- NAME
- SYNOPSIS
- DESCRIPTION
- OPERATIONS
- CREATION
- STRINGIFICATION
- USAGE
- ERRORS DUE TO DIVISION BY ZERO
- BUGS
- AUTHORS

# NAME

Math::Complex - complex numbers and associated mathematical functions

# SYNOPSIS

```
use Math::Complex;
$z = Math::Complex->make(5, 6);
$t = 4 - 3*i + $z;
$j = cplxe(1, 2*pi/3);
```

# DESCRIPTION

This package lets you create and manipulate complex numbers. By default, *Perl* limits itself to real numbers, but an extra `use`

statement brings full complex support, along with a full set of mathematical functions typically associated with and/or extended to complex numbers.

If you wonder what complex numbers are, they were invented to be able to solve the following equation:

` x*x = -1`

and by definition, the solution is noted *i* (engineers use *j* instead since *i* usually denotes an intensity, but the name does not matter). The number *i* is a pure *imaginary* number.

The arithmetics with pure imaginary numbers works just like you would expect it with real numbers... you just have to remember that

` i*i = -1`

so you have:

```
5i + 7i = i * (5 + 7) = 12i
4i - 3i = i * (4 - 3) = i
4i * 2i = -8
6i / 2i = 3
1 / i = -i
```

Complex numbers are numbers that have both a real part and an imaginary part, and are usually noted:

` a + bi`

where `a`

is the *real* part and `b`

is the *imaginary* part. The arithmetic with complex numbers is straightforward. You have to keep track of the real and the imaginary parts, but otherwise the rules used for real numbers just apply:

```
(4 + 3i) + (5 - 2i) = (4 + 5) + i(3 - 2) = 9 + i
(2 + i) * (4 - i) = 2*4 + 4i -2i -i*i = 8 + 2i + 1 = 9 + 2i
```

A graphical representation of complex numbers is possible in a plane (also called the *complex plane*, but it's really a 2D plane). The number

` z = a + bi`

is the point whose coordinates are (a, b). Actually, it would be the vector originating from (0, 0) to (a, b). It follows that the addition of two complex numbers is a vectorial addition.

Since there is a bijection between a point in the 2D plane and a complex number (i.e. the mapping is unique and reciprocal), a complex number can also be uniquely identified with polar coordinates:

` [rho, theta]`

where `rho`

is the distance to the origin, and `theta`

the angle between the vector and the *x* axis. There is a notation for this using the exponential form, which is:

` rho * exp(i * theta)`

where *i* is the famous imaginary number introduced above. Conversion between this form and the cartesian form `a + bi`

is immediate:

```
a = rho * cos(theta)
b = rho * sin(theta)
```

which is also expressed by this formula:

` z = rho * exp(i * theta) = rho * (cos theta + i * sin theta)`

In other words, it's the projection of the vector onto the *x* and *y* axes. Mathematicians call *rho* the *norm* or *modulus* and *theta* the *argument* of the complex number. The *norm* of `z`

will be noted `abs(z)`

.

The polar notation (also known as the trigonometric representation) is much more handy for performing multiplications and divisions of complex numbers, whilst the cartesian notation is better suited for additions and substractions. Real numbers are on the *x* axis, and therefore *theta* is zero.

All the common operations that can be performed on a real number have been defined to work on complex numbers as well, and are merely *extensions* of the operations defined on real numbers. This means they keep their natural meaning when there is no imaginary part, provided the number is within their definition set.

For instance, the `sqrt`

routine which computes the square root of its argument is only defined for positive real numbers and yields a positive real number (it is an application from **R+** to **R+**). If we allow it to return a complex number, then it can be extended to negative real numbers to become an application from **R** to **C** (the set of complex numbers):

` sqrt(x) = x >= 0 ? sqrt(x) : sqrt(-x)*i`

It can also be extended to be an application from **C** to **C**, whilst its restriction to **R** behaves as defined above by using the following definition:

` sqrt(z = [r,t]) = sqrt(r) * exp(i * t/2)`

Indeed, a negative real number can be noted `[x,pi]`

(the modulus *x* is always positive, so `[x,pi]`

is really `-x`

, a negative number) and the above definition states that

` sqrt([x,pi]) = sqrt(x) * exp(i*pi/2) = [sqrt(x),pi/2] = sqrt(x)*i`

which is exactly what we had defined for negative real numbers above.

