 NAME
 SYNOPSIS
 DESCRIPTION
 FUNCTIONS
 GENERAL CHARACTERISTICS
 FORMULAS
 SUBCLASSING
 SEE ALSO
 HOME PAGE
 LICENSE
NAME
Math::PlanePath  points on a path through the 2D plane
SYNOPSIS
use Math::PlanePath;
# only a base class, see the subclasses for actual operation
DESCRIPTION
This is a base class for some mathematical paths which map an integer position $n
to and from coordinates $x,$y
in the 2D plane.
The current classes include the following. The intention is that any Math::PlanePath::Something
is a PlanePath, and supporting base classes or related things are further down like Math::PlanePath::Base::Xyzzy
.
SquareSpiral foursided spiral
PyramidSpiral square base pyramid
TriangleSpiral equilateral triangle spiral
TriangleSpiralSkewed equilateral skewed for compactness
DiamondSpiral foursided spiral, looping faster
PentSpiral fivesided spiral
PentSpiralSkewed fivesided spiral, compact
HexSpiral sixsided spiral
HexSpiralSkewed sixsided spiral skewed for compactness
HeptSpiralSkewed sevensided spiral, compact
AnvilSpiral anvil shape
OctagramSpiral eight pointed star
KnightSpiral an infinite knight's tour
CretanLabyrinth 7circuit extended infinitely
SquareArms fourarm square spiral
DiamondArms fourarm diamond spiral
AztecDiamondRings foursided rings
HexArms sixarm hexagonal spiral
GreekKeySpiral square spiral with Greek key motif
MPeaks "M" shape layers
SacksSpiral quadratic on an Archimedean spiral
VogelFloret seeds in a sunflower
TheodorusSpiral unit steps at right angles
ArchimedeanChords unit chords on an Archimedean spiral
MultipleRings concentric circles
PixelRings concentric rings of midpoint pixels
FilledRings concentric rings of pixels
Hypot points by distance
HypotOctant first octant points by distance
TriangularHypot points by triangular distance
PythagoreanTree X^2+Y^2=Z^2 by trees
PeanoCurve 3x3 selfsimilar quadrant
PeanoDiagonals across unit squares
WunderlichSerpentine transpose parts of PeanoCurve
HilbertCurve 2x2 selfsimilar quadrant
HilbertSides along sides of unit squares
HilbertSpiral 2x2 selfsimilar wholeplane
ZOrderCurve replicating Z shapes
GrayCode Gray code splits
WunderlichMeander 3x3 "R" pattern quadrant
BetaOmega 2x2 selfsimilar halfplane
AR2W2Curve 2x2 selfsimilar of four parts
KochelCurve 3x3 selfsimilar of two parts
DekkingCurve 5x5 selfsimilar, edges
DekkingCentres 5x5 selfsimilar, centres
CincoCurve 5x5 selfsimilar
ImaginaryBase replicate in four directions
ImaginaryHalf halfplane replicate three directions
CubicBase replicate in three directions
SquareReplicate 3x3 replicating squares
CornerReplicate 2x2 replicating "U"
LTiling selfsimilar L shapes
DigitGroups digits grouped by zeros
FibonacciWordFractal turns by Fibonacci word bits
Flowsnake selfsimilar hexagonal tile traversal
FlowsnakeCentres likewise but centres of hexagons
GosperReplicate selfsimilar hexagonal tiling
GosperIslands concentric island rings
GosperSide single side or radial
QuintetCurve selfsimilar "+" traversal
QuintetCentres likewise but centres of squares
QuintetReplicate selfsimilar "+" tiling
DragonCurve paper folding
DragonRounded paper folding rounded corners
DragonMidpoint paper folding segment midpoints
AlternatePaper alternating direction folding
AlternatePaperMidpoint alternating direction folding, midpoints
TerdragonCurve ternary dragon
TerdragonRounded ternary dragon rounded corners
TerdragonMidpoint ternary dragon segment midpoints
AlternateTerdragon alternate ternary dragon
R5DragonCurve radix5 dragon curve
R5DragonMidpoint radix5 dragon curve midpoints
CCurve "C" curve
ComplexPlus base i+realpart
ComplexMinus base irealpart, including twindragon
ComplexRevolving revolving base i+1
SierpinskiCurve selfsimilar righttriangles
SierpinskiCurveStair selfsimilar righttriangles, stairstep
HIndexing selfsimilar righttriangles, squared up
KochCurve replicating triangular notches
KochPeaks two replicating notches
KochSnowflakes concentric notched 3sided rings
KochSquareflakes concentric notched 4sided rings
QuadricCurve eight segment zigzag
QuadricIslands rings of those zigzags
SierpinskiTriangle selfsimilar triangle by rows
SierpinskiArrowhead selfsimilar triangle connectedly
SierpinskiArrowheadCentres likewise but centres of triangles
Rows fixedwidth rows
Columns fixedheight columns
Diagonals diagonals between X and Y axes
DiagonalsAlternating diagonals Y to X and back again
DiagonalsOctant diagonals between Y axis and X=Y centre
Staircase stairs down from the Y to X axes
StaircaseAlternating stairs Y to X and back again
Corner expanding stripes around a corner
CornerAlternating expanding up and down around a corner
PyramidRows expanding stacked rows pyramid
PyramidSides along the sides of a 45degree pyramid
CellularRule cellular automaton by rule number
CellularRule54 cellular automaton rows pattern
CellularRule57 cellular automaton (rule 99 mirror too)
CellularRule190 cellular automaton (rule 246 mirror too)
UlamWarburton cellular automaton diamonds
UlamWarburtonQuarter cellular automaton quarterplane
DiagonalRationals rationals X/Y by diagonals
FactorRationals rationals X/Y by prime factorization
GcdRationals rationals X/Y by rows with GCD integer
RationalsTree rationals X/Y by tree
FractionsTree fractions 0<X/Y<1 by tree
ChanTree rationals X/Y multichild tree
CfracDigits continued fraction 0<X/Y<1 by digits
CoprimeColumns coprime X,Y
DivisibleColumns X divisible by Y
WythoffArray Fibonacci recurrences
WythoffPreliminaryTriangle
PowerArray powers in rows
File points from a disk file
And in the separate MathPlanePathToothpick distribution
ToothpickTree pattern of toothpicks
ToothpickReplicate same by replication rather than tree
ToothpickUpist toothpicks only growing upwards
ToothpickSpiral toothpicks around the origin
LCornerTree Lshape corner growth
LCornerReplicate same by replication rather than tree
OneOfEight
HTree H shapes replicated
The paths are object oriented to allow parameters, though many have none. See examples/numbers.pl
in the MathPlanePath sources for a sample printout of numbers from selected paths or all paths.
Number Types
The $n
and $x,$y
parameters can be either integers or floating point. The paths are meant to do something sensible with fractions but expect roundoff for big floating point exponents.
Floating point infinities (when available) give NaN or infinite returns of some kind (some unspecified kind as yet). n_to_xy()
on negative infinity is an empty return the same as other negative $n
.
Floating point NaNs (when available) give NaN, infinite, or empty/undef returns, but again of some unspecified kind as yet.
Most of the classes can operate on overloaded number types as inputs and give corresponding outputs.
Math::BigInt maybe perl 5.8 up for ** operator
Math::BigRat
Math::BigFloat
Number::Fraction 1.14 or higher for abs()
A few classes might truncate a bignum or a fraction to a float as yet. In general the intention is to make the calculations generic enough to act on any sensible number type. Recent enough versions of the bignum modules might be required, perhaps BigInt
of Perl 5.8 or higher for **
exponentiation operator.
For reference, an undef
input as $n
, $x
, $y
, etc, is designed to provoke an uninitialized value warning when warnings are enabled. Perhaps that will change, but the warning at least prevents bad inputs going unnoticed.
FUNCTIONS
In the following Foo
is one of the various subclasses, see the list above and under "SEE ALSO".
Constructor
$path = Math::PlanePath::Foo>new (key=>value, ...)

