NAME

XS::Parse::Sublike - XS functions to assist in parsing sub-like syntax

DESCRIPTION

This module provides some XS functions to assist in writing parsers for sub-like syntax, primarily for authors of keyword plugins using the PL_keyword_plugin hook mechanism. It is unlikely to be of much use to anyone else; and highly unlikely to be any use when writing perl code using these. Unless you are writing a keyword plugin using XS, this module is not for you.

This module is also currently experimental, and the design is still evolving and subject to change. Later versions may break ABI compatibility, requiring changes or at least a rebuild of any module that depends on it.

XS FUNCTIONS

boot_xs_parse_sublike

void boot_xs_parse_sublike(double ver)

Call this function from your BOOT section in order to initialise the module and parsing hooks.

ver should either be 0 or a decimal number for the module version requirement; e.g.

boot_xs_parse_sublike(0.04);

xs_parse_sublike

int xs_parse_sublike(const struct XSParseSublikeHooks *hooks, void *hookdata, OP **op_ptr)

This function performs the actual parsing of a sub-like keyword. It expects the lexer to be at a position just after the introduction keyword has been consumed, and will proceed to parse an optional name, list of attributes, signature (if enabled by use feature 'signatures'), and code body. The return value and op_ptr can be used directly from the keyword plugin function. It is intended this function be invoked from it, and the result returned directly.

For a more automated handling of keywords, see "register_xs_parse_sublike".

hooks should be a structure that can provide optional function pointers used to customise the parsing process at various stages. hookdata is an opaque pointer which is passed through to each of the hook stage functions.

register_xs_parse_sublike

void register_xs_parse_sublike(const char *keyword,
  const struct XSParseSublikeHooks *hooks, void *hookdata)

This function installs a set of parsing hooks to be associated with the given keyword. Such a keyword will then be handled automatically by a keyword parser installed by XS::Parse::Sublike itself.

When the keyword is encountered, the hook's permit function is first tested to see if the keyword is permitted at this point. If the function returns true then the keyword is consumed and parsed as per "xs_parse_sublike".

hookdata is an opaque pointer which is passed through to each of the hook stage functions when they are invoked.

xs_parse_sublike_any

int xs_parse_sublike_any(const struct XSParseSublikeHooks *hooks, void *hookdata,
  OP **op_ptr)

This function expects to consume an introduction keyword at the lexer position which is either sub or the name of another sub-like keyword, which has been previously registered using "register_xs_parse_sublike". It then proceeds to parse the subsequent syntax similar to how it would have parsed if encountered by the module's own keyword parser plugin, except that the second set of hooks given here also take effect.

If a regular sub is encountered, then this is parsed using the hooks in a similar way to xs_parse_sublike().

If a different registered sub-like keyword is encountered, then parsing is performed using both sets of hooks - the ones given to this function as well as the ones registered with the keyword. This allows their effects to combined. The hooks given by the hooks argument are considered to be on the "outside" from those of the registered keyword "inside". The outside ones run first for all stages, except pre_blockend which runs them inside-out.

hookdata is an opaque pointer which is passed through to each of the hook stage functions when they are invoked.

Note that this function is now vaguely discouraged, in favour of using a prefixing keyword instead, by using the XS_PARSE_SUBLIKE_FLAG_PREFIX flag.

PARSE CONTEXT

The various hook stages all share state about the ongoing parse process using various fields of the XSParseSublikeContext structure.

struct XSParseSublikeContext {
   SV *name;
   OP *attrs;
   OP *body;
   CV *cv;
   U32 actions;
   HV *moddata;
}

The actions field will contain a bitmask of action flags that control the various steps that XS::Parse::Sublike might take inbetween invoking hook stages. The initial value of this field is set after the name-parsing stage, depending on whether or not a name is found. Stage hook functions may modify the field to adjust the subsequent behaviour.

At the current ABI version, a module will have to set the XS_PARSE_SUBLIKE_COMPAT_FLAG_DYNAMIC_ACTIONS bit of the flags field in order to make use of the actions field. A future ABI version may remove this restriction.

