1.000133 2022-09-07 13:44:03-07:00 America/Los_Angeles
- Order tests with conflicts earlier than others
1.000132 2022-09-07 09:42:06-07:00 America/Los_Angeles
- Further improve resource command and file
1.000131 2022-09-06 15:53:55-07:00 America/Los_Angeles
- Use relative file paths for job slot display
1.000130 2022-09-06 14:39:43-07:00 America/Los_Angeles
- Better resource display
- Fix #255 (.test_info.json being left behind)
- Fix issue where not all resources will be loaded by resource command
1.000129 2022-09-06 11:20:38-07:00 America/Los_Angeles
- Fix issue with job slots sometimes being doubled when tests are skipped
1.000128 2022-09-02 13:01:09-07:00 America/Los_Angeles
- Fix issue where yath might exit before all output is rendered
- Add scheduler process
- Fix --color flag (Thanks James Raspass, #246)
- Fix spelling mistakes (Thanks bernhard, #249)
1.000127 2022-08-31 08:32:44-07:00 America/Los_Angeles
- Remove unnecessary Carp::Always
1.000126 2022-08-30 11:09:19-07:00 America/Los_Angeles
- Add 'yath resources' command to view resource usage
1.000125 2022-07-08 15:50:11-07:00 America/Los_Angeles
- Change -jN to use a resource class instead of hard-coding it into State.pm
- Fix bug in how a POSIX function is called
1.000124 2022-04-08 12:26:14-07:00 America/Los_Angeles
- Fix bug where see `yath status` was being shown for non-persistent runs
- Make 'busy' message shorter so it is less likely to be truncated
1.000123 2022-04-06 13:34:10-07:00 America/Los_Angeles
- Fix bug where spawns would not run if queued before stages were ready
1.000122 2022-04-06 11:04:43-07:00 America/Los_Angeles
- Fix another id vs uuid typo
1.000121 2022-04-06 10:46:35-07:00 America/Los_Angeles
- Fix bug introduced by my last fix... oops
1.000120 2022-04-06 10:17:48-07:00 America/Los_Angeles
- Fix bug where a stage reload would re-run all previously requested spawns
1.000119 2022-04-05 10:58:59-07:00 America/Los_Angeles
- Allow per-test args to be specified at the command line
1.000118 2022-04-05 09:39:40-07:00 America/Los_Angeles
- Do not show broken reload files multiple times
1.000117 2022-04-04 16:09:58-07:00 America/Los_Angeles
- Check for reload errors before allowing a `yath run` to work
1.000116 2022-04-01 15:29:40-07:00 America/Los_Angeles
- Better handling of version mismatches in the persistent runner
- Better info when a `run` command is waiting on a busy runner
1.000115 2022-03-31 10:28:14-07:00 America/Los_Angeles
- Fix reload bug when using restricted reload
- Fix bug where inotify would only report changes once
1.000114 2022-03-24 09:27:03-07:00 America/Los_Angeles
- Fix bug when inotify is not installed
- Make yath better at detecting when 2 files are the same
1.000113 2022-03-23 09:36:57-07:00 America/Los_Angeles
- Refactor preloader into preloader and reloader
- Honor churn blocks during relead events even if --reload is disabled
1.000112 2022-03-15 14:21:29-07:00 America/Los_Angeles
- Add --rerun and --rerun-failed options to test/run command
- Add lastlog.jsonl.* symlink creation to auto-link to the last log produced
1.000111 2022-03-09 15:07:10-08:00 America/Los_Angeles
- Better handling and checking of persistence files
1.000110 2022-02-24 11:50:52-08:00 America/Los_Angeles
- Add 'tick()' method to resource classes
1.000109 2022-02-22 12:07:11-08:00 America/Los_Angeles
- Do not initialize resources in `yath run`
- Add command to settings->harness
- Add from_runner to settings included from a persistent runner
- Fix temp dir issue in macos
1.000108 2022-02-11 15:23:10-08:00 America/Los_Angeles
- Add ability for resource managers to report resources as unavailable ot skip tests
- Add setup method for resource managers
1.000107 2022-02-10 08:49:19-08:00 America/Los_Angeles
- Clean up FIFO in interactive mode with a persistent runner
1.000106 2022-02-08 10:10:38-08:00 America/Los_Angeles
- Fix uninitialized warning
1.000105 2022-02-08 09:52:32-08:00 America/Los_Angeles
- Make changes_diff work with or without prefixes in the filenames
1.000104 2022-02-04 11:00:29-08:00 America/Los_Angeles
- Add settings ot paremeter list for coverage managers
1.000103 2022-02-04 10:20:32-08:00 America/Los_Angeles
- Add options to for whitespace and non-subs in change data
--changes-include-whitespace - Include whitespace lines for change data
--changes-exclude-nonsub - Do not include non-sub changes in perl files
--changes-exclude-opens - Do not include tests that only open() changed files
--changes-exclude-loads - Do not include tests that only load changed files without running subs
1.000102 2022-02-03 15:28:54-08:00 America/Los_Angeles
- Remove warning that can trigger in valid (not warn-worthy) cases.