Create and return a new path object. Optional key/value parameters may control aspects of the object.
Coordinate Methods
($x,$y) = $path>n_to_xy ($n)

Return X,Y coordinates of point
$n
on the path. If there's no point$n
then the return is an empty list. For examplemy ($x,$y) = $path>n_to_xy (123) or next; # no negatives in $path
Paths start from
$path>n_start()
below, though some will give a position for N=0 or N=0.5 too. ($dx,$dy) = $path>n_to_dxdy ($n)

Return the change in X and Y going from point
$n
to point$n+1
, or for paths with multiple arms from$n
to$n+$arms_count
(thus advancing one point along the arm of$n
).+ $n+1 == $next_x,$next_y ^   $dx = $next_x  $x + $n == $x,$y $dy = $next_y  $y
$n
can be fractional and in that case the dX,dY is from that fractional$n
position to$n+1
(or$n+$arms
).frac $n+1 == $next_x,$next_y v integer *+  /  / / $dx = $next_x  $x frac + $n == $x,$y $dy = $next_y  $y  integer *
In both cases
n_to_dxdy()
is the difference$dx=$next_x$x, $dy=$next_y$y
. Currently for most paths it's merely twon_to_xy()
calls to calculate the two points, but some paths can calculate a dX,dY with a little less work. $rsquared = $path>n_to_radius ($n)
$rsquared = $path>n_to_rsquared ($n)

Return the radial distance R=sqrt(X^2+Y^2) of point
$n
, or the radius squared R^2=X^2+Y^2. If there's no point$n
then the return isundef
.For a few paths, these might be calculated with less work than
n_to_xy()
. For example theSacksSpiral
is simply R^2=N, or theMultipleRings
path with its default step=6 has an integer radius for integer$n
whereas$x,$y
are fractional (and so inexact). $n = $path>xy_to_n ($x,$y)

Return the N point number at coordinates
$x,$y
. If there's nothing at$x,$y
then returnundef
.my $n = $path>xy_to_n(20,20); if (! defined $n) { next; # nothing at this X,Y }
$x
and$y
can be fractional and the path classes will give an integer$n
which contains$x,$y
within a unit square, circle, or intended figure centred on the integer$n
.For paths which completely fill the plane there's always an
$n
to return, but for the spreadout paths an$x,$y
position may fall in between (no$n
close enough) and giveundef
. @n_list = $path>xy_to_n_list ($x,$y)

Return a list of N point numbers at coordinates
$x,$y
. If there's nothing at$x,$y
then return an empty list.my @n_list = $path>xy_to_n(20,20);
Most paths have just a single N for a given X,Y but some such as
DragonCurve
andTerdragonCurve
have multiple N's and this method returns all of them.Currently all paths have a finite number of N at a given location. It's unspecified what might happen for an infinite list, if that ever occurred.
@n_list = $path>n_to_n_list ($n)

Return a list of all N point numbers at the location of
$n
. This is equivalent toxy_to_n_list(n_to_xy($n))
.The return list includes
$n
itself. If there is no$n
in the path then return an empty list.This function is convenient for paths like
DragonCurve
orTerdragonCurve
with double or triple visited points so an N may have other N at the same location. $bool = $path>xy_is_visited ($x,$y)

Return true if
$x,$y
is visited. This is equivalent todefined($path>xy_to_n($x,$y))
Some paths cover the plane and for them
xy_is_visited()
is always true. For others it might be less work to test a point than to calculate its$n
. $n = $path>xyxy_to_n($x1,$y1, $x2,$y2)
$n = $path>xyxy_to_n_either($x1,$y1, $x2,$y2)
@n_list = $path>xyxy_to_n_list($x1,$y1, $x2,$y2)
@n_list = $path>xyxy_to_n_list_either($x1,$y1, $x2,$y2)

Return <$n> which goes from
$x1,$y1
to$x2,$y2
. <$n> is at$x1,$y1
and$n+1
is at$x2,$y2
, or for a multiarm path$n+$arms
, so a step along the same arm. If there's no such$n
then returnundef
.The
either()
forms allow <$n> in either direction, so$x1,$y1
to$x2,$y2
or the other way$x2,$y2
to$x1,$y1
.The
n_list()
forms return a list of all$n
going between$x1,$y1
and$x2,$y2
. For example inMath::PlanePath::CCurve
some segments are traversed twice, once in each direction.The possible N values at each X,Y are determined the same way as for
xy_to_n()
. ($n_lo, $n_hi) = $path>rect_to_n_range ($x1,$y1, $x2,$y2)

Return a range of N values covering the rectangle with corners at
$x1
,$y1
and$x2
,$y2
. The range is inclusive. For example,my ($n_lo, $n_hi) = $path>rect_to_n_range (5,5, 5,5); foreach my $n ($n_lo .. $n_hi) { my ($x, $y) = $path>n_to_xy($n) or next; print "$n $x,$y"; }
The return might be an overestimate of the N range required to cover the rectangle. Even if the range is exact, the nature of the path may mean many points between
$n_lo
and$n_hi
are outside the rectangle. But the range is at least a lower and upper bound on the N values which occur in the rectangle. Classes which guarantee an exact lo/hi say so in their docs.$n_hi
is usually no more than an extra partial row, revolution, or selfsimilar level.$n_lo
might be merely the starting$path>n_start()
, which is fine if the origin is in the desired rectangle but away from the origin could actually start higher.$x1
,$y1
and$x2
,$y2
can be fractional. If they partly overlap some N figures then those N's are included in the return.If there's no points in the rectangle then the return can be a "crossed" range like
$n_lo=1
,$n_hi=0
(which makes aforeach
do no loops). Butrect_to_n_range()
may not always notice there's no points in the rectangle and might instead return an overestimate.
Descriptive Methods
$n = $path>n_start()

