NAME

Catalyst::Manual::Tutorial::CatalystBasics - Catalyst Tutorial - Part 2: Catalyst Application Development Basics

OVERVIEW

This is Part 2 of 9 for the Catalyst tutorial.

DESCRIPTION

In this part of the tutorial, we will create a very basic Catalyst web application. Though simple in many respects, this section will already demonstrate a number of powerful capabilities such as:

Helper Scripts

Catalyst helper scripts that can be used to rapidly bootstrap the skeletal structure of an application.
MVC

Model/View/Controller (MVC) provides an architecture that facilitates a clean "separation of control" between the different portions of your application. Given that many other documents cover this subject in detail, MVC will not be discussed in depth here (for an excellent introduction to MVC and general Catalyst concepts, please see Catalyst::Manual::About. In short:
- Model
  
  The model usually represents a data store. In most applications, the model equates to the objects that are created from and saved to your SQL database.
- View
  
  The view takes model objects and renders them into something for the end user to look at. Normally this involves a template-generation tool that creates HTML for the user's web browser, but it could easily be code that generates other forms such as PDF documents, e-mails, or Excel spreadsheets.
- Controller
  
  As suggested by its name, the controller takes user requests and routes them to the necessary model and view.
ORM

The use of Object-Relational Mapping (ORM) technology for database access. Specifically, ORM provides an automated and standardized means to persist and restore objects to/from a relational database.

TIP: Note that all of the code for this part of the tutorial can be pulled from the Catalyst Subversion repository in one step with the following command:

    svn checkout http://dev.catalyst.perl.org/repos/Catalyst/trunk/examples/Tutorial@###
    IMPORTANT: Does not work yet.  Will be completed for final version.

CREATE A CATALYST PROJECT

Catalyst provides a number of helper scripts that can be used to quickly flesh out the basic structure of your application. All Catalyst projects begin with the catalyst.pl helper.

In the case of this tutorial, use the Catalyst catalyst.pl script to initialize the framework for an application called MyApp:

    $ catalyst.pl MyApp
    $ cd MyApp

The catalyst.pl helper script will display the names of the directories and files it creates.

Though it's too early for any significant celebration, we already have a functioning application. Run the following command to run this application with the built-in development web server:

        $ script/myapp_server.pl

Point your web browser to http://localhost:3000 (substituting a different hostname or IP address as appropriate) and you should be greeted by the Catalyst welcome screen. Press Ctrl-C to break out of the development server.

CREATE A SQLITE DATABASE

In this step, we make a text file with the required SQL commands to create a database table and load some sample data. Open myapp01.sql in your editor and enter:

    --
    -- Create a very simple database to hold book and author information
    --
    CREATE TABLE books (
            id          INTEGER PRIMARY KEY,
            title       TEXT ,
            rating      INTEGER
    );
    -- 'book_authors' is a many-to-many join table between books & authors
    CREATE TABLE book_authors (
            book_id     INTEGER,
            author_id   INTEGER,
            PRIMARY KEY (book_id, author_id)
    );
    CREATE TABLE authors (
            id          INTEGER PRIMARY KEY,
            first_name  TEXT,
            last_name   TEXT
    );
    ---
    --- Load some sample data
    ---
    INSERT INTO books VALUES (1, 'CCSP SNRS Exam Certification Guide', 5);
    INSERT INTO books VALUES (2, 'TCP/IP Illustrated, Volume 1', 5);
    INSERT INTO books VALUES (3, 'Internetworking with TCP/IP Vol.1', 4);
    INSERT INTO books VALUES (4, 'Perl Cookbook', 5);
    INSERT INTO books VALUES (5, 'Designing with Web Standards', 5);
    INSERT INTO authors VALUES (1, 'Greg', 'Bastien');
    INSERT INTO authors VALUES (2, 'Sara', 'Nasseh');
    INSERT INTO authors VALUES (3, 'Christian', 'Degu');
    INSERT INTO authors VALUES (4, 'Richard', 'Stevens');
    INSERT INTO authors VALUES (5, 'Douglas', 'Comer');
    INSERT INTO authors VALUES (6, 'Tom', 'Christiansen');
    INSERT INTO authors VALUES (7, ' Nathan', 'Torkington');
    INSERT INTO authors VALUES (8, 'Jeffrey', 'Zeldman');
    INSERT INTO book_authors VALUES (1, 1);
    INSERT INTO book_authors VALUES (1, 2);
    INSERT INTO book_authors VALUES (1, 3);
    INSERT INTO book_authors VALUES (2, 4);
    INSERT INTO book_authors VALUES (3, 5);
    INSERT INTO book_authors VALUES (4, 6);
    INSERT INTO book_authors VALUES (4, 7);
    INSERT INTO book_authors VALUES (5, 8);

