perl595delta - what is new for perl v5.9.5
This document describes differences between the 5.9.4 and the 5.9.5 development releases. See perl590delta, perl591delta, perl592delta, perl593delta and perl594delta for the differences between 5.8.0 and 5.9.4.
When perl is run under taint mode, printf() and sprintf() will now reject any tainted format argument. (Rafael Garcia-Suarez)
printf()
sprintf()
Undefining or deleting a signal handler via undef $SIG{FOO} is now equivalent to setting it to 'DEFAULT'. (Rafael)
undef $SIG{FOO}
'DEFAULT'
defined @$foo and defined %$bar are now subject to strict 'refs' (that is, $foo and $bar shall be proper references there.) (Nicholas Clark)
defined @$foo
defined %$bar
strict 'refs'
$foo
$bar
(However, defined(@foo) and defined(%bar) are discouraged constructs anyway.)
defined(@foo)
defined(%bar)
(?p{})
The regular expression construct (?p{}), which was deprecated in perl 5.8, has been removed. Use (??{}) instead. (Rafael)
(??{})
Support for pseudo-hashes has been removed from Perl 5.9. (The fields pragma remains here, but uses an alternate implementation.)
fields
perlcc, the byteloader and the supporting modules (B::C, B::CC, B::Bytecode, etc.) are no longer distributed with the perl sources. Those experimental tools have never worked reliably, and, due to the lack of volunteers to keep them in line with the perl interpreter developments, it was decided to remove them instead of shipping a broken version of those. The last version of those modules can be found with perl 5.9.4.
perlcc
However the B compiler framework stays supported in the perl core, as with the more useful modules it has permitted (among others, B::Deparse and B::Concise).
The JPL (Java-Perl Linguo) has been removed from the perl sources tarball.
Perl will now immediately throw an exception if you modify any package's @ISA in such a way that it would cause recursive inheritance.
@ISA
Previously, the exception would not occur until Perl attempted to make use of the recursive inheritance while resolving a method or doing a $foo->isa($bar) lookup.
$foo->isa($bar)
It is now possible to write recursive patterns without using the (??{}) construct. This new way is more efficient, and in many cases easier to read.
Each capturing parenthesis can now be treated as an independent pattern that can be entered by using the (?PARNO) syntax (PARNO standing for "parenthesis number"). For example, the following pattern will match nested balanced angle brackets:
(?PARNO)
PARNO
/ ^ # start of line ( # start capture buffer 1 < # match an opening angle bracket (?: # match one of: (?> # don't backtrack over the inside of this group [^<>]+ # one or more non angle brackets ) # end non backtracking group | # ... or ... (?1) # recurse to bracket 1 and try it again )* # 0 or more times. > # match a closing angle bracket ) # end capture buffer one $ # end of line /x
Note, users experienced with PCRE will find that the Perl implementation of this feature differs from the PCRE one in that it is possible to backtrack into a recursed pattern, whereas in PCRE the recursion is atomic or "possessive" in nature. (Yves Orton)
It is now possible to name capturing parenthesis in a pattern and refer to the captured contents by name. The naming syntax is (?<NAME>....). It's possible to backreference to a named buffer with the \k<NAME> syntax. In code, the new magical hashes %+ and %- can be used to access the contents of the capture buffers.
(?<NAME>....)
\k<NAME>
%+
%-
Thus, to replace all doubled chars, one could write
s/(?<letter>.)\k<letter>/$+{letter}/g
Only buffers with defined contents will be "visible" in the %+ hash, so it's possible to do something like
foreach my $name (keys %+) { print "content of buffer '$name' is $+{$name}\n"; }
The %- hash is a bit more complete, since it will contain array refs holding values from all capture buffers similarly named, if there should be many of them.
%+ and %- are implemented as tied hashes through the new module Tie::Hash::NamedCapture.