Return the first N in the path. The start is usually either 0 or 1 according to what is most natural for the path. Some paths have an
n_start
parameter to control the numbering.Some classes have secret dubious undocumented support for N values below this start (zero or negative), but
n_start()
is the intended starting point. $f = $path>n_frac_discontinuity()

Return the fraction of N at which there may be discontinuities in the path. For example if there's a jump in the coordinates between N=7.4999 and N=7.5 then the returned
$f
is 0.5. Or$f
is 0 if there's a discontinuity between 6.999 and 7.0.If there's no discontinuities in the path then the return is
undef
. That means for example fractions between N=7 to N=8 give smooth continuous X,Y values (of some kind).This is mainly of interest for drawing line segments between N points. If there's discontinuities then the idea is to draw from say N=7.0 to N=7.499 and then another line from N=7.5 to N=8.
$arms = $path>arms_count()

Return the number of arms in a "multiarm" path.
For example in
SquareArms
this is 4 and each arm increments in turn, so the first arm is N=1,5,9,13,etc starting from$path>n_start()
and incrementing by 4 each time. $bool = $path>x_negative()
$bool = $path>y_negative()

Return true if the path extends into negative X coordinates and/or negative Y coordinates respectively.
$bool = Math::PlanePath::Foo>class_x_negative()
$bool = Math::PlanePath::Foo>class_y_negative()
$bool = $path>class_x_negative()
$bool = $path>class_y_negative()

Return true if any paths made by this class extend into negative X coordinates and/or negative Y coordinates, respectively.
For some classes the X or Y extent may depend on parameter values.
$n = $path>x_negative_at_n()
$n = $path>y_negative_at_n()

Return the integer N where X or Y respectively first goes negative, or return
undef
if it does not go negative (x_negative()
ory_negative()
respectively is false). $x = $path>x_minimum()
$y = $path>y_minimum()
$x = $path>x_maximum()
$y = $path>y_maximum()

Return the minimum or maximum of the X or Y coordinate reached by integer N values in the path. If there's no minimum or maximum then return
undef
. $dx = $path>dx_minimum()
$dx = $path>dx_maximum()
$dy = $path>dy_minimum()
$dy = $path>dy_maximum()

Return the minimum or maximum change dX, dY occurring in the path for integer N to N+1. For a multiarm path the change is N to N+arms so it's the change along the same arm.
Various paths which go by rows have nondecreasing Y. For them
dy_minimum()
is 0. $adx = $path>absdx_minimum()
$adx = $path>absdx_maximum()
$ady = $path>absdy_minimum()
$ady = $path>absdy_maximum()

Return the minimum or maximum change abs(dX) or abs(dY) occurring in the path for integer N to N+1. For a multiarm path, the change is N to N+arms so it's the change along the same arm.
absdx_maximum()
is simply max(dXmax,dXmin), the biggest change either positive or negative.absdy_maximum()
similarly.absdx_minimum()
is 0 if dX=0 occurs anywhere in the path, which means any vertical step. If X always changes thenabsdx_minimum()
will be something bigger than 0.absdy_minimum()
likewise 0 if any horizontal dY=0, or bigger if Y always changes. $sum = $path>sumxy_minimum()
$sum = $path>sumxy_maximum()

Return the minimum or maximum values taken by coordinate sum X+Y reached by integer N values in the path. If there's no minimum or maximum then return
undef
.S=X+Y is an antidiagonal. A path which is always right and above some antidiagonal has a minimum. Some paths might be entirely left and below and so have a maximum, though that's unusual.
\ Path always above \  has minimum S=X+Y \ o Path always below \ has maximum S=X+Y  \ \ S=X+Y
$sum = $path>sumabsxy_minimum()
$sum = $path>sumabsxy_maximum()

Return the minimum or maximum values taken by coordinate sum abs(X)+abs(Y) reached by integer N values in the path. A minimum always exists but if there's no maximum then return
undef
.SumAbs=abs(X)+abs(Y) is sometimes called the "taxicab" or "Manhattan" distance, being how far to travel through a squaregrid city to get to X,Y.
sumabsxy_minimum()
is then how close to the origin the path extends.SumAbs can also be interpreted geometrically as numbering the antidiagonals of the quadrant containing X,Y, which is equivalent to asking which diamond shape X,Y falls on.
sumabsxy_minimum()
is then the smallest such diamond reached by the path. /\ SumAbs = which diamond X,Y falls on /  \ /  \ o \  / \  / \/ 
$diffxy = $path>diffxy_minimum()
$diffxy = $path>diffxy_maximum()

Return the minimum or maximum values taken by coordinate difference XY reached by integer N values in the path. If there's no minimum or maximum then return
undef
.D=XY is a leading diagonal. A path which is always right and below such a diagonal has a minimum, for example
HypotOctant
. A path which is always left and above some diagonal has a maximum D=XY. For example various wedgelike paths such asPyramidRows
in its default step=2, and "upper octant" paths have a maximum./ D=XY Path always below  / has maximum D=XY / o / /  Path always above / has minimum D=XY
$absdiffxy = $path>absdiffxy_minimum()
$absdiffxy = $path>absdiffxy_maximum()

Return the minimum or maximum values taken by abs(XY) for integer N in the path. The minimum is 0 or more. If there's maximum then return
undef
.abs(XY) can be interpreted geometrically as the distance away from the X=Y diagonal and measured at rightangles to that line.
d=abs(XY) X=Y line ^ / \ / \/ /\ / \ / \ o v / d=abs(XY)
Paths which visit the X=Y line (or approach it as an infimum) have
absdiffxy_minimum() = 0
. Otherwiseabsdiffxy_minimum()
is how close they come to the line.If the path is entirely below the X=Y line so X>=Y then XY>=0 and
absdiffxy_minimum()
is the same asdiffxy_minimum()
. If the path is entirely below the X=Y line thenabsdiffxy_minimum()
is diffxy_maximum()
. $dsumxy = $path>dsumxy_minimum()
$dsumxy = $path>dsumxy_maximum()
$ddiffxy = $path>ddiffxy_minimum()
$ddiffxy = $path>ddiffxy_maximum()

