#---------------------------------------------------------------------
package AppleII::Disk;
#
# Copyright 1996-2006 Christopher J. Madsen
#
# Author: Christopher J. Madsen <perl@cjmweb.net>
# Created: 25 Jul 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the same terms as Perl itself.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See either the
# GNU General Public License or the Artistic License for more details.
#
# ABSTRACT: Block-level access to Apple II disk image files
#---------------------------------------------------------------------
use 5.006;
use Carp;
use IO::File;
use strict;
use warnings;
use bytes;
#=====================================================================
# Package Global Variables:
our $VERSION = '0.201';
# This file is part of AppleII-LibA2 0.201 (September 12, 2015)
#=====================================================================
# Class AppleII::Disk:
#
# Member Variables:
# filename: The pathname of the disk image file
# writable: True if the image is opened in read/write mode
# file: The IO::File attached to the image file
# actlen: The size of the image file in bytes
# maxlen: The maximum allowable size of the image file in bytes
#---------------------------------------------------------------------
# Constructor:
#
# Input:
# filename:
# The pathname of the image file you want to open
# mode:
# A string indicating how the image should be opened
# May contain any of the following characters (case sensitive):
# r Allow reads (this is actually ignored; you can always read)
# w Allow writes
# d Disk image is in DOS 3.3 order (default)
# p Disk image is in ProDOS order
sub new
{
my ($type, $filename, $mode) = @_;
my $self = {};
$self->{filename} = $filename;
my $file = IO::File->new;
$mode = 'r' unless $mode;
my $openMode = '<';
if ($mode =~ /w/) {
$self->{writable} = 1;
$openMode = '+<';
$openMode = '+>' if not -e $filename; # Create empty file
} # end if writable
$file->open($filename, $openMode) or croak("Couldn't open `$filename': $!");
binmode $file; # binmode didn't become a method until IO::File 1.11
$self->{file} = $file;
$self->{actlen} = ($file->stat)[7]; # Get real size of file
$self->{maxlen} = $self->{actlen};
$type = 'AppleII::Disk::ProDOS' if $mode =~ /p/;
$type = 'AppleII::Disk::DOS33' if $mode =~ /d/;
$type = (($filename =~ /\.(?:hdv|po)$/i)
? 'AppleII::Disk::ProDOS'
: 'AppleII::Disk::DOS33')
if ($type eq 'AppleII::Disk');
bless $self, $type;
} # end AppleII::Disk::new
#---------------------------------------------------------------------
# Pad a block of data:
#
# This is a normal subroutine, NOT a method!
#
# Input:
# data: The block to be padded
# pad: The character to pad with (default "\0") or '' for no padding
# length: The length to pad to (default 0x200)
#
# Returns:
# The BLOCK padded to LENGTH with PAD
# Dies if the block is too long.
# If PAD is the null string, dies if BLOCK is not already LENGTH.
sub pad_block
{
my ($data, $pad, $length) = @_;
$pad = "\0" unless defined $pad;
$length = $length || 0x200;
$data .= $pad x ($length - length($data))
if (length($pad) and length($data) < $length);
unless (length($data) == $length) {
local $Carp::CarpLevel = $Carp::CarpLevel;
++$Carp::CarpLevel if (caller)[0] =~ /^AppleII::Disk::/;
croak(sprintf("Data block is %d bytes",length($data)));
}
$data;
} # end AppleII::Disk::pad_block
#---------------------------------------------------------------------
# Get or set the disk size:
#
# Input:
# size: The number of blocks in the disk image
# If SIZE is omitted, the disk size is not changed
#
# Returns:
# The number of blocks in the disk image
sub blocks
{
my $self = shift;
if (@_) {
$self->{maxlen} = $_[0] * 0x200;
carp "Disk image contains more than $_[0] blocks"
if $self->{maxlen} < $self->{actlen};
}
int($self->{maxlen} / 0x200);
} # end AppleII::Disk::blocks
#---------------------------------------------------------------------
# Extend the image file to its full size:
sub fully_allocate
{
my $self = shift;
if ($self->{maxlen} > $self->{actlen}) {
croak("Disk image is read/only") unless $self->{writable};
$self->{file}->truncate($self->{maxlen}) or croak "Can't extend file: $!";
$self->{actlen} = $self->{maxlen};