1.000101 2022-02-02 13:26:35-08:00 America/Los_Angeles
- Fix 'replay' output of subtests
1.000100 2022-02-01 09:49:52-08:00 America/Los_Angeles
- Mark reload_syntax_error.t as AUTHOR_TESTING only (#243)
- Add threshold for duration data fetching, this saves time when duration data is large
1.000099 2022-01-27 10:20:38-08:00 America/Los_Angeles
- Add options to exclude some chnaged files when running coverage tests
1.000098 2022-01-27 09:36:24-08:00 America/Los_Angeles
- Fix bugs in 'failed' command after adding subtests
1.000097 2022-01-27 08:31:46-08:00 America/Los_Angeles
- Show subtest failures in 'failed' command
1.000096 2022-01-26 14:42:43-08:00 America/Los_Angeles
- Show failed subtests in final summary
- Fix bug where env vars get removed when we preload Test2::API too early (#241)
- Fix bug where replay with test filename has uninitialized warnings (#242)
1.000095 2022-01-07 14:35:25-08:00 America/Los_Angeles
- Fix bug where syntax errors prevented reloading of effected files
1.000094 2022-01-05 13:51:40-08:00 America/Los_Angeles
- Fix logic so that tests for changed files are only added when requested
- Pass all changes to the coverage managers
1.000093 2021-12-16 15:19:47-08:00 America/Los_Angeles
- Split out 'get_coverage_tests' logic for reuse
1.000092 2021-12-16 10:39:37-08:00 America/Los_Angeles
- Add plugin hook for post-processing of coverage data.
1.000091 2021-12-15 12:09:09-08:00 America/Los_Angeles
- Add more reload capabilities (non-perl reloading, callbacks)
1.000090 2021-12-14 12:43:11-08:00 America/Los_Angeles
- Fix bug in status command when only 1 run is present
1.000089 2021-12-14 12:12:05-08:00 America/Los_Angeles
- Add several commands for managing persisten runners
- yath kill - Kill the runner and all tests (stop NOW)
- yath ps - Show running yath process list
- yath status - Show processes and health status
- yath abort - Cancel any running or queued test, but do not kill runner
- Control+C in `yath run` does a better job of cleaning up
1.000088 2021-12-13 11:29:24-08:00 America/Los_Angeles
- Skip tests that do not exists when running coverage tests
1.000087 2021-12-09 13:51:59-08:00 America/Los_Angeles
- Add --procname-prefix option to add custom strings to procnames
1.000086 2021-12-07 13:40:40-08:00 America/Los_Angeles
- Add 'HARNESS-CHURN-XXX' directive support
1.000085 2021-12-06 16:28:51-08:00 America/Los_Angeles
- Make 'do' actually work
1.000084 2021-12-06 15:59:23-08:00 America/Los_Angeles
- Add 'do' command that has the magic of picking run or test as needed
1.000083 2021-12-03 10:18:27-08:00 America/Los_Angeles
- Add options for controlling runner output, specially for `yath run`
1.000082 2021-11-18 09:04:17-08:00 America/Los_Angeles
- Make collector options configurable
- Add collector option for max poll events
- Add collector option for max open jobs
- Turn warnings about too many open files into proper events
1.000081 2021-11-15 13:27:48-08:00 America/Los_Angeles
- Retry opening files later when "too many files open" errors occur
1.000080 2021-11-04 11:13:07-07:00 America/Los_Angeles
- Add sort_files_2 for plugins to add settings and future-proof it
1.000079 2021-10-29 10:42:39-07:00 America/Los_Angeles
- smarter reloader, bit via callbacks, not assumptions
1.000078 2021-10-28 15:38:10-07:00 America/Los_Angeles
- Disable the feature from the last commit, it needs rethinking thanks to
things like Moose.
1.000077 2021-10-28 15:14:09-07:00 America/Los_Angeles
- Make reloader smarter, do not delete subs from other files when reloading a file
1.000076 2021-10-22 10:29:22-07:00 America/Los_Angeles
- Add relative filename to the queued task
1.000075 2021-10-21 14:05:27-07:00 America/Los_Angeles
- Fix missing Changes entry for last release
1.000074 2021-10-20 09:58:05-07:00 America/Los_Angeles
- Better coverage aggregation and plugin capabilities
1.000073 2021-09-21 10:25:42-07:00 America/Los_Angeles
- Load coverage module EARLY in the runner spawn process
- Add ability to for plugins to inject CLI options for the runner
1.000072 2021-09-13 09:29:54-07:00 America/Los_Angeles
- Wrap fifo creation in a loop for interrupted system calls
1.000071 2021-09-03 08:26:04-07:00 America/Los_Angeles
- Allow custom subclasses with cover plugin
1.000070 2021-09-01 13:36:50-07:00 America/Los_Angeles
- Improve reload inotify logic
1.000069 2021-08-31 14:07:54-07:00 America/Los_Angeles
- Add interactive mode!