Return the minimum or maximum change dSum or dDiffXY occurring in the path for integer N to N+1. For a multiarm path, the change is N to N+arms so it's the change along the same arm.
$rsquared = $path>rsquared_minimum()
$rsquared = $path>rsquared_maximum()

Return the minimum or maximum Rsquared = X^2+Y^2 reached by integer N values in the path. If there's no minimum or maximum then return
undef
.Rsquared is always >= 0 so it always has a minimum. The minimum will be more than 0 for paths which don't include the origin X=0,Y=0.
RSquared generally has no maximum since the paths usually extend infinitely in some direction.
rsquared_maximum()
returnsundef
in that case. ($dx,$dy) = $path>dir_minimum_dxdy()
($dx,$dy) = $path>dir_maximum_dxdy()

Return a vector which is the minimum or maximum angle taken by a step integer N to N+1, or for a multiarm path N to N+arms, so it's the change along the same arm. Directions are reckoned anticlockwise around from the X axis.
 * dX=2,dY=2 dX=1,dY=1 *  / \/ +* dX=1,dY=0   * dX=0,dY=1
A path which is always goes N,S,E,W such as the
SquareSpiral
has minimum East dX=1,dY=0 and maximum South dX=0,dY=1.Paths which go diagonally may have different limits. For example the
KnightSpiral
goes in 2x1 steps and so has minimum EastNorthEast dX=2,dY=1 and maximum EastSouthEast dX=2,dY=1.If the path has directions approaching 360 degrees then
dir_maximum_dxdy()
is 0,0 which should be taken to mean a full circle as a supremum. For exampleMultipleRings
.If the path only ever goes East then the maximum is East dX=1,dY=0, and the minimum the same. This isn't particularly interesting, but arises for example in the
Columns
path height=0. $bool = $path>turn_any_left()
$bool = $path>turn_any_right()
$bool = $path>turn_any_straight()

Return true if the path turns left, right, or straight (which includes 180deg reverse) at any integer N.
N+1 left N1  N > N+1 straight N+1 right
A line from N1 to N is a current direction and the turn at N is then whether point N+1 is to the left or right of that line. Directly along the line is straight, and so is anything directly behind as a reverse. This is the turn style of Math::NumSeq::PlanePathTurn.
$str = $path>figure()

Return a string name of the figure (shape) intended to be drawn at each
$n
position. This is currently either"square" side 1 centred on $x,$y "circle" diameter 1 centred on $x,$y
Of course this is only a suggestion since PlanePath doesn't draw anything itself. A figure like a diamond for instance can look good too.
Tree Methods
Some paths are structured like a tree where each N has a parent and possibly some children.
123
/  \
456 999 458
/ / \
1000 1001 1005
The N numbering and any relation to X,Y positions varies among the paths. Some are numbered by rows in breadthfirst style and some have children with X,Y positions adjacent to their parent, but that shouldn't be assumed, only that there's a parentchild relation down from some set of root nodes.
$bool = $path>is_tree()

Return true if
$path
is a tree.The various tree methods have empty or
undef
returns on nontree paths. Often it's enough to check for that from a desired method rather than a separateis_tree()
check. @n_children = $path>tree_n_children($n)

Return a list of N values which are the child nodes of
$n
, or return an empty list if$n
has no children.There could be no children either because
$path
is not a tree or because there's no children at a particular$n
. $num = $path>tree_n_num_children($n)

Return the number of children of
$n
, or 0 if$n
has no children, orundef
if$n < n_start()
(ie. before the start of the path).If the tree is considered as a directed graph then this is the "outdegree" of
$n
. $n_parent = $path>tree_n_parent($n)

Return the parent node of
$n
, orundef
if it has no parent.There is no parent at the root node of the tree, or one of multiple roots, or if
$path
is not a tree. $n_root = $path>tree_n_root ($n)

Return the N which is the root node of
$n
. This is the top of the tree as would be found by followingtree_n_parent()
repeatedly.The return is
undef
if there's no$n
point or if$path
is not a tree. $depth = $path>tree_n_to_depth($n)

Return the depth of node
$n
, orundef
if there's no point$n
. The top of the tree is depth=0, then its children are depth=1, etc.The depth is a count of how many parent, grandparent, etc, levels are above
$n
, ie. until reachingtree_n_to_parent()
returningundef
. For nontree pathstree_n_to_parent()
is alwaysundef
andtree_n_to_depth()
is always 0. $n_lo = $path>tree_depth_to_n($depth)
$n_hi = $path>tree_depth_to_n_end($depth)
($n_lo, $n_hi) = $path>tree_depth_to_n_range ($depth)

Return the first or last N, or both those N, for tree level
$depth
in the path. If there's no such$depth
or if$path
is not a tree then returnundef
, or fortree_depth_to_n_range()
return an empty list.The points
$n_lo
through$n_hi
might not necessarily all be at$depth
. It's possible for depths to be interleaved or intermixed in the point numbering. But many paths are breadthwise successive rows and for them$n_lo
to$n_hi
inclusive is all$depth
.$n_hi
can only exist if the row has a finite number of points. That's true of all current paths, but perhaps allowance ought to be made for$n_hi
asundef
or some such if there is no maximum N for some row. $num = $path>tree_depth_to_width ($depth)

Return the number of points at
$depth
in the tree. If there's no such$depth
or$path
is not a tree then returnundef
. $height = $path>tree_n_to_subheight($n)

Return the height of the subtree starting at
$n
, orundef
if infinite. The height of a tree is the longest distance down to a leaf node. For example,... N subheight \   6 7 8 0 undef \ \ / 1 undef 3 4 5 2 2 \ \ / 3 undef 1 2 4 1 \ / 5 0 0 ...
At N=0 and all of the left side the tree continues infinitely so the subheight there is
undef
for infinite. For N=2 the subheight is 2 because the longest path down is 2 levels (to N=7 or N=8). For a leaf node such as N,=5 the subheight is 0.
Tree Descriptive Methods
$num = $path>tree_num_roots()

Return the number of root nodes in
$path
. If$path
is not a tree then return 0. Many tree paths have a single root and for them the return is 1. @n_list = $path>tree_root_n_list()

Return a list of the N values which are the root nodes in
$path
. If$path
is not a tree then this is an empty list. There aretree_num_roots()
many return values. $num = $path>tree_num_children_minimum()
$num = $path>tree_num_children_maximum()
@nums = $path>tree_num_children_list()

Return the possible number of children of the nodes of
$path
, either the minimum, the maximum, or a list of all possible numbers of children.For
tree_num_children_list()
the list of values is in increasing order, so the first value istree_num_children_minimum()
and the last istree_num_children_maximum()
. $bool = $path>tree_any_leaf()

