NAME
Modem::Vgetty - interface to vgetty(8)
SYNOPSIS
use Modem::Vgetty;
$v = new Modem::Vgetty;
$string = $v->receive;
$v->send($string);
$string = $v->expect($str1, $str2, ...);
$v->waitfor($string);
$rv = $v->chat($expect1, $send1, $expect2, $send2, ...);
$ttyname = $v->getty;
$rv = $v->device($dev_type);
$rv = $v->autostop($bool);
$rv = $v->modem_type; # !!! see the docs below.
$rv = $v->beep($freq, $len);
$rv = $v->dial($number);
$rv = $v->play($filename);
$rv = $v->record($filename);
$rv = $v->wait($seconds);
$rv = $v->play_and_wait($filename);
$v->stop;
$v->add_handler($event, $handler_name, $handler);
$v->del_handler($event, $handler_name);
$v->enable_events;
$v->disable_events;
$number = $v->readnum($message, $tmout, $repeat);
$v->shutdown;
DESCRIPTION
Modem::Vgetty
is an encapsulation object for writing applications for voice modems using the vgetty(8) or vm(8) package. The answering machines and sofisticated voice applications can be written using this module.
OVERVIEW
Voice modem is a special kind of modem, which (besides the normal data and/or fax mode) can communicate also in voice mode. It means it can record sounds it hears from the phone line to the file, Play-back recorded files, it can beep to the line, and it can detect various standard sounds coming from the line (busy tone, silence, dual tone modulation frequency (DTMF) keypad tones, etc). An example of the voice modem can be the ZyXEL U1496, US Robotics Sportster (not Courier), etc.
To use this software with the voice modem you need to have the vgetty(8) package installed. Vgetty is distributed as a part of mgetty package. In fact, vgetty is a mgetty(8) with the voice extensions. Vgetty has some support for scripting - when it receives an incoming call, it runs a voice shell (it is program specified in the voice.conf file) as its child process, establishes the read and write pipes to it, and tells it the number of the appropriate descriptors in the environment variables. Voice shell can now communicate with vgetty. It can tell vgetty "Play this file", or "Record anything you hear to that file", or "Notify me when user hangs up", etc. Sophisticated voice systems and answering machines can be build on top of vgetty.
mgetty (including the vgetty) is available at the following URL:
ftp://alpha.greenie.net/pub/mgetty/
Originally there was a (Bourne) shell interface to vgetty only. The Modem::Vgetty module allows user to write the voice shell in Perl. The typical use is to write a script and point the vgetty to it (in voice.conf file). The script will be run when somebody calls in. Another use is running voice shell from the vm(8) program, which can for example dial somewhere and say something.
QUICK START
#!/usr/bin/perl
use Modem::Vgetty;
my $v = new Modem::Vgetty;
$v->add_handler('BUSY_TONE', 'endh', sub { $v->stop; exit(0); });
local $SIG{ALRM} = sub { $v->stop; };
$v->enable_events;
$v->record('/tmp/hello.rmd');
alarm(20);
$v->waitfor('READY');
$v->shutdown;
The above example installs the simple `exit now'-style handler for the BUSY_TONE event (which is sent by vgetty when user hangs up) and then records the hello.rmd file. Put this text into a file and then point vgetty to it in the voice.conf. After you dial into your voice modem, you can record a 20-seconds of some message. Verify that /tmp/hello.rmd exists. Now delete the line contaning the word "record" and two subsequent lines and insert to the file the following line instead of them:
$v->play_and_wait('/tmp/hello.rmd');
Now call the voice modem and listen to the sounds you have just recorded.
METHODS
Begin and end of communication
The Modem::Vgetty object will initialize the communication pipes to the vgetty at the creation time - in the constructor. The closing of the communication is done via the shutdown method:
$v->shutdown;
The module will call this method itself from the destructor, if you do not call it explicitly.
Low-level communication
Users probably don't want to use these methods directly. Use the higher-level functions instead.
- receive
-
This method returns a string received from the vgetty. It parses the string for the event types and runs appropriate event handlers. If event handler is run it waits for another string.
- send($string)
-
This method sends the string $string to the vgetty process.
- expect($string1, $string2, ...)
-
Receives a string from vgetty (using the receive method described above) and returns it iff it is equal to one of the strings in the argument list. When something different is received, this method returns undef.
- waitfor($string)
-
Waits until the string $sring is received from vgetty (using the receive method described above). =item chat($expect1, $sent1, $expect2, $sent2, ...)
A chat-script with vgetty. Arguments are interpreted as the received-sent string pairs. A received string equals to the empty string means that no receive method will be called at that place. This can be used for constructing chat scripts beginning with the sent string instead of the received one.
