fatpack-modules - Generate source code that contains fatpacked modules
This document describes version 0.121 of fatpack-modules (from Perl distribution App-FatPackUtils), released on 2020-04-30.
Usage:
% fatpack-modules [--add-begin-block] [--assume-strict] [--config-path=path | -c] [--config-profile=profile | -P] [--format=name] [--json] [--line-prefix=s] [-m=s+] [--module-name=s+] [--module-names-json=s] [--module-src key=s] [--module-srcs-json=s] [--(no)naked-res] [--no-add-begin-block] [--no-assume-strict] [--no-config | -C] [--no-env] [--no-overwrite] [--no-stripper] [--no-stripper-comment] [--no-stripper-log] [--no-stripper-maintain-linum] [--no-stripper-pod] [--no-stripper-ws] [--noadd-begin-block] [--noassume-strict] [--nooverwrite] [--nostripper] [--nostripper-comment] [--nostripper-log] [--nostripper-maintain-linum] [--nostripper-pod] [--nostripper-ws] [-o=s] [--output=s] [--overwrite] [--page-result[=program]] [--pm] [--postamble=s] [--preamble=s] [--put-hook-at-the-end] [--stripper] [--stripper-comment] [--stripper-log] [--stripper-maintain-linum] [--stripper-pod] [--stripper-ws] [module_name] ...
Examples:
Fatpack two modules:
% fatpack-modules Text::Table::Tiny Try::Tiny
This routine provides the same core technique employed by App::FatPacker (which is putting modules' source code inside Perl variables and loading them on-demand via require hook) without all the other stuffs. All you need is supply the names of modules (or the modules' source code themselves) and you'll get the output in a file or string.
App::FatPacker
* marks required options.
*
Surround the code inside BEGIN { }.
Assume code runs under stricture.
Make code suitable to put inside .pm file instead of script.
This setting adjusts the code so it is suitable to put one or several instances of the code inside one or more .pm files. Also sets default for --line-prefix '#' --no-add-begin-block --put-hook-at-the-end.
Put the require hook at the end of @INC using "push" instead of at the front using "unshift".
Set path to configuration file.
Set configuration profile to use.
Do not use any configuration file.
Do not read environment for default options.
Module names to search.
Can be specified multiple times.
Module names to search (JSON-encoded).
See --module-name.
--module-name
Module source codes (a hash, keys are module names).
Each value is a name-value pair, use key=value syntax. Can be specified multiple times.
Module source codes (a hash, keys are module names) (JSON-encoded).
See --module-src.
--module-src
Perl source code to add after the fatpack code.
Perl source code to add before the fatpack code.
Choose output format, e.g. json, text.
Default value:
undef
Set output format to json.
When outputing as JSON, strip result envelope.
0
By default, when outputing as JSON, the full enveloped result is returned, e.g.:
[200,"OK",[1,2,3],{"func.extra"=>4}]
The reason is so you can get the status (1st element), status message (2nd element) as well as result metadata/extra result (4th element) instead of just the result (3rd element). However, sometimes you want just the result, e.g. when you want to pipe the result for more post-processing. In this case you can use `--naked-res` so you just get:
[1,2,3]
Output filename.
Overwrite output if previously exists.
Filter output through a pager.
Set strip_comment=0 (don't strip comments) in Perl::Stripper.
Set strip_pod=0 (don't strip POD) in Perl::Stripper.
Set strip_ws=0 (don't strip whitespace) in Perl::Stripper.
Strip included modules using Perl::Stripper.
Set strip_log=1 (strip log statements) in Perl::Stripper.
Set maintain_linum=1 in Perl::Stripper.
Display help message and exit.
Display program's version and exit.
This script has shell tab completion capability with support for several shells.
To activate bash completion for this script, put:
complete -C fatpack-modules fatpack-modules
in your bash startup (e.g. ~/.bashrc). Your next shell session will then recognize tab completion for the command. Or, you can also directly execute the line above in your shell to activate immediately.
It is recommended, however, that you install modules using cpanm-shcompgen which can activate shell completion for scripts immediately.
