=head1 NAME

Prima::faq - Frequently asked questions about Prima

=head1 DESCRIPTION

The FAQ covers various topics around Prima, such as distribution, compilation,
installation, and programming.

=head1 COMMON

=head2 What is Prima?

Prima is a general purpose extensible graphical user interface toolkit with a
rich set of standard widgets and an emphasis on 2D image processing tasks. A
Perl program using PRIMA looks and behaves identically on X, Win32.

=head2 Yeah, right. So what is Prima again?

Ok. A Yet Another Perl GUI.

=head2 Why bother with the Yet Another thing, while there is Perl-Tk and plenty of others?

Prima was started on OS/2, where Tk didn't really run. We have had two options
- either port Tk, or write something on our own, probably better than the
existing tools.  We believe that we've succeeded.

Interestingly enough, Prima still builds for OS/2 (as of July 2012), but its support
was killed because noone needs it anyway.

=head2 Why Perl?

Why not? Perl is great. The high-level GUI logic fits badly into C, C++, or the
like, so a scripting language is probably the way to go here.

=head2 But I want to use Prima in another language.

Unless your language has runtime binding with perl, you cannot.

=head2 Who wrote Prima?

Dmitry Karasik implemented the majority of the toolkit, after the original idea
by Anton Berezin. The latter and set of contributors helped the development of
the toolkit since then.

=head2 What is the copyright?

The copyright is a modified BSD license, where only two first paragraphs remain
out of the original four. The text of copyright is present is almost all files
of the toolkit.

=head2 I'd like to contribute.

You can do this is several ways. The project would probably best benefit from
the advocacy, because not many people use it. Of course, you can send in new
widgets, patches, suggestions, or even donations. Also, documentation is the
thing that needs a particular attention, since my native language is not
English, so if there are volunteers for polishing of the Prima docs, you are
very welcome.

=head1 INSTALLATION

=head2 Where can I download Prima?

L<http://www.prima.eu.org> contains links to source and binary download
resources, instructions on how to subscribe to the Prima mailing list,
documentation, and some other useful info.

=head2 What is better, source or binary?

Depends where your are and what are your goals. On unix, the best is to use the
source. On win32 the binaries probably are preferred. If you happen to
use cygwin you probably still better off using the source.

=head2 How to install binary distribution?

First, check if you've downloaded Prima binary for the correct version of Perl.
For win32 ActiveState builds, difference in the minor digits of the Perl
version shouldn't be a problem, for example, binary distribution for Perl build
#805 should work with Perl build #808, etc etc.

To install, unpack the archive and type 'perl ms_install.pl'.  The files will
be copied into the perl tree.

=head2 How to compile Prima from source?

Type the following:

   perl Makefile.PL
   make
   make install

If the 'perl Makefile.PL' fails complaining to strange errors, you can check
makefile.log to see if anything is wrong. A typical situation here is that
Makefile.PL may report that is cannot find Perl library, for example, where
there actually it invokes the compiler in a wrong way.

Note, that in order to get Prima working from sources, your system must contain
graphic libraries, such as libgif or ligjpeg, for Prima to load graphic
files.

=head2 What's about the graphic libraries?

To load and save images, Prima employs graphic libraries. Such as, to load GIF
files, libgif library is used, etc. Makefile.PL finds available libraries and
links Prima against these. It is possible to compile Prima without any, but this
is not really useful.

On every supported platform Prima can make use of the following graphic
libraries:

   libX11   - XBM bitmaps
   libXpm   - Xpm pixmaps
   libjpeg  - JPEG images
   libgif   - GIF images
   libpng   - PNG images
   libtiff  - tiff images
   libwebp,libwebpdemux,libwebpmux  - WebP images

Strawberry perl and Cygwin come with most of them, so on these installations Prima just
compiles without any throuble. For other perl builds, use one of C<Prima::codecs::>
modules that contains the needed include and lib files. If you're installing Prima
through CPAN, that gets done authomatically.

=head2 img/codec_XXX.c compile error

C<img/codec_XXX.c> files are C sources for support of the graphic libraries. In
case a particular codec does not compile, the ultimate fix is to remove the
file and re-run Makefile.PL . This way, the problem can be avoided easily,
although at cost of a lacking support for a graphic format.