Vgetty control methods
There are miscellaneous methods for controllig vgetty and querying its status.
- getty
-
Returns the name of the modem special file (e.g. /dev/ttyC4).
- device($name)
-
Sets the port of the voice modem input and output is done to. Possible values are qw(NO_DEVICE DIALUP_LINE EXTERNAL_MICROPHONE INTERNAL_SPEAKER LOCAL_HANDSET).
- autostop($bool)
-
With autostop on, the voicelib will automatically abort a play in progress and return READY. This is useful for faster reaction times for voice menus. Possible arguments are qw(ON OFF). Note: The interface should probably be changed to accept the Perl boolean arguments (undef, something else). Returns defined value on success, undef on failure.
- modem_type
-
vgetty currently has no way of telling voice shell the type of the current modem. This method is a proposed interface for determining this type. Currently returns undef. The appropriate low-level interface has to be implemented in vgetty first.
Voice commands
- beep($freq, $len)
-
Sends a beep through the chosen device using given frequency (HZ) and length (in miliseconds). Returns a defined value on success or undef on failure. The state of the vgetty changes to "BEEPING" and vgetty returns "READY" after a beep is finshed. Example:
$v->beep(50,10); # Possibly do something else $v->waitfor('READY');
- dial($number)
-
Modem tries to dial a given number. The vgetty changes its state to "DIALING" and returns "READY" after the dialing is finished.
- play($filename)
-
The vgetty tries to play the given file as a raw modem data. See the "Voice data" section for details on creating the raw modem data file. It changes the state to "PLAYING" and returns "READY" after playing the whole file.
- record($filename)
-
The vgetty records the voice it can hear on the line to the given file. It uses the raw modem data format (which can be re-played using the play subroutine). vgetty changes its state to "RECORDING" and you need to manually stop the recording using the stop method after some time (or, you can set autostop and wait for any event - silence, busy tone, etc).
- wait($seconds)
-
The modem waits for a given number of seconds. Changes its state to "WAITING" and returns "READY" after the wait is finished. Example:
$v->wait(5); $v->waitfor('READY');
- stop
-
The vgetty stops anything it is currently doing and returns to the command state. You must use stop when you want to call another beep, dial, play, record or wait before the previous one is finished. The vgetty returns "READY" after the stop is called. So it is possible to interrupt a main routine waiting for "READY" from the event handler:
my $dtmf; $v->add_handler('RECEIVED_DTMF', 'readnum', sub { my $self=shift; $self->stop; $dtmf = $_[2]; }); $v->enable_events; $v->wait(10); $v->waitfor('READY');
In the previous example the waitfor method can be finished either by the 10-second timeout expired, or by the 'READY' generated by the stop in the event handler. See also the Events section.
- play_and_wait($file)
-
It is an abbreviation for the following:
$v->play($file); $v->waitfor('READY');
It is repeated so much time in the voice applications so I have decided to make a special routine for it. I may add the similar routines for dial, record, beep and even wait in the future releases.
Event handler methods
- add_handler($event, $handler_name, $handler)
-
Installs a call-back routine $handler for the event type $event. The call-back routine is called with three arguments. The first one is the Modem::Vgetty object itself, the second one is the event name and the third one is optional event argument. The $handler_name argument can be anything. It is used when you want to delete this handler for identificating it.
- del_handler($event, $handler_name)
-
This method deletes the handler $handler_name for the $event event. The result of unregistering the handler from the event handler of the same event is unspecified. It may or may not be called.
- enable_events
-
Tells the vgetty that the voice shell is willing to dispatch events. No events are sent by vgetty until this method is called.
- disable_events
-
Tells the vgetty that the voice shell doesn't want to receive any events anymore.
The readnum method
- readnum($message, $tmout, $repeat)
-
The applications often need to read the multi-digit number via the DTMF tones. This routine plays the $message to the voice object and then waits for the sequence of the DTMF keys finished by the `#' key. If no key is pressed for $tmout of seconds, it re-plays the message again. It returns failure if no key is pressed after the message is played $repeat-th time. It returns a string (a sequence of DTMF tones 0-9,A-D and `*') without the final `#'. When some DTMF tones are received and no terminating `#' or other tone is received for $tmout seconds, the routine returns the string it currently has without waiting for the final '#'. DTMF tones are accepted even at the time the $message is played. When the DTMF tone is received, the playing of the $message is (with some latency, of course) stopped.
NOTE: The interface of this routine can be changed in future releases, because I am not (yet) decided whether the current interface is the best one. See also the EXAMPLES section where the source code of this routine (and its co-routine) is discussed.
