NAME

Device::Chip::BV4243 - chip driver for a BV4243

SYNOPSIS

use Device::Chip::BV4243;
use Future::AsyncAwait;

my $chip = Device::Chip::BV4243->new;
await $chip->mount( Device::Chip::Adapter::...->new );

await $chip->lcd_reset;
await $chip->lcd_string( "Hello, world!" );

DESCRIPTION

This Device::Chip subclass provides specific communication to a ByVac BV4243 LCD/touchpad display module attached to a computer via an I²C adapter.

The reader is presumed to be familiar with the general operation of this module; the documention here will not attempt to explain or define module-specific concpets or features, only the use of this module to access them.

METHODS

The following methods documented in an await expression return Future instances.

clear_keys

await $chip->clear_keys;

Clears the keypad buffer.

get_keycount

$count = await $chip->get_keycount;

Returns the number of keys waiting in the keypad buffer.

get_key

$key = await $chip->get_key;

Returns the next key from the keypad buffer, or 0 if there are none.

find_key

$pos = await $chip->find_key( $key );

Returns the position in the key buffer of the given key, or 0 if is not there.

get_scancode

$code = await $chip->get_scancode;

Returns the scan value from the keypad scanning matrix. This will be 0 if no key is being touched, or an integer value with at least two bits set if a key is being held.

beep

await $chip->beep( $msec );

Turns on the BELL output line for the specified number of miliseconds.

read_chan

@channels = await $chip->read_chan;

Returns the raw touchpad sensor values as 8 16bit integers.

read_delta

@deltas = await $chip->read_delta;

Returns the touchpad sensor values minus the trigger value.

sleep

await $chip->sleep;

Puts the device into sleep mode. It stops scanning the keypad, but will still respond to another command which will wake it up again.

lcd_reset

await $chip->lcd_reset;

Resets the LCD.

lcd_command

await $chip->lcd_command( $cmd );

Sends a numeric command to the LCD controller.

lcd_data

await $chip->lcd_data( $data );

Sends a byte of numerical data to the LCD controller.

lcd_string

await $chip->lcd_string( $str );

Sends a string of data to the LCD controller. This is a more efficient version of sending each byte of the string individually using "lcd_data".

lcd_signon

await $chip->lcd_signon;

Displays the signon string stored the in EEPROM.

lcd_backlight

await $chip->lcd_backlight( $red, $green, $blue );

Sets the level of each of the three backlight channels. Each must be a numeric value between 0 and 10 (inclusive). For single-backlight displays, use the $red channel.

reset

$chip->reset

Resets the device.

device_id

$id = await $chip->device_id;

Returns the device ID value as a 16 bit integer

version

$id = await $chip->version;

Returns the device firmware version as a 16 bit integer

eeprom_reset

await $chip->eeprom_reset;

Resets the configuration EEPROM back to default values.

eeprom_read

$val = await $chip->eeprom_read( $addr );

Reads a byte from the configuration EEPROM.

eeprom_write

await $chip->eeprom_write( $addr, $val );

Writes a byte to the configuration EEPROM.

SEE ALSO

http://www.pichips.co.uk/index.php/BV4243

AUTHOR

Paul Evans <leonerd@leonerd.org.uk>