$Id: Changes.unstable,v 1.77 2006/08/05 23:04:46 joern Exp $
Revision history and release notes for dvd::rip.
0.97.13 [unstable branch] Sat Aug 5 2006, joern
Features:
- Updated French translation from Christophe Combelles.
- Updaged German translation.
- Initial preferences setup:
- Show additional message with some notes on intial setup
- Select first DVD device by default (if HAL is present)
- Default language setting is derived from user's locale
- Default dvd::rip data directores is set to $HOME/dvdrip-data
- Added a "Create directory" button besides the corresponding entries
- Rearanged pages, so most important settings are on the first page.
Bugfixes:
- dvd::rip missed creating the tmp/backup.rip file. Thanks
for the report to Ben Lancaster <lists AT benlancaster.co.uk>
- Chapter transcoding didn't work. Thanks for reporting this one
to Daniel <komet AT stolzesherz.de> and Robert Tell
<robert.tell AT gmx.net>
- Fix thumbnail generation with older ImageMagick. Thanks for
the patch to Kevin Pulo <kev AT pulo.com.au>.
- Grey out subtitle language selection box on the "Rip" page
for titles without subtitles.
- Test results in the Preferences dialog was not colored
correctly in non-englisch environments.
0.97.12 [unstable branch] Sat Jul 2 2006, joern
Notes:
- New (optional) dependency: dvd::rip now uses HAL for DVD
device scanning.
- Gtk2::Ex::FormFactory 0.65 is required, which fixes a
serious 0.64 bug.
Features:
- Dropped 'DVD image' ripping mode, but added a more generic
approach of DVD input selection as a replacement. This
way you can 'rip' from a DVD image e.g. to fulfill cluster
mode requirements without hacking the DVD device preference
anymore. Suggested by Stefan Ollermann <Stefan.Ollermann AT gmx.de>.
- Added DVD device scanning using HAL. This is optional, you
can always select the DVD device file directly.
- French splash screen and generally updated splash screen
design by Christophe Combelles.
- Updated italian translation by Fabio Russo.
- Message finetuning, added more tooltips, updated German
translation.
Bugfixes:
- Removed all preference settings and dependencies for
CD burning, since this module doesn't exist anymore.
- Fixed minor free diskspace calculation bugs.
0.97.11 [unstable branch] Sat Jun 17 2006, joern
Dependency notes:
- libintl-perl resp. Locale::TextDomain 1.16 is required
- Gtk2::Ex::FormFactory 0.64 is required
- Event::ExecFlow 0.62 is required
Features:
- Filters & Preview finally ported to 0.97.x Gtk2 branch.
Please note that transcode 1.0.2 has a bug which breaks
most filters in the preview window :(
This tar.gz ships a patch which fixes this issue:
patches/transcode-1.0.x-filter-patch.txt
- Removed utf-8 l10n workaround which isn't necessary with
libintl-perl 1.16 anymore.
- Added new preference setting for default subtitle grabbing
mode. Feature request by Christian Marillat.
- Added a hint to the subtitle grabbing radio boxes tooltips
that subtitle grabbing may slowdown ripping process.
- Added support for transcode 1.1.x development branch, but
this is highly experimental.
- Updated German translation and optimized some messages
for GUI space. Now the German GUI isn't much wider than
the English.
Bugfixes:
- Job execution: some errors could left the GUI in an
unusable state.
- Applied a patch from Eric Festinger <eric.festinger AT
gmail.com> which makes changing color index B work again.
- NPTL workaround option is disabled, if workaround is not
possible for the running architecture (e.g. amd64).
- Filter color mode check now ignores pure audio filters.
- Message dialogs are not attached to the main GUI window
anymore, which was confusing for dialogs opened from
child windows.
- Added a workaround for a strange Data::Dumper bug on
some platforms (fixes 29,576 <-> 29.576 frame rate issue).
0.97.10 [unstable branch] Mon Apr 24 2006, joern
Features:
- Updated spanish translation (and a spanish splash screen ;).
Thanks to Sergio Cambra.
Bugfixes:
- Preview grabbing didn't work due to a broken (and untested,
my bad) fix in 0.97.9.
0.97.9 [unstable branch] Sun Apr 23 2006, joern
Note:
- Gtk2::Ex::FormFactory 0.63 is required for this release.
It fixes a bug with with dvd::rip's Preference dialog.
Thanks for the report to Niki Kovacs <contact AT kikinovak.net>.
Bugfixes:
- Volume scanning didn't work anymore, thanks for the report
to Alexander Skwar.
- dvdrip-master didn't start, still used a factored out
module. Thanks for report & fix to Andreas Vinsander
<andreas AT vinsander.se>
- Under some circumstances preview grabbing didn't work due
to missing default values for width/height settings.
Thanks for the report to Christian Marillat.
0.97.8 [unstable branch] Mon Apr 10 2006, joern
Note:
- Gtk2::Ex::FormFactory 0.62 is required for this release.
It fixes a nasty bug with recent libgtk2 versions.
Thanks for debugging assistance to Alex Petkov
<alexandphyllis AT excite.com>.
Features:
- Support AC3 passthrough for on-the-fly and dvd image
encoding as well, by doing an extra audio bitrate probe
once AC3 codec is selected on the Transcode tab.
Bugfixes:
- Fixed a divison-by-zero condition in bitrate calculation
module, thanks for the pointer to Dhek Bhun Kho <bhun.kho
AT gmail.com>.
- Subtitle preview didn't work in 0.97.7 due to a missing
module. Thanks for the report to Rafael Kolless <rafael AT
mondoria.de>.
0.97.7 [unstable branch] Sun Apr 2 2006, joern
Notes:
- dvd::rip now depends on a new Perl module: Event::ExecFlow
version 0.61. You can get it from CPAN or better from the
exit1.org homepage: http://www.exit1.org/Event-ExecFlow/
- Event::ExecFlow itself needs the AnyEvent module, which is
available from CPAN:
http://search.cpan.org/~mlehmann/AnyEvent-1.02/
- Gtk2::Ex::FormFactory needs to be at least version 0.61
- Event::RPC needs to be at least version 0.89
Features:
- Refactored out the internal command execution engine to
Event::ExecFlow introducing some interesting new features.
- New graphical progress window showing all
jobs of the current task in a nice hierarchical
treeview. Just hit on the magnifying glass symbol
besides the progress bar
- Pausing/resuming the running job by one click
- Extensive rewrite of the cluster mode using the new
execution engine and progress widget which visualizes
the tree structure of cluster jobs much butter than the
old cluster job display.
- More cluster features are:
- Allow cluster encoding without audio
- You can specify a speed index for each cluster node.
- Faster machines will be preferred.
- vobsub file generation added
- dvdrip-master now does a clean shutdown on signals.
- Cluster window now has it's own menu bar with menu items
- Connect/Disconnect the cluster master daemon from here.
- Dropped "DVD mount dir" preference, because dvd::rip now
determines the mount point of your DVD device automatically.
Thanks for the suggestion to Dario Castellarin <dacstp AT
tiscali.it>.
- Generating preview images doesn't block the GUI anymore.
- Improved Clip & Zoom clipping windows: added text entries
for clipping values and meaningful warnings when values
aren't even or not divisible by 16, which is required
for transcodes internal processing and/or most video codecs.
- Make "ffmpeg/af6 codec" field a combo box with presets
for ffmpeg "mpeg4" and "h264" codecs.
- A new nicer splash image including a Gnome compliant
About dialog, with credits for the translators.
- Updated Italian translation, thanks to Fabio Russo.
- Updated German translation.
- Added icons to the project's notebook tabs
Bugfixes:
- Preview frame grabbing failed for multi-PSU titles when
the frame number goes beyond the first PSU. This fix
should make the "use slow grabbing" checkbox mostly
useless. It's still there but will likely be dropped in
future versions.
- TOC reading with lsdvd and DVD-image mode still accessed
the physical DVD device instead of the DVD-image directory.
Thanks for their reports to Triffid hunter and
<mykhal AT centrum.cz>.
- Disable multipass transcoding for ffmpeg/h264, since
transcode currently doesn't support this.
- lsdvd was used even if it was too old. Thanks for the report
to Garnet Ulrich <garnet.ulrich AT gmx.net> and
Sören Brunk <soerenbrunk AT gmx.de>.
- Preferences: base project dir need to be absolute, which is
checked now in the dialog.
- Preferences: changed default video codec from 'divx4'
to 'xvid4' (this was overdue... ;)
- Consistent button behaviour: all buttons triggering
actions now grey out if a task is active.
- Some smaller bugfixes in the cluster mode GUI, inconsistencies
between GUI and the master's state.
- Clip & Zoom image windows: recalculate images only if the
user changed something.
- Subtitles: "Create VOBSUB now" just works on the currently
selected subtitle. No need to mark it for vobsub creation
anymore.
- Fixed wrong frame counting during ripping, which resulted in
too big frame numbers and thus incorrect bitrate calculation.
Thanks to Christian Marillat for reporting this one.
- Audio channel numbers on the GUI now start at 1, not at 0,
which is more convenient.
- Fixed regression: don't ask for project file save on exit
if just the selected notebook page changed.
- And a lot of more smaller bugs not counted here...
0.97.6 [unstable branch] Tue Jan 3 2005, joern
Bugfixes:
- Fixed off by one bugs in viewing angle and chapter
selection. Thanks for the report to Chandler Carruth
<chandlerc AT gmail.com>.
- Deactivate multipass GUI elements for MPEG encodings.
- Fixed cluster mode 'dvdrip-exec' bug introduced in 0.97.5.
Thanks for the report to Karl Kashofer <karl AT kashofer.org>.
0.97.5 [unstable branch] Wed Dec 28 2005, joern
Notes:
- This version requires Gtk2::Ex::FormFactory 0.59.
Features:
- Set default lame/MP3 quality level to 2 instead of 0,
which is very slow but without an appropriate quality
gain. Thanks for the hint to Fridtjof Busse.
Bugfixes:
- When ripping a title again the Clip & Zoom was reset
to 'auto_medium_fast' even if it was changed in the
meantime.
- When ripping multiple titles preview images were generated
only for the first selected title. Thanks for the report
to Fridtjof Busse.
- MANIFEST lacked files for dvdrip-tet. Thanks for the
report to Jacob Joseph <jmjoseph AT andrew.cmu.edu>.
- dvdrip-tet: fixed a typo in "exit afterwards" function.
Thanks for the report to Fridtjof Busse (again ;)
- Store LD_ASSUME_KERNEL in tool_version_cache file and
discard cache if LD_ASSUME_KERNEL changed in the meantime;
fixes nptl_workaround deadlock problem on Gentoo. Thanks
to Triffid Hunter for the detailed report.
- Workaround Locale::TextDomain utf-8 bug, which destroyed
8 bit characters in the GUI if an utf-8 locale was in effect.
- Since 0.97.4 all subprocesses were executed with nice
level 19, the GUI setting was ignored. Thanks for the report
to Alex <gaaf AT gmx.net>,
0.97.4 [unstable branch] Sun Oct 30 2005, joern
Bugfixes:
- Various critical cluster mode fixes (in particular some
endless loop conditions)
- Subtitle preview didn't work due to conflicts with
latest internal API changes.