Return true if there are any leaf nodes in the tree, meaning any N for which
tree_n_num_children()
is 0.This is the same as
tree_num_children_minimum()==0
since if NumChildren=0 occurs then there are leaf nodes.Some trees may have no leaf nodes, for example in the complete binary tree of
RationalsTree
every node always has 2 children.
Level Methods
level = $path>n_to_level($n)

Return the replication level containing
$n
. The first level is 0. ($n_lo,$n_hi) = $path>level_to_n_range($level)

Return the range of N values, inclusive, which comprise a selfsimilar replication level in
$path
. If$path
has no notion of such levels then return an empty list.my ($n_lo, $n_hi) = $path>level_to_n_range(6) or print "no levels in this path";
For example the
DragonCurve
has levels running0
to2**$level
, or theHilbertCurve
is0
to4**$level  1
. Most levels are powers like this. A power2**$level
is a "vertex" style whereas2**$level  1
is a "centre" style. The difference is generally whether the X,Y points represent vertices of the object's segments as opposed to centres or midpoints.
Parameter Methods
$aref = Math::PlanePath::Foo>parameter_info_array()
@list = Math::PlanePath::Foo>parameter_info_list()

Return an arrayref of list describing the parameters taken by a given class. This meant to help making widgets etc for user interaction in a GUI. Each element is a hashref
{ name => parameter key arg for new() share_key => string, or undef description => human readable string type => string "integer","boolean","enum" etc default => value minimum => number, or undef maximum => number, or undef width => integer, suggested display size choices => for enum, an arrayref }
type
is a string, one of"integer" "enum" "boolean" "string" "filename"
"filename" is separate from "string" since it might require subtly different handling to reach Perl as a byte string, whereas a "string" type might in principle take Perl wide chars.
For "enum" the
choices
field is the possible values, such as{ name => "flavour", type => "enum", choices => ["strawberry","chocolate"], }
minimum
and/ormaximum
are omitted if there's no hard limit on the parameter.share_key
is designed to indicate when parameters from differentPlanePath
classes can done by a single control widget in a GUI etc. Normally thename
is enough, but when the same name has slightly different meanings in different classes ashare_key
allows the same meanings to be matched up. $hashref = Math::PlanePath::Foo>parameter_info_hash()

Return a hashref mapping parameter names
$info>{'name'}
to their$info
records.{ wider => { name => "wider", type => "integer", ... }, }
GENERAL CHARACTERISTICS
The classes are mostly based on integer $n
positions and those designed for a square grid turn an integer $n
into integer $x,$y
. Usually they give inbetween positions for fractional $n
too. Classes not on a square grid but instead giving fractional X,Y such as SacksSpiral
and VogelFloret
are designed for a unit circle at each $n
but they too can give inbetween positions on request.
All X,Y positions are calculated by separate n_to_xy()
calls. To follow a path use successive $n
values starting from $path>n_start()
.
foreach my $n ($path>n_start .. 100) {
my ($x,$y) = $path>n_to_xy($n);
print "$n $x,$y\n";
}
The separate n_to_xy()
calls were motivated by plotting just some N points of a path, such as just the primes or the perfect squares. Successive positions in paths could perhaps be done more efficiently in an iterator style. Paths with a quadratic "step" are not much worse than a sqrt()
to break N into a segment and offset, but the selfsimilar paths which chop N into digits of some radix could increment instead of recalculate.
If interested only in a particular rectangle or similar region then iterating has the disadvantage that it may stray outside the target region for a long time, making an iterator much less useful than it seems. For wild paths it can be better to apply xy_to_n()
by rows or similar across the desired region.
Math::NumSeq::PlanePathCoord etc offer the PlanePath coordinates, directions, turns, etc as sequences. The iterator forms there simply make repeated calls to n_to_xy()
etc.
Scaling and Orientation
The paths generally make a first move to the right and go anticlockwise around from the X axis, unless there's some more natural orientation. Anticlockwise is the usual direction for mathematical spirals.
There's no parameters for scaling, offset or reflection as those things are thought better left to a general coordinate transformer, for example to expand or invert for display. Some easy transformations can be had just from the X,Y with
X,Y flip horizontally (mirror image)
X,Y flip vertically (across the X axis)
Y,X rotate +90 degrees (anticlockwise)
Y,X rotate 90 degrees (clockwise)
X,Y rotate 180 degrees
Flip vertically makes spirals go clockwise instead of anticlockwise, or a flip horizontally the same but starting on the left at the negative X axis. See "Triangular Lattice" below for 60 degree rotations of the triangular grid paths too.
The Rows and Columns paths are exceptions to the rule of not having rotated versions of paths. They began as ways to pass in width and height as generic parameters and let the path use the one or the other.
For scaling and shifting see for example Transform::Canvas, and to rotate as well see Geometry::AffineTransform.
Loop Step
The paths can be characterized by how much longer each loop or repetition is than the preceding one. For example each cycle around the SquareSpiral
is 8 more N points than the preceding.
Step Path
 