1.000068 2021-08-30 09:52:12-07:00 America/Los_Angeles
- Expand --cover-dir options with glob()
1.000067 2021-08-27 11:32:10-07:00 America/Los_Angeles
- Add option to only reload repo directories
1.000066 2021-08-12 13:48:06-07:00 America/Los_Angeles
- Fix 'Cover' plugin to record untested perl files
1.000065 2021-08-04 15:11:59-07:00 America/Los_Angeles
- Fix 'Cover' plugin bugs and edge cases
1.000064 2021-08-02 15:23:04-07:00 America/Los_Angeles
- Add more capabilities for plugins
- Add the 'Cover' plugin to handle coverage in a better way
1.000063 2021-07-14 09:44:17-07:00 America/Los_Angeles
- Add diags/notes to notification problem-capture
1.000062 2021-07-07 15:34:34-07:00 America/Los_Angeles
- Add info on where/why 'claim_file' was called
1.000061 2021-07-07 12:53:11-07:00 America/Los_Angeles
- Add even more support for notification plugins
1.000060 2021-07-06 09:51:45-07:00 America/Los_Angeles
- Add support for html email
1.000059 2021-07-01 13:56:29-07:00 America/Los_Angeles
- Add support for custom email/slack text
1.000058 2021-06-15 15:38:16-07:00 America/Los_Angeles
- Add support for new yathui direct db coverage/duration plugin
- Add option to disable bail-out abortion
1.000057 2021-06-04 15:59:24-07:00 America/Los_Angeles
- Add ability to provide a diff for changed files
- Add ability to filter files with changes
1.000056 2021-05-24 14:26:45-07:00 America/Los_Angeles
- Fix warnings from preloader
1.000055 2021-05-18 13:05:20-07:00 America/Los_Angeles
- Run 'conficting' tests sooner
1.000054 2021-05-04 08:58:25-07:00 America/Los_Angeles
- Add option to dump depmaps
1.000053 2021-04-30 11:22:30-07:00 America/Los_Angeles
- Be smarter about what can or cannot be reloaded in 'reload' mode
1.000052 2021-04-30 10:37:56-07:00 America/Los_Angeles
- Add --reload option to 'start' command to reload moduels in-place when possible
- Make Test2::Plugin::Cover optional again
1.000051 2021-04-29 07:40:33-07:00 America/Los_Angeles
- Fix an edge-case warning from git plugin
1.000050 2021-04-27 09:22:25-07:00 America/Los_Angeles
- Allow a default coverage manager to be provided
- Move Test2::Require::Module to dev requirements
- Update some modules from 'base' to 'parent'
1.000049 2021-04-26 08:08:05-07:00 America/Los_Angeles
- Fully require Test2::Plugin::Cover at a sufficient version
1.000048 2021-04-23 11:54:37-07:00 America/Los_Angeles
- Require updated Test2::Plugin::Cover
- Better coverage handling, sync with newer Test2::Plguin::Cover
1.000047 2021-04-20 11:42:49-07:00 America/Los_Angeles
- Remove some coverage data that was nto intended to be present (false data)
1.000046 2021-04-20 09:25:24-07:00 America/Los_Angeles
- Remove debugging print statement
1.000045 2021-04-20 09:14:01-07:00 America/Los_Angeles
- Change how coverage and changed-files data works
1.000044 2021-03-11 20:08:54-08:00 America/Los_Angeles
- Add plugin support for providing coverage/duration data
- Fix running t/integration tests with ./ in path (#215)
- Add a fixme/todo test for #216 (Tap subtest parsing)
1.000043 2021-03-05 07:47:04-08:00 America/Los_Angeles
- Minor documentation correction
- Add 'signal()' method to Renderer base class
1.000042 2020-11-17 22:44:35-08:00 America/Los_Angeles
- Fix pipe size setting to actually use the value we want
- Fix pipe size setting code for older perls
1.000041 2020-11-17 22:28:55-08:00 America/Los_Angeles
- When possible use a larger pipe buffer
1.000040 2020-11-17 21:59:41-08:00 America/Los_Angeles
- Fix bug in collector that made it marginally less efficient
- Fix bug that prevented no-max from working in JobDir poll
- Fix bug that prevented the active status display from updating
1.000039 2020-11-17 19:54:08-08:00 America/Los_Angeles
- yath watch shows aux output
- Minor no-op code improvement in Runner.pm
1.000038 2020-11-02 20:49:12-08:00 America/Los_Angeles
- Add shellcall and aux output capture for plugins
1.000037 2020-11-02 14:31:10-08:00 America/Los_Angeles
- Fix conflict between process management and resource management
1.000036 2020-11-01 20:34:19-08:00 America/Los_Angeles
- Add initializing status line
1.000035 2020-10-29 15:00:33-07:00 America/Los_Angeles
- Add glob() and relgob() .yath.rc pseudo-functions
- Document rel() .yath.rc pseudo-function
1.000034 2020-10-29 07:51:19-07:00 America/Los_Angeles
- Fix warning when output is not a terminal
1.000033 2020-10-28 16:37:19-07:00 America/Los_Angeles
- Better status line while tests are running
- Do not use --START-- and --END-- on long single-lines
1.000032 2020-10-23 11:59:34-07:00 America/Los_Angeles
- Make it possible to run an alternate file to the one specified
1.000031 2020-10-22 11:27:59-07:00 America/Los_Angeles
- Fix incorrect return from $spawn->args