- dvd::rip rejected negative vertical subtitle offsets,
which are absolutely valid. Thanks for the report to
elerran <elerran AT freemail.gr>.
- Fixed bug with wrong audio track assignment with
old tcprobe based TOC reading (new lsdvd mode was not
affected). Thanks for the report to Markus Frisch
<markus AT frisch.com>
- Volume scanning progress bar didn't work; scanned value
didn't appear in GUI. Thanks for the report to
Triffid Hunter.
- dvdrip-tet crashed if a confirmation request should
pop up. For know dvdrip-tet just assumes "Yes" to
the question and continues.
0.97.3 [unstable branch] Sun Oct 9 2005, joern
Notes:
- This version requires Gtk2::Ex::FormFactory 0.58.
- New optional dependency: with lsdvd dvd::rip reads
DVD TOC much faster.
- Source directory layout changed slightly. All scripts
and binaries moved into the bin/ subdirectory. All
additional program files now have a "dvdrip-" prefix,
the old "dr_" prefix for some binaries was dropped.
Features:
- Subtitle preview images may be grabbed while ripping
which makes finding the correct subtitles much easier
since no long-winded preview grabbing has to be done
later. You can chosse to rip no subs, all of them or
by language. Aware: your CPU will glow a bit more while
ripping if you use this feature ;)
- dvd::rip now has a command line frontend for pure
transcoding without any GUI: dvdrip-tet (task execution
terminal). Just execute "dvdrip-tet" to get some help
about the the command line options.
- With dvdrip-replex an experimental command line
application is shipped which does DVD shrinking based
on a ripped DVD and the corresponding dvd::rip project
file. Just a prove-of-concept. The functionality will
be added to the GUI sometimes...
- Added a simple 'configure' script to fulfill GNU Source
Installer requirements. Thanks for the suggestion to
Claudio Fontana <sick_soul AT yahoo.it>.
- Ported "force slow frame grabbing" feature from 0.52 to
0.97 branch.
- Preferences dialog now has a "Cancel" button.
- Added an "dvd::rip" entry to the dependency table which
checks whether all dvd::rip command files are found
in the PATH.
Bugfixes:
- Cluster control web service was broken.
- Applied a patch from Ulrich Spoerlein <q AT galgenberg.net>
removing the -ping option from the ImageMagick "identify"
calls, since recent ImageMagick versions don't have this
option anymore.
- Applied minor patches from Ulrich Spoerlein to improve
FreeBSD compatability.
- Parsing output of the ImageMagick identify command was
broken with specific filenames. Thanks for the report
to Colin Wheat <cwheat AT ami.com.au>.
- Dropped "identify -ping" option, since not any longer
supported with newer versions. Thanks for the report
to Avinash Chopde <avinash AT acm.org>.
- X(S)VCD processing with manual bitrate setting didn't
work. Thanks for the report to Ed Doolittle <ed.doolittle
AT utoronto.ca>
- dvd::rip dependency check was broken if tools didn't run
due to NPTL issues. Switching NPTL workaround on/off
didn't help anymore because the results were cached even
on that case. Thanks for figuring that out to
Joe Zbiciak <intvnut AT gmail.com>.
- Sightly cluster mode node editor GUI improvements
0.97.2 [unstable branch] Mon Aug 1 2005, joern
Notes:
- You need at least Gtk2::Ex::FormFactory 0.57. Download from
here because it may not reached all CPAN sites yet:
http://www.exit1.org/Gtk2-Ex-FormFactory/
Features:
- Ported cluster mode GUI to Gtk2, including a slightly internal
code redesign of dvdrip-master, which introduces another Perl
module dependency: Event::RPC 0.84. Download the module from
CPAN or from the project's homepage:
http://www.cpan.org/modules/by-module/Event/
http://www.exit1.org/Event-RPC
I think I fixed a bunch of smaller bugs in the cluster
mode during the code review and redesign as well... ;)
- New button "Create project" on Storage page. So we have
a definitive point when the project was created, after
that the name may not change again and the data directory
structure, logfile etc. is created.
Bugfixes:
- Preferences: changing DVD mount point and setting a directory
as the DVD device didn't work. Thanks for the report to
Christian Marillat.
- When creating a new project: changing the project name
was impossible once the name matched an existing project
name in the dvd::rip data directory.
- Delete volume rescale when a audio filter is set.
- Fixed wrong viewing angle mplayer DVD command preset.
Thanks for the report to Brian J. Murrell <brian AT
interlinx.bc.ca>
- Missed log file creation for new projects.
- Subtitle preview window was broken
- Bitrate calculation stuff wasn't initialized correctly
if a default BBP was set in the Preferences
0.97.1 [unstable branch] Sat Jul 23 2005, joern
Features:
- Extensive GUI redesign. dvd::rip now uses Gtk2 and
Gtk2::Ex::FormFactory, so we have new dependencies
here.
The Perl Gtk2 binding should be part of every modern
Linux distribution, e.g. Debian has a libgtk2-perl package.
Otherwise grab it from CPAN (see URL below). I personally
use version 1.082, but lower versions may work as well.
Gtk2::Ex::FormFactory is rather new and not yet packaged
for any Linux distro, at least I'm not aware of. Installation
is straight forward (perl Makefile.PL && make test && make install).
Version 0.56 is required.
You can grab both Gtk2 and Gtk2::Ex::FormFactory from here:
http://www.cpan.org/modules/by-module/Gtk2/
- A bunch of smaller features / changes, in particular making
the GUI more comfortable. Too many to list them all, just
poke around to find them ;)
Notes:
- This is an ALPHA release, so please use with care, but *please*
use it and report any bugs to the dvdrip-users list.
- The project file format didn't change significantly. Files
from older dvd::rip versions will just work. Even opening
files created with 0.97.1 should work in older versions.
As usual you should make backups nevertheless.
- The redesign is not yet fully completed. The cluster,
transcode filter & preview and burning stuff is currently missing.
Cluster stuff will be added soon, filter stuff a bit later
and burning stuff probably never: depends on user feedback ;)
- Only the German translation is complete, other languages
will follow.
- The online web documentation still covers the old Gtk1
based version. This will change with the 0.98 stable release
based on this 0.97 branch. Since the main functionality didn't
change much this should be no problem at all.
0.52.7 [stable branch] Sat Mar 18 2006, joern
Bugfixes:
- Added a workaround for strange transcode bug with VOB
directory input
- Backported NPTL-Workaround-Tool-Version-Caching bugfix
into stable branch.
- NPTL Workaround now disabled by default, because it's
in general not necessary anymore with newer transcode
releases and makes problems on some platforms.
- VCD bitrate calculation wasn't accurate, multiplex
reserve wasn't considered.
- Adjusted transcode frame count regex to cover new output
format of transcode 1.1.x as well.
- Applied a patch from Ulrich Spoerlein <q AT galgenberg.net>
removing the -ping option from the ImageMagick "identify"
calls, since recent ImageMagick versions don't have this
option anymore.
- Applied minor patches from Ulrich Spoerlein to improve
FreeBSD compatability.
0.52.6 [stable branch] Sat Jul 23 2005, joern
Notes:
- Using transcode newer than version 0.6.14 is *not*
recommended. At least subtitling is broken for
these versions, and it seems there are still
several NPTL related issues making problems.
Features:
- Added LD_ASSUME_KERNEL version number entry to the
Preferences dialog extending the NPTL workaround
feature introduced in 0.52.4. Initially set to
version 2.4.30, since this number seems to be more
appropriate, while the prior 2.2.5 made problems
at least on Gentoo. Thanks for figuring that out to
<robert AT firehead.org>.
- Added a "Force slow grabbing" checkbox to the Clip&Zoom
page to workaround fast nav seeking problems with
some DVD's. Suggested by Ivan Villanueva.
- Updated italian translation by Fabio Russo.
Bugfixes:
- Cluster mode: client/server communication didn't work
if the corresponding machines had different endianess
(e.g. i686 vs. amd64). Thanks for the report to
Benjamin Van Laere <B.VanLaere AT unpeu.com>.
- Cluster mode: ogg/vorbis projects didn't work since
0.52.5. Thanks for the reports to Sören Brunk
<soerenbrunk AT gmx.de>, Alexander Skwar <listen AT
alexander.skwar.name> and Knic Knic <oneeyedelf1 AT
hotmail.com>.
- Deferred vobsub creation didn't work if dvd::rip was
configured to exit after transcoding. Thanks to
Ivan Villanueva <dvdrip AT artificialidea.com> for
the report.
0.52.5 [stable branch] Mon May 16 2005, joern
Features:
- Updated italian translation from Fabio Russo, which was
*one* minute too late for the 0.52.4 release ;)
Bugfixes:
- Cluster mode: merging PSU chunks for a OGG/Vorbis title
failed due to a dumb typo.
0.52.4 [stable branch] Mon May 16 2005, joern
Features:
- Full featured support for BPP (bits per pixel) resp.
quality based video bitrate calculation (based on a
request by Daniel Faber <mail AT daniel-faber.de>):
- Permanent display of the bpp value on the transcode
tab in a combo box
- BPP value may be edited, video bitrate is recalculated
accordingly, a list of reasonable preset values is
available for convenience. BPP and bitrate follow
changes of the frame size immediately.
- A new preset "Default BPP" (in the misc section) is used
by default for newly ripped titles once set.
- Bitrate calculation sheet now shows different calculations
depending on whether a manual bitrate was set or not.
Suggested by Daniel Faber.
- Subtitle preview improved; old tedious test transcoding
dropped, instead you can open a realtime transcode preview
window straight from the Subtitle tab without opening
the transcode Filter dialog first. Movie starts with a
leadtime of 15 seconds before the first subtitle timestamp.
- Keyframe interval can be edited on the transcode page.
transcode defaults internally to 250, now you can change
this (dvd::rip defaults to 50).
- Added a patch from Larry Siden <lsiden AT gmail.com>
which makes dvd::rip compatible with dvdrecord. Just
select "dvdrecord" as the CD burning command (a
correspondent preset was added) and dvd::rip will
generate a proper command line for dvdrecord.
- Added DVD device placeholder %d to the DVD player command
template and extended the xine and mplayer default commands
accordingly. This is necessary if DVD devices located at a
different path as the /dev/dvd default.
- dvd::rip now workarounds transcode NPTL bugs by setting
LD_ASSUME_KERNEL. If you encounter problems with this
you can switch this off in the Preferences / Misc section.
- Cluster mode
- Execute jobs with umask 0002. This helps solving
permission problems, if commands are executed by
different users on the nodes. With this umask the
correponding users merely need to be in the same group.
Based on a request from Triffid Hunter <triffid_hunter
AT funkmunch.net>.
- Don't log fping command. It's useless and too noisy.
- Set LD_ASSUME_KERNEL on the nodes as well if set on
the master.
Bugfixes:
- mplayer CVS versions are now recognized properly. A
CVS version always satisfies the dependency module,
assuming people using CVS versions know what they're
doing ;) Thanks for reports and hints to Philippe Monroux
<monroux-listes AT wanadoo.fr>, Christian Marillat and
Fabio Russo.
