2.49
- fixed rt.cpan.org#56532, '#' missed during fix for
56370 in 2.45.
- added test case for this too
2.48
- arg, uploaded the wrong file to pause, so another version
bump up.
- fixed typos in pod section for -ForceArray.
2.47
- fixed rt.cpan.org#53759 by adding new option -ForceArray.
when enabled a single config value enclosed in [] will become
an array forcefully.
- fixed typo in license: it is "artistic", not "artificial".
2.46
- fixed rt.cpan.org#56370: there was a sort() call in _store()
left, which lead to sorted arrays even if -SaveSorted were
turned off.
2.45
- fixed rt.cpan.org#50647 escaping bug. Now escaped $ or
backslash characters are handled correctly (across save too)
- fixed rt.cpan.org#52047, tied hash will remain tied
when savong to a file.
- fixed rt.cpan.org#54580, preserve single quotes during
variable interpolation corrected. No more using rand()
to mark single quotes but an incrementor instead.
- fixed rt.cpan.org#42721+54583, empty config values will no
more handed over to interpreting methods (as interpolate
or autotrue and the like) but returned as undef untouched.
2.44
- fixed rt.cpan.org#49023 by rolling back change in 2.43
in line 158, regarding GLOB support.
2.43
- fixed rt.cpan.org#40925, $indichar replaced by internal
configuration variable EOFseparator, which contains
a 256 bit SHA checksum of the date I fixed the bug.
This will prevent future conflicts hopefully. In addition
it makes it possible to make it customizable, if neccessary,
in a future release.
- fixed rt.cpan.org#42721, return undef for empty values
- fixed rt.cpan.org#42331, return undef for empty objects
- fixed rt.cpan.org#44600, comments after blockname
causes parser failure.
- fixed rt.cpan.org#42287, whitespace at beginning or end
of a quoted value gets lost after save().
- fixed rt.cpan.org#46184, variables that were not previously
defined are deleted when -InterPolateEnv is enabled.
- fixed bug in config loader for FileHandle objects, it
supports now any compatible object. Hint by Ingo Schmiegel.
- applied spelling- and speedup patches by Ville Skyttä.
- applied documentation patch by Jordan Macdonald.
2.42
- dist tarball for 2.41 missed t/Tie/LxHash.pm. Dammit.
the File to the MANIFEST.
2.41
- fixed rt.cpan.org#38635. apache-like include now supports
quoted strings.
- fixed rt.cpan.org#41748. saving config with -tie enabled
now keeps the tie as documented.
- added unit test for -tie. For this to work, a copy of
Tie::LxHash module is delivered with Config::General
source, but will not installed, in fact, it is only
used for 'make test' (number 50)
- fixed rt.cpan.org#39159. documentation of functional interface
now reflects that qw$method) is now required.
- applied patch by AlexK fixing rt.cpan.org#41030:
if files are included by means of a glob pattern having the -IncludeGlob
option activated, paths specified by the -ConfigPath option are being
neglected when trying to spot the files. This patch fixes this
- applied patch by fbicknel, fixes rt.cpan.org#41570:
An array of scalars (eg: option = [1,2,3]) cannot
be used for interpolation (which element shall we use?!), so
we ignore those types of lists and don't build a __stack for them.
2.40
- fixed SplitDelimiter parser regex, it does no more consider
non-whitespaces (\S+?) as the option name but anything
before the delimiter (.+?), this fixes bug rt.cpan.org#36607,
the fix of 2.39 were not sufficient. Thanks to
Jeffrey Ratcliffe for pointing it out.
- added new parameter -SaveSorted. The default value is 0,
that means configs will be saved unsorted (as always),
however if you want to save it sorted, turn this parameter
to 1. Thanks to Herbert Breunung for the hint.
- added complexity test, which checks a combination
of various complex features of the parser.
2.39
- fixed rt.cpan.org#35122. This one was one of the most
intriguing bugs I've ever observed in my own code. The
internal temporary __stack hashref were copied from one
subhash to another to enable inheritance of variables.