1.000030 2020-10-21 19:34:45-07:00 America/Los_Angeles
- Add environment variable management to spawn command
- Move spawn logic to overridable methods
1.000029 2020-10-15 13:57:36-07:00 America/Los_Angeles
- Add 'spawn' command
- Fix plan in test.pl
1.000028 2020-09-25 08:43:43-07:00 America/Los_Angeles
- Fix issue where args after :: were ignored (#195)
1.000027 2020-09-21 11:46:43-07:00 America/Los_Angeles
- Move dbi_profile and cover_Files to run
1.000026 2020-09-08 13:37:50-07:00 America/Los_Angeles
- Make nytprof work in persistent mode
1.000025 2020-09-08 11:29:07-07:00 America/Los_Angeles
- Fix edge case where STDIN was opened for writing
- Add basic support for nytprof
1.000024 2020-08-24 09:06:43-07:00 America/Los_Angeles
- Add Test2::Harness::Runner::Resource for resource management
1.000023 2020-08-14 21:18:29-07:00 America/Los_Angeles
- No changes since trial
1.000022 2020-08-13 15:18:07-07:00 America/Los_Angeles (TRIAL RELEASE)
- Make failure to chmod things non-fatal to fix bsd testing
- Fix spelling issues
- Make chmod stuff more correct
1.000021 2020-08-04 21:03:28-07:00 America/Los_Angeles (TRIAL RELEASE)
- Add changed_files plugin hook
- Make git plugin support changed_files hook
- Add Test2::Harness::Log docs
- Add 'cover-files' option using Test2::Plugin::Cover
- Add coverage aggregator tool
- Add ability to run tests that cover changed files
- Add dbi-profiling option
- Fix permissions on temp dirs (may still have some issues)
1.000020 2020-07-08 22:25:23-07:00 America/Los_Angeles
- reduce version of Data::UUID required
- Allow filenames in replay
- Add 'cover_files' shortcut for Test2::Plugin::Cover
1.000019 2020-05-30 11:07:09-07:00 America/Los_Angeles
- Typo Fix in error message
- Do not die on 0 failures
1.000018 2020-04-13 13:35:34-07:00 America/Los_Angeles
- Stop leaving leftover files in /tmp
1.000017 2020-04-07 15:47:42-07:00 America/Los_Angeles
- Fix log_dir test on macos
1.000016 2020-04-07 15:14:00-07:00 America/Los_Angeles
- Fix #! in yath script
- Fix 'DEFAULT' and 'IGNORE' signal inheritence
- Fix log-dir specificiation (#174)
1.000015 2020-03-23 11:49:38-07:00 America/Los_Angeles
- YathUI plugin improvements (show url, show errors)
- Add more compression options to open_file
1.000014 2020-03-21 18:20:37-07:00 America/Los_Angeles
- Add YathUI plugin
- Fix maybe_durations option
1.000013 2020-03-18 13:16:20-07:00 America/Los_Angeles
- Minor doc change
1.000012 2020-03-18 13:09:14-07:00 America/Los_Angeles
- Fix #172 qvf+verbose
- Fix #169 log path in 'run' command
- Fix #168 - :: mistaken for command name
- Fix #171 summary should only be shown when applicable
- Fix #171 Add --brief option to 'failed' command
1.000011 2020-03-09 09:12:25-07:00 America/Los_Angeles
- Fix notifications so that all failed tests are shown
1.000010 2020-03-08 15:15:24-07:00 America/Los_Angeles
- Fix missing Launch in verbose mode
- Restore HARNESS_IS_VERBOSE env variable
- Fix #163 where 1 concurrent job would get stuck reducing concurrency
1.000009 2020-03-06 14:05:23-08:00 America/Los_Angeles
- Add HARNESS-NO-RETRY
1.000008 2020-03-06 08:17:29-08:00 America/Los_Angeles
- Add --exclude-list option
1.000007 2020-03-05 13:55:01-08:00 America/Los_Angeles
- Fix __FILE__ value in 'projects' command
1.000006 2020-03-03 15:32:49-08:00 America/Los_Angeles
- Provide methods in TestFile that let you get/set retry
1.000005 2020-03-02 14:48:40-08:00 America/Los_Angeles
- Use --qvf in test.pl for better output
- Use -r1 in test.pl temporarily for some cpantesters
1.000004 2020-03-02 10:05:10-08:00 America/Los_Angeles
- Switch away from sys-io in Util::File::Stream
- Properly wrap FLOCK to handle interrupted syscalls
- Remove unnecessary IPC::Open3 dep
- Remove unnecessary Module::Pluggable dep
- Add missing require statement
1.000003 2020-03-01 21:50:08-08:00 America/Los_Angeles
- Do not run persistent tests in AUTOMATED_TESTING
1.000002 2020-03-01 21:19:04-08:00 America/Los_Angeles
- Fix integration tests IO issues
1.000001 2020-02-29 10:49:11-08:00 America/Los_Angeles
- Do not run tests on broken NJH smokers
1.000000 2020-02-28 09:30:47-08:00 America/Los_Angeles
- No changes since last trial release
- This is the first stable release
- Huge changes/refactor from the alpha versions
0.999010 2020-02-27 21:52:25-08:00 America/Los_Angeles (TRIAL RELEASE)
- Make signals.t author-testing
- Cleanup failure-test
- Show timeout delta when timing out a test
0.999009 2020-02-27 07:27:29-08:00 America/Los_Angeles (TRIAL RELEASE)
- Fix sorting in ordering tests
- Fix incorrect line numbers in plugin.t errors
- Less fragile fork check in Makefile.PL
0.999008 2020-02-26 20:25:34-08:00 America/Los_Angeles (TRIAL RELEASE)
- Only officially support systems with true fork().