- xvid4conf didn't read the defauls properly from
~/.transcode/xvid4.cfg, looks like ~ isn't substituted,
although this is xvid4conf's own default. Now dvd::rip
passes the full path.
- Filters didn't work since 0.52.3. Thanks for the report
to Christian Marillat.
- Combo box tooltips didn't appear in the Preferences
dialog.
- OGG overhead wasn't calculated correctly if a frame
range was set. Thanks for the report to Daniel Faber.
- Filter preview window: fixed a race condition when
starting transcode; now wait max. 10 seconds on transcode
startup using a Glib timer. Thanks for the bug report
to Mathias Anselmann <M.Anselmann AT web.de>.
- Cluster mode: when merging video chunks of a PSU in an
OGG/Vorbis project the progress information was missing.
0.52.3 [stable branch] Sun Mar 13 2005, joern
Features
- Updated french translation from Christophe Combelles
<ccomb AT free.fr>
- Skip 1st pass (if "reuse log" is checked) even if
Ogg/Vorbis vbr audio is enabled.
Bugfixes:
- PCM passthrough didn't work.
- Newer transcode release seem not to need -d for
PCM audio tracks anymore, so it's used only with
versions < 0.6.13.
- Mistaken switch to RGB color space if audio only
filters are added to the filter chain. Reported
by Dag Rune Sneeggen <contactus AT dudcore.net>.
- Applied a patch from Fabio Russo fixing a potential
problem with mplayer playback of DVD titles with
an audio codec reported by transcode as 'mpeg1',
although neither Fabio nor I ever had such a DVD
in the hand ;)
- Removed POSIX::setlocale(), since it's not necessary
and probably the reason for a crash on Mandrake.
0.52.2 [stable branch] Sun Jan 9 2005, joern
Bugfixes:
- Missed adding Italian and Serbin translation files to
the distribution tarball.
0.52.1 [stable branch] Sun Jan 9 2005, joern
Features:
- Italian translation added by Fabio Russo and Costantino.
0.52.0 [stable branch] Tue Jan 4 2005, joern
Notes:
- This is just a stable release of 0.51.4. Only change
is that the suggested transcode minimum version is 0.6.14.
- For changes since the last stable release 0.50.18 please
refer to the change log entries of the 0.51 branch.
0.51.4 [unstable branch] Sat Dec 13 2004, joern
Bugfix:
- The central dvd::rip tools dr_splitpipe and dr_progress
where broken due to changes to the Makefile. Thanks for
the reports to Lukas Postupa <postupa AT gmx.de> and
Christian Marillat.
0.51.3 [unstable branch] Sat Dec 11 2004, joern
Features:
- Set transcode -M 2 as default for NTSC movies to improve
A/V sync unless the user provides -M on its own using
the transcode options entry. Suggested by Peter Hutnick
<hutnick AT gmail.com>. Note: default is -M 1, so enter
this to transcode's option entry if the new -M 2 doesn't
work for you.
- More generic Makefile for the dvd::rip parts written in C.
Thanks for the patch to Mike Frysinger <vapier AT gentoo.org>.
Bugfixes:
- Cluster mode / OGM: PSU chunks were not deleted afterwards
even if the user requsted that. Thanks for the patch to
Jonathan Hall <flimzy AT flimzy.com>.
- Increased portion of data to be analyzed for detailed
audio characteristics after ripping. Should fix problems
with wrong detection of AC3 bitrates and switching off
AC3 passthrough. Thanks to Nicholas E Andrade <neandrad
AT ieng9.ucsd.edu> who helped figuring that out.
0.51.2 [unstable branch] Fri Oct 29 2004, joern
Notes:
- If you want to use transcode 0.6.13, you need this
dvd::rip release. Older releases doesn't work.
- Unfortunately transcode 0.6.13 has a bug which
affects most operations of dvd::rip. You need
to recompile transcode with a tiny patch, which
is contained in dvd::rip's tarball:
patches/transcode-0.6.13-bitstream.patch
Features:
- Deinterlace preset 'smartdeinter' now uses transcode's
smartyuv filter instead of smartdeinter. It's much faster,
assembly optimized and works in YUV colorspace.
- Bojan Bozeovic added a Serbian translation.
transcode 0.6.13 compatability:
- Previews were flipped and wrongly colored. Thanks for
the patch to Robin Hill <robin AT robinhill.me.uk>.
- transcode's colorspace default setting changed from
RGB to YUV, this required according changes in dvd::rip.
0.51.1 [unstable branch] Sun Oct 10 2004, joern
Notes:
- A new dependency: the Perl module Locale::TextDomain,
often packaged as libintl-perl resp. libintl-xs-perl
in many distribtions.
Bugfixes:
- Merging multiple PSU's with OGG/Vorbis in cluster mode
didn't work. Thanks for the reports to Daniel Baughman
<danrb AT codenet.net>, Sybren <sybren AT thirdtower.com>
and Henning <einpfundhirn AT web.de>.
- backup.rip creation failed if project's tmp/ directory
was missing. Thanks for the report to Felix Knecht.
- Gray out RIP button in DVD Image and DVD on-the-fly modes,
because makes no sense here. Thanks for the report to
Geoffrey Trexler <skynet AT charter.net>
- dvdrip --help didn't work with recent Perl versions
Features:
- Full localization support (l10n). A lot of work for
this was done by Oliver Kramer, who translated dvd::rip
to German and send me a patch, which turned dvd::rip
into a German version. I used this patch to extract
all messages from dvd::rip source code and converted
it to a patch, which added gettext() like calls, instead
of a hardcoded German translation. Read l10n/README
if you're interested in maintaining translations
and contact me.
- Translations and their maintainers in this release:
Czech: Ales Tosovsky <tosovsky AT wo.cz>
French: Sebastien Corot <scorot AT libertysurf.fr>
German: Jörn Reder <joern AT zyn.de>
Spanish: Sergio Cambra <runico AT users.berlios.de>
The file l10/MAINTAINERS will always list all
actual translation maintainers.
- Support for Vorbis quality of -1, suggested by
Bennett Perkins <bennett.perkins AT optusnet.com.au>.
0.50.18 [stable branch] Sun Apr 18 2004, joern
Bugfixes:
- ac3 passthrough was broken. Thanks for reporting
to James Broberg <jbrobergAT cs.rmit.edu.au> and
TOSOVSKY Ales <tosovsky AT znalecka.cz>
0.50.17 [stable branch] Sat Apr 10 2004, joern
Features:
- support for another transcode deinterlacer (I=5),
suggested by Jean-Yves Simon <lethalwp AT tiscali.be>
Bugfixes:
- mp3 samplerate setting didn't work, only 48khz
for CVD. Thanks for the report to Neverstopdreaming
<neverstopdreaming AT tiscali.it>.
- dvd::rip couldn't open empty project files
- prevent timeouts when encoding Ogg/Vorbis in cluster mode
- vobsub creation now splits with millisecond precision,
thanks for the patch to Jean-Yves Simon
0.50.16 [stable branch] Sun Oct 26 2003, joern
Note:
- If you have Perl 5.8.1 you *need* this release. Older
versions of dvd::rip do not work with Perl 5.8.1.
Features:
- New checkbox "Reuse log" for 2-pass encoding on the
Transcode tab. Once activated an existent 2-pass
logfile will be reused resp. pass 1 is skipped. This
way you can continue a 2-pass transcoding if the 2nd
pass went wrong for some reason. Long awaited feature
requested by many users, including myself ;)
- Workaround for transcode filters which declare options
multiple times (as the unsharp filter in transcode
0.6.10). Reported by Fabio Russo.
Bugfixes:
- Perl 5.8.1 compatability issue fixed. Opening project files
saved with a Perl 5.8.1 dvd::rip didn't work.
- Transcode diskspace calculation was wrong in chapter mode.
- cdrecord-clone (Debian unstable) is detected correctly now.
Thanks for the report to Ben Handley <ben AT steelgarden.com>
and Christian Marillat <marillat AT free.fr>.
- XVCD multiplexing didn't work for higher video bitrates.
Reported by <dvdrip AT vikas.mailshell.com>.
- Deinterlacing settings 'smart' and 'inverse telecine' didn't
restore correctly after saving/reopening. Reported by
xavier <list.dvdrip-users AT natch.dyndns.org> and
Jean-Yves Simon <lethalwp AT tiscali.be>.
- If the transcode installation lacks filters, which are still
referred in the project file, these referrals are removed to
prevent dvd::rip from later crashing. Reported by <jawashin
AT uiuc.edu>.
- Video bitrate 'manual' setting wasn't deactivated when
switching from X(S)VCD to (S)VCD.
- Cluster control window: when removing a project the first
project was selected internally but not on the GUI. Reported
by Mark Rose <shifted AT shifted.ca>.
- Ripping and snapshot grabbing failed if the title had no
audio at all. Reported by Sean Dwyer <ewe2 AT can.org.au>.
- dvd::rip hung if a autoadjust preset was applied on a
completely black frame.
0.50.15 [stable branch] Sun Aug 24 2003, joern
Features:
- Expanded the subtitle selection popup to the maximum of
32 entries, not only the probed entries. With some DVD's the
subtitle probing fails. This way you can select even
"impossible" subtitles, if they weren't detected correctly.
Thanks for the suggestion to Stefan Raspl <stefan.raspl AT
playofmind.net>.
- Blank CD-RW (uses the configured cdrecord command and device),
supporting 'fast' and 'all' methods (choose in the preferences).
Not really tested yet due to lack of CD-RW media. Suggested
by <dvdrip AT vikas.mailshell.com>.
- New preference "Preferred language". Default audio track
and subtitle are selected accordingly after reading TOC,
resp. the first audio track / subtitle matching the
preferred language will be selected. Note that you still
should review this setting, because the first matching item
found must not be the one you really want. Suggested by
John Washington <washingtonj AT acm.org>. Credits for the
list of available language codes go to Chris Phillips
<acid_kewpie AT users.sourceforge.net>, the author of lsdvd,
from which I extracted the list.
- Video codec list takes the new XviD variants of transcode 0.6.9
into account (xvid, xvid2, xvid3 and xvid4). For earlier
transcode versions still xvid and xvidcvs are listed here.
- Support for xvid4conf, a tool to tweak all options of the
new dev-api-4 XviD codec. You need at least transcode 0.6.9
and xvid4conf 1.6 for this to work.
Note: the xvid4 settings will be used for all titles of your
project. Also they don't take effect in cluster mode. This will
change for future dvd::rip/transcode releases.
New/Changed X?S?VCD|CVD stuff:
==============================
- Renamed '(S)VCD' container format to 'MPEG', which is in fact
what it is.
- Added new MPEG "Codecs": XSVCD, XVCD and CVD
- SVCD and VCD create standard conform streams. You
can't change parameters to non-standard values.
- XSVCD and XVCD allow you to choose arbitrary video and
audio bitrates / samplerates.
- CVD allows you everything (like X(S)VCD), but additionally
dvd::rip checks for correct frame sizes.
- Added new Clip & Zoom presets: CVD anamorph and XSVCD
anamorph for PAL and NTSC.