All the common mathematical functions defined on real numbers that are extended to complex numbers share that same property of working *as usual* when the imaginary part is zero (otherwise, it would not be called an extension, would it?).

A *new* operation possible on a complex number that is the identity for real numbers is called the *conjugate*, and is noted with an horizontal bar above the number, or `~z`

here.

```
z = a + bi
~z = a - bi
```

Simple... Now look:

` z * ~z = (a + bi) * (a - bi) = a*a + b*b`

We saw that the norm of `z`

was noted `abs(z)`

and was defined as the distance to the origin, also known as:

` rho = abs(z) = sqrt(a*a + b*b)`

so

` z * ~z = abs(z) ** 2`

If z is a pure real number (i.e. `b == 0`

), then the above yields:

` a * a = abs(a) ** 2`

which is true (`abs`

has the regular meaning for real number, i.e. stands for the absolute value). This example explains why the norm of `z`

is noted `abs(z)`

: it extends the `abs`

function to complex numbers, yet is the regular `abs`

we know when the complex number actually has no imaginary part... This justifies *a posteriori* our use of the `abs`

notation for the norm.

# OPERATIONS

Given the following notations:

```
z1 = a + bi = r1 * exp(i * t1)
z2 = c + di = r2 * exp(i * t2)
z = <any complex or real number>
```

the following (overloaded) operations are supported on complex numbers:

```
z1 + z2 = (a + c) + i(b + d)
z1 - z2 = (a - c) + i(b - d)
z1 * z2 = (r1 * r2) * exp(i * (t1 + t2))
z1 / z2 = (r1 / r2) * exp(i * (t1 - t2))
z1 ** z2 = exp(z2 * log z1)
~z1 = a - bi
abs(z1) = r1 = sqrt(a*a + b*b)
sqrt(z1) = sqrt(r1) * exp(i * t1/2)
exp(z1) = exp(a) * exp(i * b)
log(z1) = log(r1) + i*t1
sin(z1) = 1/2i (exp(i * z1) - exp(-i * z1))
cos(z1) = 1/2 (exp(i * z1) + exp(-i * z1))
abs(z1) = r1
atan2(z1, z2) = atan(z1/z2)
```

The following extra operations are supported on both real and complex numbers:

```
Re(z) = a
Im(z) = b
arg(z) = t
cbrt(z) = z ** (1/3)
log10(z) = log(z) / log(10)
logn(z, n) = log(z) / log(n)
tan(z) = sin(z) / cos(z)
csc(z) = 1 / sin(z)
sec(z) = 1 / cos(z)
cot(z) = 1 / tan(z)
asin(z) = -i * log(i*z + sqrt(1-z*z))
acos(z) = -i * log(z + i*sqrt(1-z*z))
atan(z) = i/2 * log((i+z) / (i-z))
acsc(z) = asin(1 / z)
asec(z) = acos(1 / z)
acot(z) = atan(1 / z) = -i/2 * log((i+z) / (z-i))
sinh(z) = 1/2 (exp(z) - exp(-z))
cosh(z) = 1/2 (exp(z) + exp(-z))
tanh(z) = sinh(z) / cosh(z) = (exp(z) - exp(-z)) / (exp(z) + exp(-z))
csch(z) = 1 / sinh(z)
sech(z) = 1 / cosh(z)
coth(z) = 1 / tanh(z)
asinh(z) = log(z + sqrt(z*z+1))
acosh(z) = log(z + sqrt(z*z-1))
atanh(z) = 1/2 * log((1+z) / (1-z))
acsch(z) = asinh(1 / z)
asech(z) = acosh(1 / z)
acoth(z) = atanh(1 / z) = 1/2 * log((1+z) / (z-1))
```

*log*, *csc*, *cot*, *acsc*, *acot*, *csch*, *coth*, *acosech*, *acotanh*, have aliases *ln*, *cosec*, *cotan*, *acosec*, *acotan*, *cosech*, *cotanh*, *acosech*, *acotanh*, respectively.

The *root* function is available to compute all the *n* roots of some complex, where *n* is a strictly positive integer. There are exactly *n* such roots, returned as a list. Getting the number mathematicians call `j`

such that:

` 1 + j + j*j = 0;`

is a simple matter of writing:

` $j = ((root(1, 3))[1];`

The *k*th root for `z = [r,t]`

is given by:

` (root(z, n))[k] = r**(1/n) * exp(i * (t + 2*k*pi)/n)`

The *spaceship* comparison operator, <=>, is also defined. In order to ensure its restriction to real numbers is conform to what you would expect, the comparison is run on the real part of the complex number first, and imaginary parts are compared only when the real parts match.