0.999007 2020-02-26 16:52:46-08:00 America/Los_Angeles (TRIAL RELEASE)
- Fix IOStream permissions issues
0.999006 2020-02-26 15:39:28-08:00 America/Los_Angeles (TRIAL RELEASE)
- Do not use IOEvents by default
0.999005 2020-02-25 14:02:01-08:00 America/Los_Angeles (TRIAL RELEASE)
- Remove blib from tarball
- Fix tests when outdated plugins are present
0.999004 2020-02-25 07:48:30-08:00 America/Los_Angeles (TRIAL RELEASE)
- Warn+Skip when auto-loading outdated plugins
0.999003 2020-02-24 14:51:18-08:00 America/Los_Angeles (TRIAL RELEASE)
- Fix older perls (down to 5.10)
0.999002 2020-02-24 08:56:06-08:00 America/Los_Angeles (TRIAL RELEASE)
- Fix installation when an old yath is installed
0.999001 2020-02-23 15:42:47-08:00 America/Los_Angeles (TRIAL RELEASE)
- Attempt to fix includes integration test
0.999000 2020-02-23 10:19:36-08:00 America/Los_Angeles (TRIAL RELEASE)
- Huge refactor
- Fix signal restoration for forked tests
0.001099 2019-09-09 21:12:15-07:00 America/Los_Angeles
- Add --durations and --maybe_durations options
0.001098 2019-09-09 13:35:22-07:00 America/Los_Angeles
- Add current dir to run data
- Add rel/abs paths to harness_job_start/end
0.001097 2019-09-08 19:22:56-07:00 America/Los_Angeles
- Add speedtag command
0.001096 2019-09-08 15:24:00-07:00 America/Los_Angeles
- Cleanup help options a bit
- Split category into category and duration
- Clean up the ProcMan module
- Tests start as their own process groups
0.001095 2019-09-04 15:38:07-07:00 America/Los_Angeles
- Fix logging of plugin when it is blessed
0.001094 2019-09-04 14:44:55-07:00 America/Los_Angeles
- Improve+Test SysInfo and Git Plugins
0.001093 2019-09-03 13:23:04-07:00 America/Los_Angeles
- Add branch info to git data
0.001092 2019-09-03 10:32:46-07:00 America/Los_Angeles
- Minor tweaks to SysInfo and Git plugins
0.001091 2019-08-30 14:03:19-07:00 America/Los_Angeles
- Add Yath::Plugin::SysInfo
0.001090 2019-08-30 10:22:23-07:00 America/Los_Angeles
- Allow specifying run-fields as JSON
0.001089 2019-08-30 09:05:59-07:00 America/Los_Angeles
- Allow listing run-fields on the command line
0.001088 2019-08-29 23:23:47-07:00 America/Los_Angeles
- Abstract and correct timing data collection
0.001087 2019-08-29 12:54:23-07:00 America/Los_Angeles
- Fix incorrect timestamps
0.001086 2019-08-28 14:19:57-07:00 America/Los_Angeles
- Fix overall harness run time where HiRes was only used for start time,
not end time (sometimes resulting in a negative run time being printed)
- Do not use Test2::Plugin::Times
- Use event based timing data for -T
- remove --times flag
- Support for non-perl tests
0.001085 2019-08-21 16:49:20-07:00 America/Los_Angeles
- Do not require DBIProfile yet until we need it (#111)
- Standardize how fields are specified
0.001084 2019-08-16 20:08:48-07:00 America/Los_Angeles
- Make More information available to plugins
0.001083 2019-08-16 19:55:17-07:00 America/Los_Angeles
- Split out some plugins (DBIProfile, MemUsage, UUID)
- No special treatment for plugins, they need to use INFO facets
0.001082 2019-08-15 11:03:22-07:00 America/Los_Angeles
- Support 'END' phase in calculating times
- Support super verbose mode in composer
- Improvement ot DBIProfile
- New minimum Test2 version
0.001081 2019-08-13 13:49:32-07:00 America/Los_Angeles
- Add Git injection plugin
- Add DBI Profile plugin
- Calculate and record timing data
0.001080 2019-07-24 09:56:41-07:00 America/Los_Angeles
- Make it possible to relocate the persistence file
0.001079 2019-07-05 12:56:06-07:00 America/Los_Angeles
- Work around JSON::XS Bug
0.001078 2019-07-02 08:46:49-07:00 America/Los_Angeles
- Document yath log format
0.001077 2019-06-06 15:04:32-07:00 America/Los_Angeles
- Add --retry options (toddr)
- Make sure all events are flushed if there is a sync issue
- Added some tests
0.001076 2019-05-20 14:54:50-07:00 America/Los_Angeles
- Fix TAP parsers nesting parsing
- Dix comment groupign when parsing TAP
0.001075 2019-05-18 18:33:52-07:00 America/Los_Angeles
- Fix Stream+IPC issues
0.001074 2019-05-07 12:04:51-07:00 America/Los_Angeles
- Add support for table structures
0.001073 2019-04-10 08:21:04-07:00 America/Los_Angeles
- Add support for disabled progress indicators to QVF mode
0.001072 2019-04-08 10:27:50-07:00 America/Los_Angeles
- Add option to turn off progress indicators
0.001071 2018-12-13 09:43:38-08:00 America/Los_Angeles
- Add --notify-text CLI option
- Fix exit code parsing and reporting
0.001070 2018-10-24 13:19:53-07:00 America/Los_Angeles
- Allow --author-testing in 'projects' command
- Misc minor changes
0.001069 2018-08-23 13:48:54-07:00 America/Los_Angeles
- Fix busy-spin in job reaper
- Allow --no-fork and --no-preload simultaneously
0.001068 2018-07-27 09:12:45-07:00 America/Los_Angeles
- Fix more encoding/utf8 bugs
- Fix missing dep on sufficient List::Utils version
0.001067 2018-07-18 07:42:06-07:00 America/Los_Angeles
- Add ability to congiure a custom log file format
0.001066 2018-07-12 08:06:46-07:00 America/Los_Angeles
- Fix issue where isolation jobs were being kicked off too early. It needs to wait for all non-isolation jobs to finish first.