=head2 How'd I check what libraries are compiled in?

   perl -MPrima -e 'print map { $_->{name}.qq(\n) } @{Prima::Image->codecs};'

=head2 I have a graphic library installed, but Makefile.PL doesn't find it

The library is probably located in a weird directory so Makefile.PL must be
told to use it by adding LIBPATH+=/some/weird/lib, and possibly
INCPATH+=/some/weird/include in the command line. Check makefile.log created by
Makefile.PL for the actual errors reported when it tries to use the
library.

=head2 Compile error

There are various reasons why a compilation may fail. The best would be
to copy the output together with outputs of env and perl -V and send these into
the Prima mailing list.

=head2 Prima doesn't run

Again, there are reasons for Prima to fail during the start.

First, check whether all main files are installed correctly. F<Prima.pm> must
be in your perl directory, and Prima library file ( F<Prima.a> or F<Prima.so> for
unix, F<Prima.dll> for win32 ) is copied in the
correct location in the perl tree.

Second, try to run 'perl -MPrima -e 1' . If Prima.pm is not found, the error
message would something like

  Can't locate Prima.pm in @INC

If Prima library or one of the libraries it depends on cannot be found, perl
Dynaloader would complain. On win32 this usually happen when
some dll files Prima needs are not found. If this is the case, try
to copy these files into your PATH, for example in C:/WINNT .

=head2 Prima doesn't get installed using ppm (ActiveState)

Prima uses a non-conventional build process, which is not picked up by
automated ActiveState ppm builder. So if you run "ppm install Prima" and
it succeeds but installs nothing, try this:

  ppm install --force http://cpan.uwinnipeg.ca/PPMPackages/10xx/Prima.ppd

(Justin Allegakoen and Randy Kobes:thanks!)

=head2 Prima error: Can't open display

This error happens when you've compiled Prima for X11, and no connection to X11
display can be established. Check your DISPLAY environment variable, or use
--display parameter when running Prima. If you do not want Prima to connect to
the display, for example, to use it inside of a CGI script, either use --no-x11
parameter or include C<use Prima::noX11> statement in your program.

=head2 X11: my fonts are bad!

Check whether you have Xft and fontconfig installed. Prima benefits greatly from
having been compiled with Xft/fontconfig. Read more in L<Prima::X11> .

=head2 Where are the docs installed?

Prima documentation comes in .pm and .pod files. These, when installed,
are copied under perl tree, and under man tree in unix. So,
'perldoc Prima' should be sufficient to invoke the main page
of the Prima documentation. Other pages can be invoked as 'perldoc Prima::Buttons',
say, or, for the graphical pod reader, 'podview Prima::Buttons'. podview
is the Prima doc viewer, which is also capable of displaying any POD page.

There is also a pdf file on the Prima web site www.prima.eu.org, which contains
the same set of documentation but composed as a single book. Its sources are
in utils/makedoc directory, somewhat rudimentary and require an installation
of latex and dvips to produce one of tex, dvi, ps, or pdf targets.

=head2 I've found a bug!

Send the bug report into the mailing list or to CPAN RT.

=head1 PROGRAMMING

=head2 How can I use .fm files of the Visual Builder inside my program?

podview L<Prima::VB::VBLoader>

=head2 I want to use Prima inside CGI for loading and converting images only, without X11 display.

   use Prima::noX11; # this prevents Prima from connecting to X11 display
   use Prima;
   my $i = Prima::Image-> load( ... )

Note that drawing on images will be severly limited - only pixel and put_image methods would work.

=head2 How would I change several properties with a single call?

   $widget-> set(
      property1 => $value1,
      property2 => $value2,
      ...
   );

=head2 I want Prima::Edit to have feature XXX

If the feature is not governed by none of the C<Prima::Edit> properties,
you've to overload C<::on_paint>. It is not that hard as you might think.

If the feature is generic enough, you can send a patch in the list.

=head2 Tk ( Wx, Qt, whatever ) has a feature Prima doesn't.

Well, I'd probably love to see the feature in Prima as well, but I don't
have a time to write it myself. Send in a patch, and I promise I'll check it out.

=head2 I wrote a program and it looks ugly with another font size

This would most certainly happen when you rely on your own screen properties.
There are several ways to avoid this problem.

First, if one programs a window where there are many widgets independent of each
other size, one actually can supply coordinates for these widgets as they are
positioned on a screen. Don't forget to set C<designScale>
property of the parent window, which contains dimensions of the font used to design the
window. One can get these by executing

    perl -MPrima -MPrima::Application -le '$_=$::application->font; print $_->width, q( ), $_->height';

This way, the window and the widgets would get resized automatically under another font.