# CREATION

To create a complex number, use either:

```
$z = Math::Complex->make(3, 4);
$z = cplx(3, 4);
```

if you know the cartesian form of the number, or

` $z = 3 + 4*i;`

if you like. To create a number using the polar form, use either:

```
$z = Math::Complex->emake(5, pi/3);
$x = cplxe(5, pi/3);
```

instead. The first argument is the modulus, the second is the angle (in radians, the full circle is 2*pi). (Mnmemonic: `e`

is used as a notation for complex numbers in the polar form).

It is possible to write:

` $x = cplxe(-3, pi/4);`

but that will be silently converted into `[3,-3pi/4]`

, since the modulus must be positive (it represents the distance to the origin in the complex plane).

# STRINGIFICATION

When printed, a complex number is usually shown under its cartesian form *a+bi*, but there are legitimate cases where the polar format *[r,t]* is more appropriate.

By calling the routine `Math::Complex::display_format`

and supplying either `"polar"`

or `"cartesian"`

, you override the default display format, which is `"cartesian"`

. Not supplying any argument returns the current setting.

This default can be overridden on a per-number basis by calling the `display_format`

method instead. As before, not supplying any argument returns the current display format for this number. Otherwise whatever you specify will be the new display format for *this* particular number.

For instance:

```
use Math::Complex;
Math::Complex::display_format('polar');
$j = ((root(1, 3))[1];
print "j = $j\n"; # Prints "j = [1,2pi/3]
$j->display_format('cartesian');
print "j = $j\n"; # Prints "j = -0.5+0.866025403784439i"
```

The polar format attempts to emphasize arguments like *k*pi/n* (where *n* is a positive integer and *k* an integer within [-9,+9]).

# USAGE

Thanks to overloading, the handling of arithmetics with complex numbers is simple and almost transparent.

Here are some examples:

```
use Math::Complex;
$j = cplxe(1, 2*pi/3); # $j ** 3 == 1
print "j = $j, j**3 = ", $j ** 3, "\n";
print "1 + j + j**2 = ", 1 + $j + $j**2, "\n";
$z = -16 + 0*i; # Force it to be a complex
print "sqrt($z) = ", sqrt($z), "\n";
$k = exp(i * 2*pi/3);
print "$j - $k = ", $j - $k, "\n";
```

# ERRORS DUE TO DIVISION BY ZERO

The division (/) and the following functions

```
tan
sec
csc
cot
asec
acsc
atan
acot
tanh
sech
csch
coth
atanh
asech
acsch
acoth
```

cannot be computed for all arguments because that would mean dividing by zero or taking logarithm of zero. These situations cause fatal runtime errors looking like this

```
cot(0): Division by zero.
(Because in the definition of cot(0), the divisor sin(0) is 0)
Died at ...
```

or

```
atanh(-1): Logarithm of zero.
Died at...
```

For the `csc`

, `cot`

, `asec`

, `acsc`

, `acot`

, `csch`

, `coth`

, `asech`

, `acsch`

, the argument cannot be `0`

(zero). For the `atanh`

, `acoth`

, the argument cannot be `1`

(one). For the `atanh`

, `acoth`

, the argument cannot be `-1`

(minus one). For the `atan`

, `acot`

, the argument cannot be `i`

(the imaginary unit). For the `atan`

, `acoth`

, the argument cannot be `-i`

(the negative imaginary unit). For the `tan`

, `sec`

, `tanh`

, `sech`

, the argument cannot be *pi/2 + k * pi*, where *k* is any integer.

# BUGS

Saying `use Math::Complex;`

exports many mathematical routines in the caller environment and even overrides some (`sqrt`

, `log`

). This is construed as a feature by the Authors, actually... ;-)

All routines expect to be given real or complex numbers. Don't attempt to use BigFloat, since Perl has currently no rule to disambiguate a '+' operation (for instance) between two overloaded entities.

# AUTHORS

Raphael Manfredi <*Raphael_Manfredi@grenoble.hp.com*> and Jarkko Hietaniemi <*jhi@iki.fi*>.

Patches by Daniel S. Lewart <*d-lewart@uiuc.edu*>.