XS_PARSE_SUBLIKE_ACTION_CVf_ANON

If set, the start_subparse() call will be set up for an anonymous function protosub; if not it will be set for a named function. This is set by default if a name was not found.

XS_PARSE_SUBLIKE_ACTION_SET_CVNAME

If set, the newly-constructed CV will have the given name set on it. This is set by default if a name was found.

On Perl versions 5.22 and above, this flag can be set even if XS_PARSE_SUBLIKE_ACTION_INSTALL_SYMBOL is not. In this case, the CV will not be reachable via the symbol table, even though it knows its own name and pretends that it is. On earlier versions of perl this flag will be ignored in that case.

XS_PARSE_SUBLIKE_ACTION_INSTALL_SYMBOL

If set, the newly-constructed CV will be installed into the symbol table at its given name. Note that it is not possible to enable this flag without also enabling XS_PARSE_SUBLIKE_ACTION_SET_CVNAME. This is set by default if a name was found.

XS_PARSE_SUBLIKE_ACTION_INSTALL_LEXICAL

If set, the newly-constructed CV will be installed into the currently compiling lexical pad as its given name. This is only available on Perl version 5.18 or above, and conflicts with the alternative of XS_PARSE_SUBLIKE_ACTION_INSTALL_SYMBOL. This is set by default if a name was found and the my keyword appeared before the construction.

XS_PARSE_SUBLIKE_ACTION_REFGEN_ANONCODE

If set, the syntax will yield the OP_REFGEN / OP_ANONCODE optree fragment typical of anonymous code expressions; if not it will be OP_NULL. This is set by default if a name was not found.

XS_PARSE_SUBLIKE_ACTION_RET_EXPR

If set, the syntax will parse like an expression; if not it will parse like a statement. This is set by default if a name was not found.

The moddata field will point towards an HV that modules can used to store extra data between stages. As a naming convention a module should prefix its keys with its own module name and a slash character, "Some::Module/field". The field will point to a newly-created HV for every parse invocation, and will be released when each parse is complete.

PARSE HOOKS

The XSParseSublikeHooks structure provides the following hook stages, which are invoked in the given order.

The structure has a flags field, which controls various optional parts of operation. The following flags are defined.

XS_PARSE_SUBLIKE_FLAG_BODY_OPTIONAL

If not set, the require_parts field will imply the XS_PARSE_SUBLIKE_PART_BODY flag, making the body part required. By setting this flag this will no longer happen. If all hooks agree, then the body will become optional.

XS_PARSE_SUBLIKE_FLAG_PREFIX

If set, the keyword is considered to be a prefix that can be placed in front of sub or another sub-like keyword, to add its set of hooks in addition to those of the following keyword. These prefices may be further stacked.

XS_PARSE_SUBLIKE_FLAG_SIGNATURE_NAMED_PARAMS

If set, use the extended signature parser of this module when parsing a signature and additionally permit the use of named parameter syntax, as documented in Sublike::Extended.

XS_PARSE_SUBLIKE_FLAG_SIGNATURE_PARAM_ATTRIBUTES

If set, use the extended signature parser of this module when parsing a signature and additionally permit the use of attribute declarations on parameter variables, as documented in Sublike::Extended.

In addition there are two U8 fields named require_parts and skip_parts which control the behaviour of various parts of the syntax which are usually optional. Any parts with bits set in require_parts become non-optional, and an error if they are missing. Any parts with bits set in skip_parts will skip the relevant part of the parsing process.

When multiple sets of hooks are combined by the xs_parse_sublike_any function, or as part of parsing prefixing keywords, these bitmasks are accumulated together with inclusive or. Any part required by any set of hooks will still be required; any step skipped by either will be skipped entirely.

If the same bit is set in both fields then the relevant parsing step will not be performed but it will still be an error for that section to be missing. This is likely not useful.

Note that for skipped parts, only the actual parsing steps are skipped. A hook function can still set the relevant fields in the context structure anyway to force a particular value for those parts.

XS_PARSE_SUBLIKE_PART_NAME

The name of the function.