EVENTS
Introduction
Events are asynchronous messages sent by vgetty to the voice shell. The Modem::Vgetty module dispatches events itself in the receive method. User can register any number of handlers for each event. When an event arrives, all handlers for that event are called (in no specified order).
Event types
At this time, the Modem::Vgetty module recognizes the following event types (description is mostly re-typed from the vgetty documentation):
- BONG_TONE
-
The modem detected a bong tone on the line.
- BUSY_TONE
-
The modem detected busy tone on the line (when dialing to the busy number or when caller finished the call).
- CALL_WAITING
-
Defined in IS-101 (I think it is when the line receives another call-in when some call is already in progress. -Yenya).
- DIAL_TONE
-
The modem detected dial tone on the line.
- DATA_CALLING_TONE
-
The modem detected data calling tone on the line.
- DATA_OR_FAX_DETECTED
-
The modem detected data or fax calling tones on the line.
- FAX_CALLING_TONE
-
The modem detected fax calling tone on the line.
- HANDSET_ON_HOOK
-
Locally connected handset went on hook.
- HANDSET_OFF_HOOK
-
Locally connected handset went off hook.
- LOOP_BREAK
-
Defined in IS-101.
- LOOP_POLARITY_CHANGE
-
Defined in IS-101.
- NO_ANSWER
-
After dialing the modem didn't detect answer for the time give in dial_timeout in voice.conf.
- NO_DIAL_TONE
-
The modem didn't detect dial tone (make sure your modem is connected properly to your telephone company's line, or check the ATX command if dial tone in your system differs from the standard).
- NO_VOICE_ENERGY
-
It means that the modem detected voice energy at the beginning of the session, but after that there was a period of some time of silence (the actual time can be set using the rec_silence_len and rec_silence_treshold parameters in voice.conf).
- RING_DETECTED
-
The modem detected an incoming ring.
- RINGBACK_DETECTED
-
The modem detected a ringback condition on the line.
- RECEIVE_DTMF
-
The modem detected a dtmf code. The actual code value (one of 0-9, *, #, A-D) is given to the event handler as the third argument.
- SILENCE_DETECTED
-
The modem detected that there was no voice energy at the beginning of the session and after some time of silence (the actual time can be set using the rec_silence_len and rec_silence_treshold parameters in voice.conf).
- SIT_TONE
-
Defined in IS-101.
- TDD_DETECTED
-
Defined in IS-101.
- VOICE_DETECTED
-
The modem detected a voice signal on the line. IS-101 does not define, how the modem makes this decision, so be careful.
- UNKNOWN_EVENT
-
None of the above :)
VOICE DATA
Voice shell can send the voice data to the modem using the play method and record them using the record method. The ".rmd" extension (Raw Modem Data) is usually used for these files. The ".rmd" is not a single format - every modem has its own format (sampling frequency, data bit depth, etc). There is a pvftools package for converting the sound files (it is a set of filters similar to the netpbm for image files). The pvftormd(1) filter can be used to create the RMD files for all known types of modems.
EXAMPLES
Answering machine
A simple answering machine can look like this:
#!/usr/bin/perl
use Modem::Vgetty;
my $voicemaster = 'root@localhost';
my $tmout = 30;
my $finish = 0;
my $v = new Modem::Vgetty;
$v->add_handler('BUSY_TONE', 'finish',
sub { $v->stop; $finish=1; });
$v->add_handler('SILENCE_DETECTED', 'finish',
sub { $v->stop; $finish=1; });
local $SIG{ALRM} = sub { $v->stop; };
$v->enable_events;
$v->play_and_wait('/path/welcome.rmd');
$v->beep(100,10);
$v->waitfor('READY');
if ($finish == 0) {
my $num = 0;
$num++ while(-r "/path/$num.rmd");
$v->record("/path/$num.rmd");
alarm $tmout;
$v->waitfor('READY');
}
system "echo 'Play with rmdtopvf /path/$num.rmd|pvftoau >/dev/audio'" .
" | mail -s 'New voice message' $voicemaster";
exit 0;
See the examples/answering_machine.pl in the source distribution, which contains a more configurable version of the above text. It first sets the event handlers for the case of busy tone (the caller hangs up) or silence (the caller doesn't speak at all). The handler stops vgetty from anything it is currently doing and sets the $finish variable to 1. Then the reception of the events is enabled and the welcome message is played. Then the answering machine beeps and starts to record the message. Note that we need to check the $finish variable before we start recording to determine if user hanged up the phone. Now we find the first filename <number>.rmd such that this file does not exist and we start to record the message to this file. We record until user hangs up the phone or until the timeout occurs.