} # end if file is not already at maximum size
} # end AppleII::Disk::fully_allocate
#---------------------------------------------------------------------
# Read a ProDOS block:
#
# Input:
# block: The block number to read
#
# Returns:
# A 512 byte block
#
# Implemented in AppleII::Disk::ProDOS & AppleII::Disk::DOS33
#
# sub read_block
#---------------------------------------------------------------------
# Read a series of ProDOS blocks:
#
# As a special case, block 0 cannot be read by this method. Instead,
# it returns a block full of 0 bytes. This is how sparse files are
# implemented. If you want to read the actual contents of block 0,
# you must call $disk->read_block(0) directly.
#
# Input:
# blocks: An array of block numbers to read
#
# Returns:
# The data from the disk (512 bytes times the number of blocks)
sub read_blocks
{
my ($self, $blocks) = @_;
my $data = '';
foreach (@$blocks) {
if ($_) { $data .= $self->read_block($_) }
else { $data .= "\0" x 0x200 } # Sparse block
}
$data;
} # end AppleII::Disk::read_blocks
#---------------------------------------------------------------------
# Read a DOS 3.3 sector:
#
# Input:
# track: The track number to read
# sector: The sector number to read
#
# Returns:
# A 256 byte sector
#
# Implemented in AppleII::Disk::ProDOS & AppleII::Disk::DOS33
#
# sub read_sector
#---------------------------------------------------------------------
# Write a ProDOS block:
#
# Input:
# block: The block number to read
# data: The contents of the block
# pad: A character to pad the block with (optional)
# If PAD is omitted, an error is generated if data is not 512 bytes
#
# Implemented in AppleII::Disk::ProDOS & AppleII::Disk::DOS33
#
# sub write_block
#---------------------------------------------------------------------
# Write a series of ProDOS blocks:
#
# As a special case, block 0 cannot be written by this method.
# Instead, that block is just skipped. This is how sparse files are
# implemented. If you want to write the contents of block 0, you must
# call $disk->write_block directly.
#
# Input:
# blocks: An array of the block numbers to write to
# data: The data to write (must be exactly the right size)
# pad: A character to pad the last block with (optional)
sub write_blocks
{
my ($self, $blocks, $data, $pad) = @_;
my $index = 0;
foreach (@$blocks) {
$self->write_block($_, substr($data, $index, 0x200), $pad) if $_;
$index += 0x200;
}
} # end AppleII::Disk::write_blocks
#---------------------------------------------------------------------
# Write a DOS 3.3 sector:
#
# Input:
# track: The track number to read
# sector: The sector number to read
# data: The contents of the sector
# pad: The value to pad the sector with (optional)
# If PAD is omitted, an error is generated if data is not 256 bytes
#
# Implemented in AppleII::Disk::ProDOS & AppleII::Disk::DOS33
#
# sub write_sector
#=====================================================================
package AppleII::Disk::ProDOS;
#
# Handle ProDOS-order disk images
#---------------------------------------------------------------------
use Carp;
use bytes;
use integer;
use strict;
use warnings;
our @ISA = qw(AppleII::Disk);
#---------------------------------------------------------------------
# Read a block from a ProDOS order disk:
#
# See AppleII::Disk::read_block
sub read_block
{
my $self = shift;
return "\0" x 0x200
if $self->seek_block($_[0]) >= $self->{actlen}; # Past EOF
my $buffer = '';
read($self->{file},$buffer,0x200) or die;
$buffer;
} # end AppleII::Disk::ProDOS::read_block
#---------------------------------------------------------------------
# FIXME AppleII::Disk::ProDOS::read_sector not implemented yet
#---------------------------------------------------------------------
# Seek to the beginning of a block:
#
# Input:
# block: The block number to seek to
#
# Returns:
# The new position of the file pointer
sub seek_block
{
my ($self, $block) = @_;
my $pos = $block * 0x200;
croak("Invalid block number $block")
if $pos < 0 or $pos >= $self->{maxlen};
$self->{file}->seek($pos,0) or die;
$pos;
} # end AppleII::Disk::ProDOS::seek_block
#---------------------------------------------------------------------
# Write a block from a ProDOS order disk:
#
# See AppleII::Disk::write_block
sub write_block
{
my ($self, $block, $data, $pad) = @_;
croak("Disk image is read/only") unless $self->{writable};
$data = AppleII::Disk::pad_block($data, $pad || '');
my $pos = $self->seek_block($block);
print {$self->{file}} $data or die;