- Added new Preference: "Default Container Format", fixing also
a mismatch, if you choosed 'SVCD' or 'VCD' as a default codec,
but dvd::rip still set to 'avi' container format by default.
- Audio bitrate 224 was missing in the popup list.
- Renamed 'Target format' to 'Select container' and the 'Video
codec' label got renamed to 'MPEG variant' for the MPEG
container"
Thanks to James L. Paul who urged me to implement the CVD
stuff, which hopefully introduced not too many bugs ;)
Bugfixes:
- mplayer DVD player command didn't work for LPCM tracks.
Thanks to Fabio Russo for the patch. You must re-select
the mplayer command from the Preferences page for this to
take effect.
- Free diskspace warning wasn't exact. Thanks for the patch
to Moritz Muehlenhoff <jmm AT informatik.uni-bremen.de>.
- Fixed a typo in the --avilimit option (for AVI files >2GB).
Thanks for the report to Jarkko Seppa <Jarkko.Seppa AT oulu.fi>.
- Default target size was set to 1406, instead of 1400 (2x700).
0.50.14 [stable branch] Sun 29 Jun 2003, joern
Features:
- transcode >= 0.6.6 sets mpeg2enc -I 0 by default, but
older versions doesn't. This speeds up things signifcantly,
because now mpeg2enc skips deinterlace processing (it was
done even for non-interlaced material and wasted time).
dvd::rip now sets -I0, too. Thanks for the hint to
Simone Lehmann
- Warn about AVI files >2GB and set transcode option
--avi_limit 9999, otherwise transcode splits automatically
at 2GB.
Bugfixes:
- NTSC A/V sync enhancement: dvd::rip's -x vob,null transcode
option in the 1st pass of a multipass transcoding was
good for performance, but could be bad for A/V sync with
some NTSC material, because the audio information is always
needed for proper synchronisation. Thanks to Florin and
Tilmann for figuring this out.
- NTSC: -M2 isn't set anymore by dvd::rip, because transcode
does autodetect this. Thanks to Tilmann for the hint.
- Fixed a small mismatch (about 1%) in the audio size
calculation, which affected video bitrate calculation.
Thanks for the report to Charles François Rey
<charlesfr.rey AT epfl.ch>.
- Automatic setting of PERLIO=stdio failed, if PERLIO
was already set to some value. Thanks for the report to
Richard Kilgore <rkilgore AT hotpop.com>.
- Progress bar was messed up with PSU core. Thanks for the
report to Tyler <dvdrip AT unixgod.net> and Florin.
- NTSC: resolution was set to 720x480, even if the movie
had 704x480. dvd::rip now sets no resolution at all, because
transcode autodetects the resolution. Thanks for the report to
Francisco J. León <fleona AT cantv.net>.
0.50.13 [stable branch] Thu 23 May 2003, joern
Features:
- New deinterlace preset: inverse telecine (for NTSC).
Suggested by Andrew Ukrainec <ukrainec AT sympatico.ca>
and Thanasis Tsiodras <ttsiod AT softlab.ece.ntua.gr>.
- Added dvdxchap dependency (which is part of ogmtools),
because you get proper chapter progress bars only
if dvdxchap is installed.
Bugfixes:
- Removed a small copy protection related function. You
can read details about why this happened on
http://www.exit1.org/dvdrip/ news entry 2003/05/23.
- Default disc size for a new project was still 703 MB
(instead of 700). Also the Zoom Calculator showed
703 MB in the disc size popup. Thanks for the report
to Fridtjof Busse.
- Audio bitrate combo box popdown button was sensitive
for VCD, although VCD has a fixed rate of 224. Reported
by Andreas Volz <andreas AT brachttal.net>.
- Sometimes the chapter progress bar was messed up, if no
dvdxchap is installed on the system (which is part of
ogmtools).
0.50.12 [stable branch] Thu 1 May 2003, joern
Features:
- Yet another useless feature ;) You can start the
dvdrip-master cluster control daemon with the -w
option to fire up a webserver (listening on port 8888
by default, can be changed with -W) which delivers
the cluster status as HTML. Based on an inspiriation
by Fabio Russo. Maybe somewhat senseless but much fun
to implement ;)
Bugfixes:
- Removed the LD_ASSUME_KERNEL workaround for RedHat 9.
At least on gentoo dvd::rip didn't start anymore. So
all RH9 users, which suffer from the transcode/NPTL
problem, need to set LD_ASSUME_KERNEL=2.2.5 on their own
before starting dvd::rip. Thanks a lot to Fridtjof Busse
who helped me debugging this issue.
- When no title is selected all notebook pages with title
specific settings are disabled now. Some entries threw
exceptions if you enter them with no titles selected.
Thanks for the report to Fabio Russo.
- Prefefined mplayer command played all chapters from the
selected chapter on. Now it plays only the one selected
chapter. Thanks for the report to Fabio Russo.
0.50.11 [stable branch] Sat 26 Apr 2003, joern
Note:
- To all RedHat 9 Users: RedHat's default kernel uses
the new Native Posix Thread Library, which makes problems
with transcode. Setting the environment variable
LD_ASSUME_KERNEL=2.2.5 may workaround this problem (also
installing all RedHat errata). dvd::rip now sets
LD_ASSUME_KERNEL, just to prevent "yet another FAQ" ;)
There are reports, that it doesn't work even with this
variable set. Please keep an eye on the transcode-users
list, if you suffer from this problem. I can't help you -
don't use RedHat ;)
Bugfixes:
- dvdrip -v reported nothing, in particular not the version
number ;)
- Movies with no audio track within the first few MB of the
stream made strange problems. Added -H 10 to the
correspondent transcode commands, which extends the
area of audio probing, so this shouldn't happen anymore.
Thanks for the hint to Tillmann Bitterberg.
- Changed 703 MB cd preset to 700 MB. 703 was too tight.
Also added the "-overburn" option to the cdrecord command.
- Workaround for a transcode bug: for NTSC movies the frame
rate sometimes isn't detected propery from DVD. Only
probing the VOB's after ripping reports always the correct
frame rate. Thanks for the report to Douglas Bollinger.
- Progress bar was messed up when transcoding with PSU Core.
Thanks for the report to Douglas Bollinger.
- Cluster mode: the dr_exec program (part of dvd::rip) was
needed on remote nodes, although no dvd::rip software is
installed on them. This is fixed now, no dr_exec necessary
anymore on remote nodes. Thanks for the report to Lethal
Weapon.
- Reduced OGG overhead value for video bitrate calculation.
from 1.15% to 0.25% of total stream size, which is an
estimation based on several test rips I made (using xvid,
which has obviously the best vbr control from all existent
mpeg4 codecs). With this value most of my test rip's hit
the target size with a maximum error of 1 MB.
0.50.10 [stable branch] Tue 1 Apr 2003, joern
Features:
- If you re-read the TOC you get a warning, that this will
override all settings of the current project.
- A warning message appears, if you add a project with frame
range setting to the cluster, because always the full movie
is transcoded in cluster mode.
Bugfixes:
- GUI doesn't block anymore on first DVD access when reading
TOC. Also the complete tcprobe output is printed, if
something went wrong, which helps solving transcode related
problems.
- Extended preferences check of the cdrecord device, which
also may be a device file on Linux 2.5 systems, since
IDE burning support is native here. Thanks for the hint
to Moritz Muehlenhoff <jmm AT informatik.uni-bremen.de>.
- Transcoding a frame range in chapter mode didn't
show correct progress information. Reported by Ole Tange.
- Viewing a subtitle test transcode movie in chapter
mode didn't work.
- A video avi file was generated during the first pass with
ogg quality proccessing. Thanks for the report to Jonathan
Rogers.
0.50.9 [stable branch] Fri 28 Mar 2003, joern
Features:
- Dropped cluster mode restriction for OGG projects
with more than one PSU. Thanks for the patch to
Jonathan Rogers <jonner AT mailandnews.com>.
Now dvd::rip needs ogmtools >= 0.972.
Bugfixes:
- Fixed another division by zero condition in the
Clip & Zoom module. Thanks for the report to
Mike Oosten <shaggy AT slavery.cx>.
- Burning page was disabled if only one of the four burning
related tools (mkisofs, cdrecord, vcdimager, cdrdao)
was missing, although you e.g. don't need mkisofs for VCD
burning and no cdrdao for CDROM burning. Now dvd::rip
is more specific here und disables only the corresponding
burning types.
- Adjusted xine DVD player preference for actual versions
of xine. Thanks for the hint to Fridtjof Busse.
- Additional transcode options entry didn't work (most
probably since 0.50.4). Thanks to James L. Paul <james AT
mauibay.net>
- Vorbis quality mode didn't work in cluster mode. Thanks
for the fix to Jonathan Rogers.
- Lock audio selection popup, during a volume rescale
scan. Otherwise the scanned value would be assigned to the
latest selected channel, which may be wrong. Reported
by Felix Knecht.
0.50.8 [stable branch] Thu 6 Mar 2003, joern
Bugfixes:
- Cluster mode: dvdrip-master daemon bailed out with an
error message on startup. Thanks for the report to
David Chan <davidchan AT rcn.com>.
- Cluster mode: if file cleanup was requested and file
splitting not necessary (because the file is smaller
than one disc) the transcoded file was removed.
0.50.7 [stable branch] Tue 4 Mar 2003, joern
Bugfixes:
- Encoding multiple audio tracks with OGG and PSU core
enabled didn't work. Thanks for the report to Daniel Egger
<degger AT fhm.edu>.
- Revoked the mplex change from version 0.50.4, because
several users reported problems with it.
0.50.6 [stable branch] Mon 3 Mar 2003, joern
Bugfixes:
- Fixed an evil bug, which overwrote the preferences file
on each startup. Sorry for the inconvenience. I also lost
my preferences due to it... Thanks for the report to
Matthias Saou <matthias AT rpmforge.net>.
0.50.5 [stable branch] Mon 3 Mar 2003, joern
Features:
- You can pass the preferences filename with the new command
line option -p to have multiple configurations (default
is still ~/.dvdriprc). Suggested by Harald Dunkel.
- Log last output of aborted job's. Suggested by Felix Enning
<felix AT hfsclub.de>.
- Don't split the movie, if it fits already on one disc.
Suggested by Nicos Panayides <anarxia AT gmx.net>.
- subtitle language ID is now patched into the vobsub .idx
file, requested by Douglas Bollinger.
Bugfixes:
- Video bitrate entry was not greyed out for VCD. Other
bitrates than the standard value of 1152 are not supported.
- Creating splitted vobsub's was broken. Thanks for their
reports to Lutz Birkhahn <lutz.birkhahn AT gmx.de> and
Douglas Bollinger.
- transcode's version number was missing in .dvdrip-info file.
0.50.4 [stable branch] Sun 24 Feb 2003, joern
Features:
- Minor layout improvements. GUI should now look better with
different sized fonts.
- I removed the ps command dependency - found a completely
different and more flexible solution, which doesn't depend
on external tools. A new helper program called dr_exec
is used to print the main PID of the current job, which is
needed for cancellation.
Bugfixes:
- Wrong options were passed to transcode for Vorbis quality
encoding. Thanks for the report to Brian Healy <brianhealy
AT vodafone.ie>.