Tie::Hash::NamedCapture
Users exposed to the .NET regex engine will find that the perl implementation differs in that the numerical ordering of the buffers is sequential, and not "unnamed first, then named". Thus in the pattern
/(A)(?<B>B)(C)(?<D>D)/
$1 will be 'A', $2 will be 'B', $3 will be 'C' and $4 will be 'D' and not $1 is 'A', $2 is 'C' and $3 is 'B' and $4 is 'D' that a .NET programmer would expect. This is considered a feature. :-) (Yves Orton)
Perl now supports the "possessive quantifier" syntax of the "atomic match" pattern. Basically a possessive quantifier matches as much as it can and never gives any back. Thus it can be used to control backtracking. The syntax is similar to non-greedy matching, except instead of using a '?' as the modifier the '+' is used. Thus ?+, *+, ++, {min,max}+ are now legal quantifiers. (Yves Orton)
?+
*+
++
{min,max}+
The regex engine now supports a number of special-purpose backtrack control verbs: (*THEN), (*PRUNE), (*MARK), (*SKIP), (*COMMIT), (*FAIL) and (*ACCEPT). See perlre for their descriptions. (Yves Orton)
A new syntax \g{N} or \gN where "N" is a decimal integer allows a safer form of back-reference notation as well as allowing relative backreferences. This should make it easier to generate and embed patterns that contain backreferences. See "Capture buffers" in perlre. (Yves Orton)
\g{N}
\gN
\K
The functionality of Jeff Pinyan's module Regexp::Keep has been added to the core. You can now use in regular expressions the special escape \K as a way to do something like floating length positive lookbehind. It is also useful in substitutions like:
s/(foo)bar/$1/g
that can now be converted to
s/foo\Kbar//g
which is much more efficient. (Yves Orton)
Regular expressions now recognize the \v and \h escapes, that match vertical and horizontal whitespace, respectively. \V and \H logically match their complements.
\v
\h
\V
\H
\R matches a generic linebreak, that is, vertical whitespace, plus the multi-character sequence "\x0D\x0A".
\R
"\x0D\x0A"
_
A new prototype character has been added. _ is equivalent to $ (it denotes a scalar), but defaults to $_ if the corresponding argument isn't supplied. Due to the optional nature of the argument, you can only use it at the end of a prototype, or before a semicolon.
$
$_
This has a small incompatible consequence: the prototype() function has been adjusted to return _ for some built-ins in appropriate cases (for example, prototype('CORE::rmdir')). (Rafael)
prototype('CORE::rmdir')
UNITCHECK, a new special code block has been introduced, in addition to BEGIN, CHECK, INIT and END.
UNITCHECK
BEGIN
CHECK
INIT
END
CHECK and INIT blocks, while useful for some specialized purposes, are always executed at the transition between the compilation and the execution of the main program, and thus are useless whenever code is loaded at runtime. On the other hand, UNITCHECK blocks are executed just after the unit which defined them has been compiled. See perlmod for more information. (Alex Gough)
The built-in function readpipe() is now overridable. Overriding it permits also to override its operator counterpart, qx// (a.k.a. ``). Moreover, it now defaults to $_ if no argument is provided. (Rafael)
qx//
``
readline() now defaults to *ARGV if no argument is provided. (Rafael)
*ARGV
The copy of the Unicode Character Database included in Perl 5.9 has been updated to version 5.0.0.
The smart match operator (~~) is now available by default (you don't need to enable it with use feature any longer). (Michael G Schwern)
~~
use feature
feature
The feature pragma is now implicitly loaded when you require a minimal perl version (with the use VERSION construct) greater than, or equal to, 5.9.5.
use VERSION
mro
A new pragma, mro (for Method Resolution Order) has been added. It permits to switch, on a per-class basis, the algorithm that perl uses to find inherited methods in case of a multiple inheritance hierarchy. The default MRO hasn't changed (DFS, for Depth First Search). Another MRO is available: the C3 algorithm. See mro for more information. (Brandon Black)
Note that, due to changes in the implementation of class hierarchy search, code that used to undef the *ISA glob will most probably break. Anyway, undef'ing *ISA had the side-effect of removing the magic on the @ISA array and should not have been done in the first place.