TIP: See Appendix 1 for tips on removing the leading spaces when cutting and pasting example code from POD documents.

Then use the following command to build a myapp.db SQLite database:

    $ sqlite3 myapp.db < myapp01.sql

If you need to create the database more than once, you probably want to issue the rm myapp.db command to delete the database before you use the sqlite3 myapp.db < myapp01.sql command.

Once the myapp.db database file has been created and initialized, you can use the SQLite command line environment to do a quick dump of the database contents:

    $ sqlite3 myapp.db
    SQLite version 3.2.2
    Enter ".help" for instructions
    sqlite> select * from books;
    1|CCSP SNRS Exam Certification Guide|5
    2|TCP/IP Illustrated, Volume 1|5
    3|Internetworking with TCP/IP Vol.1|4
    4|Perl Cookbook|5
    5|Designing with Web Standards|5
    sqlite> .q
    $

Or:

    $ sqlite3 myapp.db "select * from books"
    1|CCSP SNRS Exam Certification Guide|5
    2|TCP/IP Illustrated, Volume 1|5
    3|Internetworking with TCP/IP Vol.1|4
    4|Perl Cookbook|5
    5|Designing with Web Standards|5

As with most other SQL tools, if you are using the full "interactive" environment you need to terminate your SQL commands with a ";" (it's not required if you do a single SQL statement on the command line). Use ".q" to exit from SQLite from the SQLite interactive mode and return to your OS command prompt.

EDIT THE LIST OF CATALYST PLUGINS

One of the greatest benefits of Catalyst is that it has such a large library of plugins available. Plugins are used to seamlessly integrate existing Perl modules into the overall Catalyst framework. In general, they do this by adding additional methods to the context object (generally written as $c) that Catalyst passes to every component throughout the framework.

By default, Catalyst enables three plugins/flags:

-Debug Flag

Enables the Catalyst debug output you saw when we started the script/myapp_server.pl development server earlier. You can remove this plugin when you place your application into production.

As you may have noticed, -Debug is not a plugin, but a flag. Although most of the items specified on the use Catalyst line of your application class will be plugins, Catalyst supports a limited number of flag options (of these, -Debug is the most common). See the documentation for Catalyst.pm to get details on other flags (currently -Engine, -Home, and -Log).

If you prefer, you can use the $c->debug method to enable debug messages.
Catalyst::Plugin::ConfigLoader

ConfigLoader provides an automatic way to load configurable parameters for your application from a central YAML file (versus having the values hard-coded inside your Perl modules). If you have not been exposed to YAML before, it is a human-readable data serialization format that can be used to read (and write) values to/from text files. We will see how to use this feature of Catalyst during the authentication and authorization sections (Part 4 and Part 5).
Catalyst::Plugin::Static::Simple

Static::Simple provides an easy method of serving static content such as images and CSS files under the development server.