However, the hashes were copied by reference, so once a
value changed later, that value were overwritten because
the __stack in question were just a reference. I introduced
a simple function _copy() which copies the contents of
the __stack by value, which solved the bug.
Conclusion: beware of perl hash refs!
- fixed rt.cpan.org#36607, accept whitespaces in heredoc
names if split delimiter is gues (equalsign or whitespace)
- fixed rt.cpan.org#34080 (typo)
- fixed rt.cpan.org#35766. Variables inside single quoted
strings will no more interpolated (as the docu states).
Also added test case for this.
- fixed bug rt.cpan.org#33766. Checking for defined not true
in ::Extended::AUTOLOAD().
- added -UTF8 flag, which opens files in utf8 mode
(suggested by KAORU, rt.cpan.org#35583)
I decided not to add a test case for this, since perls
utf8 support is not stable with all versions.
2.38
- fixed rt.cpan.org#31529 variable inheritance failed
with multiple named blocks.
- fixed rt.cpan.org#33447, regex to catch variable
names were too strict, now - . + or : are allowed too.
- fixed rt.cpan.org#33385 and #32978 - using arrayrefs
as param to -String didn't work anymore (sic)
- fixed rt.cpan.org#33216 - variable stack were not properly
re-constructed for pre-existing variables if
-MergeDuplicateOptions is turned on.
2.37
- "fixed" rt.cpan.org#30199 - check for invalid and
unsupported structures, especially mixing blocks
and scalars with identical names.
- added checks to 'make test' to test for the above
checks.
- revoked patch of rt.cpan.org#27225, it broke running
code.
- fixed rt.cpan.org#30063 (and #27225!) by reimplementing
the whole interpolation code. The internal stack is
no more a class variable of the module but stored
directly within the generated config hash and cleaned
before returning to the user.
- added (modified) patch rt.cpan.org#30063 to check
if interpolation works with supplied default config
works.
2.36
- oh my goodness! For some unknown reason I deleted the
Makefile.PL before packaging. Dammit. So, here it is
again.
2.35
- 'make test' failed under perl 5.5 because some prequisite
modules were not found. So now I added all requirements
to Makefile.PL, even if those modules are part of
recent perls (beginning with 5.6). I could have also
added a 'use 5.6' to the code but this would users
of perl5 exclude. This way they have the possibility
to fix their installation. Hopefully.
No code changes otherwise.
2.34
- fixed rt.cpan.org#27271 - removed output file from
manifest.
- fixed rt.cpan.org#27225 - clear vars off the stack
if entering a new block, so old vars get not re-used.
- fixed rt.cpan.org#27110 - re-implemented support
for arrayref as -String parameter.
- fixed rt.cpan.org#24155 - relative include bug fixed.
- applied patch by GWYN, (see fixed rt.cpan.org#27622)
which allows the same file included multiple times.
there is no loop detection if turned on. new option
introduced: -IncludeAgain => 1 (default turned off).
- added support for -IncludeAgain to directory include
code too.
- the directory globbing code used slashes to join
directory and file names. changed this to use catfile()
instead.
2.33
- fixed rt.cpan.org#26333 - just return $con if env var
is undefined.
- applied part of a patch supplied by Vincent Rivellino <vince@cuz.cx>
which turns off explicit empty block support if in
apache compatibility mode, see next.
- added new option -ApacheCompatible, which makes the
module behave really apache compatible by setting the
required options.
- a little bit re-organized the code, most of the stuff
in new() is now outsourced into several extra subs to
make maintenance of the code easier. The old new() sub
in fact was a nightmare.
- fixed a bug reported by Otto Hirr <otto.hirr@olabinc.com>:
the _store() sub used sort() to sort the keys, which conflicts
with sorted hashes (eg. tied using Tie::IxHash).
- fixed tie bug reported by King, Jason <kingj@newsltd.com.au>,
loading of the tie module didn't work.
2.32
- fixed rt.cpan.org#24232 - import ENV vars only if defined
- fixed rt.cpan.org#20742 - dont' overwrite a var if re-defined
in current scope, interpolation failed for re-defined vars and used
the value of the var defined in outer scope, not the current one.