Second, in case the widget layout is not that independent, one can position the
widgets relatively to each other by explicitly calculating widget extension. For
example, an C<InputLine> would have height relative to the font, and to have a
widget placed exactly say 2 pixels above the input line, code something like

    my $input = $owner-> insert( InputLine, ... );
    my $widget = $owner-> insert( Widget, bottom => $input-> top + 2 );

Of course one can change the font as well, but it is a bad idea since users
would get annoyed by this.

Third, one can use geometry managers, similar to the ones in Tk. See
L<Prima::Widget::pack> and L<Prima::Widget::place>.

Finally, check the widget layouts with L<Prima::Stress> written specifically for this
purpose:

    perl -MPrima::Stress myprogram

=head2 How would I write a widget class myself?

There are lots and lots of examples of this. Find a widget class similar to
what you are about to write, and follow the idea. There are, though, some non-evident
moments worth to enumerate.

=over

=item *

Test your widget class with different default settings, such as colors, fonts,
parent sizes, widget properties such as buffered and visible.

=item *

Try to avoid special properties for C<create>, where for example a particular property
must always be supplied, or never supplied, or a particular combination of properties is
expected. See if the DWIM principle can be applied instead.

=item *

Do not be afraid to define and re-define notification types. These have large number
of options, to be programmed once and then used as a DWIM helper. Consider for which
notifications user callback routines ( onXxxx ) would be best to be called first, or
last, whether a notification should be of multiple or single callback type.

If there is a functionality better off performed by the user-level code, consider
creating an individual notification for this purpose.

=item *

Repaint only the changed areas, not the whole widget.

If your widget has scrollable areas, use C<scroll> method.

Inside C<on_paint> check whether the whole or only a part of the widget is
about to be repainted. Simple optimizations here increase the speed.

Avoid using pre-cooked data in C<on_paint>, such as when for example only a
particular part of a widget was invalidated, and this fact is stored in an
internal variable. This is because when the actual C<on_paint> call is
executed, the invalid area may be larger than was invalidated by the class
actions. If you must though, compare values of C<clipRect> property to see
whether the invalid area is indeed the same as it is expected.

Remember, that inside on_paint all coordinates are inclusive-inclusive,
and outside inclusive-exclusive.

Note, that C<buffered> property does not guarantee that the widget
output would be actually buffered.

=item *

Write some documentation and example of use.

=back

=head2 How would I add my widget class to the VB palette?

Check Prima/VB/examples/Widgety.pm . This file, if loaded through
'Add widget' command in VB, adds example widget class and example
VB property into the VB palette and Object Inspector.

=head2 How would I use unicode/UTF8 in Prima?

Basically,

   $::application-> wantUnicodeInput(1)

is enough to tell Prima to provide input in Unicode/UTF8. Note, that if the
data received in that fashion are to be put through file I/O, the C<'utf8'> IO
layer must be selected ( see L<open> ).

Prima can input and output UTF8 text if the underlying system capabilities
support that ( check Prima::Application::get_system_value, C<sv::CanUTF8_Input>
and C<sv::CanUTF8_Output> ).  Displaying UTF8 text is unproblematic, because Perl
scalars can be unambiguously told whether the text they contain is in UTF8 or
not. The text that comes from the user input
- keyboard and clipboard - can be treated and reported to Prima
either as UTF8 or plain text, depending on
C<Prima::Application::wantUnicodeInput> property.

The keyboard input is also easy, because a character key event comes with the character
code, not the character itself, and conversion between these is done via
standard perl's C<chr> and C<ord>.  The clipboard input is more complicated,
because the clipboard may contain both UTF8 and plain text data at once, and it
must be decided by the programmer explicitly which one is desired.  See more in
L<Prima::Clipboard/Unicode>.

=head2 Is there a way to display POD text that comes with my program / package ?

   $::application-> open_help( "file://$0" );
   $::application-> open_help( 'My::Package/BUGS' );

=head2 How to implement parallel processing?

Prima doesn't work if called from more than one thread, since Perl scalars
cannot be shared between threads automatically, but only if explicitly told,
by using L<thread::shared>. Prima does work in multithread environments though,
but only given it runs within a dedicated thread. It is important not to
call Prima methods from any other thread, because scalars that may be created
inside these calls will be unavailable to the Prima core, which would result
in strange errors.

