NAME

Tinkerforge::BrickletCO2 - Measures CO2 concentration in ppm

CONSTANTS

DEVICE_IDENTIFIER

This constant is used to identify a CO2 Bricklet.

The get_identity() subroutine and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

DEVICE_DISPLAY_NAME

This constant represents the display name of a CO2 Bricklet.

CALLBACK_CO2_CONCENTRATION

This constant is used with the register_callback() subroutine to specify the CALLBACK_CO2_CONCENTRATION callback.

CALLBACK_CO2_CONCENTRATION_REACHED

This constant is used with the register_callback() subroutine to specify the CALLBACK_CO2_CONCENTRATION_REACHED callback.

FUNCTION_GET_CO2_CONCENTRATION

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_CO2_CONCENTRATION_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_CO2_CONCENTRATION_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_CO2_CONCENTRATION_CALLBACK_THRESHOLD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_CO2_CONCENTRATION_CALLBACK_THRESHOLD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_DEBOUNCE_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_DEBOUNCE_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_IDENTITY

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTIONS

new()

Creates an object with the unique device ID *uid* and adds it to the IP Connection *ipcon*.

get_co2_concentration()

Returns the measured CO2 concentration.

If you want to get the CO2 concentration periodically, it is recommended to use the :cb:`CO2 Concentration` callback and set the period with :func:`Set CO2 Concentration Callback Period`.

set_co2_concentration_callback_period()

Sets the period with which the :cb:`CO2 Concentration` callback is triggered periodically. A value of 0 turns the callback off.

The :cb:`CO2 Concentration` callback is only triggered if the CO2 concentration has changed since the last triggering.

get_co2_concentration_callback_period()

Returns the period as set by :func:`Set CO2 Concentration Callback Period`.

set_co2_concentration_callback_threshold()

Sets the thresholds for the :cb:`CO2 Concentration Reached` callback.

The following options are possible:

.. csv-table:: :header: "Option", "Description" :widths: 10, 100

 "'x'",    "Callback is turned off"
 "'o'",    "Callback is triggered when the CO2 concentration is *outside* the min and max values"
 "'i'",    "Callback is triggered when the CO2 concentration is *inside* the min and max values"
 "'<'",    "Callback is triggered when the CO2 concentration is smaller than the min value (max is ignored)"
 "'>'",    "Callback is triggered when the CO2 concentration is greater than the min value (max is ignored)"

get_co2_concentration_callback_threshold()

Returns the threshold as set by :func:`Set CO2 Concentration Callback Threshold`.

set_debounce_period()

Sets the period with which the threshold callbacks

* :cb:`CO2 Concentration Reached`,

are triggered, if the thresholds

* :func:`Set CO2 Concentration Callback Threshold`,

keep being reached.

get_debounce_period()

Returns the debounce period as set by :func:`Set Debounce Period`.

get_identity()

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an :ref:`Isolator Bricklet <isolator_bricklet>` is always at position 'z'.

The device identifier numbers can be found :ref:`here <device_identifier>`. |device_identifier_constant|