- fixed rt.cpan.org#17852 - a 0 as blockname were ignored. applied
patch by SCOP to t/run.t to test for 0 in blocks.
- applied most hints Perl::Critic had about Config::General:
o the functions ParseConfig SaveConfig SaveConfigString must
now imported implicitly. This might break existing code, but
is easily to fix.
o using IO::File instead of open().
o General.pm qualifies for "stern" level after all.
- added much more tests to t/run.t for 'make test'.
- using Test::More now.
2.31
- applied patches by Jason Rhinelander <jagerman@jagerman.com>:
o bugfix: multiple levels if include files didn't
work properly.
o new option -IncludeDirectories, which allows
to include all files of a directory. The directory
must be specified by -ConfigFile as usual.
o new option -IncludeGlob, which allows to
use globs (wildcards) to include multiple files.
o -ConfigPath can be speciefied using a single
scalar value instead of an array if there is only
one path.
o bugfix: quotes from quoted block names were
not removed properly.
o fixes and updates for tests (make test) for
the above patches.
Thanks a lot Jason.
- fixed number of tests in run.t
- applied suggestion by Eric Kisiel <eric.kisiel@adelphia.com>:
::Extended::keys() returns an empty hash if the
referring object is not hash.
- fixed bug #14770, "Use of uninitialized value.." during
environment variable interpolation.
2.30
- applied patch by Branislav Zahradnik
<brano@blueorange.sk> which adds -InterPolateEnv.
This allows to use environment variables too. It
implies -InterPolateVars.
- added object list capability for the ::Extended::obj()
method. If a certain key points to an array of
hashrefs, then the whole arrayref is returned.
Suggested by Alan Hodgkinson <alan@softxs.ch>.
2.29
- applied patch by brian@kronos.com via rt.cpan.org
#11211.
- applied patch by plasmaball@pchome.com.tw via
rt.cpan.org #5846
- added new files to MANIFEST file.
- added example.cfg to show the config format.
2.28
- fixed bug in save(), now blocks containing whitespaces
will be saved using quotes, in addition the parser observes
the quoting feature, added portion about this to the pod
doc. pointed out by Jeff Murphy <jcmurphy@jeffmurphy.org>.
- added internal list of files opened so far to avoid
reading in the same file multiple times.
Suggested by Michael Graham.
- added new method files() which returns the above list.
- added workaround for foolish perl installation on
debian systems (croak() doesn't work anymore as of
5.8.4, it's a shame!)
- applied patch by Michael Graham which fixes IncludeRelative
feature, now an included file is being included relative
to the calling config file, not the first one.
- added 'make test' targets for files() and include
stuff. (by Michael too)
2.27
- bugfix in _store, which caused warning when saving
a config containing empty hashes. Reported by
herbert breunung <deirdre_skye@web.de>.
- removed applied patch (added in 2.20), there are no more
calls to binmode(), this destroys portability, because
perls determines itself wether it uses \n or \r\n as newline.
Reported by herbert breunung too.
- applied patch by Danial Pearce <danial@infoxchange.net.au>,
scalars containing a backslash as the last character will
be written out as here-doc when storing a config to disk.
2.26
- fixed invalid regexp in _open() which circumvented
explicit empty block to work when the block statement
included whitespaces.
- more finetuning in Makefile.PL for cleaning emacs'
~ files.
2.25
- fixed bug with not working -IncludeRelative setting when
including a config file. It were only included from the
location relative to the underlying config if it were
non-existent. reported by Dmitry Koteroff <dmitry@koteroff.ru>.
- applied patch by Danial Pearce <danial@infoxchange.net.au>
which adds the -BackslashEscape parameter to enable
general escaping of special characters using the
backslash.
- fixed bug reported by Harold van Oostrom <cpan@lanceerplaats.nl>:
according to the documentation one can call new() with
a hash-ref as its single parameter which would then
used as the config. This didn't work and were fixed.