- mplex SVCD command used wrong profile for SVCD. Thanks for
the report to Davros <tashuu AT newsguy.com>.
- Using the smart deinterlacer switched off YUV processing,
which isn't necessary for transcode >= 0.6.3 anymore. Thanks
for the report to Mark Dirix.
0.50.3 [stable branch] Mon 17 Feb 2003, joern
Bugfixes:
- Dropped the pstree dependend stuff completely. Now ps
is used, using Posix conform options only, so this should
work on most systems without problems.
- Thanks to Ron Smits, who reported a problem with a few
zombie processes per dvd::rip session on a Slackware system.
After about an hour of IRC chatting we found a solution
for it ;)
0.50.2 [stable branch] Sat 15 Feb 2003, joern
Features:
- Some layout optimizations: squeezed the GUI again a bit
and the preview images are now slightly bigger.
Bugfixes:
- Fixed a typo in SVCD transcode command. Reported by
several users.
- Cancellation of some tasks left processes over. Changed
back to old cancellation method, which depends on
pstree, so this is now listed "mandatory" in the dependency
window. Reported by Fridtjof Busse <fridtjof AT fbunet.de>.
- Depend check didn't check for absolute path of
/usr/sbin/fping. Also reported by Fridtjof Busse.
- Cancellation of a vobsub PS1 extraction left files over,
so further vobsub PS1 extraction didn't work. Thanks for
the report to Gregorio Guidi <g.guidi AT sns.it>.
- Changed two internal Perl namespaces, which confused the
CPAN/PAUSE Perl module indexer.
0.50.1 [stable branch] Tue 11 Feb 2003, joern
Bugfixes:
- NTSC VCD film encoding (at 23.976) didn't work. Thanks for
the report to Chris Elston <celston AT corky.sapien.net>.
- dvd::rip's main window was too tall for standard desktops
with 1024x768 resolution. I could save some space within
the "Calculated storage" frame to fix this. On my system the
window has now 657x696 pixels, which should be Ok for
1024x768 desktops. Thanks for the report to Florin.
- Subtitle selection wasn't activated, even if subtitle2pgm
was detected correctly.
0.50.0 [stable branch] Mon 10 Feb 2003, joern
Notes:
- This is a new stable release, closing the 0.49.x unstable
branch.
- Project file format changed since 0.48.x. Older files are
converted automatically, but you can't use files saved with
this release with older dvd::rip versions.
- You should use at least transcode 0.6.3 to get all new features,
but transcode 0.6.2 is still supported.
- To get full and bugfree support for the new Filter & Preview
feature, read the entry of 0.49.11 and apply the patch mentioned
there, unless you have transcode > 0.6.3 (which doesn't exist
as of this writing).
- From now on dvd::rip insists on Perl >= 5.6.0.
- For a full list of changes and bugfixes, refer to the 0.49.x
change log entries below. Features and bugfixes listed next
are changes to 0.49.13.
Features:
- New button "Check all settings" in Preference dialog.
Suggested by Ole Tange.
Bugfixes:
- Dependencies listed ogmtools with minimum 0.954, but correct
is 0.960 (mp3/ac3 only works since this version).
- Dependency check didn't consider maximum rar version (must be
a 2.x version, no 3.x).
- Filter removal didn't affect an opened preview window.
- Negative values in the cropping entries were rejected. Thanks
for the report to Mauro Spluga <ferluga AT inwind.it>
0.49.13 [unstable branch] Sat 08 Feb 2003, joern
Features:
- A more sophisticated dependency check. A new window (menu item
"Debug/Check dependencies") lists all needed tools with
minimum, suggested and installed version numbers. On startup
dvd::rip opens this window with a corresponding error message,
if a mandatory tool is missing. Optional modules are disabled,
if the correspondent tool isn't installed (affects subtitles,
(S)VCD, OGG/Vorbis and CD burning).
- Filter & preview: an activated subtitle rendering (from the
Subtitle page) is passed through, so this is a better option to
test your subtitle settings - compared to the slow test
transcoding facility on the Subtitle page.
- PSU core is enabled by default only for NTSC movies which
have more than one PSU. Thanks for this suggestion to Florin.
- Full volume scanning support in chapter mode. A patch from
Kianusch Sayah Karadji.
Bugfixes:
- Filter preview: transcode has to be started with -u 1,
otherwise pause/undo jumps between different frames. Thanks
to Tilmann for the hint.
- Enabled nice for all cluster jobs (was enabled only for video
transcoding). Reported by Michael Dratz <midra AT web.de>.
- A uncaught exception was thrown, if dvd::rip couldn't connect
to a remote cluster master daemon. Reported by Fabio Russo.
0.49.12 [unstable branch] Thu 06 Feb 2003, joern
Bugfixes:
- Reading TOC threw an exception, reported by Tilmann.
- Opening a filter preview frame with a freshly ripped
title segfaulted transcode, because the preview buffer
size was empty. Now it's 20 by default.
- Stopping a paused preview window didn't close the window.
0.49.11 [unstable branch] Thu 06 Feb 2003, joern
Note:
- Filter & Preview enabled only for transcode >= 0.6.3 stable.
Features:
- Added a warning message about non-standard (S)VCD frame sizes.
- SVCD video framerate is now limited to a maximum of 2600
(overall bitrate as supplied before is limited to 2748).
- Added Open/Close DVD/Burner tray buttons on Title and Burn pages.
Based on a patch from Kianusch Sayah Karadji <kianusch AT
sk-tech.net>. You need to configure your "burner device" in the
Preferences and must have the 'eject' command installed on your
system.
- Special support for logo, logoaway and mask filters: you
can select a rectangular area on the preview window and
the corresponding position / size values are automatically
filled into the entries on the GUI. For PRE filters (currently
mask only), the coordinates are transformed correctly - needed
because the preview window shows the POST result, while the
filter expects PRE coordinates (prior clipping and resizing).
Also in YUV mode dvd::rip takes care, that the values are even.
- File selection dialog for filename filter options.
- YUV is automatically disabled, if you have a filter which
supports RGB only (indeed, currently all transcode filters
support YUV) or if you crop or resize with odd values.
So now there is no need for the "YUV internal" checkbox to
come back.
- Filter preview loops, if end of the movie or frame range
is reached.
- Applying filters in pause mode enabled again - also the "Undo"
button is back. You need transcode 0.6.3 with this patch
from Tilmann: (to be applied on vanilla 0.6.3)
http://www.exit1.org/dvdrip/dist/patches/tc-0.6.3-preview-pause.patch
% cd transcode-0.6.3
% patch -p1 < tc-0.6.3-preview-pause.patch
- Multiple instances of the same filter are now fully supported.
Bugfixes:
- VCD Clip&Zoom presets didn't produce correct aspect ratio.
Thanks for the hint to Simone Lehmann <simone AT lisanet.de>.
- Quotes in the project name resp. project paths confuse
dvd::rip. The path fields on the storage page now reject
a bunch of special characters, as a first bugfix. Thanks for
the report to Spencer Ogden <spencero AT mail.utexas.edu>.
- Added mpeg2enc options "-I 0 -p" for NTSC 23.976 fps movies,
because otherwise A/V sync is messy. Thanks for the hint
to Andrew Ukrainec <ukrainec AT sympatico.ca>.
- Closing the "Configure filter" window when a preview
window was playing, didn't close the preview window
also.
- PSU core disabled for filter preview, because the generated
transcode command doesn't work with it. Thanks for the
report to Douglas Bollinger.
- GUI for filters with no options (e.g. dilyuvmmx) was messed up.
- Changing some filter frame range options didn't work.
- Some legal fractional values were rejected by dvd::rip's
value check module.
- Fixed a typo on the burning page. Thanks to Yves Duret
<yves AT zarb.org>.
0.49.10 [unstable branch] Tue 28 Jan 2003, joern
Features:
- transcode filter description cache is automatically
refreshed not only when transcode was updated, but
also when the corresponding dvd::rip module changed.
Bugfixes:
- A broken .dvdriprc file could crash dvd::rip with a
confusing error message. Now a better error message
is printed, which suggests to remove the broken file.
- Filter & Preview:
- Options of 'logo' filter were not recognized correctly.
Reported by Tilmann.
- Adding 'logoaway' filter threw an exception. In general
some filters with checkbox options didn't work correctly.
Also reported by Tilmann.
- Parameter passing for filter options with multiple values
didn't work.
- Broken filter default setting parser removed. Now
String::Scanf is used, which is copied into dvd::rip's
library tree, to keep the dependencies low.
- transcode currently doesn't support reliably to apply filter
changes in paused mode, so this isn't possible on the GUI
anymore. The "Undo" button became useless due to that, so it
was also removed. Now everything that's possible, should
work as expected ;)
- Closing the preview window now works and stops the
corresponding transcode process cleanly.
Note: you need to patch your transcode for that. Download
http://www.exit1.org/dvdrip/dist/patches/tc-20030123-preview-close.patch
(from Tilmann) and and apply it with
% cd transcode-0.6.3-20030123
% patch -p1 < tc-20030123-preview-close.patch
Any newer snapshot as 0.6.3-20030123 should have that
patch included, soon. Older unpatched versions show the
same erroneous behaviour - so don't close the preview
window with them and use the 'O' button instead.
0.49.9 [unstable branch] Mon 27 Jan 2003, joern
Features:
- A new experimental dialog "Configure filters". All filters
supported by transcode's new socket interface are available
here for configuration. You need at least transcode 0.6.3.20030123
for it. But it's not only a comprehensive configuration
dialog - you have a live preview window and can check your
changes in realtime WYSIWYG - it's really cool, guys. Thanks
to Tilmann, who implemented the transcode part and send me
patches immediately after my bug reports ;) Currently there
is no documentation, hopefully the GUI is somewhat self-
explanatory. Nevertheless: a short quick start guide:
- click "Configure filters & preview" on the transcode page
- double click on the "invert" filter in the left filter list
- click on the ">" (Play) Button
- a preview window opens, showing the movie inverted
- disable the "Enable filter" checkbox
- click on "A" (Apply) - the movie immediately gets
normal again
- any filter setting changes can be applied in realtime
by clicking on the "A" button at any time.
- click on the "||" (Pause) button
- now you can navigate through transcode's internal preview
buffer (you can modify the size of this buffer with the
first entry in the "Preview settings" frame). "<<" and ">>"
navigate by frame, "<<<" and ">>>" usually by 5 frames
(resp. higher values for higher buffer sizes). You get green
frames, if you access parts of the buffer, which aren't
filled yet.
- in pause mode:
- change a filter setting
- click on "A" (Apply)
- the current picture is rendered with the new setting
- now click on "U" (Undo)
- the picture before you applied the last time is restored.
This way you easily can compare two filter settings.
- (see note about this in the "Known bugs" section beyond).
- the preview window runs with maximum speed. You can slow
done resp. speed up again using the "-" and "+" buttons.
- click on "O" (Stop) to close the preview window
- Dropped "Antialias" setting on transcode page. It's seldom
used and you still can enable it using the new filters
dialog (videocore filter, -C option).
- Progress information for chapter ripping. dvd::rip uses
dvdxchap, which is part of ogmtools, to get the chapter
lengths. If you don't have ogmtools installed, dvd::rip
falls back to the old bevhaviour showing no ripping progress
for chapters.