To modify the list of plugins, edit lib/MyApp.pm (this file is generally referred to as your application class) and delete the line with:

    use Catalyst qw/-Debug ConfigLoader Static::Simple/;

Replace it with:

    use Catalyst qw/
            -Debug
            ConfigLoader
            Static::Simple
            
            StackTrace
            DefaultEnd
            /;

This tells Catalyst to start using two new plugins:

Catalyst::Plugin::StackTrace

Adds a stack trace to the standard Catalyst "debug screen" (this is the screen Catalyst sends to your browser when an error occurs).

Note: StackTrace output appears in your browser, not in the console window from which you're running your application, which is where logging output usually goes.
Catalyst::Plugin::DefaultEnd

Automatically provides a Catalyst "end action" that invokes your view at the end of each request. Also allows you to add "dump_info=1" (precede with "?" or "&" depending on where it is in the URL) to force the debug screen at the end of the Catalyst request processing cycle.

TIP: Many Catalyst-related documents predate DefaultEnd and suggest that you add an end action to your application class (MyApp.pm) or Root.pm (MyApp/Controller/Root.pm). In most of these cases, you can convert to DefaultEnd by deleting the end action and using the plugin instead. There are certainly cases when you'd want to write your own custom end action, but for most circumstances, DefaultEnd will be exactly what you want.

Note that when specifying plugins on the use Catalyst line, you can omit Catalyst::Plugin:: from the name. Additionally, you can spread the plugin names across multiple lines as shown here, or place them all on one (or more) lines as with the default configuration.

DATABASE ACCESS WITH `DBIx::Class`

Catalyst can be used with virtually any form of persistent datastore available via Perl. For example, Catalyst::Model::DBI can be used to easily access databases through the traditional Perl DBI interface. However, most Catalyst applications use some form of ORM technology to automatically create and save model objects as they are used. Although Tony Bowden's Class::DBI has been the traditional Perl ORM engine, Matt Trout's DBIx::Class (abbreviated as "DBIC") has rapidly emerged as the Perl-based ORM technology of choice. Most new Catalyst applications rely on DBIC, as will this tutorial.

Note: See "Catalyst:: Model::CDBI" for more information on using Catalyst with Class::DBI.

Create a DBIC Schema File

DBIx::Class uses a schema file to load other classes that represent the tables in your database (DBIC refers to these "table objects" as "result sources"; see DBIx::Class::ResultSource). In this case, we want to load the model object for the books, book_authors, and authors tables created in the previous step.

Open lib/MyAppDB.pm in your editor and insert:

    package MyAppDB;
    
    =head1 NAME 
    
    MyAppDB - DBIC Schema Class
    
    =cut
    
    # Our schema needs to inherit from 'DBIx::Class::Schema'
    use base qw/DBIx::Class::Schema/;
    
    # Need to load the DB Model classes here.
    # You can use this syntax if you want:
    #    __PACKAGE__->load_classes(qw/Book BookAuthor Author/);
    # Also, if you simply want to load all of the classes in a directory
    # of the same name as your schema class (as we do here) you can use:
    #    __PACKAGE__->load_classes(qw//);
    # But the variation below is more flexible in that it can be used to 
    # load from multiple namespaces.
    __PACKAGE__->load_classes({
        MyAppDB => [qw/Book BookAuthor Author/]
    });
    
    1;

Note: __PACKAGE__ is just a shorthand way of referencing the name of the package where it is used. Therefore, in MyAppDB.pm, __PACKAGE__ is equivalent to MyAppDB.

Create the DBIC "Result Source" Files

In this step, we create "table classes" (again, these are called a "result source" classes in DBIC) that act as model objects for the books, book_authors, and authors tables in our database.