- added feature suggested by Eric Andreychek <eric@openthought.net>:
now block statements like this are allowed: "<directory blah/>"
which is called an explicit empty block. This generates just
an empty hash-ref and saves writing. In fact, internally it
will be converted to:
<directory blah>
</directory>
- fixed Makefile.PL: it cleans now files generated by 'make test'
properly. reported by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
- updated MANIFEST (in fact I did this some years ago the last time!)
also reported by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
2.24
- fixed Bug #3869 (rt.cpan.org) reported by
"Mike Depot" <mdepot@comcast.net>
- applied patch by Roland Huss <Roland.Huss@consol.de>,
which fixes a bug with the -Tie option, sub-hashes of
named blocks were not properly created (in fact, not
tied).
- added documentation to Interpolated.pm that it does not
interpolate variables in keys, see bug #3773 (rt.cpan.org).
2.23
- still versioning problem, stupid white man ;-)
Extended.pm is now 2.00 which *is* higher than 1.10.
2.22
- incremented all version numbers because of cpan problem.
no further changes. See Bug #3347 (rt.cpan.org).
2.21
- fixed bug in new() used $this instead of $self for empty
hashref creation if no config file given.
2.20
- fixed bug reported by Stefano di Sandro <stedis@ulis.it>: in
OOP mode (extended access) the obj() method returned the whole
config object if the given key does not exist. Now it returns
a new empty object.
- added patch by David Dick <david_dick@iprimus.com.au> which
sets $/ if it is unset.
- added patch by David Dick <david_dick@iprimus.com.au> which
calls the binmode() function in case the modules is being
used under win32 systems. Read perldoc -f binmode for more
informations on this issue.
- added feature suggested by Chase Phillips <cmp@uiuc.edu>:
the new() method has a new parameter -Tie which takes the
name of a Tie class that each new hash should be based off
of. This makes it possible to create a config hash with
ordered contents across nested structures.
2.19
- forgot to import 'catfile' from File::Spec. Bug reported by
various people.
- applied patch by Peter Tandler <Peter.Tandler@ipsi.fhg.de>
which adds a search-path feature for include files.
- applied patch by David Dick <david_dick@iprimus.com.au> which
adds an auto launder capability to the module which makes it
possible to use variables read by Config::General in a
tainted perlscript (executed with -T) for open(), backtick calls
or something which the taintmode considers to be dangerous.
2.18
- fixed Bug #2325 (rt.cpan.org). The subs exported by File::Spec
will now imported explicitly.
- fixed warning about double my'ed variable $dummi, changed it
to undef because it was unused anyway.
2.17
- added File::Spec support which makes the modules more portable
(i.e. on win32 systems),
as suggested by Peter Tandler <Peter.Tandler@ipsi.fhg.de>.
2.16
- applied patch by Michael Gray <mjg17@eng.cam.ac.uk> which
fixes a bug in the Interpolate.pm submodule. A second variable,
when immediately following the first, did not get interpolated,
i.e. ${var1}${var2}.
2.15 - fixed Bug in SaveConfig***, which didn't work.
- applied patch by Robb Canfield <robb@canfield.com>,
which fixes a bug in the variable interpolation
scheme. It did not interpolate blocks nor
blocknames. This patch fixes this. Patch slightly
modified by me(interpolation on block and blocknames).
- enhanced test for variable interpolation to
reflect this.
- added check if a named block occurs after the underlying
block is already an array, which is not possible.
perl cannot add a hashref to an array. i.e.:
<bl>
a = 1
</bl>
<bl>
b = 1
</bl>
<bl blubber>
c = 1
</bl>
As you can see, "<bl>" will be an array, and "blubber"
cannot be stored in any way on this array.
The module croaks now if such construct occurs.
2.14 - fixed bug reported by Francisco Olarte Sanz
<folarte@peoplecall.com>, which caused _parse to
ignore blocks with the name "0":
<0> .. </0>, because it checked just if $block (the name
between < and >) is true, and from the perl point
of view "0" is not. Changed it to check for defined.
Normally I avoid using 'defined' but in this case
it will not be possible that $block contains the
empty string, so defined is ok here.
