The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.

NAME

perlsec - Perl security

DESCRIPTION

Perl is designed to make it easy to program securely even when running with extra privileges, like setuid or setgid programs. Unlike most command-line shells, which are based on multiple substitution passes on each line of the script, Perl uses a more conventional evaluation scheme with fewer hidden snags. Additionally, because the language has more built-in functionality, it can rely less upon external (and possibly untrustworthy) programs to accomplish its purposes.

Perl automatically enables a set of special security checks, called taint mode, when it detects its program running with differing real and effective user or group IDs. The setuid bit in Unix permissions is mode 04000, the setgid bit mode 02000; either or both may be set. You can also enable taint mode explicitly by using the -T command line flag. This flag is strongly suggested for server programs and any program run on behalf of someone else, such as a CGI script.

While in this mode, Perl takes special precautions called taint checks to prevent both obvious and subtle traps. Some of these checks are reasonably simple, such as verifying that path directories aren't writable by others; careful programmers have always used checks like these. Other checks, however, are best supported by the language itself, and it is these checks especially that contribute to making a setuid Perl program more secure than the corresponding C program.

You may not use data derived from outside your program to affect something else outside your program--at least, not by accident. All command-line arguments, environment variables, locale information (see perllocale), and file input are marked as "tainted". Tainted data may not be used directly or indirectly in any command that invokes a sub-shell, nor in any command that modifies files, directories, or processes. Any variable set within an expression that has previously referenced a tainted value itself becomes tainted, even if it is logically impossible for the tainted value to influence the variable. Because taintedness is associated with each scalar value, some elements of an array can be tainted and others not.

For example:

    $arg = shift;               # $arg is tainted
    $hid = $arg, 'bar';         # $hid is also tainted
    $line = <>;                 # Tainted
    $line = <STDIN>;            # Also tainted
    open FOO, "/home/me/bar" or die $!;
    $line = <FOO>;              # Still tainted
    $path = $ENV{'PATH'};       # Tainted, but see below
    $data = 'abc';              # Not tainted

    system "echo $arg";         # Insecure
    system "/bin/echo", $arg;   # Secure (doesn't use sh)
    system "echo $hid";         # Insecure
    system "echo $data";        # Insecure until PATH set

    $path = $ENV{'PATH'};       # $path now tainted

    $ENV{'PATH'} = '/bin:/usr/bin'; 
    $ENV{'IFS'} = '' if $ENV{'IFS'} ne '';

    $path = $ENV{'PATH'};       # $path now NOT tainted
    system "echo $data";        # Is secure now!

    open(FOO, "< $arg");        # OK - read-only file
    open(FOO, "> $arg");        # Not OK - trying to write

    open(FOO,"echo $arg|");     # Not OK, but...
    open(FOO,"-|")
        or exec 'echo', $arg;   # OK

    $shout = `echo $arg`;       # Insecure, $shout now tainted

    unlink $data, $arg;         # Insecure
    umask $arg;                 # Insecure

    exec "echo $arg";           # Insecure
    exec "echo", $arg;          # Secure (doesn't use the shell)
    exec "sh", '-c', $arg;      # Considered secure, alas!

If you try to do something insecure, you will get a fatal error saying something like "Insecure dependency" or "Insecure PATH". Note that you can still write an insecure system or exec, but only by explicitly doing something like the last example above.

Laundering and Detecting Tainted Data

To test whether a variable contains tainted data, and whose use would thus trigger an "Insecure dependency" message, you can use the following is_tainted() function.

    sub is_tainted {
        return ! eval { 
            join('',@_), kill 0; 
            1;  
        };
    }

This function makes use of the fact that the presence of tainted data anywhere within an expression renders the entire expression tainted. It would be inefficient for every operator to test every argument for taintedness. Instead, the slightly more efficient and conservative approach is used that if any tainted value has been accessed within the same expression, the whole expression is considered tainted.

But testing for taintedness gets you only so far. Sometimes you have just to clear your data's taintedness. The only way to bypass the tainting mechanism is by referencing sub-patterns from a regular expression match. Perl presumes that if you reference a substring using $1, $2, etc., that you knew what you were doing when you wrote the pattern. That means using a bit of thought--don't just blindly untaint anything, or you defeat the entire mechanism. It's better to verify that the variable has only good characters (for certain values of "good") rather than checking whether it has any bad characters. That's because it's far too easy to miss bad characters that you never thought of.

Here's a test to make sure that the data contains nothing but "word" characters (alphabetics, numerics, and underscores), a hyphen, an at sign, or a dot.

    if ($data =~ /^([-\@\w.]+)$/) {     
        $data = $1;                     # $data now untainted
    } else {
        die "Bad data in $data";        # log this somewhere
    }

This is fairly secure because /\w+/ doesn't normally match shell metacharacters, nor are dot, dash, or at going to mean something special to the shell. Use of /.+/ would have been insecure in theory because it lets everything through, but Perl doesn't check for that. The lesson is that when untainting, you must be exceedingly careful with your patterns. Laundering data using regular expression is the ONLY mechanism for untainting dirty data, unless you use the strategy detailed below to fork a child of lesser privilege.

The example does not untaint $data if use locale is in effect, because the characters matched by \w are determined by the locale. Perl considers that locale definitions are untrustworthy because they contain data from outside the program. If you are writing a locale-aware program, and want to launder data with a regular expression containing \w, put no locale ahead of the expression in the same block. See "SECURITY" in perllocale for further discussion and examples.