$self->{actlen} = $pos + 0x200 unless $self->{actlen} > $pos;
} # end AppleII::Disk::ProDOS::write_block
#=====================================================================
package AppleII::Disk::DOS33;
#
# Handle DOS 3.3-order disk images
#---------------------------------------------------------------------
#$debug = 1;
use Carp;
use bytes;
use integer;
use strict;
use warnings;
our @ISA = qw(AppleII::Disk);
#---------------------------------------------------------------------
# Convert ProDOS block number to track & sectors:
{ my @sector1 = ( 0, 13, 11, 9, 7, 5, 3, 1);
my @sector2 = (14, 12, 10, 8, 6, 4, 2, 15);
sub block2sector
{
my $block = shift;
my $offset = $block % 8;
($block/8, $sector1[$offset], $sector2[$offset]); # INTEGER division
} # end block2sector
}
#---------------------------------------------------------------------
# Read a block from a DOS 3.3 order disk:
#
# See AppleII::Disk::read_block
sub read_block
{
my ($self, $block) = @_;
my ($track, $sector1, $sector2) = block2sector($block);
$self->read_sector($track,$sector1) . $self->read_sector($track,$sector2);
} # end AppleII::Disk::DOS33::read_block
#---------------------------------------------------------------------
# Read a DOS 3.3 sector:
#
# See AppleII::Disk::read_sector
sub read_sector
{
my $self = shift;
return "\0" x 0x100
if $self->seek_sector(@_[0..1]) >= $self->{actlen}; # Past EOF
my $buffer = '';
read($self->{file},$buffer,0x100) or die;
$buffer;
} # end AppleII::Disk::DOS33::read_sector
#---------------------------------------------------------------------
# Seek to the beginning of a sector:
#
# Input:
# track: The track number to seek to
# sector: The sector number to seek to
#
# Returns:
# The new position of the file pointer
sub seek_sector
{
my ($self, $track, $sector) = @_;
my $pos = $track * 0x1000 + $sector * 0x100;
croak("Invalid position track $track sector $sector")
if $pos < 0 or $pos >= $self->{maxlen};
$self->{file}->seek($pos,0) or die;
$pos;
} # end AppleII::Disk::DOS33::seek_sector
#---------------------------------------------------------------------
# Write a sector to a DOS 3.3 order image:
#
# See AppleII::Disk::write_sector
sub write_sector
{
my ($self, $track, $sector, $data, $pad) = @_;
croak("Disk image is read/only") unless $self->{writable};
$data = AppleII::Disk::pad_block($data, $pad || '', 0x100);
my $pos = $self->seek_sector($track, $sector);
print {$self->{file}} $data or die;
$self->{actlen} = $pos + 0x100 unless $self->{actlen} > $pos;
} # end AppleII::Disk::DOS33::write_sector
#---------------------------------------------------------------------
# Write a block to a DOS33 order disk:
#
# See AppleII::Disk::write_block
sub write_block
{
my ($self, $block, $data, $pad) = @_;
croak("Disk image is read/only") unless $self->{writable};
my ($track, $sector1, $sector2) = block2sector($block);
$data = AppleII::Disk::pad_block($data, $pad || '');
$self->write_sector($track, $sector1, substr($data,0,0x100));
$self->write_sector($track, $sector2, substr($data,0x100,0x100));
} # end AppleII::Disk::DOS33::write_block
#=====================================================================
# Package Return Value:
1;
__END__
=head1 NAME
AppleII::Disk - Block-level access to Apple II disk image files
=head1 VERSION
This document describes version 0.201 of
AppleII::Disk, released September 12, 2015
as part of AppleII-LibA2 version 0.201.
=head1 SYNOPSIS
use AppleII::Disk;
my $disk = AppleII::Disk->new('image.dsk');
my $data = $disk->read_block(1); # Read block 1
$disk->write_block(1, $data); # And write it back :-)
=head1 DESCRIPTION
C<AppleII::Disk> provides block-level access to the Apple II disk
image files used by most Apple II emulators. (For information about
Apple II emulators, try the Apple II Emulator Page at
L<http://www.ecnet.net/users/mumbv/pages/apple2.shtml>.) For a
higher-level interface, use the L<AppleII::ProDOS> module.
C<AppleII::Disk> provides the following methods:
=over 4
=item $disk = AppleII::Disk->new($filename, [$mode])
Constructs a new C<AppleII::Disk> object. C<$filename> is the name of
the image file. The optional C<$mode> is a string specifying how to
open the image. It can consist of the following characters (I<case
sensitive>):
r Allow reads (this is actually ignored; you can always read)
w Allow writes
d Disk image is in DOS 3.3 order
p Disk image is in ProDOS order
If you don't specify 'd' or 'p', then the format is guessed from the
filename. '.PO' and '.HDV' files are ProDOS order, and anything else
is assumed to be DOS 3.3 order.