*ISA
The three numeric pragmas bignum, bigint and bigrat are now lexically scoped. (Tels)
bignum
bigint
bigrat
Many bugs have been fixed; noteworthy are comparisons with NaN, which no longer warn about undef values.
The following things are new:
The config() method now also supports the calling-style config('lib') in addition to config()->{'lib'}.
config('lib')
config()->{'lib'}
Upon import, using lib => 'Foo' now warns if the low-level library cannot be found. To suppress the warning, you can use try => 'Foo' instead. To convert the warning into a die, use only => 'Foo' instead.
lib => 'Foo'
try => 'Foo'
only => 'Foo'
A rounding mode of common is now supported.
common
Also, support for the following methods has been added:
In addition, the default math-backend (Calc (Perl) and FastCalc (XS)) now support storing numbers in parts with 9 digits instead of 7 on Perls with either 64bit integer or long double support. This means math operations scale better and are thus faster for really big numbers.
Locale::Maketext::Simple, needed by CPANPLUS, is a simple wrapper around Locale::Maketext::Lexicon. Note that Locale::Maketext::Lexicon isn't included in the perl core; the behaviour of Locale::Maketext::Simple gracefully degrades when the later isn't present.
Locale::Maketext::Simple
Locale::Maketext::Lexicon
Params::Check implements a generic input parsing/checking mechanism. It is used by CPANPLUS.
Params::Check
Term::UI simplifies the task to ask questions at a terminal prompt.
Term::UI
Object::Accessor provides an interface to create per-object accessors.
Object::Accessor
Module::Pluggable is a simple framework to create modules that accept pluggable sub-modules.
Module::Pluggable
Module::Load::Conditional provides simple ways to query and possibly load installed modules.
Module::Load::Conditional
Time::Piece provides an object oriented interface to time functions, overriding the built-ins localtime() and gmtime().
Time::Piece
IPC::Cmd helps to find and run external commands, possibly interactively.
IPC::Cmd
File::Fetch provide a simple generic file fetching mechanism.
File::Fetch
Log::Message and Log::Message::Simple are used by the log facility of CPANPLUS.
Log::Message
Log::Message::Simple
CPANPLUS
Archive::Extract is a generic archive extraction mechanism for .tar (plain, gziped or bzipped) or .zip files.
Archive::Extract
CPANPLUS provides an API and a command-line tool to access the CPAN mirrors.
assertions
The assertions pragma, its submodules assertions::activate and assertions::compat and the -A command-line switch have been removed. The interface was not judged mature enough for inclusion in a stable release.
assertions::activate
assertions::compat
base
The base pragma now warns if a class tries to inherit from itself. (Curtis "Ovid" Poe)
strict
warnings
strict and warnings will now complain loudly if they are loaded via incorrect casing (as in use Strict;). (Johan Vromans)
use Strict;
The warnings pragma doesn't load Carp anymore. That means that code that used Carp routines without having loaded it at compile time might need to be adjusted; typically, the following (faulty) code won't work anymore, and will require parentheses to be added after the function name:
Carp
use warnings; require Carp; Carp::confess "argh";
less
less now does something useful (or at least it tries to). In fact, it has been turned into a lexical pragma. So, in your modules, you can now test whether your users have requested to use less CPU, or less memory, less magic, or maybe even less fat. See less for more. (Joshua ben Jore)
Attribute::Handlers
Attribute::Handlers can now report the caller's file and line number. (David Feldman)
B::Lint
B::Lint is now based on Module::Pluggable, and so can be extended with plugins. (Joshua ben Jore)
B
It's now possible to access the lexical pragma hints (%^H) by using the method B::COP::hints_hash(). It returns a B::RHE object, which in turn can be used to get a hash reference via the method B::RHE::HASH(). (Joshua ben Jore)
%^H
B::RHE
Thread
As the old 5005thread threading model has been removed, in favor of the ithreads scheme, the Thread module is now a compatibility wrapper, to be used in old code only. It has been removed from the default list of dynamic extensions.
