Git::Hooks::CheckCommit - Git::Hooks plugin to enforce commit policies
version 3.3.1
As a Git::Hooks plugin you don't use this Perl module directly. Instead, you may configure it in a Git configuration file like this:
Git::Hooks
[githooks] # Enable the plugin plugin = CheckCommit # These users are exempt from all checks admin = joe molly # The @mergers group is used below groups = mergers = larry sally [githooks "checkcommit"] # Reject commits if the author or committer name contains any characters # other then lowercase letters. name = !^[a-z]+$ # Reject commits if the author or committer email does not belong to the # @cpqd.com.br domain. email = @cpqd\.com\.br$ # Enable several integrity checks on the author and committer emails using # the Email::Valid Perl module. email-valid = true # Only users in the @mergers group can push merge commits. merger = @mergers # Rejects pushes with more than two commits in a single branch, in order to # avoid careless pushes. push-limit = 2 # Reject commits unless they are signed with a GPG key # and the signature is good (does not need to be trusted). signature = good
This Git::Hooks plugin hooks itself to the hooks below to enforce commit policies.
pre-commit, pre-applypatch
This hook is invoked before a commit is made to check the author and committer identities.
post-commit, post-applypatch
This hook is invoked after a commit is made to check its signature. Note that the commit is checked after it has been made and any errors must be fixed with a git-commit --amend command afterwards.
git-commit --amend
update
This hook is invoked multiple times in the remote repository during git push, once per branch being updated, to check if all commits being pushed comply.
git push
pre-receive
This hook is invoked once in the remote repository during git push, to check if all commits being pushed comply.
ref-update
This hook is invoked when a direct push request is received by Gerrit Code Review, to check if all commits being pushed comply.
commit-received
This hook is invoked when a push request is received by Gerrit Code Review to create a change for review, to check if all commits being pushed comply.
submit
This hook is invoked when a change is submitted in Gerrit Code Review, to check if all commits being pushed comply.
patchset-created
This hook is invoked when a push request is received by Gerrit Code Review for a virtual branch (refs/for/*), to check if all commits being pushed comply.
Projects using Git, probably more than projects using any other version control system, have a tradition of establishing policies on several aspects of commits, such as those relating to author and committer identities and commit signatures.
To enable this plugin you should add it to the githooks.plugin configuration option:
[githooks] plugin = CheckCommit
The plugin is configured by the following git options under the githooks.checkcommit subsection.
githooks.checkcommit
It can be disabled for specific references via the githooks.ref and githooks.noref options about which you can read in the Git::Hooks documentation.
githooks.ref
githooks.noref
This multi-valued option impose restrictions on the valid author and committer names using regular expressions.
The names must match at least one of the "positive" regular expressions (the ones not prefixed by "!") and they must not match any one of the negative regular expressions (the ones prefixed by "!").
This check is performed by the pre-commit local hook.
pre-commit
This allows you, for example, to require that author and committer names have at least a first and a last name, separated by spaces:
[githooks "checklog"] name = .\\s+.
This multi-valued option impose restrictions on the valid author and committer emails using regular expressions.
The emails must match at least one of the "positive" regular expressions (the ones not prefixed by "!") and they must not match any one of the negative regular expressions (the ones prefixed by "!").
This option uses the Email::Valid module' address method to validate author and committer email addresses.
address
These checks are performed by the pre-commit local hook.
Note that the Email::Valid module isn't required to install Git::Hooks. If it's not found or if there's an error in the construction of the Email::Valid object the check fails with a suitable message.
Email::Valid
The Email::Valid constructor (new) accepts some parameters. You can pass the Boolean parameters to change their default values by means of the following sub-options. For more information, please consult the Email::Valid documentation.
Specifies whether addresses should be checked for a valid DNS entry. The default is false.
Specifies whether addresses should be checked for valid top level domains. The default is false.
Species whether addresses must contain a fully qualified domain name (FQDN). The default is true.
Specifies whether a "domain literal" is acceptable as the domain part. That means addresses like: rjbs@[1.2.3.4]. The default is true.
rjbs@[1.2.3.4]
This option requires the use of canonical names and emails for authors and committers, as configured in a MAILMAP file and checked by the git-check-mailmap command. Please, read that command's documentation to know how to configure a mailmap file for name and email canonicalization.
git-check-mailmap
This check is only able to detect known non-canonical names and emails that are converted to their canonical forms by the git-check-mailmap command. This means that if an unknown email is used it won't be considered an error.
Note that the git-check-mailmap command is available since Git 1.8.4. Older versions of Git don't have it and Git::Hooks will complain accordingly.
Note that you should not have Git configured to use a default mailmap file, either by placing one named .mailmap at the top level of the repository or by setting the configuration options mailmap.file and mailmap.blob. That's because if Git is configured to use a mailmap it will convert non-canonical to canonical names and emails before passing them to the hooks. This will invoke git-check-mailmap using the -c option to temporarily configure it to use the MAILMAP file.
mailmap.file
mailmap.blob
-c
This option allows one to check commit signatures according to these values:
nocheck
By default, or if this value is specified, no check is performed. This value is useful to disable checks in a repository when they are enabled globally.
optional
This value does not require commits to be signed but if they are their signatures must be valid (i.e. good or untrusted, but not bad).
good
This value requires that all commits be signed with good signatures.
trusted
This value requires that all commits be signed with good and trusted signatures.
This check is performed by the post-commit local hook.
post-commit
This multi-valued option restricts who can push commit merges to the repository. WHO may be specified as a username, a groupname, or a regex, like the githooks.admin option (see "CONFIGURATION" in Git::Hooks) so that only users matching WHO may push merge commits.
githooks.admin
This limits the number of commits that may be pushed at once on top of any reference. Set it to 1 to force developers to squash their commits before pushing them. Or set it to a low number (such as 3) to deny long chains of commits to be pushed, which are usually made by Git newbies who don't know yet how to amend commits. ;-)
If the above checks aren't enough you can use this option to define a custom code to check your commits. The code may be specified directly as the option's value or you may specify it indirectly via the filename of a script. If the option's value starts with "file:", the remaining is treated as the script filename, which is executed by a do command. Otherwise, the option's value is executed directly by an eval. Either way, the code must end with the definition of a routine, which will be called once for each commit with the following arguments:
Since the codes may take much time to run, the plugin checks if the githooks.timeout option has been violated after each code runs.
githooks.timeout
GIT
The Git repository object used to grok information about the commit.
COMMIT
This is a hash representing a commit, as returned by the Git::Repository::Plugin::GitHooks::get_commits method.
REF
The name of the reference being changed, for the update and the pre-receive hooks. For the pre-commit hook this argument is undef.
The subroutine should return a Boolean value indicating success. Any errors should be produced by invoking the Git::Repository::Plugin::GitHooks::error method.
If the subroutine returns undef it's considered to have succeeded.
If it raises an exception (e.g., by invoking die) it's considered to have failed and a proper message is produced to the user.
Module used to check validity of email addresses.
A Git Horror Story: Repository Integrity With Signed Commits
Gustavo L. de M. Chaves <gnustavo@cpan.org>
This software is copyright (c) 2022 by CPQD <www.cpqd.com.br>.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.
To install Git::Hooks, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Git::Hooks
CPAN shell
perl -MCPAN -e shell install Git::Hooks
For more information on module installation, please visit the detailed CPAN module installation guide.