18 Dec 2004 04:35:25 UTC
- Distribution: SCUBA-Table-NoDeco
- Module version: 0.03
- Source (raw)
- Browse (raw)
- How to Contribute
- Issues (1)
- Testers (439 / 68 / 1)
- KwaliteeBus factor: 0
- 96.88% Coverage
- License: unknown
- Activity24 month
- Download (11.86KB)
- MetaCPAN Explorer
- Subscribe to distribution
- This version
- Latest versionPJF Paul Jamieson Fenwick
- WARNING AND DISCLAIMER
- SEE ALSO
- COPYRIGHT AND LICENSE
SCUBA::Table::NoDeco - Calculate no-decompression dive times.
use SCUBA::Table::NoDeco; my $table = SCUBA::Table::NoDeco->new(); $table->dive(metres => 15, minutes => 30); print $table->group,"\n"; # Prints "E" $table->surface(minutes => 60); print $table->group,"\n"; # Prints "D" print $table->max_time(metres => 30),"\n"; # Prints 6
Do NOT use this module as your sole source of no-decompression dive times. This module is intended for use only as a guide to assist in planning your dives. ALWAYS calculate and verify your dive times by hand once you have planned your dives. If you have a dive computer, follow its instructions for use.
SCUBA diving involves serious risks of injury or death, and should only be performed by individuals in good health and with the appropriate skills and training. Even when tables are used with proper safety procedures, decompression sickness may still occur.
The author provides ABSOLUTELY NO WARRANTY on this module, without even the implied warranty of merchantability or fitness for a particular purpose. Use entirely at your own risk.
This module provides the ability to perform useful calculations using dive-tables, including calculating dive groups and maximum no-decompression times for repetitive dives. A selection of tables are available. The module assumes that the diver is using air as their breathing gas.
The following methods are provided.
my $stn = SCUBA::Table::NoDeco->new(table => "SSI");
This class method returns a SCUBA::Table::NoDeco object. It takes an optional table argument, specifying which dive table should be used.
If no dive table is supplied then the module will use the default SSI table. This default may change in future releases, so you should not rely upon this default.
SSI tables are the only ones supported in the present release.
my @tables = SCUBA::Table::NoDeco->list_tables();
This method returns a list of tables that can be selected when creating a new SCUBA::Table::NoDeco object.
my $max_depth_ft = $stn->max_table_depth(units => "feet"); my $max_depth_mt = $stn->max_table_depth(units => "metres");
This method provides the maximum depth for repetitive dives provided by the tables currently in use. Some tables may provide a greater depth for non-reptetitve dives. This function does not supply the maximum safe depth (however see "max_depth"). The units argument is mandatory.
This method resets the object to its pristine state. The table used for dive calculations is retained.
print "You are using the ",$stn->table," tables\n";
This method simply returns the name of the dive table being used by the
my $group = $stn->dive(feet => 60, minutes => 30); my $group = $stn->dive(metres => 18, minutes => 30);
This method determines and sets the diver's group for the dive information provided. If the dive 'falls off' the tables, then an exception is returned. This method takes into account the diver's current group, surface interval, and residual nitrogen time.
If the diver does not have a surface interval of at least 10 minutes, this will consider the dive to be a continuation of the previous dive. The dive times will be added, and the maximum depth of both dives will be used to calculate the diver's group.
print "You are a ",$stn->group," diver\n";
The group method returns the current letter designation representing the amount of residual nitrogen present in the diver. The letter designation is always upper-case. A diver with no residual nitrogen has no group, represented by the empty string.
$stn->surface(minutes => 60); # Spend an hour on surface. print "Total surface time ",$stn->surface," minutes\n";
This method returns the total time of the current surface interval. If the optional
minutesargument is provided, this is added to the diver's current surface interval before returning the total minutes elapsed.
print "Your maximum time at 18 metres is ",$stn->max_time(metres => 18),"\n"; print "Your maximum time at 60 feet is ",$stn->max_time(feet => 60),"\n";
This calculates the maximum no-decompression time for a dive to the specified depth. The diver's current group is taken into account.
If the diver cannot reach the depth supplied without breaking no-decompression limits then the value '0' is returned.
print "The maximum depth you may dive is ",$stn->max_depth(units => "metres")," metres\n"; print "Max depth for a 20 minute dive is ",$stn->max_depth(units => "feet", minutes => 20)," feet\n";
This method returns the maximum possible depth given the diver's current group, or the maximum depth available on your table if no group is set.
The method takes an optional argument (minutes), in which case the maximum depth for a dive of that duration will be returned.
This method returns '0' if the diver is not allowed to make *any* dive for the period of time specified.
my $rnt = $stn->rnt(metres => 12); my $rnt2 = $stn->rnt(feet => 40);
This method returns the residual nitrogen time for a diver, in minutes. The depth argument (in either metres or feet) is mandatory.
If the depth supplied means that the diver cannot make a no-decompression dive, then an undefined value is returned.
http://pjf.id.au/perl/scuba-table-nodeco/ - SCUBA::Table::NoDeco webpage, including links to support mailing list.
http://pjf.id.au/dive/calc.html - Online dive-planner for programmers too lazy to use the module.
Almost certainly. If you find one, please report it to email@example.com.
The PADI tables are generated from an algorithm which provides almost an exact match to the printed PADI tables, however there are some inconsistancies. Treat the PADI tables with particular care.
Add the ability to specify a default unit (metres/feet) for methods that currently require them.
Paul Fenwick, <firstname.lastname@example.org>
Copyright (C) 2004 by Paul Fenwick.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.4 or, at your option, any later version of Perl 5 you may have available.
Module Install Instructions
To install SCUBA::Table::NoDeco, copy and paste the appropriate command in to your terminal.
perl -MCPAN -e shell install SCUBA::Table::NoDeco
For more information on module installation, please visit the detailed CPAN module installation guide.