Switches On the "#!" Line

When you make a script executable, in order to make it usable as a command, the system will pass switches to perl from the script's #! line. Perl checks that any command-line switches given to a setuid (or setgid) script actually match the ones set on the #! line. Some UNIX and UNIX-like environments impose a one-switch limit on the #! line, so you may need to use something like -wU instead of -w -U under such systems. (This issue should arise only in UNIX or UNIX-like environments that support #! and setuid or setgid scripts.)

Cleaning Up Your Path

For "Insecure $ENV{PATH}" messages, you need to set $ENV{'PATH'} to a known value, and each directory in the path must be non-writable by others than its owner and group. You may be surprised to get this message even if the pathname to your executable is fully qualified. This is not generated because you didn't supply a full path to the program; instead, it's generated because you never set your PATH environment variable, or you didn't set it to something that was safe. Because Perl can't guarantee that the executable in question isn't itself going to turn around and execute some other program that is dependent on your PATH, it makes sure you set the PATH.

It's also possible to get into trouble with other operations that don't care whether they use tainted values. Make judicious use of the file tests in dealing with any user-supplied filenames. When possible, do opens and such after setting $> = $<. (Remember group IDs, too!) Perl doesn't prevent you from opening tainted filenames for reading, so be careful what you print out. The tainting mechanism is intended to prevent stupid mistakes, not to remove the need for thought.

Perl does not call the shell to expand wild cards when you pass system and exec explicit parameter lists instead of strings with possible shell wildcards in them. Unfortunately, the open, glob, and back-tick functions provide no such alternate calling convention, so more subterfuge will be required.

Perl provides a reasonably safe way to open a file or pipe from a setuid or setgid program: just create a child process with reduced privilege who does the dirty work for you. First, fork a child using the special open syntax that connects the parent and child by a pipe. Now the child resets its ID set and any other per-process attributes, like environment variables, umasks, current working directories, back to the originals or known safe values. Then the child process, which no longer has any special permissions, does the open or other system call. Finally, the child passes the data it managed to access back to the parent. Because the file or pipe was opened in the child while running under less privilege than the parent, it's not apt to be tricked into doing something it shouldn't.

Here's a way to do back-ticks reasonably safely. Notice how the exec is not called with a string that the shell could expand. This is by far the best way to call something that might be subjected to shell escapes: just never call the shell at all. By the time we get to the exec, tainting is turned off, however, so be careful what you call and what you pass it.

    use English;  
    die unless defined $pid = open(KID, "-|");
    if ($pid) {           # parent
        while (<KID>) {
            # do something
        }
        close KID;
    } else {
        $EUID = $UID;
        $EGID = $GID;    # XXX: initgroups() not called
        $ENV{PATH} = "/bin:/usr/bin";
        exec 'myprog', 'arg1', 'arg2';
        die "can't exec myprog: $!";
    }

A similar strategy would work for wildcard expansion via glob.

Taint checking is most useful when although you trust yourself not to have written a program to give away the farm, you don't necessarily trust those who end up using it not to try to trick it into doing something bad. This is the kind of security checking that's useful for setuid programs and programs launched on someone else's behalf, like CGI programs.

This is quite different, however, from not even trusting the writer of the code not to try to do something evil. That's the kind of trust needed when someone hands you a program you've never seen before and says, "Here, run this." For that kind of safety, check out the Safe module, included standard in the Perl distribution. This module allows the programmer to set up special compartments in which all system operations are trapped and namespace access is carefully controlled.

Security Bugs

Beyond the obvious problems that stem from giving special privileges to systems as flexible as scripts, on many versions of Unix, setuid scripts are inherently insecure right from the start. The problem is a race condition in the kernel. Between the time the kernel opens the file to see which interpreter to run and when the (now-setuid) interpreter turns around and reopens the file to interpret it, the file in question may have changed, especially if you have symbolic links on your system.

Fortunately, sometimes this kernel "feature" can be disabled. Unfortunately, there are two ways to disable it. The system can simply outlaw scripts with the setuid bit set, which doesn't help much. Alternately, it can simply ignore the setuid bit on scripts. If the latter is true, Perl can emulate the setuid and setgid mechanism when it notices the otherwise useless setuid/gid bits on Perl scripts. It does this via a special executable called suidperl that is automatically invoked for you if it's needed.

However, if the kernel setuid script feature isn't disabled, Perl will complain loudly that your setuid script is insecure. You'll need to either disable the kernel setuid script feature, or put a C wrapper around the script. A C wrapper is just a compiled program that does nothing except call your Perl program. Compiled programs are not subject to the kernel bug that plagues setuid scripts. Here's a simple wrapper, written in C:

    #define REAL_PATH "/path/to/script"
    main(ac, av) 
        char **av;
    {
        execv(REAL_PATH, av);
    } 

Compile this wrapper into a binary executable and then make it rather than your script setuid or setgid.

See the program wrapsuid in the eg directory of your Perl distribution for a convenient way to do this automatically for all your setuid Perl programs. It moves setuid scripts into files with the same name plus a leading dot, and then compiles a wrapper like the one above for each of them.

In recent years, vendors have begun to supply systems free of this inherent security bug. On such systems, when the kernel passes the name of the setuid script to open to the interpreter, rather than using a pathname subject to meddling, it instead passes /dev/fd/3. This is a special file already opened on the script, so that there can be no race condition for evil scripts to exploit. On these systems, Perl should be compiled with -DSETUID_SCRIPTS_ARE_SECURE_NOW. The Configure program that builds Perl tries to figure this out for itself, so you should never have to specify this yourself. Most modern releases of SysVr4 and BSD 4.4 use this approach to avoid the kernel race condition.

Prior to release 5.003 of Perl, a bug in the code of suidperl could introduce a security hole in systems compiled with strict POSIX compliance.