First, create a directory to hold the class:

    $ mkdir lib/MyAppDB

Then open lib/MyAppDB/Book.pm in your editor and enter:

    package MyAppDB::Book;
    
    use base qw/DBIx::Class/;  
    
    # Load required DBIC stuff
    __PACKAGE__->load_components(qw/PK::Auto Core/);
    # Set the table name
    __PACKAGE__->table('books');
    # Set columns in table
    __PACKAGE__->add_columns(qw/id title rating/);
    # Set the primary key for the table
    __PACKAGE__->set_primary_key(qw/id/);
    
    #
    # Set relationships:
    #
    
    # has_many():
    #   args:
    #     1) Name of relationship, DBIC will create accessor with this name
    #     2) Name of the model class referenced by this relationship
    #     3) Column name in *foreign* table
    __PACKAGE__->has_many(book_authors => 'MyAppDB::BookAuthor', 'book_id');
    
    # many_to_many():
    #   args:
    #     1) Name of relationship, DBIC will create accessor with this name
    #     2) Name of has_many() relationship this many_to_many() is shortcut for
    #     3) Name of belongs_to() relationship in model class of has_many() above 
    #   You must already have the has_many() defined to use a many_to_many().
    __PACKAGE__->many_to_many(authors => 'book_authors', 'author');
    
    
    =head1 NAME
    
    MyAppDB::Book - A model object representing a book.
    
    =head1 DESCRIPTION
    
    This is an object that represents a row in the 'books' table of your application
    database.  It uses DBIx::Class (aka, DBIC) to do ORM.
    
    For Catalyst, this is designed to be used through MyApp::Model::MyAppDB.
    Offline utilities may wish to use this class directly.
    
    =cut
    
    1;

This defines both a has_many and a many_to_many relationship. The many_to_many relationship is optional, but it makes it easier to map a book to its collection of authors. Without it, we would have to "walk" though the book_authors table as in $book->book_authors->first->author->last_name (we will see examples on how to use DBIC objects in your code soon, but note that because $book->book_authors can return multiple authors, we have to use first to display a single author). many_to_many allows us to use the shorter $book->authors->first->last_name. Note that you cannot define a many_to_many relationship without also having the has_many relationship in place.

Next, open lib/MyAppDB/Author.pm in your editor and enter:

    package MyAppDB::Author;
    
    use base qw/DBIx::Class/;
    
    # Load required DBIC stuff
    __PACKAGE__->load_components(qw/PK::Auto Core/);
    # Set the table name
    __PACKAGE__->table('authors');
    # Set columns in table
    __PACKAGE__->add_columns(qw/id first_name last_name/);
    # Set the primary key for the table
    __PACKAGE__->set_primary_key(qw/id/);

    #
    # Set relationships:
    #
    
    # has_many():
    #   args:
    #     1) Name of relationship, DBIC will create accessor with this name
    #     2) Name of the model class referenced by this relationship
    #     3) Column name in *foreign* table
    __PACKAGE__->has_many(book_author => 'MyAppDB::BookAuthor', 'author_id');
    
    # many_to_many():
    #   args:
    #     1) Name of relationship, DBIC will create accessor with this name
    #     2) Name of has_many() relationship this many_to_many() is shortcut for
    #     3) Name of belongs_to() relationship in model class of has_many() above 
    #   You must already have the has_many() defined to use a many_to_many().
    __PACKAGE__->many_to_many(books => 'book_author', 'book');
    
    
    =head1 NAME
    
    MyAppDB::Author - A model object representing an author of a book (if a book has 
    multiple authors, each will be represented be separate Author object).
    
    =head1 DESCRIPTION
    
    This is an object that represents a row in the 'authors' table of your application
    database.  It uses DBIx::Class (aka, DBIC) to do ORM.
    
    For Catalyst, this is designed to be used through MyApp::Model::MyAppDB.
    Offline utilities may wish to use this class directly.
    
