7601) ReadLine support available (try 'install Bundle::CPAN') cpan> force install Module::Build ... cpan> quit
Note: You need to have CPAN manually configured prior to running cat-install. As shown above, you should automatically receive a prompt for this when you first run
perl -MCPAN -e shell. You can re-run the configuration script by typing
o conf initat the
Optional: The remaining steps of the installation could run significantly faster if you configure a fast mirror that uses HTTP vs. FTP (both transfer data at the same rate once the transfer is in progress, but HTTP connects much more quickly... and a Catalyst installation involves many connections). If you want to change the selection(s) you made during the "manual configuration" process above, you can manually add a single URL. To prepend a new URL to the front of the list, use the
cpan> o conf urllist unshift http://www.perl.com/CPAN/
http://www.perl.com/CPAN/is replaced by a nearby, HTTP-based mirror. You can get a list of all mirrors (including where they are located, their bandwidth, and their update frequency) at http://www.perl.com/CPAN/MIRRORED.BY.
Then, be sure to save your changes (or they will be lost the next time you restart the CPAN shell):
cpan> o conf commit
You can view the current settings with
o conf urllist(or just
o confto view all settings):
cpan> o conf urllist urllist http://www.perl.com/CPAN/ Type 'o conf' to view configuration edit options
Note that multiple values can be entered for the
urllistoption (the first entry will be used as long as it responds).
cat-installdocumentation from the http://www.shadowcatsystems.co.uk web site:
If you want to get started quickly with Catalyst, Shadowcat provides an installer script that will automate most of the process of installing it for you. Please bear in mind that this script is currently considered beta quality; we don't think it will eat your system but we make no guarantee of that. First, you'll need - * Perl, 5.8.1+ (if you're on windows, get it from Active State) * make of some sort. On unix/linux you should already have one. On windows get nmake from Microsoft. * A compiler. On unix/linux you should already have one. On windows, get the latest Dev-C++ beta. * All three of the above in your PATH for whatever shell you're using * A configured CPAN.pm. perl -MCPAN -e shell should get CPAN to walk you through the configuration process * Module::Build. Active State kindly include this for you. Ok, now that your environment is set up, download the installer from this link, open a command prompt in the directory you downloaded it to and run perl cat-install. By the time it exits, you should have a full Catalyst install. If anything goes wrong, please send the full build log and the output of perl -V to cat-install (at) shadowcatsystems.co.uk so we can try and resolve your issue.
wget http://www.shadowcatsystems.co.uk/static/cat-installto retrieve a copy of the
vi cat-installto open the installer script, then insert the following lines at the bottom of the file (after the
install('ExtUtils::ParseXS'); install('Digest::SHA1'); install('Digest::SHA'); install('DBIx::Class'); install('DBIx::Class::HTMLWidget'); install('Module::ScanDeps'); install('Module::CoreList'); install('PAR::Dist'); install('Archive::Tar'); install('Module::Install'); install('Catalyst::Devel'); install('Catalyst::Plugin::ConfigLoader'); install('Catalyst::Plugin::Session'); install('Catalyst::Plugin::Session::State::Cookie'); install('Catalyst::Plugin::Session::Store::FastMmap'); install('Catalyst::Plugin::Authorization::ACL'); install('Catalyst::Plugin::Authentication'); install('Catalyst::Plugin::Authorization::Roles'); install('Catalyst::Plugin::Authentication::Store::DBIC'); install('Catalyst::Plugin::DefaultEnd'); install('Catalyst::Plugin::StackTrace'); install('Catalyst::Plugin::Dumper'); install('Catalyst::Plugin::HTML::Widget'); install('Catalyst::Model::DBIC::Schema'); install('Catalyst::View::TT'); install('Test::WWW::Mechanize'); install('Test::WWW::Mechanize::Catalyst'); install('Test::Pod'); install('Test::Pod::Coverage');
perl cat-install. It will take a while to complete.
Tip: You may want to enable logging of the output that
cat-installgenerates as it runs -- it can be useful if you need to troubleshoot a failure. The log will generate almost 1 MB of output.
Note: Once the
perl cat-installis complete, you may want to rerun the command to check the status of the packages listed in <cat-install>. Ideally, everything should return a name
is up to datemessage. If any packages try to re-install, the you could need to manually install the package with the
forceoption. Also, look for new optional dependences that
cat-installwas not able to automatically handle. You can address these by manually installing the dependency and then re-running
In some cases you may wish to install an earlier version of a module. For example, say that the latest version of Module::Install is 0.64 and you want to install 0.63. The following command under
perl -MCPAN -e shell:
cpan> install A/AD/ADAMK/Module-Install-0.63.tar.gz
You should now have a functioning Catalyst installation with the modules and plugins required to run the Catalyst tutorial.
TESTING THE INSTALLATION
Download the tarball of the final tutorial application:
$ wget http://dev.catalyst.perl.org/repos/Catalyst/trunk/examples/Tutorial/Final_Tarball/MyApp.tgz
$ tar zxvf MyApp.tgz $ cd MyApp
Run the tests:
$ CATALYST_DEBUG=0 prove --lib lib t t/02pod...............skipped all skipped: set TEST_POD to enable this test t/03podcoverage.......skipped all skipped: set TEST_POD to enable this test t/01app...............ok t/controller_Login....ok t/live_app01..........ok 1/0[debug] ***Root::auto User not found, forwarding to /login t/live_app01..........ok 2/0[debug] ***Root::auto User not found, forwarding to /login t/live_app01..........ok 15/0[debug] ***Root::auto User not found, forwarding to /login t/live_app01..........ok 16/0[debug] ***Root::auto User not found, forwarding to /login t/live_app01..........ok t/model_MyAppDB.......ok All tests successful, 2 tests skipped. Files=6, Tests=55, 11 wallclock secs ( 4.68 cusr + 4.84 csys = 9.52 CPU)
You should see
All tests successful.
Please report any errors, issues or suggestions to the author. The most recent version of the Catalyst Tutorial can be found at http://dev.catalyst.perl.org/repos/Catalyst/trunk/Catalyst-Runtime/lib/Catalyst/Manual/Tutorial/.
Copyright 2006, Kennedy Clark, under Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/2.5/).