It is possible to run things in parallel by calling the event processing
by hands: instead of entering the main loop with

   run Prima;

one can write

   while ( 1) {
      ... do some calculations ..
      $::application->yield;
   }

That'll give Prima a chance to handle accumulated events, but that technique is
only viable if calculations can be quantized into relatively short time frames.

The generic solution would be harder to implement and debug, but it scales
well. The idea is to fork a process, and communicate with it via its stdin
and/or stdout ( see L<perlipc> how to do that), and use L<Prima::File> to
asyncronously read data passed through a pipe or a socket.

Note: Win32 runtime library does not support asynchronous pipes, only asyncronous sockets.
Cygwin does support both asyncronous pipes and sockets.

=head2 How do I use Prima with AnyEvent ?

Prima works well with L<AnyEvent> but there are some minor differences in using
Prima. L<AnyEvent> is a generic event processing library that supports various
underlying event loop implementations such as L<EV>, L<Event>, L<POE> etc.
Prima internally uses its own event loop to perform its event handling and
L<AnyEvent> can support that by automatically selecting L<POE> to be the
internal implementation when Prima is loaded.  However, you may use L<AnyEvent>
with any other internal event loop implementation such as L<EV> along with Prima
with varying results depending on the event library used. There are a few points
to note:

=over

=item *

Prima has to be loaded before L<AnyEvent>.

=item *

If you want to use Prima's internal event loop system you have to install
L<POE::Loop::Prima> and include it in your code before Prima is loaded like
below:
        use POE 'Loop::Prima';
        use Prima qw/Application/;
        use AnyEvent;

=item *

You can call C<AnyEvent::detect> to check if the implementation is
C<'AnyEvent::Impl::POE'> if you want to use Prima's event loop or it should be
the event loop implementation you expect such as C<'AnyEvent::Impl::EV'>;

=item *

If you use L<POE::Loop::Prima> then you can continue to call C<run Prima> and
should not call L<AnyEvent>'s condition variable C<recv> function.

=item *

If you want to use another event library implementation of L<AnyEvent>, you have
to not call C<run Prima> but instead call L<AnyEvent>'s condition variable
C<recv> function.

=item *

You have to use C<$::application-E<gt>yield> in an C<AnyEvent-E<gt>timer> object to
allow for the Prima UI to update periodically, if you're not using
L<POE::Loop::Prima>.

=back

See full example in F<examples/socket_anyevent.pl> and
F<examples/socket_anyevent_poe.pl>.

=head2 How do I post an asynchronous message?

C<Prima::Component::post_message> method posts a message through the system event dispatcher
and returns immediately; when the message is arrived, C<onPostMessage> notification is triggered:


   use Prima qw(Application);
   my $w = Prima::MainWindow-> create( onPostMessage => sub { shift; print "@_\n" });
   $w-> post_message(1,2);
   print "3 4 ";
   run Prima;

   output: 3 4 1 2

This technique is fine when all calls to the C<post_message> on the object are
controlled.  To multiplex callbacks one can use one of the two scalars passed
to C<post_message> as callback identification. This is done by
L<Prima::Utils/post>, that internally intercepts C<$::application>'s
C<PostMessage> and provides the procedural interface to the same function:

   use Prima qw(Application);
   use Prima::Utils qw(post);

   post( sub { print "@_\n" }, 'a');
   print "b";
   run Prima;

   output: ba

=head2 Now to address widgets inside TabbedNotebook / TabbedScrollNotebook ?

The tabbed notebooks work as parent widgets for C<Prima::Notebook>, that
doesn't have any interface elements on its own, and provides only page flipping
function. The sub-widgets, therefore, are to be addressed as C<<
$TabbedNotebook-> Notebook-> MyButton >>.

=head2 How to compile a Prima-based module using XS?

Take a look at L<Prima::IPA>, L<Prima::OpenGL>, L<Prima::Image::Magick>, L<PDL::PrimaImage>,
and L<PDL::Drawing::Prima> . These modules compile against Prima dynamic module,
start from there. Note - it's important to include PRIMA_VERSION_BOOTCHECK in the "BOOT:"
section, to avoid binary incompatibilites, if there should be any.

=head2 How do I generate Prima executables with PAR?

You'll need some files that PAR cannot detect automatically. During the compilation
phase Makefile.PL creates utils/par.txt file that contains these files. Include them with this
command:

   pp -A utils/par.txt -o a.out my_program

=head1 AUTHOR

Dmitry Karasik, E<lt>dmitry@karasik.eu.orgE<gt>.

=head1 SEE ALSO

L<Prima>