2.13 - fixed bug reported by Steffen Schwigon <schwigon@webit.de>.
the parser was still active inside a here-doc, which
cause weird results if the here-doc contained
multiple <<XXX strings.
this bug has been fixed by re-organizing the _read()
method. now the parser is only active outside of
here-docs.
- here-doc parsing bug fixed, which ignored the
-SplitPolicy settings completely, now it is aware
of the split policy
2.12 - fixed cpan bugid #1768, stuff inside a hash given
by the -DefaultConfig parameter was ignored by
the new interpolation code, this has been fixed.
- fixed another bug in the new interpolation code,
which made variable global, the variable scope
were ignored. Now a special constructed hash
exists, which makes sure, that variables only
valid within its correct scope.
2.11 - heavy change in the variable interpolation code.
Peter Sergeant <pete@clueball.com> reported this
mis-behavior. The problem was that the whole hash
was feeded to ::Interpolated.pm, but as we all
know, perl hashes doesn't preserve the order. So,
in our case the module sometimes was unable to
resolve variablenames, because they were stored
in a different location as it occured in the config.
The change is, that Config::General now calls
::Interpolate.pm (new sub: _interpolate()) itself
directly on a per-key/value pair basis. The internal
varstack is now stored on $this globally. So, now
a variable will be known when it occurs. period :-)
2.10 - added -StrictVars documentation section to the POD,
which was missing.
- fixed a formatting error in the POD documentation.
2.09 - added bugfix in '#' comment parsing. If current state
was within a block, then /^ #/ was not ignored as
comment but instead added as variable. Reported by
Lupe Christoph <lupe@lupe-christoph.de>
- added -StrictObjects parameter support in the following
::Extended methods: hash() and value().
- added better parameter checks in the ::Extended::obj()
method. Its now no more possible to create a new (sub-)
object from an undefined key or a key which does not
point to a hash reference.
- simplified storing of ConfigFile and ConfigHash in new()
removed my variable $configfile.
- the original parameter list will now be saved, which is
required for ::Extended to create new objects with the
same config as their parents.
2.08 - added option -StrictVars, which causes Interpolate.pm to
ignore undefined variables and replaces such occurences
with the emppty string.
- applied patch by Stefan Moser <sm@open.ch>, which fixes
some weird bevavior if -MergeDuplicateOptions was turned
on, the parser croaked regardless -MergeDuplicateBlocks
was set or not. Now the two options behave almost independent
from each other, which allows one to merge duplicate
blocks but duplicate options not.
- changed behavior of setting -MergeDuplicateOptions which
implied in previous versions -AllowMultiOptions to be
false. Now this will only be done if the user does not
set -AllowMultiOptions by himself. This allows one to
have duplicate blocks which will be turned into an
array but duplicate options to be merged.
- applied patch by Matthias Pitzl <matthias@izb.net>, which
fixes a bug at parsing apache-like include directive
(Include ...). It did not properly trim unnecessary whitespaces
so that the filename to be included became invalid. This
bug espessially occurred if one saved a hash containing
a key/value pair like this: "Include" => "/etc/grs.cfg",
which was then saved as "Include /etc/grs.cfg", the
parser returned " /etc/grs.cfg" which, of course, does
not exists. odd...
2.07 - fixed cpan bugid #1351, SaveConfig contained a deprecated
function call which caused the module to croak.
- added feature request, if in extended mode (OOP turned
on with -ExtendedAccess => 1 access to non-existent keys
caused a croak. While this is still the default behavior
it is now possible to turn this off using -StrictObjects => 0.
- added this to the related pod section in ::Extended.
- fixed bug in new() which caused a couple of errors
if the ConfigFile parameter is not set, or is set to
undef. In this case it will now simply create an empty
object.
- fixed related bug in save_file() which will save "" to
a file now if the config is uninitialized (i.e. the case
mentioned below arrived).
2.06 - added -SplitPolicy, -SplitDelimiter and -StoreDelimiter
- removed whitespace support in keys in the default parser
SplitPolicy 'guess', which was introduced in 2.02. Now
I (re-)use the old regex I used before. if you need
whitespaces in keys, use 'equalsign' as SplitPolicy.