    =cut
    
    1;

Finally, open lib/MyAppDB/BookAuthor.pm in your editor and enter:

    package MyAppDB::BookAuthor;
    
    use base qw/DBIx::Class/;
    
    # Load required DBIC stuff
    __PACKAGE__->load_components(qw/PK::Auto Core/);
    # Set the table name
    __PACKAGE__->table('book_authors');
    # Set columns in table
    __PACKAGE__->add_columns(qw/book_id author_id/);
    # Set the primary key for the table
    __PACKAGE__->set_primary_key(qw/book_id author_id/);
    
    #
    # Set relationships:
    #
    
    # belongs_to():
    #   args:
    #     1) Name of relationship, DBIC will create accessor with this name
    #     2) Name of the model class referenced by this relationship
    #     3) Column name in *this* table
    __PACKAGE__->belongs_to(book => 'MyAppDB::Book', 'book_id');

    # belongs_to():
    #   args:
    #     1) Name of relationship, DBIC will create accessor with this name
    #     2) Name of the model class referenced by this relationship
    #     3) Column name in *this* table
    __PACKAGE__->belongs_to(author => 'MyAppDB::Author', 'author_id');
    
    
    =head1 NAME
    
    MyAppDB::BookAuthor - A model object representing the JOIN between an author and 
    a book.
    
    =head1 DESCRIPTION
    
    This is an object that represents a row in the 'book_authors' table of your 
    application database.  It uses DBIx::Class (aka, DBIC) to do ORM.

    You probably won't need to use this class directly -- it will be automatically
    used by DBIC where joins are needed.
    
    For Catalyst, this is designed to be used through MyApp::Model::MyAppDB.
    Offline utilities may wish to use this class directly.
    
    =cut
    
    1;

Note: This sample application uses a plural form for the database tables (e.g., books and authors) and a singular form for the model objects (e.g., Book and Author); however, Catalyst places no restrictions on the naming conventions you wish to use.

Use `Catalyst::Model::DBIC::Schema` To Load The Model Class

When Catalyst::Model::DBIC::Schema is in use, Catalyst essentially reads an existing copy of your database model and creates a new set of objects under MyApp::Model for use inside of Catalyst.

Note: With Catalyst::Model::DBIC::Schema you essentially end up with two sets of model classes (only one of which you write... the other set is created automatically in memory when your Catalyst application initializes). For this tutorial application, the important points to remember are: you write the result source files in MyAppDB, but within Catalyst you use the automatically created model classes in MyApp::Model.

Use the Catalyst::Helper::Model::DBIC::Schema helper script to create the model class that loads up the model we created in the previous step:

    $ script/myapp_create.pl model MyAppDB DBIC::Schema MyAppDB dbi:SQLite:myapp.db '' '' '{ AutoCommit => 1 }'

Where the first MyAppDB is the name of the class to be created by the helper in lib/MyApp/Model and the second MyAppDB is the name of existing schema file we created (in lib/MyAppDB.pm). You can see that the helper creates a model file under lib/MyApp/Model (Catalyst has a separate directory under lib/MyApp for each of the three parts of MVC: Model, View, and Controller [although older Catalyst applications often use the directories M, V, and C]).

CREATE A CATALYST CONTROLLER

Controllers are where you write methods that interact with user input--typically, controller methods respond to GET and POST messages from the user's web browser.

Use the Catalyst create script to add a controller for book-related actions:

    $ script/myapp_create.pl controller Books

Then edit lib/MyApp/Controller/Books.pm and add the following method to the controller:

    =head2 list
    
    Fetch all book objects and pass to books/list.tt2 in stash to be displayed
    
    =cut
     
    sub list : Local {
        # Retrieve the usual perl OO '$self' for this object. $c is the Catalyst
        # 'Context' that's used to 'glue together' the various components
        # that make up the application
        my ($self, $c) = @_;
    
        # Retrieve all of the book records as book model objects and store in the
        # stash where they can be accessed by the TT template
        $c->stash->{books} = [$c->model('MyAppDB::Book')->all];
        
        # Set the TT template to use.  You will almost always want to do this
        # in your action methods.
        $c->stash->{template} = 'books/list.tt2';
    }

Note: Programmers experienced with object-oriented Perl should recognize $self as a reference to the object where this method was called. On the other hand, $c will be new to many Perl programmers who have not used Catalyst before (it's sometimes written as $context). The Context object is automatically passed to all Catalyst components. It is used to pass information between components and provide access to Catalyst and plugin functionality.