0 Rows, Columns (fixed widths)
1 Diagonals
2/2 DiagonalsOctant (2 rows for +2)
2 SacksSpiral, Corner, CornerAlternating,
PyramidSides, PyramidRows (default)
4 DiamondSpiral, AztecDiamondRings, Staircase
4/2 CellularRule54, CellularRule57,
DiagonalsAlternating (2 rows for +4)
5 PentSpiral, PentSpiralSkewed
5.65 PixelRings (average about 4*sqrt(2))
6 HexSpiral, HexSpiralSkewed, MPeaks,
MultipleRings (default)
6/2 CellularRule190 (2 rows for +6)
6.28 ArchimedeanChords (approaching 2*pi),
FilledRings (average 2*pi)
7 HeptSpiralSkewed
8 SquareSpiral, PyramidSpiral
16/2 StaircaseAlternating (up and back for +16)
9 TriangleSpiral, TriangleSpiralSkewed
12 AnvilSpiral
16 OctagramSpiral, ToothpickSpiral
19.74 TheodorusSpiral (approaching 2*pi^2)
32/4 KnightSpiral (4 loops 2wide for +32)
64 DiamondArms (each arm)
72 GreekKeySpiral
128 SquareArms (each arm)
128/4 CretanLabyrinth (4 loops for +128)
216 HexArms (each arm)
totient CoprimeColumns, DiagonalRationals
numdivisors DivisibleColumns
various CellularRule
parameter MultipleRings, PyramidRows
The step determines which quadratic number sequences make straight lines. For example the gap between successive perfect squares increases by 2 each time (4 to 9 is +5, 9 to 16 is +7, 16 to 25 is +9, etc), so the perfect squares make a straight line in the paths of step 2.
In general straight lines on stepped paths are quadratics
N = a*k^2 + b*k + c where a=step/2
The polygonal numbers are like this, with the (step+2)gonal numbers making a straight line on a "step" path. For example the 7gonals (heptagonals) are 5/2*k^23/2*k and make a straight line on the step=5 PentSpiral
. Or the 8gonal octagonal numbers 6/2*k^24/2*k on the step=6 HexSpiral
.
There are various interesting properties of primes in quadratic progressions. Some quadratics seem to have more primes than others. For example see "Lucky Numbers of Euler" in Math::PlanePath::PyramidSides. Many quadratics have no primes at all, or none above a certain point, either trivially if always a multiple of 2 etc, or by a more sophisticated reasoning. See "Step 3 Pentagonals" in Math::PlanePath::PyramidRows for a factorization on the roots making a noprimes gap.
A 4*step path splits a straight line in two, so for example the perfect squares are a straight line on the step=2 "Corner" path, and then on the step=8 SquareSpiral
they instead fall on two lines (lower left and upper right). In the bigger step there's one line of the even squares (2k)^2 == 4*k^2 and another of the odd squares (2k+1)^2. The gap between successive even squares increases by 8 each time and likewise between odd squares.
SelfSimilar Powers
The selfsimilar patterns such as PeanoCurve
generally have a base pattern which repeats at powers N=base^level or squares N=(base*base)^level. Or some multiple or relationship to such a power for things like KochPeaks
and GosperIslands
.
Base Path
 
2 HilbertCurve, HilbertSides, HilbertSpiral,
ZOrderCurve (default), GrayCode (default),
BetaOmega, AR2W2Curve, HIndexing,
ImaginaryBase (default), ImaginaryHalf (default),
SierpinskiCurve, SierpinskiCurveStair,
CubicBase (default) CornerReplicate,
ComplexMinus (default), ComplexPlus (default),
ComplexRevolving, DragonCurve, DragonRounded,
DragonMidpoint, AlternatePaper, AlternatePaperMidpoint,
CCurve, DigitGroups (default), PowerArray (default)
3 PeanoCurve (default), PeanoDiagonals (default),
WunderlichSerpentine (default),WunderlichMeander,
KochelCurve, GosperIslands, GosperSide
SierpinskiTriangle, SierpinskiArrowhead,
SierpinskiArrowheadCentres,
TerdragonCurve, TerdragonRounded, TerdragonMidpoint,
AlternateTerdragon,
UlamWarburton, UlamWarburtonQuarter (each level)
4 KochCurve, KochPeaks, KochSnowflakes, KochSquareflakes,
LTiling,
5 QuintetCurve, QuintetCentres, QuintetReplicate,
DekkingCurve, DekkingCentres, CincoCurve,
R5DragonCurve, R5DragonMidpoint
7 Flowsnake, FlowsnakeCentres, GosperReplicate
8 QuadricCurve, QuadricIslands
9 SquareReplicate
Fibonacci FibonacciWordFractal, WythoffArray
parameter PeanoCurve, PeanoDiagonals, WunderlichSerpentine,
ZOrderCurve, GrayCode, ImaginaryBase, ImaginaryHalf,
CubicBase, ComplexPlus, ComplexMinus, DigitGroups,
PowerArray
Many number sequences plotted on these selfsimilar paths tend to be fairly random, or merely show the tiling or path layout rather than much about the number sequence. Sequences related to the base can make holes or patterns picking out parts of the path. For example numbers without a particular digit (or digits) in the relevant base show up as holes. See for example "Power of 2 Values" in Math::PlanePath::ZOrderCurve.
Triangular Lattice
Some paths are on triangular or "A2" lattice points like
******
/ \ / \ / \ / \ / \ /
******
\ / \ / \ / \ / \ / \
******
/ \ / \ / \ / \ / \ /
******
\ / \ / \ / \ / \ / \
******
/ \ / \ / \ / \ / \ /
******
This is done in integer X,Y on a square grid by using every second square and offsetting alternate rows. This means sum X+Y even, ie. X,Y either both even or both odd, not of opposite parity.
. * . * . * . * . * . *
* . * . * . * . * . * .
. * . * . * . * . * . *
* . * . * . * . * . * .
. * . * . * . * . * . *
* . * . * . * . * . * .
The X axis the and diagonals X=Y and X=Y divide the plane into six equal parts in this grid.
X=Y X=Y
\ /
\ /
\ /
 X=0
/ \
/ \
/ \
The diagonal X=3*Y is the middle of the first sixth, representing a twelfth of the plane.
The resulting triangles are flatter than they should be. The triangle base is width=2 and top is height=1, whereas it would be height=sqrt(3) for an equilateral triangle. That sqrt(3) factor can be applied if desired,
X, Y*sqrt(3) side length 2
X/2, Y*sqrt(3)/2 side length 1
Integer Y values have the advantage of fitting pixels on the usual kind of raster computer screen, and not losing precision in floating point results.
If doing a generalpurpose coordinate rotation then be sure to apply the sqrt(3) scale factor before rotating or the result will be skewed. 60 degree rotations can be made within the integer X,Y coordinates directly as follows, all giving integer X,Y results.
( X3Y)/2, ( X+Y)/2 rotate +60 (anticlockwise)
( X+3Y)/2, (X+Y)/2 rotate 60 (clockwise)
(X3Y)/2, ( XY)/2 rotate +120
(X+3Y)/2, (XY)/2 rotate 120
X,Y rotate 180
(X+3Y)/2, (XY)/2 mirror across the X=3*Y twelfth (30deg)
The sqrt(3) factor can be worked into a hypotenuse radial distance calculation as follows if comparing distances from the origin.
hypot = sqrt(X*X + 3*Y*Y)
See for instance TriangularHypot
which is triangular points ordered by this radial distance.
FORMULAS
The formulas section in the POD of each class describes some of the calculations. This might be of interest even if the code is not.
Triangular Calculations
For a triangular lattice, the rotation formulas above allow calculations to be done in the rectangular X,Y coordinates which are the inputs and outputs of the PlanePath functions. Another way is to number vertically on a 60 degree angle with coordinates i,j,
...
* * * 2
* * * 1
* * * j=0
i=0 1 2
These coordinates are sometimes used for hexagonal grids in board games etc. Using this internally can simplify rotations a little,
j, i+j rotate +60 (anticlockwise)
i+j, i rotate 60 (clockwise)
ij, i rotate +120
j, ij rotate 120
i, j rotate 180
Conversions between i,j and the rectangular X,Y are
X = 2*i + j i = (XY)/2
Y = j j = Y
A third coordinate k at a +120 degrees angle can be used too,
k=0 k=1 k=2
* * *
* * *
* * *
0 1 2
This is redundant in that it doesn't number anything i,j alone can't already, but it has the advantage of turning rotations into just sign changes and swaps,
k, i, j rotate +60
j, k, i rotate 60
j, k, i rotate +120
k, i, j rotate 120
i, j, k rotate 180
The conversions between i,j,k and the rectangular X,Y are like the i,j above but with k worked in too.
X = 2i + j  k i = (XY)/2 i = (X+Y)/2
Y = j + k j = Y or j = 0
k = 0 k = Y
N to dX,dY  Fractional
n_to_dxdy()
is the change from N to N+1, and is designed both for integer N and fractional N. For fractional N it can be convenient to calculate a dX,dY at floor(N) and at floor(N)+1 and then combine the two in proportion to frac(N).
int+2