If you specify 'w' to allow writes, then the image file is created if
it doesn't already exist.
=item $size = $disk->blocks([$newsize])
Gets or sets the size of the disk in blocks. C<$newsize> is the new
size of the disk in blocks. If C<$newsize> is omitted, then the size
is not changed. Returns the size of the disk image in blocks.
This refers to the I<logical> size of the disk image. Blocks outside
the physical size of the disk image read as all zeros. Writing to
such a block will expand the image file.
When you create a new image file, you must use C<blocks> to set its
size before writing to it.
=item $contents = $disk->read_block($block)
Reads one block from the disk image. C<$block> is the block number to
read.
=item $contents = $disk->read_blocks(\@blocks)
Reads a sequence of blocks from the disk image. C<\@blocks> is a
reference to an array of block numbers. As a special case, block 0
cannot be read by this method. Instead, it returns a block full of 0
bytes. This is how sparse files are implemented. If you want to read
the actual contents of block 0, you must call $disk->read_block(0)
directly.
=item $contents = $disk->read_sector($track, $sector)
Reads one sector from the disk image. C<$track> is the track number,
and C<$sector> is the DOS 3.3 logical sector number. This is
currently implemented only for DOS 3.3 order images.
=item $disk->fully_allocate()
Expands the the physical size of the disk image file to match the
logical size of the disk image. It will be expanded as a sparse file
if the filesystem containing the image file supports sparse files.
=item $disk->write_block($block, $contents, [$pad])
Writes one block to the disk image. C<$block> is the block number to
write. C<$contents> is the data to write. The optional C<$pad> is a
character to pad the block with (out to 512 bytes). If C<$pad> is
omitted or null, then C<$contents> must be exactly 512 bytes.
=item $disk->write_blocks(\@blocks, $contents, [$pad])
Writes a sequence of blocks to the disk image. C<\@blocks> is a
reference to an array of block numbers to write. C<$contents> is the
data to write. It is broken up into 512 byte chunks and written to
the blocks. The optional C<$pad> is a character to pad the data with
(out to a multiple of 512 bytes). If C<$pad> is omitted or null, then
C<$contents> must be exactly 512 bytes times the number of blocks.
As a special case, block 0 cannot be written by this method. Instead,
that block of C<$contents> is just skipped. This is how sparse files
are implemented. If you want to write the contents of block 0, you
must call $disk->write_block directly.
=item $disk->write_sector($track, $sector, $contents, [$pad])
Writes one sector to the disk image. C<$track> is the track number,
and C<$sector> is the DOS 3.3 logical sector number. C<$contents> is
the data to write. The optional C<$pad> is a character to pad the
sector with (out to 256 bytes). If C<$pad> is omitted or null, then
C<$contents> must be exactly 256 bytes. This is currently implemented
only for DOS 3.3 order images.
=item $padded = AppleII::Disk::pad_block($data, [$pad, [$length]])
Pads C<$data> out to C<$length> bytes with C<$pad>. Returns the
padded string; the original is not altered. Dies if C<$data> is
longer than C<$length>. The default C<$pad> is "\0", and the default
C<$length> is 512 bytes.
If C<$pad> is the null string (not undef), just checks to make sure
that C<$data> is exactly C<$length> bytes and returns the original
string. Dies if C<$data> is not exactly C<$length> bytes.
C<pad_block> is a subroutine, not a method, and is not exported. You
probably don't need to call it directly anyway, because the
C<write_XXX> methods will call it for you.
=back
=for Pod::Coverage
^pad_block$
=head1 CONFIGURATION AND ENVIRONMENT
AppleII::Disk requires no configuration files or environment variables.
=head1 INCOMPATIBILITIES
None reported.
=head1 BUGS AND LIMITATIONS
No bugs have been reported.
=head1 AUTHOR
Christopher J. Madsen S<C<< <perl AT cjmweb.net> >>>
Please report any bugs or feature requests
to S<C<< <bug-AppleII-LibA2 AT rt.cpan.org> >>>
or through the web interface at
L<< http://rt.cpan.org/Public/Bug/Report.html?Queue=AppleII-LibA2 >>.
You can follow or contribute to AppleII-LibA2's development at
L<< https://github.com/madsen/perl-libA2 >>.
=head1 COPYRIGHT AND LICENSE
This software is copyright (c) 2015 by Christopher J. Madsen.
This is free software; you can redistribute it and/or modify it under
the same terms as the Perl 5 programming language system itself.
=head1 DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH
YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENSE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
=cut