TIP: You may see the $c->model('MyAppDB::Book') used above written as $c->model('MyAppDB')->resultset('Book). The two are equivalent.

Note: Catalyst actions are regular Perl methods, but they make use of Nicholas Clark's attributes module (that's the : Local next to the sub list in the code above) to provide additional information to the Catalyst dispatcher logic.

CATALYST VIEWS

Views are where you render output, typically for display in the user's web browser, but also possibly using other display output-generation systems. As with virtually every aspect of Catalyst, options abound when it comes to the specific view technology you adopt inside your application. However, most Catalyst applications use the Template Toolkit, known as TT (for more information on TT, see http://www.template-toolkit.org). Other popular View technologies include Mason (http://www.masonhq.com and http://www.masonbook.com) and HTML::Template (http://html-template.sourceforge.net).

Create a Catalyst View Using `TTSITE`

When using TT for the Catalyst view, there are two main helper scripts:

Both are similar, but TT merely creates the lib/MyApp/View/TT.pm file and leaves the creation of any hierarchical template organization entirely up to you. (It also creates a t/view_TT.t file for testing; test cases will be discussed in Part 7). The TTSite helper creates a modular and hierarchical view layout with separate Template Toolkit (TT) files for common header and footer information, configuration values, a CSS stylesheet, and more.

Enter the following command to enable the TTSite style of view rendering for this tutorial:

    $ script/myapp_create.pl view TT TTSite

This puts a number of files in the root/lib and root/src directories that can be used to customize the look and feel of your application. Also take a look at lib/MyApp/View/TT.pm for config values set by the TTSite helper.

TIP: Note that TTSite does one thing that could confuse people who are used to the normal TT Catalyst View: it redefines the Catalyst context object in templates from its usual c to Catalyst. When looking at other Catalyst examples, remember that they almost always use c. Note that Catalyst and TT do not complain when you use the wrong name to access the context object...TT simply outputs blanks for that bogus logic (see next tip to change this behavior with TT DEBUG options). Finally, be aware that this change in name only applies to how the context object is accessed inside your TT templates; your controllers will continue to use $c (or whatever name you use when fetching the reference from @_ inside your methods). (You can change back to the "default" behavior be removing the CATALYST_VAR line from lib/MyApp/View/TT.pm, but you will also have to edit root/lib/config/main and root/lib/config/url. If you do this, be careful not to have a collision between your own c variable and the Catalyst c variable.)

TIP: When troubleshooting TT it can be helpful to enable variable DEBUG options. You can do this in a Catalyst environment by adding a DEBUG line to the __PACKAGE__-config> declaration in MyApp/View/TT.pm:

    __PACKAGE__->config({
        CATALYST_VAR => 'Catalyst',
        ...
        DEBUG        => 'undef',
        ...
    });

There are a variety of options you can use, such as 'undef', 'all', 'service', 'context', 'parser', 'provider', and 'service'. See Template::Constants for more information (remove the DEBUG_ portion of the name shown in the TT docs and convert to lower case for use inside Catalyst).

Globally Customize Every View

When using TTSite, files in the subdirectories of root/lib can be used to make changes that will appear in every view. For example, to display optional status and error messages in every view, edit root/lib/site/layout, updating it to match the following (the two HTML span elements are new):

    <div id="header">[% PROCESS site/header %]</div>
    
    <div id="content">
    <span class="message">[% status_msg %]</span>
    <span class="error">[% error_msg %]</span>
    [% content %]
    </div>
    
    <div id="footer">[% PROCESS site/footer %]</div>

If we set either message in the Catalyst stash (e.g., $c->stash->{status_msg} = 'Request was successful!') it will be displayed whenever any view used by that request is rendered. The message and error CSS styles are automatically defined in root/src/ttsite.css and can be customized to suit your needs.

