DBIx::Class::EasyFixture - Easy-to-use DBIx::Class fixtures.
Version 0.03
package My::Fixtures; use Moose; extends 'DBIx::Class::EasyFixture'; sub get_fixture { ... } sub all_fixture_names { ... }
And in your test code:
my $fixtures = My::Fixtures->new( { schema => $schema } ); my $dbic_object = $fixtures->load('some_fixture'); # run your tests $fixtures->unload;
Note that unload will be called for you if your fixture object falls out of scope.
unload
The latest version of this is always at https://github.com/Ovid/dbix-class-easyfixture.
This is ALPHA code. Documentation is on its way, including a tutorial. For now, you'll have to read the tests. You can read t/lib/My/Fixtures.pm to see how fixtures are defined.
ALPHA
I wanted an easier way to load fixtures for DBIx::Class code. I looked at DBIx::Class::Fixtures and it made a lot of assumptions that, while appropriate for some, is not what I wanted (such as the necessity of storing fixtures in JSON files), and had a reliance on knowing the values of primary keys, I wrote this to make it easier to define and load DBIx::Class fixtures for tests.
new
my $fixtures = Subclass::Of::DBIx::Class::EasyFixture->new({ schema => $dbix_class_schema_instance, });
This creates and returns a new instance of your DBIx::Class::EasyFixture subclass. All fixture definitions are validated at this time and the constructor will croak() with a useful error message upon validation failure.
DBIx::Class::EasyFixture
croak()
all_fixture_names
my @fixture_names = $fixtures->all_fixture_names;
Must overridden in your subclass. Should return a list (not an array ref!) of all fixture names available. This is used internally to generate error messages if a fixture attempts to reference a non-existent fixture in its next or requires section.
next
requires
get_definition
my $definition = $fixtures->get_definition($fixture_name);
Must be overridden in a subclass. Should return the fixture definition for the fixture name passed in. Should return undef if the fixture is not found.
undef
get_result
my $dbic_result_object = $fixtures->get_result($fixture_name);
Returns the DBIx::Class::Result object for the given fixture name. Will carp if the fixture wasn't loaded (this may become a fatal error in future versions).
DBIx::Class::Result
carp
load
my @dbic_objects = $fixtures->load(@list_of_fixture_names);
Attempts to load all fixtures passed to it. If a transaction has not already been started, it will be started now. This method may be called multiple times and it returns the fixtures loaded. If called in scalar context, only returns the first fixture loaded.
$fixtures->unload;
Rolls back the transaction started with load
fixture_loaded
if ( $fixtures->fixture_loaded($fixture_name) ) { ... }
Returns a boolean value indicating whether or not the given fixture was loaded.
If the following is unclear, see DBIx::Class::EasyFixture::Tutorial.
The get_definition($fixture_name) method must always return a fixture definition. The definition must be either a fixture group or a fixture builder.
get_definition($fixture_name)
A fixture group is an array reference containing a list of fixture names. For example, $fixture->get_definition('all_people') might return:
$fixture->get_definition('all_people')
[qw/ person_1 person_2 person_2 /]
A fixture builder must return a hash reference with the one or more of the following keys:
new (required)
A DBIx::Class result source name.
DBIx::Class
{ new => 'Person', using => { name => 'Bob', email => 'bob@example.com', } }
Internally, the above will do something similar to this:
$schema->resultset($definition->{name}) ->create($definition->{using});
using (required)
using
A hashref of key/value pairs that will be used to create the DBIx::Class result source referred to by the new key.
next (optional)
If present, this must point to an array reference of fixture names (in other words, a fixture group). These fixtures will then be built after the current fixture is built.
{ new => 'Person', using => { name => 'Bob', email => 'bob@example.com', }, next => [@list_of_fixture_names], }
requires (optional)
Must point to either a scalar of an attribute name or a hash mapping of attribute names.