Known bugs:
- For some reasons the pp filter doesn't work with the
filter configuration dialog. Have to debug this.
- Just closing the preview window doesn't really stop the
process, you anyway must hit the stop button. Sometimes
you even must kill transcode processes by hand, if you
closed the preview window. Have to discuss this with Tilmann.
- Multiple applying and undoing settings on a paused frame is
cumulative. Also a subject of discussion with Tilmann ;)
- transcode supports adding some filters multiple times. Due
to a bug in transcode (or in dvd::rip - not figured out finally)
this doesn't work with transcode 0.6.3.20030123, so it's
disabled on dvd::rip's GUI until it works.
Bugfixes:
- Reduce disc size passed to avisplit/ogmsplit to decrease
the risk of a oversized file. Thanks to Felix Knecht
<felixknecht AT web.de> and Julio Sánchez for report and
discussion.
- Adding (S)VCD projects to cluster using the menu entry
isn't possible anymore - (S)VCD is not supported by
cluster mode. The corresponding button was disabled, but
the menu entry not.
- Remove trailing whitespace from path's on the storage page.
This makes pasting from an xterm easier, if the buffer
contains a trailing newline. Requested by Tilmann Bitterberg.
- Subtitle preview grabbing threw an exception.
0.49.8 [unstable branch] Mon 13 Jan 2003, joern
Bugfixes:
- Frame range "end" entry didn't work anymore. Christoph's
frame range patch of 0.49.7 was correct, but I applied an
erroneous "optimization" ;)
- Fixed a typo: preset "SVCD 16:9 anamorph, PAL" actually is
"SVCD anamorph, PAL".
0.49.7 [unstable branch] Mon 13 Jan 2003, joern
Notes:
- From now on dvd::rip insists on Perl >= 5.6.0. Older
versions don't provide the syntactic sugar I like.
- Added a COPYRIGHT file, with references to all developers
who contributed patches and share the copyright.
Features:
- Multiple audio track support for SVCD (you get a warning
if you select more than two tracks, because this isn't
standard conform).
- A new checkbox "Use range" on the Transcode page enables
considerung a given frame range for video bitrate
calculation. This was implemented by Christoph Bartoschek
<bartoschek AT gmx.de>.
- Single instance windows now pop up into foreground if
opened again. A patch from Matthias Riese.
- DVD TOC occupies now all space available. Again a patch
from Matthias Riese.
- Burn page filename list occupies now all space available.
Yet another a patch from Matthias Riese ;)
Bugfixes:
- Removed any conditional code for transcode versions < 0.6.2.
This fixed also a missing "--print_status 20" transcode
parameter, which increased video transcoding load
unnecessarily. Thanks for the report to Vlad Spichek
<spy AT mbox.ath.cx>.
- According to a hint from Julio Sánchez mpeg2enc's -S
parameter is set to 10000 for non-splitting operation,
because mpeg2enc splits by default at 700 MB.
- smartdeinter setting wasn't restored after opening a
project file. Reported by Christian Lambert.
- Adjusted smartdeinter settings according to a suggestion
of Christian Lambert:
-J smartdeinter=threshold=10:Blend=1:diffmode=2:highq=1
- Frame range: entering illegal ranges (start > end) is
prevented now. Thanks for the report to Christoph Bartoschek.
- Most 'focus-out' handlers are 'changed' handlers again.
Transfering changes to the internal object data structure on
focus-out is confusing resp. sometimes user has to click
somewhere to trigger it explicitly. Reported by Florin Andrei.
- Burning tab: some unusal named (S)VCD image files weren't
recognized correctly.
- Preferences: ffmpeg4 preset became ffmpeg. Setting 'ffmpeg'
from preferences didn't set af6/ffmpeg codec to 'mpeg4'
automatically. Reported by Christian Lambert.
- Added fail safe code for a possible "illegal by division by
zero" condition in bitrate calculator. Reported by Christoph
Bartoschek.
- "View AVI" was too fuzzy regarding filename globbing (.mpg
files were included). Reported by Markus Dewerny.
0.49.6 [unstable branch] Tue 7 Jan 2003, joern
Features:
- WAV creation command now printed in the debugging window.
Bugfixes:
- WAV creation resulted in white noise for lpcm tracks.
Thanks for the report to Damien Covey <djcovey AT
softhome.net>.
- WAV creation didn't worked for Chapter mode. Also reported
by Damien Covey.
0.49.5 [unstable branch] Mon 6 Jan 2003, joern
Features:
- rar command (for vobsub compression) is now configurable.
Suggested by Mikkel Mondrup Kristensen <mikkel AT tdx.dk>.
Bugfixes:
- CD size wasn't set in (S)VCD transcode command. Reported
by Markus Dewerny <dewerny AT web.de> and Dirk Aust
<dirk_aust AT gmx.de>.
- Clip & Zoom: width and height of zoom/clip2 stages didn't
update correctly if no zoom was set. Thanks for the report
to Joakim Verona <joakim AT verona.se>.
0.49.4 [unstable branch] Wed 1 Jan 2003, joern
Features:
- WAV generation of the selected audio track. You find a
correspondent entry in the "Operate" menu. The file is
created in the project's avi/ directory. Requested by
Thibaut Cousin <cousin AT in2p3.fr> and Marc Dirix
<dirixmjm AT home.nl>. Thanks to Tillmann Bitterberg
<transcode AT tibit.org>, who posted the shortest transcode
command for this ;)
- Percentage log messages of previous dvd::rip versions are
back again (disappeared accidentally some versions ago).
Requested by Fred Beondo <bl8206 AT mindspring.com>.
Bugfixes:
- Fixed a typo on the transcode tab. Thanks to Jochen Puchalla
<mail AT puchalla-online.de>.
- Spaces in directories / filenames (project base directory,
vob/avi/tmp etc.) are not allowed, because they make problems
with transcode and other tools. Thanks to David Legg
<david_legg AT tiscali.co.uk>.
- Changing the project name resp. project path after reading TOC
isn't possible anymore, because this confuses dvd::rp, which
can't find the files anymore. Thanks to Fabio Russo.
- Closing a new project after reading TOC didn't open a save
file dialog (because after TOC reading the project is saved
to tmp/backup.rip already).
- Cluster mode: dvdrip-master ignored configured nodes as long
as no project ever was added to the cluster. Thanks for some
hard investigation work to Wolfgang Schricker <wols AT wols.org>.
- Added a fail safe check in file conversion.
0.49.3 [unstable branch] Sun 29 Dec 2002, joern
Bugfixes:
- File conversion didn't work for all older files, due to a bug
in the version comparison routine.
0.49.2 [unstable branch] Sun 29 Dec 2002, joern
Notes:
- File format changed and isn't backward compatible. Old project
files are autoconverted, but older dvd::rip versions can't open
files saved with this version.
- dvd::rip insists on transcode 0.6.2 from now on.
Features:
- Major internal code cleanup, hopefully without introducing too
many bugs.
- Added OGG/Vorbis video bitrate optimization. First all audio
tracks are transcoded, after that the real audio size is known
so the video bitrate can be adjusted accordingly. Correspondent
messages appear in the log. This works in standard and cluster
mode. Thanks to Moritz Bunkus, Markus Liebl and xercist for
suggestions and discussion.
- PCM passthrough (for AVI only). Requested long time ago by
Jamie Manley <jamie AT homebrewcomputing.com> and xercist.
- Support for transcode's smartdeinter deinterlacing filter. This
switches off YUV mode, because this filter supports only RGB
(it's rather slow but has good quality). Requested by Christian
Lambert, Florin Andrei and others.
- Slightly cluster mode optimization: master node's state is never
'offline' or 'unknown', and the node isn't fping'ed anymore.
Bugfixes:
- Adjusted (S)VCD bitrate overhead calculation (mpeg2enc's -B
parameter) to audio + 2% of overall stream (was 1%), because
1% seems to be underestimated in general.
- (S)VCD disc size calculation didn't consider the per disc
overhead of 600 sectors. Again thanks to Julio Sánchez.
- Vorbis sample rate conversion didn't work.
- transcoding to OGG without audio didn't work. Thanks for the
report to Clint Silvester <clint AT focuscompanies.com>
- Volume scanning of PCM audio tracks didn't work.
- Cluster mode: additional audio tracks with OGG didn't work.
0.49.1 [unstable branch] Fri 27 Dec 2002, joern
Notes:
- File format changed and isn't backward compatible. Old project
files are autoconverted, but older dvd::rip versions can't open
files saved with this version.
Bugfixes:
- All changes from 0.48.0 - 0.48.6 are included in this release
(refer to the corresponding Changes entries for details)
- Cluster mode: fixed missing progress information for merge
jobs. Thanks for the fix to Fabio Russo.
Features:
- Applied a patch from Stefan Gmeiner <riddlebox AT freesurf.ch>,
which adds the ability of estimating the image size before
burning on the fly, which is needed for some drives (e.g.
TEAC).
- Partially applied a patch from Petros Stavrakakis
<petros AT stavrakakis.de> which brings more detailed options
for cdrdao, in particular you can select the cdrdao-driver
and buffersize.
- On the transcode tab a new setting "Container format" was added,
currently with three options: AVI, OGG, (S)VCD. This way you
explicitely decide a container format first, the GUI follows
this decision and enables/disables all other options accordingly.
If actual settings can't be done with a selected container
these will be set to reasonably defaults, with correspondent
messages in the log.
- mp3/ac3 audio codecs now supported also for OGG container. You
need at least ogmtools v0.960 (I tested with v0.970).
- Preliminary support for vorbis quality based encoding. Future
versions will determine real audio size after encoding the
1st pass (when using 2pass transcoding) and will adjust
video bitrate accordingly for the 2nd pass.
- Option to change the audio samplerate (be careful with odd
values here, transcode resp. lame bails out for ununsal
samplerates - 48000, 44100 and 24000 always worked for me).
Requested long time ago by Certron DiSoni.
- A new window "Bitrate calculation details" shows all steps of
the video bitrate calculation, so you can see exactly what
happens here. The window can stay open all the time. Its
calculation sheet follows your settings immediately.
- Bitrate calculation now considers selected chapters correctly.
- A new checkbox "manual video bitrate" let you decide explicetly,
if you want dvd::rip to calculate the video bitrate for you,
or not. By default, it's disabled and the video bitrate entry
not sensible. If you enable the "manual" checkbox, dvd::rip
doesn't touch your setting, even if you change the target size,
disc count popup etc.
- Adjusted CD size presets to standard values: 650,703,800,870
(which are 74, 80, 90, 99 minute CD-R with 2048 bytes sector
size. 2324 byte sector size for VCD is now considered, see
below). Thanks to Julio Sánchez <j.sanchezf AT terra.es>.
- (S)VCD sector sizes are considered for SVCD video bitrate
calculation, so you can select a CD size from the popup and
need not to fiddle with SVCD space on your own. This maybe
somewhat confusing on the one hand (because the resulting size is
magically bigger than your setting), but on the other hand
the CD-ROM disc sizes are well-known. And you still can enter
arbitrary MB values by hand, so I decided to leave the MB based
size definition (beside a CD-R duration / minute based one).