Note: The Catalyst stash only lasts for a single HTTP request. If you need to retain information across requests you can use Catalyst::Plugin::Session (we will use Catalyst sessions in the Authentication part of the tutorial).

Create a TT Template Page

To add a new page of content to the TTSite view hierarchy, just create a new .tt2 file in root/src. Only include HTML markup that goes inside the HTML <body> and </body> tags, TTSite will use the contents of root/lib/site to add the top and bottom.

First create a directory for book-related TT templates:

    $ mkdir root/src/books

Then open root/src/books/list.tt2 in your editor and enter:

    [% # This is a TT comment.  The '-' at the end "chomps" the newline.  You won't -%]
    [% # see this "chomping" in your browser because HTML ignores blank lines, but  -%]
    [% # it WILL eliminate a blank line if you view the HTML source.  It's purely   -%]
    [%- # optional, but both the beginning and the ending TT tags support chomping. -%]
    
    [% # Provide a title to root/lib/site/header -%]
    [% META title = 'Book List' -%]
    
    <table>
    <tr><th>Title</th><th>Rating</th><th>Author(s)</th></tr>
    [% # Display each book in a table row %]
    [% FOREACH book IN books -%]
      <tr>
        <td>[% book.title %]</td>
        <td>[% book.rating %]</td>
        <td>
          [% # First initialize a TT variable to hold a list.  Then use a TT FOREACH -%]
          [% # loop in 'side effect notation' to load just the last names of the     -%]
          [% # authors into the list.  Note that we are making a bogus assignment to -%]
          [% # the 'xx' vbl to avoid printing the size of the list after each push.  -%]      
          [% tt_authors = [ ];
             xx = tt_authors.push(author.last_name) FOREACH author = book.authors %]
          [% # Now use a TT 'virtual method' to display the author count in parens   -%]
          ([% tt_authors.size %])
          [% # Use another vmethod to join & print the names with comma separators   -%]
          [% tt_authors.join(', ') %]
        </td>
      </tr>
    [% END -%]
    </table>

As indicated by the inline comments above, the META title line uses TT's META feature to provide a title to root/lib/site/header. Meanwhile, the outer FOREACH loop iterates through each book model object and prints the title and rating fields. An inner FOREACH loop prints the last name of each author in a comma-separated list within a single table cell.

If you are new to TT, the [% and %] tags are used to delimit TT code. TT supports a wide variety of directives for "calling" other files, looping, conditional logic, etc. In general, TT simplifies the usual range of Perl operators down to the single dot (.) operator. This applies to operations as diverse as method calls, hash lookups, and list index values (see http://www.template-toolkit.org/docs/default/Manual/Variables.html for details and examples). In addition to the usual Template module Pod documentation, you can access the TT manual at http://www.template-toolkit.org/docs/default/.

NOTE: The TTSite helper creates several TT files using an extension of .tt2. Most other Catalyst and TT examples use an extension of .tt. You can use either extension (or no extension at all) with TTSite and TT, just be sure to use the appropriate extension for both the file itself and the $c->stash->{template} = ... line in your controller. This document will use .tt2 for consistency with the files already created by the TTSite helper.

RUN THE APPLICATION

First, let's enable an environment variable option that causes DBIx::Class to dump the SQL statements it's using to access the database (this option can provide extremely helpful troubleshooting information):

    $ export DBIX_CLASS_STORAGE_DBI_DEBUG=1

NOTE: You can also set this in your code using $class->storage->debug(1);. See DBIx::Class::Manual::Troubleshooting for details (including options to log to file instead of displaying to the Catalyst development server log).