- New Feature: # HARNESS-CONFLICTS-XXX
- New documentation for HARNESS-CATEGORY-IMMISCIBLE
- New documentation for HARNESS-TIMEOUT-EVENT
- Get rid of the use of each when walking a hash.
- Allow comment only lines prior to HARNESS-XXX directives
- Accept binary TAP output that is not correctly formatted to UTF8
- Honor multiple spaces (or -) as a delimiter for # HARNESS directives
0.001065 2018-04-22 03:26:57-07:00 America/Los_Angeles
- Fix utf8 double encoding error
0.001064 2018-03-29 22:47:10-07:00 America/Los_Angeles
- Make it possible to chdir for a given test
- Make run automatically chdir to the dir you were in when queuing tests
- Add 'projects' command to run a dir with multiple projects
0.001063 2018-03-27 10:17:02-07:00 America/Los_Angeles
- Make it possible to use relative paths in yath.rc
0.001062 2018-03-19 09:22:18-07:00 America/Los_Angeles
- Fix bug where $, and $\ would break the formatters
0.001061 2018-03-14 12:47:28-07:00 America/Los_Angeles
- No Changes since last trial
0.001060 2018-03-13 11:11:27-07:00 America/Los_Angeles (TRIAL RELEASE)
- Fix parsing of streaming subtests
0.001059 2018-03-12 13:26:43-07:00 America/Los_Angeles
- Job id's are now uuid's. Numbers for humans are now names
- Use UUIDs for event IDs
- Update min Test2 version
0.001058 2018-03-11 15:29:23-07:00 America/Los_Angeles
- Fix broken tests
- Record times by default, but only show when requested
- Add memory usage
- Do not add times from the harness itself
- Add UUIDs to everything
0.001057 2018-03-07 08:09:18-08:00 America/Los_Angeles
- No changes from last trial
0.001056 2018-03-06 13:47:08-08:00 America/Los_Angeles (TRIAL RELEASE)
- Account for the 'hub' facet
0.001055 2018-03-05 20:10:24-08:00 America/Los_Angeles
- Fix error where multiple procs read the same fh at once
0.001054 2018-03-02 09:05:44-08:00 America/Los_Angeles
- Switch Streaming write() to use syswrite
- Fix bug where jobs would re-run after a reload
0.001053 2018-02-27 07:15:53-08:00 America/Los_Angeles
- No changes since last trial
0.001052 2018-02-06 15:03:08-08:00 America/Los_Angeles (TRIAL RELEASE)
- Fix infinite recursion in closed subtests log json
0.001051 2018-02-06 13:29:38-08:00 America/Los_Angeles (TRIAL RELEASE)
- Extract composer logic from Test2 formatter so it can be re-used
- Revamp Watcher to stop mangling events
- Onlt log processed events now by default (since mangling has stopped)
0.001050 2018-02-01 13:31:58-08:00 America/Los_Angeles
- Allow logging of both processed and unprocessed events
- Add finish() hook to loggers
- This is a breaking change for any existing loggers (still alpha! Do not complain!)
0.001049 2018-01-26 14:27:16-08:00 America/Los_Angeles
- Better 'renderer' handling
0.001048 2018-01-23 10:42:16-08:00 America/Los_Angeles
- Make it possible to use multiple renderers at once
- Fix return via next issue
0.001047 2018-01-19 21:58:13-08:00 America/Los_Angeles
- Fix auto-reload for preload mode
0.001046 2018-01-18 10:47:31-08:00 America/Los_Angeles
- Make --qvf show INTERNAL messages (#51)
- Make -v override --qvf (#50)
- Do not show 'no_display' about messages (#44)
0.001045 2018-01-05 08:38:05-08:00 America/Los_Angeles
- Make it possible to toggle --qvf off
- Show files being run in --qvf mode
0.001044 2018-01-02 07:25:06-08:00 America/Los_Angeles
- Add post-run hook to plugins
- Add -V/--version flags
0.001043 2017-12-19 10:12:22-08:00 America/Los_Angeles
- Remove test for deleted file
0.001042 2017-12-18 15:03:26-08:00 America/Los_Angeles
- Better scheduling simplification
0.001041 2017-12-06 11:01:16-08:00 America/Los_Angeles
- Make realtime slack/email of failures possible
- Add QVF (Quiet but verbose on failure) formatter
0.001040 2017-12-04 23:20:35-08:00 America/Los_Angeles
- Fix filehandle IPC leak issue
0.001039 2017-12-04 21:54:24-08:00 America/Los_Angeles
- Simplify scheduling
0.001038 2017-11-30 10:13:09-08:00 America/Los_Angeles
- Minor fixes
- Fix race condition/off by 1 when using the 'run' command
0.001037 2017-11-29 09:44:23-08:00 America/Los_Angeles
- Add slack integrations
- Add support for .yath.user.rc
0.001036 2017-11-28 10:26:36-08:00 America/Los_Angeles
- Harness directives for meta-data
- Add email capabilities
0.001035 2017-11-22 09:59:49-08:00 America/Los_Angeles
- Fix infinite recrusion looking for .yathrc
- Add 'failed' command
0.001034 2017-11-20 09:19:47-08:00 America/Los_Angeles