Thanks to Julio Sánchez who enlighted several details of the
(S)VCD specification, which were new to me.
- Some further SVCD improvements, e.g. min-gop-size and max-gop-size
values depending on PAL/NTSC are set. Thanks a lot for the
(S)VCD help to Tom Vijlbrief <tom.vijlbrief AT ision.nl>
- AVI/OGG/MPEG container overhead is now considered for video
bitrate calculation. Thanks to Markus Liebl for some tests
and hints regarding measuring the overhead values, and Moritz
Bunkus for information about OGG overhead.
- Dropped the "YUV internally" setting from the GUI, it's always
enabled.
0.48.8 [stable branch] Mon 06 Jan 2003, joern
Bugfixes:
- Clip & Zoom: width and height of zoom/clip2 stages didn't
update correctly if no zoom was set. Thanks for the report
to Joakim Verona <joakim AT verona.se>.
0.48.7 [stable branch] Mon 06 Jan 2003, joern
Bugfixes:
- CD size wasn't set in (S)VCD transcode command. Reported
by Markus Dewerny <dewerny AT web.de> and Dirk Aust
<dirk_aust AT gmx.de>.
0.48.6 [stable branch] Fri 13 Dec 2002, joern
Bugfixes:
- Fixed a typo in the vcdimager command (which didn't affect
proper operation on my system, but it was anyway a typo ;)
Thanks for report and fix to Tom Vijlbrief <tom.vijlbrief
AT ision.nl>
- Using "Create vobsub now" threw an exception due to a missing
avi directory. Thanks to Eckehardt Luhm <bselu AT web.de>.
0.48.5 [stable branch] Sat 7 Dec 2002, joern
Bugfix:
- 0.48.3 introduced a bug which prevents multiple audio
tracks with OGG/Vorbis. Thanks to Lethal Weapon for
the report.
0.48.4 [stable branch] Wed 4 Dec 2002, joern
Bugfix:
- Fixed a dumb bug, where dvd::rip complained about a missing
avi directory when transcoding a title the first time.
Thanks for the report to Florin Andrei (I'm wondering why
nobody found this bug earlier - it should exist since version
0.47.5 - anyway, now it's fixed ;)
0.48.3 [stable branch] Tue 3 Dec 2002, joern
Features:
- dvd::rip now checks on startup if you're using Perl 5.8
without having PERLIO=stdio set. If yes, dvd::rip sets
the variable for you and restarts. (This bug is already
reported to the Perl developers and hopefully fixed
soon, so dvd::rip can drop this workaround somedays).
Bugfixes:
- Adding additional audio tracks didn't work for DVD image
and on-the-fly transcoding. Reported by Matthias Hennemann
<Matthias.Hennemann AT Organik.Uni-Erlangen.DE>
- Free diskspace wasn't printed before ripping. Reported
by Florin Andrei.
- Fixed a possible bug regarding proper ac3 audio codec
detection which probably depends on the used libdvdread
version. Thanks to Ronny Buchmann <ronny-transcode AT
vlugnet.org> who reported a bug in dvd::rip's automatic file
conversion, which is most likely a consequence of an
failed ac3 detection.
0.48.2 [stable branch] Sun 24 Nov 2002, joern
Bugfix:
- transcode 0.6.2 changed its progress output for transcoding
frames ranges. dvd::rip didn't show a valid progress bar
due to that. Thanks for the report to Florin Andrei.
0.48.1 [stable branch] Sat 23 Nov 2002, joern
Note:
- transcode 0.6.2 was released on 22. November. dvd::rip
works with all 0.6 releases, but 0.6.2 is recommended.
dvd::rip disables some features for smaller versions.
Features:
- Added 64 kbit/s audio bitrate preset entry. Suggested by
Miguel J. Jimenez <cactus_espinado AT yahoo.es>
- ffmpeg video codec setting adjusted to the new ffmpeg
interface of transcode 0.6.2. Thanks for the hint to
Stefano <stefano AT symbola.it>
- subtitleripper version is now checked, a correspondent
note is printed, if a version smaller than 0.3 is detected.
Arne Driescher build a transcode independent tarball
of this release, which you can get from Sourceforge:
http://sourceforge.net/projects/subtitleripper
Bugfixes:
- Burning tab: label information followed file selection only
on the GUI, but old values were used internally.
- IFO file copying didn't work for DVD image projects. Thanks
for the report to Arne Driescher.
- thranduil <thranduil AT free.fr> reported that dvd::rip's
vcdimager command works only with long options. I can't
reproduce this, but I switched over to the long options,
just to be sure.
0.48.0 [stable branch] Sun 17 Nov 2002, joern
Notes:
- transcode 0.6.2.20021114 is the recommended version for
this release. 0.6.0 and 0.6.1 still work, but dvd::rip
lacks features with them, e.g. subtitle support.
- From 0.47.6 on dvd::rip needs to know the mount point of your
DVD device. So open the preferences dialog and enter your
mount point there. Also the DVD must be mountable by the
user who executes dvd::rip.
- File format changed slightly with 0.47.2, but is backward
compatible. dvd::rip prints a short message when converting
an older file to the new format.
- Version numbering changes with this release. It follows
the common MAJOR.MINOR.PATCH scheme. Two branches are
distuingished using the MINOR number: the stable branch
uses even numbers, the unstable odd. So the next stable
release is 0.50.0, bugfixes on 0.48.0 will be numbered
0.48.1, 0.48.2 etc and the next unstable branch is 0.49.1,
0.49.2 etc.
- Read all change log entries of 0.47 to see what changed
in detail since 0.46.
Bugfixes:
- Fixed a "division by zero" bug on Clip & Zoom tab.
- Subtitles: test transcoding threw an exception, if no
preview images were grabbed. Reported by Andreas Lemke.
0.47.12 Wed 13 Nov 2002, joern
Bugfixes:
- Changing mp2 bitrate threw an exception. Thanks for the report
to Andreas Lemke <andreas.lemke AT epost.de>
- Transcoding failed, if no subtitles were detected. Also
reported by Andreas Lemke.
- Message about wrong transcode version on the subtitle tab
was too big, the project window needed to grow for it.
0.47.11 Tue 12 Nov 2002, joern
Note:
- Actual transcode pre-0.6.2 snapshots have a bug in cluster
mode, which destroys A/V sync, while transcode 0.6.1 works
fine. The next transcode snapshot should fix that issue.
Until that happens I suggest using 0.6.1 for cluster
operation.
Features:
- Reorganized the video options widgets on the transcode tab
a bit. Makes more sense now, in my opinion.
- Menu entry "Operate/Create dvdrip-info file" (dvdrip-info
file is by default created when you start transcoding).
- Information about subtitles added to the dvdrip-info file.
Bugfixes:
- The subtitle grabbing frame/timecode entry rejected
timecode values.
- Autoadjust presets failed, when the movie had unusual
frame sizes (mostly this happened, if the preview frame
was a bad choice, e.g. it's mostly black. Then letterbox
detection didn't work properly and dvd::rip's autoadjust
mechanism bailed out).
- Subtitle sort order in selection popup was alphanumeric.
- Subtitle preview grabbing still didn't work if the
selection popup wasn't touched after ripping.
- Pressing the "Scan volume" button did nothing if the
title wasn't ripped, instead of telling the user, *that*
the title isn't ripped ;) Thanks for the report to
Chris Jensen <chris AT drspirograph.com>.
- Cluster mode:
- Nodes stopped by hand, didn't get online anymore
after starting them again.
- Nodes' "stopped" state wasn't restored properly in
case of a dvdrip-master restart.
0.47.10 Wed 06 Nov 2002, joern
Features:
- DVD mounting only for copying the IFO files, not for TOC
reading and ripping. Because the mount may make problems
(if your system isn't configured properly), this reduces
the harm a bit, because only the IFO files will be missing.
This affects vobsub subtitle generation only, everything
else will work as usual.
Bugfixes:
- IFO file copying didn't work, if the DVD wasn't mounted
already.
- Fractional volume rescale values were rejected. Thanks for
the report to Laurent Grawet.
0.47.9 Fri 01 Nov 2002, joern
Bugfixes:
- Spaces in the frame range entries produced illegal transcode
options. Reported by Andrea Carpani <ancarpan AT tiscalinet.it>.
- All entry fields are now syntax checked (e.g. non-digits
are rejected when a number is expected).
- When ripping multiple titles or chapters, dvd::rip calculated
6 GB x (number of titles/chapters) as the assumed disk space,
instead of assuming 6 GB once. Reported by Michel Alexandre
Salim.
- Cancelling a rip after a disk usage warning didn't set
the ripping GUI sensitive again.
- Cluster mode: switch node state from offline to online after
a 20 second delay (a booting machine answeres ping requests
some time before the ssh daemon is up - this way the system
has 20 seconds to start the ssh daemon after starting the
network; this should suffice). Requested by Matthias Kukuk
<m.kukuk AT gmx.de>
- AC3 audio tab was always active, even if the selected audio
channel was no AC3.
- Ripping didn't work, when the DVD wasn't mounted by the user
before.
0.47.8 Wed 30 Oct 2002, joern
Bugfixes:
- Fixed a typo which breaks subtitle transcoding. Thanks to
Paul Gohn <pgohn AT nexgo.de> for the report and
William Hawkins <whawkins AT vt.edu> for the fix.
0.47.7 Tue 29 Oct 2002, joern
Features:
- Added another RPM spec file RedHat-Rawhide-Video-DVDRip.spec.
Sorry for my ignorance, but I don't understand anything of
RPM spec files and don't why or whether they are really distro
specific or not. I just add them, if I get them. This one
was sent by Ragnar Kjørstad <dvdrip AT ragnark.vestdata.no>.
Thanks.
Bugfixes:
- The "dvd mount point" check in the preferences dialog didn't
work reliably with all distributions, so I dropped it (resp.
the existence of the mount point is checked only). Thanks
to Douglas Bollinger for the report.
- dvd::rip now checks the mount state of the DVD reliably
and really mounts the DVD only, if it isn't mounted yet
(considering automounters, which were problematic). Thanks
to Davide Ferrari for the bug report.
0.47.6 Mon 28 Oct 2002, joern
Notes:
- From now on dvd::rip needs to know the mount point of your
DVD device. So open the preferences dialog and enter your
mount point there. Also the DVD must be mountable by the
user who executes dvd::rip.
- To get vobsub support you must re-read the TOC from your DVD.
(which nukes your settings of the project - sorry, but it's
a beta release).
Features:
- Subtitles: dvd::rip now creates vobsub files, which can be
played with mplayer, using Arne Driescher's subtitle2vobsub.
Splitting is considered, you get one vobsub per splitted file.
You can create the vobsub by pressing the appropriate button
on the Subtitle tab, or by checking "Create later after
transcoding". Chapter mode isn't supported. Cluster mode support
will follow (you can start vobsub creation from dvd::rip's
Operate menu after transcoding with the cluster). A .rar file is
created, if rar is present on your system. You need a recent
mplayer (I use 0.90pre9) to play rar-vobsub files. Attention:
your rar binary *must not* be newer than 2.x (3.x isn't
supported by mplayer; I use rar 2.71 with success here).