N+1 \
/ 
/  
/   frac
/  
/  
/  /
intNint+1
this_dX dX,dY next_dX
this_dY next_dY

frac 1frac
int = int(N)
frac = N  int 0 <= frac < 1
this_dX,this_dY at int
next_dX,next_dY at int+1
at fractional N
dX = this_dX * (1frac) + next_dX * frac
dY = this_dY * (1frac) + next_dY * frac
This is combination of this_dX,this_dY and next_dX,next_dY in proportion to the distances from positions N to int+1 and from int+1 to N+1.
The formulas can be rearranged to
dX = this_dX + frac*(next_dX  this_dX)
dY = this_dY + frac*(next_dY  this_dY)
which is like dX,dY at the integer position plus fractional part of a turn or change to the next dX,dY.
N to dX,dY  SelfSimilar
For most of the selfsimilar paths such as HilbertCurve
, the change dX,dY is determined by following the state table transitions down through either all digits of N, or to the last non9 digit, ie. drop any low digits equal to radix1.
Generally paths which are the edges of some tiling use all digits, and those which are the centres of a tiling stop at the lowest non9. This can be seen for example in the DekkingCurve
using all digits, whereas its DekkingCentres
variant stops at the lowest non24.
Perhaps this alldigits vs lownon9 would even characterize path style as edges or centres of a tiling, when a path is specified in some way that a tiling is not quite obvious.
SUBCLASSING
The mandatory methods for a PlanePath subclass are
n_to_xy()
xy_to_n()
xy_to_n_list() if multiple N's map to an X,Y
rect_to_n_range()
It sometimes happens that one of n_to_xy()
or xy_to_n()
is easier than the other but both should be implemented.
n_to_xy()
should do something sensible on fractional N. The suggestion is to make it an X,Y proportionally between integer N positions. It could be along a straight line or an arc as best suits the path. A straight line can be done simply by two calculations of the surrounding integer points, until it's clear how to work the fraction into the code directly.
xy_to_n_list()
has a base implementation calling plain xy_to_n()
to give a single N at X,Y. If a path has multiple Ns at an X,Y (eg. DragonCurve
) then it must implement xy_to_n_list()
to return all those Ns, and must also implement a plain xy_to_n()
returning the first of them.
rect_to_n_range()
can initially be any convenient overestimate. It should give N big enough that from there onwards all points are sure to be beyond the given X,Y rectangle.
The following descriptive methods have base implementations
n_start() 1
class_x_negative() \ 1, so whole plane
class_y_negative() /
x_negative() calls class_x_negative()
y_negative() calls class_x_negative()
x_negative_at_n() undef \ as for no negatives
y_negative_at_n() undef /
The base n_start()
starts at N=1. Paths which treat N as digits of some radix or where there's selfsimilar replication are often best started from N=0 instead since doing so puts nice powersof2 etc on the axes or diagonals.
use constant n_start => 0; # digit or replication style
Paths which use only parts of the plane should define class_x_negative()
and/or class_y_negative()
to false. For example if only the first quadrant X>=0,Y>=0 then
use constant class_x_negative => 0;
use constant class_y_negative => 0;
If negativeness varies with path parameters then x_negative()
and/or y_negative()
follow those parameters and the class_()
forms are whether any set of parameters ever gives negative.
The following methods have base implementations calling n_to_xy()
. A subclass can implement them directly if they can be done more efficiently.
n_to_dxdy() calls n_to_xy() twice
n_to_rsquared() calls n_to_xy()
n_to_radius() sqrt of n_to_rsquared()
SacksSpiral
is an example of an easy n_to_rsquared()
. TheodorusSpiral
is only slightly trickier. Unless a path has some sort of easy X^2+Y^2 then it might as well let the base implementation call n_to_xy()
.
The way n_to_dxdy()
supports fractional N can be a little tricky. One way is to calculate dX,dY on the integer N below and above and combine as described in "N to dX,dY  Fractional". For some paths the calculation of turn or direction at ceil(N) can be worked into a calculation of the direction at floor(N) so not much more work.
The following methods have base implementations calling xy_to_n()
. A subclass might implement them directly if it can be done more efficiently.
xy_is_visited() defined(xy_to_n($x,$y))
xyxy_to_n() \
xyxy_to_n_either()  calling xy_to_n_list()
xyxy_to_n_list() 
xyxy_to_n_list_either() /
Paths such as SquareSpiral
which fill the plane have xy_is_visited()
always true, so for them
use constant xy_is_visited => 1;
For a tree path the following methods are mandatory
tree_n_parent()
tree_n_children()
tree_n_to_depth()
tree_depth_to_n()
tree_num_children_list()
tree_n_to_subheight()
The other tree methods have base implementations,
is_tree()

Checks for
n_start()
having nonzerotree_n_to_num_children()
. Usually this suffices, expectingn_start()
to be a root node and to have some children. tree_n_num_children()

Calls
tree_n_children()
and counts the number of return values. Many trees can count the children with less work than calculating outright, for exampleRationalsTree
is simply always 2 for N>=Nstart. tree_depth_to_n_end()

Calls
tree_depth_to_n($depth+1)1
. This assumes that the depth level ends where the next begins. This is true for the various breadthwise tree traversals, but anything interleaved etc will need its own implementation. tree_depth_to_n_range()

Calls
tree_depth_to_n()
andtree_depth_to_n_end()
. For some paths the row start and end, or start and width, might be calculated together more efficiently. tree_depth_to_width()

Returns
tree_depth_to_n_end()  tree_depth_to_n() + 1
. This suits breadthwise style paths where all points at$depth
are in a contiguous block. Any path not like that will need its owntree_depth_to_width()
. tree_num_children_minimum()
,tree_num_children_maximum()