Readnum routine
An interesting application of the low-level routines is the Voice::Modem::readnum method. The calling sequence of this method has been discussed above. The source code for this routine and its co-routine will be discussed here, so that you can write your own variants of readnum (which in fact does not have too general interface). See also the source code of Vgetty.pm for the readnum source.
The readnum routine needs to have its own event handler for the RECEIVED_DTMF event and the way the handler can communicate with this routine. In our solution we use "static" variables:
my $_readnum_number = '';
my $_readnum_timeout = 10;
my $_readnum_in_timeout = 1;
The event handler will add the new character to the end of the $_readnum_number variable. The $_readnum_timeout is the number of seconds both readnum and the event handler should wait for the next keypress, and the $_readnum_in_timeout is a flag used by the event handler for notifying the main readnum routine that it forced the vgetty to emit the `READY' message because of the final `#' has been received.
sub _readnum_event {
my $self = shift;
my $input = shift; # Unused. Should be 'RECEIVED_DTMF'.
my $dtmf = shift;
if ($dtmf eq '#') { # Stop the reading now.
$_readnum_in_timeout = 0;
$self->stop;
$self->{LOG}->print("_readnum_event(): Got #; stopping\n");
return;
}
$_readnum_number .= $dtmf;
$self->stop;
$self->expect('READY');
# Restart the wait again.
$_readnum_in_timeout = 1;
$self->wait($_readnum_timeout);
}
The event handler is installed for the `RECEIVED_DTMF' event only, so it doesn't need to check for the $input value. The actual DTMF key is in the third parameter, $dtmf. Note that the handler will be called when vgetty is PLAYING or WAITING and the readnum routine will be waiting for the `READY' message. This allows us to immediately interrupt waiting by the $self-stop> (which emits the `READY' message). So when the `#' DTMF tone is received, we send a stop to vgetty. If something else is received, we stop the vgetty too but we enter a new wait using $self-wait>.
sub readnum {
my $self = shift;
my $message = shift;
my $timeout = shift;
my $times = shift;
$_readnum_number = '';
$_readnum_in_timeout = 1;
$_readnum_timeout = $timeout if $timeout != 0;
$times = 3 if $times == 0;
# Install the handler.
$self->add_handler('RECEIVED_DTMF', 'readnum', \&_readnum_event);
while($_readnum_in_timeout != 0 && $_readnum_number eq ''
&& $times-- > 0) {
$self->play_and_wait($message);
last if $_readnum_in_timeout == 0;
while ($_readnum_in_timeout != 0) {
$self->wait($_readnum_timeout);
$self->expect('READY');
}
}
return undef if $times < 0;
$self->del_handler('RECEIVED_DTMF', 'readnum');
$self->stop;
$self->expect('READY');
$_readnum_number;
}
The readnum routine just sets up the event handler, then plays the $message and waits for the input (possibly several times). The main work is done in the event handler. At the end the handler is unregistered and the final value is returned.
Callme script
In the examples subdirectory of the source distribution there is a callme.pl script. This dials the given number and plays the given message. Use the following command to run it:
vm shell -S /usr/bin/perl callme.pl <number> <message>.rmd
BUGS
There may be some, but it will more likely be in the vgetty itself. On the other hand, there can be typos in this manual (English is not my native language) or some parts of the interface that should be redesigned. Feel free to mail any comments on this module to me.
TODO
- Modem type recognition
-
The vgetty should be able to tell the voice shell the name of the current modem type.
- The _wait() routines
-
I need to implement the routines similar to play_and_wait for other vgetty states as well.
- Debugging information
-
The module has currently some support for writing a debug logs (use the $Modem::Vgetty::testing = 1 and watch the /var/log/voicelog file). This needs to be re-done using (I think) Sys::Syslog. I need to implement some kind of log-levels, etc.
- Mgetty/Vgetty 1.1.17
-
Need to figure out what is new in 1.1.17 (I use 1.1.14 now). I think new vgetty can play more than one file in the single `PLAY' command, it (I think) have some support for sending voice data from/to the voice shell via the pipe, etc.
AUTHOR
The Modem::Vgetty package was written by Jan "Yenya" Kasprzak <kas@fi.muni.cz>. Feel free to mail me any suggestions etc. on this module. Module itself is available from CPAN, but be sure to check the following address, where the development versions can be found:
http://www.fi.muni.cz/~kas/vgetty/
COPYRIGHT
Copyright (c) 1998 Jan "Yenya" Kasprzak <kas@fi.muni.cz>. All rights reserved. This package is free software; you can redistribute it and/or modify it under the same terms as Perl itself.