To activate tcsh completion for this script, put:
complete fatpack-modules 'p/*/`fatpack-modules`/'
in your tcsh startup (e.g. ~/.tcshrc). Your next shell session will then recognize tab completion for the command. Or, you can also directly execute the line above in your shell to activate immediately.
It is also recommended to install shcompgen (see above).
For fish and zsh, install shcompgen as described above.
This script can read configuration files. Configuration files are in the format of IOD, which is basically INI with some extra features.
By default, these names are searched for configuration filenames (can be changed using --config-path): ~/.config/fatpack-modules.conf, ~/fatpack-modules.conf, or /etc/fatpack-modules.conf.
--config-path
All found files will be read and merged.
To disable searching for configuration files, pass --no-config.
--no-config
You can put multiple profiles in a single file by using section names like [profile=SOMENAME] or [SOMESECTION profile=SOMENAME]. Those sections will only be read if you specify the matching --config-profile SOMENAME.
[profile=SOMENAME]
[SOMESECTION profile=SOMENAME]
--config-profile SOMENAME
You can also put configuration for multiple programs inside a single file, and use filter program=NAME in section names, e.g. [program=NAME ...] or [SOMESECTION program=NAME]. The section will then only be used when the reading program matches.
program=NAME
[program=NAME ...]
[SOMESECTION program=NAME]
Finally, you can filter a section by environment variable using the filter env=CONDITION in section names. For example if you only want a section to be read if a certain environment variable is true: [env=SOMEVAR ...] or [SOMESECTION env=SOMEVAR ...]. If you only want a section to be read when the value of an environment variable has value equals something: [env=HOSTNAME=blink ...] or [SOMESECTION env=HOSTNAME=blink ...]. If you only want a section to be read when the value of an environment variable does not equal something: [env=HOSTNAME!=blink ...] or [SOMESECTION env=HOSTNAME!=blink ...]. If you only want a section to be read when an environment variable contains something: [env=HOSTNAME*=server ...] or [SOMESECTION env=HOSTNAME*=server ...]. Note that currently due to simplistic parsing, there must not be any whitespace in the value being compared because it marks the beginning of a new section filter or section name.
env=CONDITION
[env=SOMEVAR ...]
[SOMESECTION env=SOMEVAR ...]
[env=HOSTNAME=blink ...]
[SOMESECTION env=HOSTNAME=blink ...]
[env=HOSTNAME!=blink ...]
[SOMESECTION env=HOSTNAME!=blink ...]
[env=HOSTNAME*=server ...]
[SOMESECTION env=HOSTNAME*=server ...]
List of available configuration parameters:
add_begin_block (see --add-begin-block) assume_strict (see --assume-strict) format (see --format) line_prefix (see --line-prefix) module_names (see --module-name) module_srcs (see --module-src) naked_res (see --naked-res) output (see --output) overwrite (see --overwrite) pm (see --pm) postamble (see --postamble) preamble (see --preamble) put_hook_at_the_end (see --put-hook-at-the-end) stripper (see --stripper) stripper_comment (see --no-stripper-comment) stripper_log (see --stripper-log) stripper_maintain_linum (see --stripper-maintain-linum) stripper_pod (see --no-stripper-pod) stripper_ws (see --no-stripper-ws)
Specify additional command-line options.
~/.config/fatpack-modules.conf
~/fatpack-modules.conf
/etc/fatpack-modules.conf
Please visit the project's homepage at https://metacpan.org/release/App-FatPackUtils.
Source repository is at https://github.com/perlancar/perl-App-FatPackUtils.
Please report any bugs or feature requests on the bugtracker website https://rt.cpan.org/Public/Dist/Display.html?Name=App-FatPackUtils
When submitting a bug or request, please include a test-file or a patch to an existing test-file that illustrates the bug or desired feature.
perlancar <perlancar@cpan.org>
This software is copyright (c) 2020, 2019, 2017, 2016, 2015 by perlancar@cpan.org.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.
To install App::FatPackUtils, copy and paste the appropriate command in to your terminal.
cpanm
cpanm App::FatPackUtils
CPAN shell
perl -MCPAN -e shell install App::FatPackUtils
For more information on module installation, please visit the detailed CPAN module installation guide.