It's hard to find such an old version, so you can grab it
from here: http://www.exit1.org/dvdrip/contrib/rarlnx271.sfx.bin
Thanks to Arne for the hint about rar-vobsub and again for
his great subtitleripper package. You can play a vobsub with
these mplayer options:
mplayer -vobsub movie-001-sid02 movie-001.avi
(In this example the vosub file(s) are "movie-001-sid02.rar"
resp. "movie-001-sid02.{ifo,sub,idx}")
- IFO files: dvd::rip copies the .ifo files into the project's
tmp/ifo directory when reading the TOC.
- Disc size popup became a combo box, so you can enter arbitrary
disc sizes (for customized splitting, e.g. if you want to
leave space for other stuff, you want to put on the CD's).
- dvd::rip prints a warning message if you use RH 8.0 without
the PERLIO=stdio environment variable set. Requested by
Michael Mason <mgm AT eskimoman.net>. NEEDS TESTING, please
report to dvdrip-user, whether this works!
Bugfixes:
- transcode supports rendering subtitles only with -x vob, that
means I had to switch off rendering support for on-the-fly
and dvd-image-ripping. Creating vobsub's work for all modes.
- Subtitle grabbing didn't work for titles which have only one
subtitle, or if you never explicetely selected a subtitle from
the popup. You must re-read the TOC for the fix to take effect.
Thanks to Michèl Alexandre Salim for the extensive bug report.
- When ripping on-thy-fly or from an DVD image, the "Rip" button
is disabled instead of alter it to a "Volume scan" button.
Volume scanning can be done on the Transcode tab, so this function
is rather confusing on the Rip tab.
- When zoom width/height were empty, dvd::rip produced illegal
fast resizing transcode options.
- CD burning: list of files was refreshed when entering the
transcode tab instead of the burn tab.
- dvd::rip crashed on first startup, when no ~/.dvdriprc file
was present. Thanks to Davide Ferarri for the detailed report.
0.47.5 Wed 16 Oct 2002, joern
Features:
- Extensive support for rendering subtitles on the movie
(creating vobsub files is prepared, not yet implemented
but coming soon). Subtitle stuff is on its own tab, documentation
will follow. You need at least transcode 0.6.2.20021010 for this
to work. For existent projects you must re-read the DVD TOC,
because subtitle-detection is done here. Also you need a recent
CVS version of subtitle2pgm from Arne Driescher's subtitleripper
package. You can find it on his project homepage:
http://subtitleripper.sourceforge.net/
If you're unfamilar with CVS: I put a snapshot together of the
version I'm currently using. You can find it here:
http://www.exit1.org/dvdrip/contrib/subtitleripper-20021015.tgz
Thanks a lot to Arne, who added some features on my request
to make it work seamlessly with dvd::rip.
dvd::rip's subtitle support isn't finished yet, a few things
could be improved, e.g. the suggestion functions should be
capable of addding black bars in the clip1 stage or addding black
bars in clip2 for 4:3 movies etc. Stay tuned.
- When transcoding a .dvdrip-info file is generated, which
contains some interesting technical information about the
created movie file. Thanks to Moritz Bunkus for this
suggestion.
- Use a notebook for the different audio codecs supported by
dvd::rip, instead of struggling around with making widgets
sensitive when possible. This makes things much clearer and
is more flexible, because audio options can differ much more,
depending on the selected codec. Also pages of codecs, which
aren't supported with the current settings, are hided instead
of making them unsensitive.
- DVD audio popup now shows "=> skip" for audio tracks, which
are not selected for transcoding. I had some reports of users
regarding wrong transcoded audio channels, but in fact they
missed activating the desired audio track correctly. I hope
such misunderstandings don't happen anymore now.
- Status bar shows free disk space, when idle.
- Free disk space is checked before starting a job which
needs some. dvd::rip currently doesn't know in advance
how much space a ripped title will need. As a thumb rule
dvd::rip warns if less than 6GB are available. Space
checking applies to standard mode only, not cluster mode.
- After an intensive mailing list discussion about the correct
file extension for OGG files containing video tracks
(.ogg vs .ogm), I yielded to Roland Seuhs arguments and
decided that .ogm is now the default file extension for OGG
files. You can change this in the preference dialog, if you
prefer .ogg (or an arbitrary different file extension...)
- CD burning / cdrdao command: if the configured cdrdao command
contains the 'write' option already, dvd::rip doesn't add
it again. This way you can provide specific cdrdao options.
(cdrdao expects 'write' as the first parameter). Thanks
to Christian Herrmann <paras.rasmatazz AT t-online.de> for
the hint
- Added a rpmspecs/ folder in the distribution, which currently
contains RPM spec files for SuSE 8.0 and RedHat 8.0. I doesn't
maintain all of these files personally, e.g. version numbers
may be outdated or something like that. But I hope they are
useful anyway. Thanks to Michèl Alexandre Salim <salimma1
AT yahoo.co.uk>, who provided the RedHat and to Rainer Lay
Lay for the SuSE file.
Bugfixes:
- Clip&Zoom video preview command did not appear in the
logfile. Thanks to Michael Bushey for the report.
- Not enough: Clip&Zoom video preview didn't even work from
ripped VOB's. Same report by Michael Bushey.
- Add. transcode options weren't passed through when
transcoding audio for multiple audio tracks (e.g. -D to
correct A/V sync mismatch). Thanks to Clint Silvester
<clint AT focuscompanies.com> for his report.
- Clipping didn't work if clip entries were empty (which
should be interpreted as 0 instead). Reported by Michael
Bushey.
- Audio size calculation on transcode tab wasn't correct
(calculated base 1024 instead 1000), but the correct value
was used for video bitrate calculation.
- When changing from mp3 to vorbis dvd::rip automatically
choose vorbis for additional tracks on the GUI, but this
wasn't stored internally, so generated transcode commands
still had mp3 options. Reported by edaniel <edaniel AT
perso.mine.nu>.
- Titles with no target audio track threw an exception in
cluster mode. As long as the cluster doesn't support this,
dvd::rip prevents adding such a title to a cluster. Reported
by Rainer Lay.
0.47.4 Sun 6 Oct 2002, joern
Bugfixes:
- On the fly CD burning didn't work (fortunately without
destroying the CD...).
- Updated RPM spec file which now considers pstree for
standard mode.
0.47.3 Sun 6 Oct 2002, joern
Notes:
- dvd::rip now generally depends on 'pstree' not only in
cluster mode
- Red Hat 8.0's Perl distribution has a bug regarding
pipes using non-blocking I/O. dvd::rip doesn *not* work
with RH 8.0 due to this. Refer to the news entry 2002/10/06
on http://www.exit1.org/dvdrip/ for details.
Features:
- Simple CD burning facility. Supports ISO, VCD2 and SVCD
types. Needs mkisofs, cdrecord for ISO operation and
vcdimager, cdrdao for (S)VCD operation.
All commands can and must be configured in the global
preferences. cdrecord and cdrdao must be able to operate
as a normal user resp. the user who executes dvd::rip.
cdrecord must either be set-uid-root or executed through
xcdrwrap from an existent xcdroast installation. cdrdao
must be set-uid-root or the CD burner device file must
be writable by the user who executes dvd::rip.
Warning: currently *no* special checking beside existence
of the needed tools is done, so use this on your own risk.
Try burning in "test mode" first. I tested this with
* cdrecord 1.11a31
* cdrdao 1.1.5
* mkisofs 1.15a29
* vcdimager 0.7.12
and don't know if other versions work, too.
- Debugging window shows CD burning commands for the selected
file entries.
- Global preferences now splitted into several pages of
a notebook widget. Added a simple checking of the specified
values, e.g. if the DVD device and default project directory
are writable, or if specified tools exist.
- New preference: ogg file extension. Suggested by Moritz Bunkus.
dvd::rip defauls to '.ogg', but you can switch to '.ogm' or
arbitrary extensions, if this makes using the files more
comfortable for you.
- Added a rpm spec file Video-DVDRip.spec, so you can simply
build a .rpm archive from the .tar.gz using
> rpm -ta Video-DVDRip-0.XX.tar.gz
Thanks to Rainer Ley for the spec file template.
- Button "Nuke log file" on logging tab, which resets the
log file.
- dvd::rip now opens the preferences dialog, if no ~/.dvdriprc
is found resp. on first startup.
Bugfixes:
- PSU core setting was ignored when adding add. audio-tracks,
reported by Lethal Weapon <lethalwp AT tiscali.be>
- Window title was not cleared, if a project was closed,
reported by Fabio Russo
0.47.2 Mon 30 Sep 2002, joern
Note:
- File format changed slightly, but is backward compatible.
dvd::rip prints a short message when converting an older
file to the new format.
Features:
- Experimental OGG/Vorbis audio support. If you choose
Vorbis as an audio codec, the result will be a .ogm
file with DivX/Xvid/whatever video and Vorbis audio
(so this implicetely switches the resulting file container
format from AVI to OGG - which will become an explicite
option, once OGG support is more complete).
Splitting is supported. Cluster mode support available only
for movies with one PSU. Movies with more than one PSU will be
supported when ogmtools provide a program for concatenating
OGG streams. Multiple audio tracks are supported, but you
currently can't mix mp3/ac3/vorbis codecs for the same title.
(mp3/ac3 is supported by ogmtools, but without A/V sync).
You need ogmtools 0.950 and transcode 0.6.1 for the whole
thing to work. You can get ogmtools here:
http://www.bunkus.org/videotools/ogmtools/index.html
Thanks to Moritz Bunkus for writing ogmtools and answering
my questions.
- when opening a project file, dvd::rip now selects
automatically the tab which was selected when the file
was saved.
- new dvdrip command line options "-f {transcode|transcode_split}"
and "-t title-nr" to select a title of a given project file
on startup and transcode (and optionally split) it.
dvd::rip exits after finishing, so this can be used for
simple batch transcoding a bunch of projects/titles, if
cluster mode is no option for you (e.g. in case of NTSC movies).
Thanks to Rainer Lay for his suggestion.
Example: dvdrip -t 1 -f transcode_split movie.rip
Bugfixes:
- Cluster mode: if a frame range was set, dvdrip-master
crashed with a fatal error (transcoding a frame range
is still not supported with cluster mode, but really no
need for dvdrip-master to crash here... ;)
0.47.1 Sun 29 Sep 2002, joern
Bugfixes:
- Progress information was messed up when transcoding
chapters from a DVD image or when doing direct DVD
transcoding. Because dvd::rip can't know the chapter
length in advance in this case, now no progress information
is printed (no percent/eta), only fps and elapsed time.
Thanks to David Rosky <d_rosky AT nccn.net> for his
detailed bug report.
- Chapter mode: ripping progress is related to the length
of the title, what is confusing if not all chapters are
selected. For single chapter ripping now no percent/eta
progress is printed anymore. Reported by David Rosky.
- Cluster mode: node test didn't work (stalled). Thanks for
the report to Fabio Russo <f.russo AT anthesia.it>.
----------------------------------------------------------------------
-- For older releases please refer to Changes.0.46. --
----------------------------------------------------------------------