- the write_scalar() method uses the StoreDelimiter for
separating options from values.
- added -CComments to make it possible to turn c-comment
parsing off.
- added support for FileHandle objects as parameter to the
-ConfigFile parameter. This makes it possible to use locking.
2.05 - fixed bug in ::Extended. It exported for some weird
reason I cant remember all of its methods. This included
keys() exists() and delete(), which are perl internals.
If one used keys() on a normal hash, then the ::Extended
own keys() were used instead of perls own one. I removed
the export line.
2.04 - added RFE from rt.cpan.org (ID: 1218). the ::Interpolate
module populates now uses of uninitialized variables in
config files itself instead of just letting perl die().
The other suggestion of the RFE was declined.
2.03 - fixed bug in the _parse() routine (better: design flaw).
after the last patch for allowing whitespaces in
option names, it had a problem with here-docs which
contained equal signs. option/value splitting resulted
in weird output.
- as a side effect of the bug fix below it is now
possible to use equal signs inside quoted values, which
will then be ignored, thus not used for splitting
the line into an option/value assignment.
- added a new test, which tests for all possible notations
of option/value lines.
2.02 - added patch by Jens Heunemann, which allows to use
whitespaces in option names.
- changed the save() calls in the test script (t/run.t)
to save_file()
- removed new() from ::Interpolated and ::Extended.
This may break existing code (they will need to
move to the flags of Config::General::new() ), but
this decision must be made. The problem was that
both the old way of directly using the subclasses
and the enw way did not work together. So, now
subclasses are only method holders and used by
Config::General on request. Direct use of subclasses
is prohibited. (you receive a warning if you do).
2.01 - added -ConfigFile (in replace for -file) and
-ConfigHash (in replace for -hash) to get a consistent
parameter naming scheme. The old names are still
supported for backward compatibility, but no more
documented.
- the parameter -BaseHash has been dropped because
-DefaultConfig already has the capabilities of
defining a custom backing hash. The pod section for
-DefaultConfig has been enhanced to reflect this.
- README changed something. Removed the 'small' keyword,
because the module isn't really small anymore :-)
At least IMHO.
2.00 - fixed a bug in the ::Extended::keys() method, which
caused a beloved "use of uninitialized ..." message.
Reported by Danial Pearce <danial@infoxchange.net.au>.
- Removed all deprecated methods (in fact, they are still
there for shouting out a warn that its deprecated. But
the pod sections are removed. These are NoMultiOptions()
and save().
- added two new parameters to new(): -InterPolateVars and
-ExtendedAccess, which allows one to use the functionalites
of the supplied submodules without the need to decide
for one of them. This makes it possible to use variable
interpolation and oop access in the same time. Suggested
by Jared Rhine <jared@wordzoo.com>.
- added new parameter -BaseHash which makes it possible
to supply your own hash which stores the parsed contents
of the config. This can be a tied hash o the like.
Suggested by Jared Rhine <jared@wordzoo.com> too.
- switched to release 2.00 because the above is a major
change.
1.36 - simplified new() parameter parsing, should be now a little
bit better to understand.
- added new parameter -DefaultConfig, which can hold a hashref
or a string, which will be used to pre-define values
of the resulting hash after parsing a config.
Thanks to Mark Hampton <mark.hampton@qualis.com> for the
suggestion.
- added new parameter -MergeDuplicateOptions, which allows
one to overwrite duplicate options, which is required,
if you turn on -DefaultConfig, because otherwise a
array would be created, which is probably not what you
wanted.
- added patch by Danial Pearce <danial@infoxchange.net.au>
to Config::General::Extended::keys(), which allows to
retrieve the keys of the object itself (which was not
directly possible before)
- added patch by Danial Pearce <danial@infoxchange.net.au>
to Config::General::Extended::value(), which allows to
set a value to a (perlish-) nontrue value. This was a
bug.
- added patch by Danial Pearce <danial@infoxchange.net.au>
to Config::General::_parse_value, which fixes a bug in
this method, which in prior versions caused values of
"0" (zero digit) to be wiped out of the config.