- Prevent deadlock on win32 (tests do not pass yet in win32)
0.001033 2017-11-18 16:16:52-08:00 America/Los_Angeles
- Add a summarize_events to Test2::Tools::HarnessTester
0.001032 2017-11-15 08:44:40-08:00 America/Los_Angeles
- Add an extra @INC hook in persistent mode for dep tracing
0.001031 2017-11-03 09:18:56-07:00 America/Los_Angeles
- Remove Debug tool that used sigusr1
- Fix support for perls as far back as 5.8.9
0.001030 2017-11-01 13:24:17-07:00 America/Los_Angeles
- Make tests work witohut old version installed
- Do not use shm by default
- add tests for replay command
- better test.pl
- use clone_io instead of hand rolling it (Formatter)
- doc fixes
- make sure test.pl does not run itself
0.001029 2017-10-31 14:53:52-07:00 America/Los_Angeles
- Move away from IPC::Open3
0.001028 2017-10-31 09:35:23-07:00 America/Los_Angeles
- More test coverage improvements
0.001027 2017-10-27 15:11:57-07:00 America/Los_Angeles
- Do not inject a HASHREF as an env var key
- Improved test coverage
- Added a test helper for commands (including third party ones)
- Do not remove newlines from stdout
- Merge sequential stdout/stderr lines
- Add minimal test descriptions
0.001026 2017-10-24 10:00:34-07:00 America/Los_Angeles
- Fix a couple commands that broke due ot @INC fixes
0.001025 2017-10-24 09:40:28-07:00 America/Los_Angeles
- Require a newer goto-file to avoid changing exceptions
- Allow control of default search locations
- stop command now prints all to stdout
0.001024 2017-10-23 12:12:53-07:00 America/Los_Angeles
- Make sure @INC is set as soon as possible
- Do not let a file hide a command
0.001023 2017-10-20 22:16:33-07:00 America/Los_Angeles
- Update to a newer HashBase
0.001022 2017-10-20 07:12:19-07:00 America/Los_Angeles
- Minor test updates
0.001021 2017-10-13 11:02:22-07:00 America/Los_Angeles
- More @INC corrections
- DepTracer no longer mangles caller.
0.001020 2017-10-13 07:34:02-07:00 America/Los_Angeles
- Use the correct @INC in all preload methods
0.001019 2017-10-11 10:08:14-07:00 America/Los_Angeles
- Don't call find_yath() if we already found a yath (Matthew Horsfall)
- Minor display optimizations
0.001018 2017-10-10 14:42:16-07:00 America/Los_Angeles
- Fix a DESTROY typo (Michael McClimon)
- Test2::Harness namespace does not use App::Yath namespace
- Package delcaration allowed before harness directives
- When respawning a stage may exit badly, nobody cares
- Fix scheduling properly this time
- Record timing data for all events
- Stop using expensive canonical JSON for logs
- Better $0 handling
0.001017 2017-10-07 16:24:01-07:00 America/Los_Angeles
- Fix scheduling
- Add 'times' tool
- Put skip reason on same line as filename
0.001016 2017-10-03 07:14:08-07:00 America/Los_Angeles
- More test coverage
- Added --cover option
- Added --dummy option
- Improved 'start', 'stop', and 'run'
- Remove chdir option
- Fix broken replay command
- Fix some deadlock conditions
- Cleaner output
- Do not wrap long output lines when output is not a terminal
- DZIL generates some docs now
- Minor bug fixes and improvements
- Improved performance of the parser
- Add # HARNESS-TIMEOUT-[TYPE] ## header support
- Add -q|--quiet mode
- Do not try to kill job after post-exit timeout
- Remove the tcm plugin (it is failure)
- Handle sync points when incomplete lines are written
0.001015 2017-09-15 08:55:30-07:00 America/Los_Angeles
- Put lib, blib, and -I's before system libs (Fixes #31)
- Bump minimum goto-file version (Fixes #30)
- Use $Config for path seperator instead of ':'
0.001014 2017-09-14 21:27:29-07:00 America/Los_Angeles
- Pass-Through $ENV{PERL5LIB}
0.001013 2017-09-14 18:29:49-07:00 America/Los_Angeles
- Put back code that was accidentally removed
0.001012 2017-09-14 15:19:19-07:00 America/Los_Angeles
- Fix dep list
0.001011 2017-09-14 14:27:32-07:00 America/Los_Angeles
- Fix bug where no-fork skipped tests
- Use relative paths for tests in $0, __FILE__, and caller
0.001010 2017-09-14 10:31:35-07:00 America/Los_Angeles
- Pull out the filter into goto::file
- Do not use filter for tests that come back as subrefs
- Improve TCM plugin
- Fix timeouts (again)
- Remove unused variable
- Stop waiting for a test once it is killed
- Fix Typos
- Some bug fixes
0.001009 2017-09-12 23:10:05-07:00 America/Los_Angeles
- Better docs
- More testing
- Minor bug fixes
0.001008 2017-09-12 13:49:05-07:00 America/Los_Angeles
NOW Feature-complete!