cpanp
cpanp, the CPANPLUS shell, has been added. (cpanp-run-perl, an helper for CPANPLUS operation, has been added too, but isn't intended for direct use).
cpanp-run-perl
cpan2dist
cpan2dist is a new utility, that comes with CPANPLUS. It's a tool to create distributions (or packages) from CPAN modules.
pod2html
The output of pod2html has been enhanced to be more customizable via CSS. Some formatting problems were also corrected. (Jari Aalto)
A new manual page, perlunifaq (the Perl Unicode FAQ), has been added (Juerd Waalboer).
Efforts have been made to make perl and the core XS modules compilable with various C++ compilers (although the situation is not perfect with some of the compilers on some of the platforms tested.)
Perl now can be compiled with Microsoft Visual C++ 2005.
It's now possible to build a perl-static.exe that doesn't depend on perl59.dll on Win32. See the Win32 makefiles for details. (Vadim Konovalov)
perl-static.exe
perl59.dll
All win32 builds (MS-Win, WinCE) have been merged and cleaned up.
d_pseudofork
d_printf_format_null
A new configuration variable, available as $Config{d_pseudofork} in the Config module, has been added, to distinguish real fork() support from fake pseudofork used on Windows platforms.
$Config{d_pseudofork}
A new configuration variable, d_printf_format_null, has been added, to see if printf-like formats are allowed to be NULL.
Configure -h has been extended with the most used option.
Configure -h
Much less 'Whoa there' messages.
Better detection of 64bit(only) systems, and setting all the (library) paths accordingly.
Perl has been reported to work on MidnightBSD.
Support for Cray XT4 Catamount/Qk has been added.
Vendor patches have been merged for RedHat and GenToo.
PerlIO::scalar will now prevent writing to read-only scalars. Moreover, seek() is now supported with PerlIO::scalar-based filehandles, the underlying string being zero-filled as needed. (Rafael, Jarkko Hietaniemi)
study() never worked for UTF-8 strings, but could lead to false results. It's now a no-op on UTF-8 data. (Yves Orton)
The signals SIGILL, SIGBUS and SIGSEGV are now always delivered in an "unsafe" manner (contrary to other signals, that are deferred until the perl interpreter reaches a reasonably stable state; see "Deferred Signals (Safe Signals)" in perlipc). (Rafael)
When a module or a file is loaded through an @INC-hook, and when this hook has set a filename entry in %INC, __FILE__ is now set for this module accordingly to the contents of that %INC entry. (Rafael)
The -w and -t switches can now be used together without messing up what categories of warnings are activated or not. (Rafael)
-w
-t
Duping a filehandle which has the :utf8 PerlIO layer set will now properly carry that layer on the duped filehandle. (Rafael)
:utf8
Localizing an hash element whose key was given as a variable didn't work correctly if the variable was changed while the local() was in effect (as in local $h{$x}; ++$x). (Bo Lindbergh)
local $h{$x}; ++$x
Two deprecation warnings have been added: (Rafael)
Opening dirhandle %s also as a file Opening filehandle %s also as a directory
The anonymous hash and array constructors now take 1 op in the optree instead of 3, now that pp_anonhash and pp_anonlist return a reference to an hash/array when the op is flagged with OPf_SPECIAL (Nicholas Clark).
If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/rt3/ . There may also be information at http://www.perl.org/ , the Perl Home Page.
If you believe you have an unreported bug, please run the perlbug program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of perl -V, will be sent off to perlbug@perl.org to be analysed by the Perl porting team.
perl -V
The Changes file for exhaustive details on what changed.
The INSTALL file for how to build Perl.
The README file for general stuff.
The Artistic and Copying files for copyright information.
To install Env, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Env
CPAN shell
perl -MCPAN -e shell install Env
For more information on module installation, please visit the detailed CPAN module installation guide.