- added tests in t/run.t for the new default config feature.
1.35 - the here-doc identifier in saved configs will now created
in a way which avoids the existence of this identifier
inside the here-doc, which if it happens results in
weird behavior in the resulting config.
1.34 - Danial Pearce <danial@infoxchange.net.au> reported a bug
in _store(), which caused the module to create scalar
entries even if the entry contained newlines. While
Danial supplied a patch to fix this - thx(TM) - I
did not apply it, because I "outsourced" this kind of
stuff to the subroutine _write_scalar(), see next.
- added internal methods _write_scalar() and _write_hash()
to simplify _store(), which did the same thing more
than once, which is a good time to create a sub which
does the job.
- fixed cut'n paste bug in General/Extended.pm reported by
Danial Pearce <danial@infoxchange.net.au>, which caused
Config::General::Extended::is_scalar() to return true even
when the key you pass in is an array.
- added new method Config::General::Extended::delete() suggested
by Danial Pearce <danial@infoxchange.net.au>, which deletes
the given key from the config.
1.33 - fixed bug in _parse_value() which caused perl to complain
with "Use of uninitialized value in..." if a value was
empty.
1.32 - *argl* ... I forgot Interpolated.pm, don't know how that
could happen, in 1.29 it was "lost". However -
I added it again now.
- added patch by Peder Stray <peder@linpro.no> to
the _store() method, which makes it possible to catch
arrays of hashes to be stored correctly.
- cleaned up the t/run.t testscript to reflect the
changes (in fact I did not touch it since 1.18 or so).
- added test number 16 to test variable interpolation
using ::Interpolated in t/run.t.
- fixed bug with new() parameter -AllowMultiOptions which
generated a croak() if set to something other than "no".
- changed Extended::save() to reflect the API change,
it calls now save_file().
1.31: - i'm such a moron ... I forgot to do a make clean
in 1.30, pf. So this is 1.31, which is clean.
1.30: - fixed typo, which made 1.29 unusable (undefined var %config)
- added code to check if unknown parameters to new()
has been supplied.
1.29:
- added 2 procedural functions ParseConf and SaveConf
- added new parameters -AutoTrue and -FlagBits
- added save_file() which replaces save(), which was
weird implemented. If the user only supplied a hash
as parameter to save(), then the first key was
used as the filename and the rest was used
as a config hash (which was then of an uneven size).
- save_file() takes now instead of a hash a hash-ref
and a filename. And the hashref is optional, since
the object already contains a complete hash.
- new method save_string() added, which returns the
ready generated string instead of writing it to
disk. The user can then save it himself.
- POD updated.
1.28:
- added contributed sub module Config::General::Interpolated
by "Wei-Hon Chen" <plasmaball@pchome.com.tw> with
help from "Autrijus Tang" <autrijus@autrijus.org>
which makes it possible to use variables inside
config files.
- _read() accepts now c-comments inside c-comments if
they are on a single line.
- _read() is now more tolerant to here-identifiers
(the ends of here-docs), whitespaces right after
such an identifier are allowed (i.e. "EOF ").
- _read() does now behave somewhat different with
C-comments, they will be the first thing being
processed in a config, so the parser really
ignores everything inside C-comments. Previously
it did not do that, for example here-docs has
not been ignored.
1.27: - "make test" complained about uninitialized value
in :146, which is now fixed.
1.26: - added filehandle capability to -file.
- added -String parameter to new(), which allows
one to supply the whole config as a string.
- added -MergeDuplicateBlocks option, which causes
duplicate blocks to be merged.
1.25: - include statements are now case insensitive
- include statements may now also being used with
indentation(leading and following whitespaces are
allowed)
- changed the end here-doc regexp from .+? to \S+?
so " <<include..." works as expected (this was a bug, imo)
- added new option -IncludeRelative (idea contributed
by Valerio_Valdez Paolini <paolini@students.cs.unibo.it>
and Anton Luht <luht@ank.ru> :-)
This allows to include files from the location of
the configfile instead from the working directory.
1.24: - AllowMultiOptions printed out the value and not the
option itself, if more than one of this particular
option occured.