(Needs docs and tests)
- Fix dep versions in dist.ini
- Improve test coverage
- Better test.pl detection by yath command
- Add color/no-color options
- Support for project .yath.rc files
- Make sure $VERSION is in correct files
- Add 'help' command
- Add 'init' command
- More hooks for preload modules
- Several bug fixes
- Make it so that preload+fork does not add a stack layer
- unify to only one 'yath' script
- Split persist into multiple commands
- Create a plugin system, Add TCM plugin to split out later
- Remove pre-import option
- Better default log location+name
- Move CommandShared/Harness -> App/Command.pm
- Add --no-long option
- Add --exclude option
- Bind lib & blib earlier, use absolute paths
- Fix parser error on '}'
- Allow -w in tests after preload
- Handle timers better
0.001007 2017-09-11 21:40:28-07:00 America/Los_Angeles
- Properly pass args given via '::'
- Honor NO-STREAM header
- Persist now reloads when a file is changed
0.001006 2017-09-06 14:24:18-07:00 America/Los_Angeles (TRIAL RELEASE)
- Fix replay
- Add pre-import
- Add load and load-import options
- Add persistent harness
0.001005 2017-09-05 21:59:21-07:00 America/Los_Angeles (TRIAL RELEASE)
- Fix some bugs
- Remove accidentally added file
- Do not hang when waiting after control+c
- Restructure Run/Runner to be more sane
- Fix bugs, break out test file and queue
- Add extra space in help dialog
- Restructure common command options
- Better queue handling
- Put test and replay common logic in one place
- Fix bugs in replay
- Put common logic for test and replay commands in a single place.
0.001004 2017-08-31 21:02:34-07:00 America/Los_Angeles
- Make test.pl ok with preload
- Fix Formatter::Test2 for non-tty output
- Add -T for timing data per-test
- Better signal handling
- More HARNESS- header options:
- HARNESS-NO-TIMEOUT
- Delete job dirs when they are done unless -k is used
0.001003 2017-08-30 23:18:54-07:00 America/Los_Angeles (TRIAL RELEASE)
- Set env vars in the run-runner for preload
- Improve preload support
- Fix formatter selection in Open3 runner
- Update deps
0.001002 2017-08-29 21:10:17-07:00 America/Los_Angeles
- Allow preload of Test::Builder
0.001001 2017-08-28 22:40:20-07:00 America/Los_Angeles (TRIAL RELEASE)
- Complete rewrite
0.000013 2017-01-03 21:18:19-08:00 America/Los_Angeles
- Add event timeout option
- Fix filename rendering when a test is done
- Fixed handling of a "plan skip_all" issued in the main test (as opposed
to a subtest). Partially fixes GitHub
#21, reported by rjbs.
- When a test file doesn't run any tests but exits successfully, this was
treated as a pass. This is now detected and generates different output
indicating that the process did not run any tests. Fixes the rest of
GitHub #21, reported by rjbs.
0.000012 2016-12-19 11:46:41-08:00 America/Los_Angeles (TRIAL RELEASE)
- Fixed #9, environment now set properly in preload mode
- Job listeners now receive the Test2::Harness::Job object as the first
argument, rather than just the job id.
- Fixed the TAP parser to handle comments with leading
whitespace. Previously it would strip all the leading whitespace out,
causing both "# foo" and "# foo" to be output the same way.
- Add example for using the harness as a preload test file
- Document using Test2::Harness as a preload test runner
- Rewrote all of the internals so that the harness now handles Test2
events directly, rather than converting them into Test2::Harness::Fact
objects. The facts were losing some details of the events, and the event
system already exists and is usable with the harness simply by adding
some new harness-specific events. Implemented by Dave Rolsky. GitHub
#20.
0.000011 2016-06-10 14:11:01-07:00 America/Los_Angeles
- Fix rendering todo subtests...
0.000010 2016-06-10 13:39:27-07:00 America/Los_Angeles
- More complete todo subtest fix
0.000009 2016-06-10 13:02:11-07:00 America/Los_Angeles
- Fix TAP parsing bug when buffered subtests are TODO
0.000008 2016-05-31 07:35:46-07:00 America/Los_Angeles
- Lower the IO::Handle version req
0.000007 2016-05-28 16:31:35-07:00 America/Los_Angeles
- Try to fix JSON encoding problem
0.000006 2016-05-26 20:28:27-07:00 America/Los_Angeles (TRIAL RELEASE)
- Fix Data::Dumper typo >:-|
0.000005 2016-05-26 08:48:12-07:00 America/Los_Angeles (TRIAL RELEASE)
- Add missing JSON prototype in Fact.pm
- Add diagnostics when fact->to_json fails
0.000004 2016-05-26 08:35:04-07:00 America/Los_Angeles
- Handle -I better in the runner
- Make IO::Pty tests AUTHOR_TESTING only.
- Add IO::Pty to diagnostics output
- Diagnostics to show which JSON gets used
0.000003 2016-05-25 11:55:51-07:00 America/Los_Angeles
- Get path separator from config
- Better windows prereq specification
- Handle buffered usbtest race condition
0.000002 2016-05-25 09:22:22-07:00 America/Los_Angeles
- Die if given unknown command line flags. Patch by Dave Rolsky. GitHub
#1.
- Added -l (--lib) and -b (--blib) flags that work just like prove. Patch
by Dave Rolsky. GitHub #2.
- Better prereq list
- Diagnostic test output
- Old version and cross platform support
0.000001 2016-05-24 17:04:13-07:00 America/Los_Angeles
- Initial Release