Return the first and last values of
tree_num_children_list()
as the minimum and maximum. tree_any_leaf()

Calls
tree_num_children_minimum()
. If the minimumnum_children
is 0 then there's leaf nodes.
SEE ALSO
Math::PlanePath::SquareSpiral, Math::PlanePath::PyramidSpiral, Math::PlanePath::TriangleSpiral, Math::PlanePath::TriangleSpiralSkewed, Math::PlanePath::DiamondSpiral, Math::PlanePath::PentSpiral, Math::PlanePath::PentSpiralSkewed, Math::PlanePath::HexSpiral, Math::PlanePath::HexSpiralSkewed, Math::PlanePath::HeptSpiralSkewed, Math::PlanePath::AnvilSpiral, Math::PlanePath::OctagramSpiral, Math::PlanePath::KnightSpiral, Math::PlanePath::CretanLabyrinth
Math::PlanePath::HexArms, Math::PlanePath::SquareArms, Math::PlanePath::DiamondArms, Math::PlanePath::AztecDiamondRings, Math::PlanePath::GreekKeySpiral, Math::PlanePath::MPeaks
Math::PlanePath::SacksSpiral, Math::PlanePath::VogelFloret, Math::PlanePath::TheodorusSpiral, Math::PlanePath::ArchimedeanChords, Math::PlanePath::MultipleRings, Math::PlanePath::PixelRings, Math::PlanePath::FilledRings, Math::PlanePath::Hypot, Math::PlanePath::HypotOctant, Math::PlanePath::TriangularHypot, Math::PlanePath::PythagoreanTree
Math::PlanePath::PeanoCurve, Math::PlanePath::PeanoDiagonals, Math::PlanePath::WunderlichSerpentine, Math::PlanePath::WunderlichMeander, Math::PlanePath::HilbertCurve, Math::PlanePath::HilbertSides, Math::PlanePath::HilbertSpiral, Math::PlanePath::ZOrderCurve, Math::PlanePath::GrayCode, Math::PlanePath::AR2W2Curve, Math::PlanePath::BetaOmega, Math::PlanePath::KochelCurve, Math::PlanePath::DekkingCurve, Math::PlanePath::DekkingCentres, Math::PlanePath::CincoCurve
Math::PlanePath::ImaginaryBase, Math::PlanePath::ImaginaryHalf, Math::PlanePath::CubicBase, Math::PlanePath::SquareReplicate, Math::PlanePath::CornerReplicate, Math::PlanePath::LTiling, Math::PlanePath::DigitGroups, Math::PlanePath::FibonacciWordFractal
Math::PlanePath::Flowsnake, Math::PlanePath::FlowsnakeCentres, Math::PlanePath::GosperReplicate, Math::PlanePath::GosperIslands, Math::PlanePath::GosperSide
Math::PlanePath::QuintetCurve, Math::PlanePath::QuintetCentres, Math::PlanePath::QuintetReplicate
Math::PlanePath::KochCurve, Math::PlanePath::KochPeaks, Math::PlanePath::KochSnowflakes, Math::PlanePath::KochSquareflakes
Math::PlanePath::QuadricCurve, Math::PlanePath::QuadricIslands
Math::PlanePath::SierpinskiCurve, Math::PlanePath::SierpinskiCurveStair, Math::PlanePath::HIndexing
Math::PlanePath::SierpinskiTriangle, Math::PlanePath::SierpinskiArrowhead, Math::PlanePath::SierpinskiArrowheadCentres
Math::PlanePath::DragonCurve, Math::PlanePath::DragonRounded, Math::PlanePath::DragonMidpoint, Math::PlanePath::AlternatePaper, Math::PlanePath::AlternatePaperMidpoint, Math::PlanePath::TerdragonCurve, Math::PlanePath::TerdragonRounded, Math::PlanePath::TerdragonMidpoint, Math::PlanePath::AlternateTerdragon, Math::PlanePath::R5DragonCurve, Math::PlanePath::R5DragonMidpoint, Math::PlanePath::CCurve
Math::PlanePath::ComplexPlus, Math::PlanePath::ComplexMinus, Math::PlanePath::ComplexRevolving
Math::PlanePath::Rows, Math::PlanePath::Columns, Math::PlanePath::Diagonals, Math::PlanePath::DiagonalsAlternating, Math::PlanePath::DiagonalsOctant, Math::PlanePath::Staircase, Math::PlanePath::StaircaseAlternating, Math::PlanePath::Corner Math::PlanePath::CornerAlternating
Math::PlanePath::PyramidRows, Math::PlanePath::PyramidSides, Math::PlanePath::CellularRule, Math::PlanePath::CellularRule54, Math::PlanePath::CellularRule57, Math::PlanePath::CellularRule190, Math::PlanePath::UlamWarburton, Math::PlanePath::UlamWarburtonQuarter
Math::PlanePath::DiagonalRationals, Math::PlanePath::FactorRationals, Math::PlanePath::GcdRationals, Math::PlanePath::RationalsTree, Math::PlanePath::FractionsTree, Math::PlanePath::ChanTree, Math::PlanePath::CfracDigits, Math::PlanePath::CoprimeColumns, Math::PlanePath::DivisibleColumns, Math::PlanePath::WythoffArray, Math::PlanePath::WythoffPreliminaryTriangle, Math::PlanePath::PowerArray, Math::PlanePath::File
Math::PlanePath::LCornerTree, Math::PlanePath::LCornerReplicate, Math::PlanePath::ToothpickTree, Math::PlanePath::ToothpickReplicate, Math::PlanePath::ToothpickUpist, Math::PlanePath::ToothpickSpiral, Math::PlanePath::OneOfEight, Math::PlanePath::HTree
Math::NumSeq::PlanePathCoord, Math::NumSeq::PlanePathDelta, Math::NumSeq::PlanePathTurn, Math::NumSeq::PlanePathN
mathimage, displaying various sequences on these paths.
examples/numbers.pl, to print all the paths.
Other Ways To Do It
Math::Fractal::Curve, Math::Curve::Hilbert, Algorithm::SpatialIndex::Strategy::QuadTree
PerlMagick (module Image::Magick) demo scripts lsys.pl and tree.pl
HOME PAGE
http://user42.tuxfamily.org/mathplanepath/index.html
http://user42.tuxfamily.org/mathplanepath/gallery.html
LICENSE
Copyright 2010, 2011, 2012, 2013, 2014 Kevin Ryde
This file is part of MathPlanePath.
MathPlanePath is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version.
MathPlanePath is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with MathPlanePath. If not, see <http://www.gnu.org/licenses/>.