- added -UseApacheInclude feature, contributed by
Thomas Klausner <domm@zsi.at>
- fixed bug with multiple options stuff, which did not
work with blocks or named blocks. Pointed out by
Thomas Klausner <domm@zsi.at>, who meant it being
feature request, but in fact it was a bug (IMHO).
- Config::General does now contain also it's OO-sister
Config::General::Extended, which is from now on
no more available as an extra module, because it
lived a shadowy existence.
- finally(!) created a Changelog file (this one, yes).
1.23: - fixed bug, which removed trailing or leading " even
no matching " was there.
1.22: - added a new option to new(): -LowerCaseNames, which
lowercases all option-names (feature request)
1.21: - lines with just one "#" became an option array named
"#" with empty entries, very weird, fixed
1.20: - added an if(exists... to new() for checking of the
existence of -AllowMultiOptions.
- use now "local $_" because it caused weird results
if a user used $_ with the module.
1.19: - you can escape "#" characters using a backslash: "\#"
which will now no more treated as a comment.
- comments inside here-documents will now remain in the
here-doc value.
history logs 1.17+1.18 are lost in space :-(
older history logs (stripped from CVS):
revision 1.16
date: 2000/08/03 16:54:58; author: jens; state: Exp; lines: +4 -1
An jedes File eine Sektion
# Local Variables: ***
# perl-master-file: ../../webmin/index.pl ***
# End: ***
rangehängt, damit ich mit C-c d das debugging von jedem File aus
einschalten kann
(siehe mein .emacs file)
----------------------------
revision 1.15
date: 2000/08/01 09:12:52; author: tom; state: Exp; lines: +57 -68
added comments to _open() and _parse()
----------------------------
revision 1.14
date: 2000/07/31 18:07:12; author: tom; state: Exp; lines: +44 -19
added <<include ... >> capability
----------------------------
revision 1.13
date: 2000/07/16 18:35:33; author: tom; state: Exp; lines: +135 -10
added here-doc and multi-line feature, updated perlpod
----------------------------
revision 1.12
date: 2000/07/14 14:56:09; author: tom; state: Exp; lines: +2 -2
bug fixed, it did not ignore options inside c-comments with a # comment
@ the end of line
----------------------------
revision 1.11
date: 2000/07/14 11:26:04; author: tom; state: Exp; lines: +42 -6
added C-Style comments and allow also comments after a statement.
----------------------------
revision 1.10
date: 2000/07/12 14:04:51; author: tom; state: Exp; lines: +2 -1
i woas ned
----------------------------
revision 1.9
date: 2000/07/12 10:59:53; author: jens; state: Exp; lines: +5 -3
hehe :)
----------------------------
revision 1.8
date: 2000/07/12 10:43:20; author: tom; state: Exp; lines: +5 -2
fixed bug in getall(), which doubled %config if called more than onse.
----------------------------
revision 1.7
date: 2000/07/12 09:09:33; author: tom; state: Exp; lines: +22 -24
100% Apache Config complete ;-) it supports now "named blocks"!
----------------------------
revision 1.6
date: 2000/07/11 23:43:03; author: tom; state: Exp; lines: +72 -19
added named block support (<server holland>)
----------------------------
revision 1.5
date: 2000/07/11 20:49:47; author: tom; state: Exp; lines: +2 -2
typo in pod corrected
----------------------------
revision 1.4
date: 2000/07/11 17:07:04; author: tom; state: Exp; lines: +61 -7
a config file can now contain an option more than once and will be
returned as array
----------------------------
revision 1.3
date: 2000/07/07 11:27:38; author: cvs; state: Exp; lines: +2 -2
folgende Parameterform geht jetzt auch:
parameter= blabla
vorher musste man
parameter = blabla
schreiben
----------------------------
revision 1.2
date: 2000/07/04 13:21:12; author: tom; state: Exp; lines: +9 -4
added better failurehandling in case of missing block start/end statements
----------------------------
revision 1.1
date: 2000/07/04 12:52:09; author: tom; state: Exp;
implemented module and method getall, works as expected.