XS_PARSE_SUBLIKE_PART_ATTRS

The attributes of the function.

This part can be skipped, but the bit is ignored when in require_parts. It is always permitted to not provide any additional attributes to a function definition.

XS_PARSE_SUBLIKE_PART_SIGNATURE

The parameter signature of the function.

This part can be skipped, but it is always permitted not to provide a signature for a function definition even if the bit it set in require_parts. This is because such syntax only applies when use feature 'signatures' is in effect, and only on supporting perl versions.

However, setting the bit in require_parts instead has the effect of enabling use feature 'signatures' (at least on supporting perl versions), thus permitting the syntax to use a signature even if the signatures feature was not previously enabled.

XS_PARSE_SUBLIKE_PART_BODY

The actual body of the function, expressed as a brace-delimited block.

This part cannot be skipped, but it can be made optional by omitting it from the require_parts field. Instead of the block, it is permitted to place a single semicolon (;) to act as a statement terminator; thus giving the same syntax as a subroutine forward declaration.

In this case, the body and cv fields of the context structure will remain NULL.

This flag is currently implied on the require_parts field if the hook does not supply the XS_PARSE_SUBLIKE_FLAG_BODY_OPTIONAL flag; meaning that most use-cases will make it a required part.

The permit Stage

const char *permit_hintkey
bool (*permit)(pTHX_ void *hookdata)

Called by the installed keyword parser hook which is used to handle keywords registered by "register_xs_parse_sublike".

As a shortcut for the common case, the permit_hintkey may point to a string to look up from the hints hash. If the given key name is not found in the hints hash then the keyword is not permitted. If the key is present then the permit function is invoked as normal.

If not rejected by a hint key that was not found in the hints hash, the function part of the stage is called next and should inspect whether the keyword is permitted at this time perhaps by inspecting other lexical clues, and return true only if the keyword is permitted.

Both the string and the function are optional. Either or both may be present. If neither is present then the keyword is always permitted - which is likely not what you wanted to do.

Parse Name

At this point, the optional name is parsed and filled into the name field of the context.

The pre_subparse Stage

void (*pre_subparse)(pTHX_ struct XSParseSublikeContext *ctx, void *hookdata)

Invoked just before start_subparse() is called.

Parse Attrs

At this point the optional sub attributes are parsed and filled into the attrs field of the context, then block_start() is called.

The filter_attr Stage

bool (*filter_attr)(pTHX_ struct XSParseSublikeContext *ctx,
   SV *attr, SV *val, void *hookdata);

If this optional stage is defined, then each individual attribute is passed through this optional filter function immediately as each is parsed. attr will be a string SV containing the name of the attribute, and val will either be NULL, or a string SV containing the contents of the parens after its name (without the parens themselves).

If the filter returns true, it indicates that it has in some way handled the attribute and it should not be added to the list given to newATTRSUB(). If the filter returns false it will be handled in the usual way; equivalent to the case where the filter function did not exist.

The post_blockstart Stage

void (*post_blockstart)(pTHX_ struct XSParseSublikeContext *ctx, void *hookdata)

Invoked after the block_start() function has been called. This hook stage may wish to perform any alterations of PL_compcv or related, inspect or alter the lexical pad, provide hints hash values, or any other tasks before the signature and code body are parsed.

Parse Body

At this point, the main body of the function is parsed and the optree is stored in the body field of the context. If the perl version supports sub signatures and they are enabled and found, the body will be prefixed with the signature ops as well.

The pre_blockend Stage

void (*pre_blockend)(pTHX_ struct XSParseSublikeContext *ctx, void *hookdata)

Invoked just before the block_end() function is invoked. The hook stage may wish to inspect or alter the optree stored in the body context field.

The post_newcv Stage

void (*post_newcv)(pTHX_ struct XSParseSublikeContext *ctx, void *hookdata)

Invoked just after newATTRSUB() has been invoked on the optree. The hook stage may wish to inspect or alter the CV stored in the cv context field.

AUTHOR

Paul Evans <leonerd@leonerd.org.uk>