Many fixtures require data from another fixture. For example, a customer might require a person object being built and the following won't work:
{ new => 'Customer', using => { first_purchase => $datetime_object, person_id => 'some_person.person_id', } }
Assuming we already have a Person fixture defined and it's named some_person and its ID is named id, we can do this:
Person
some_person
id
{ new => 'Customer', using => { first_purchase => $datetime_object }, requires => { some_person => { our => 'person_id', their => 'id', }, }, }
If you prefer, you can inline the requires into the using key. You may find this syntax cleaner:
{ new => 'Customer', using => { first_purchase => $datetime_object, person_id => { some_person => 'id' }, }, }
The our key refers to the attribute for the Customer fixture and the their key refers to the attribute of the Person fixture. As a convenience, if both attributes have the same name, you can omit that hashref and just use the attribute name:
our
Customer
their
{ new => 'Customer', using => { first_purchase => $datetime_object }, requires => { some_person => 'person_id', }, }
And multiple requires can be specified:
{ new => 'Customer', using => { first_purchase => $datetime_object }, requires => { some_person => 'person_id', primary_contact => 'contact_id', }, }
Or you can skip the requires block entirely and write the above like this (which is now the preferred syntax, but whatever floats your boat):
{ new => 'Customer', using => { first_purchase => $datetime_object, person_id => { some_person => 'person_id' }, contact_id => { primary_contact => 'contact_id' }, }, }
If both the current fixture and the other fixture it requires have the same name for the attribute, a reference to the other fixture name (scalar reference) will suffice:
{ new => 'Customer', using => { first_purchase => $datetime_object, person_id => \'some_person', contact_id => \'primary_contact', }, } The above will construct the fixture like this: $schema->resultset('Customer')->create({ first_purchase => $datetime_object, person_id => $person->person_id, primary_contact => $contact->contact_id, });
When writing a fixture builder, remember that requires are always built before the current fixture and next is also built after the current fixture.
See DBIx::Class::EasyFixture::Tutorial.
Curtis "Ovid" Poe, <ovid at cpan.org>
<ovid at cpan.org>
Prevent circular fixtures
Currently it's very easy to define circular dependencies. We'll worry about that later when it becomes more clear how to best handle them.
Better load information
Track what fixtures are requested and what fixtures are loaded (and in which order). This makes for better error reporting.
Please report any bugs or feature requests to bug-dbix-class-simplefixture at rt.cpan.org, or through the web interface at https://github.com/Ovid/dbix-class-easyfixture/issues. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.
bug-dbix-class-simplefixture at rt.cpan.org
You can find documentation for this module with the perldoc command.
perldoc DBIx::Class::EasyFixture perldoc DBIx::Class::EasyFixture::Tutorial
You can also look for information at:
RT: CPAN's request tracker (report bugs here)
https://github.com/Ovid/dbix-class-easyfixture/issues
AnnoCPAN: Annotated CPAN documentation
http://annocpan.org/dist/DBIx-Class-EasyFixture
CPAN Ratings
http://cpanratings.perl.org/d/DBIx-Class-EasyFixture
Search CPAN
http://search.cpan.org/dist/DBIx-Class-EasyFixture/
Many thanks to http://www.allaroundtheworld.fr/ for sponsoring this work.
See also http://search.cpan.org/dist/DBIx-Class-Fixtures/.
Copyright 2014 Curtis "Ovid" Poe.
This program is free software; you can redistribute it and/or modify it under the terms of the the Artistic License (2.0). You may obtain a copy of the full license at:
http://www.perlfoundation.org/artistic_license_2_0
Any use, modification, and distribution of the Standard or Modified Versions is governed by this Artistic License. By using, modifying or distributing the Package, you accept this license. Do not use, modify, or distribute the Package, if you do not accept this license.
If your Modified Version has been derived from a Modified Version made by someone other than you, you are nevertheless required to ensure that your Modified Version complies with the requirements of this license.
This license does not grant you the right to use any trademark, service mark, tradename, or logo of the Copyright Holder.
This license includes the non-exclusive, worldwide, free-of-charge patent license to make, have made, use, offer to sell, sell, import and otherwise transfer the Package with respect to any patent claims licensable by the Copyright Holder that are necessarily infringed by the Package. If you institute patent litigation (including a cross-claim or counterclaim) against any party alleging that the Package constitutes direct or contributory patent infringement, then this Artistic License to you shall terminate on the date that such litigation is filed.
Disclaimer of Warranty: THE PACKAGE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS IS' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT PERMITTED BY YOUR LOCAL LAW. UNLESS REQUIRED BY LAW, NO COPYRIGHT HOLDER OR CONTRIBUTOR WILL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
To install DBIx::Class::EasyFixture, copy and paste the appropriate command in to your terminal.
cpanm
cpanm DBIx::Class::EasyFixture
CPAN shell
perl -MCPAN -e shell install DBIx::Class::EasyFixture
For more information on module installation, please visit the detailed CPAN module installation guide.