Then run the Catalyst "demo server" script:

    $ script/myapp_server.pl

You should get something like this:

    $ script/myapp_server.pl
    [Tue May 16 12:51:33 2006] [catalyst] [debug] Debug messages enabled
    [Tue May 16 12:51:33 2006] [catalyst] [debug] Loaded plugins:
    .------------------------------------------------------------------------------.
    | Catalyst::Plugin::ConfigLoader 0.09                                          |
    | Catalyst::Plugin::Static::Simple 0.14                                        |
    | Catalyst::Plugin::StackTrace 0.04                                            |
    | Catalyst::Plugin::DefaultEnd 0.06                                            |
    '------------------------------------------------------------------------------'
    
    [Tue May 16 12:51:33 2006] [catalyst] [debug] Loaded dispatcher "Catalyst::Dispatcher"
    [Tue May 16 12:51:33 2006] [catalyst] [debug] Loaded engine "Catalyst::Engine::HTTP"
    [Tue May 16 12:51:33 2006] [catalyst] [debug] Found home "/home/me/MyApp"
    [Tue May 16 12:51:37 2006] [catalyst] [debug] Loaded components:
    .-------------------------------------------------------------------+----------.
    | Class                                                             | Type     |
    +-------------------------------------------------------------------+----------+
    | MyApp::Controller::Books                                          | instance |
    | MyApp::Controller::Root                                           | instance |
    | MyApp::Model::MyAppDB                                             | instance |
    | MyApp::Model::MyAppDB::Author                                     | class    |
    | MyApp::Model::MyAppDB::Book                                       | class    |
    | MyApp::Model::MyAppDB::BookAuthor                                 | class    |
    | MyApp::View::TT                                                   | instance |
    '-------------------------------------------------------------------+----------'
    
    [Tue May 16 12:51:37 2006] [catalyst] [debug] Loaded Private actions:
    .----------------------+----------------------------------------+--------------.
    | Private              | Class                                  | Method       |
    +----------------------+----------------------------------------+--------------+
    | /default             | MyApp::Controller::Root                | default      |
    | /end                 | MyApp                                  | end          |
    | /books/list          | MyApp::Controller::Books               | list         |
    '----------------------+----------------------------------------+--------------'
    
    [Tue May 16 12:51:37 2006] [catalyst] [debug] Loaded Path actions:
    .--------------------------------------+---------------------------------------.
    | Path                                 | Private                               |
    +--------------------------------------+---------------------------------------+
    | /books/list                          | /books/list                           |
    '--------------------------------------+---------------------------------------'
    
    [Tue May 16 12:51:37 2006] [catalyst] [info] MyApp powered by Catalyst 5.6902
    You can connect to your server at http://localhost:3000

Some things you should note in the output above:

Catalyst::Model::DBIC::Schema took our MyAppDB::Book and made it MyApp::Model::MyAppDB::Book (and similar actions were performed on MyAppDB::Author and MyAppDB::BookAuthor).
The "list" action in our Books controller showed up with a path of /books/list.

Point your browser to http://localhost:3000 and you should still get the Catalyst welcome page.

Next, to view the book list, change the URL in your browser to http://localhost:3000/books/list. You should get a list of the five books loaded by the myapp01.sql script above, with TTSite providing the formatting for the very simple output we generated in our template. The count and space-separated list of author last names appear on the end of each row.

Also notice in the output of the script/myapp_server.pl that DBIC used the following SQL to retrieve the data:

    SELECT me.id, me.title, me.rating FROM books me

Along with a list of the following commands to retrieve the authors for each book (the lines have been "word wrapped" here to improve legibility):

    SELECT author.id, author.first_name, author.last_name 
        FROM book_authors me  
        JOIN authors author ON ( author.id = me.author_id ) 
        WHERE ( me.book_id = ? ): `1'

You should see 10 such lines of debug output, two for each of the five author_id values (it pulls the data once for the count logic and another time to actually display the list).

AUTHOR

Kennedy Clark, hkclark@gmail.com

Please report any errors, issues or suggestions to the author.

To install Catalyst::Runtime, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Catalyst::Runtime

CPAN shell

perl -MCPAN -e shell
install Catalyst::Runtime

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)