The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.
 / 
Paws-0.46
River stage two • 9 direct dependents • 11 total dependents
57 ++
/ Paws::Route53::ChangeResourceRecordSets

NAME

Paws::Route53::ChangeResourceRecordSets - Arguments for method ChangeResourceRecordSets on Paws::Route53

DESCRIPTION

This class represents the parameters used for calling the method ChangeResourceRecordSets on the Amazon Route 53 service. Use the attributes of this class as arguments to method ChangeResourceRecordSets.

You shouldn't make instances of this class. Each attribute should be used as a named argument in the call to ChangeResourceRecordSets.

SYNOPSIS

    my $route53 = Paws->service('Route53');
    # To create a basic resource record set
    # The following example creates a resource record set that routes Internet
    # traffic to a resource with an IP address of 192.0.2.44.
    my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets(
      'ChangeBatch' => {
        'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.44'
                }
              ],
              'TTL'  => 60,
              'Type' => 'A'
            }
          }
        ],
        'Comment' => 'Web server for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

 # Returns a L<Paws::Route53::ChangeResourceRecordSetsResponse> object.
 # To create weighted resource record sets
 # The following example creates two weighted resource record sets. The resource
 # with a Weight of 100 will get 1/3rd of traffic (100/100+200), and the other
 # resource will get the rest of the traffic for example.com.
    my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets(
      'ChangeBatch' => {
        'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'HealthCheckId'   => 'abcdef11-2222-3333-4444-555555fedcba',
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.44'
                }
              ],
              'SetIdentifier' => 'Seattle data center',
              'TTL'           => 60,
              'Type'          => 'A',
              'Weight'        => 100
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'HealthCheckId'   => 'abcdef66-7777-8888-9999-000000fedcba',
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.45'
                }
              ],
              'SetIdentifier' => 'Portland data center',
              'TTL'           => 60,
              'Type'          => 'A',
              'Weight'        => 200
            }
          }
        ],
        'Comment' => 'Web servers for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

# Returns a Paws::Route53::ChangeResourceRecordSetsResponse object. # To create an alias resource record set # The following example creates an alias resource record set that routes traffic # to a CloudFront distribution. my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets( 'ChangeBatch' => { 'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName'              => 'd123rk29d0stfj.cloudfront.net',
                'EvaluateTargetHealth' => 0,
                'HostedZoneId'         => 'Z2FDTNDATAQYW2'
              },
              'Name' => 'example.com',
              'Type' => 'A'
            }
          }
        ],
        'Comment' => 'CloudFront distribution for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

  # Returns a L<Paws::Route53::ChangeResourceRecordSetsResponse> object.
  # To create weighted alias resource record sets
  # The following example creates two weighted alias resource record sets that
  # route traffic to ELB load balancers. The resource with a Weight of 100 will
  # get 1/3rd of traffic (100/100+200), and the other resource will get the rest
  # of the traffic for example.com.
    my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets(
      'ChangeBatch' => {
        'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-123456789.us-east-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z3AADJGX6KTTL2'
              },
              'Name'          => 'example.com',
              'SetIdentifier' => 'Ohio region',
              'Type'          => 'A',
              'Weight'        => 100
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-987654321.us-west-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z1H1FL5HABSF5'
              },
              'Name'          => 'example.com',
              'SetIdentifier' => 'Oregon region',
              'Type'          => 'A',
              'Weight'        => 200
            }
          }
        ],
        'Comment' => 'ELB load balancers for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

# Returns a Paws::Route53::ChangeResourceRecordSetsResponse object. # To create latency resource record sets # The following example creates two latency resource record sets that route # traffic to EC2 instances. Traffic for example.com is routed either to the Ohio # region or the Oregon region, depending on the latency between the user and # those regions. my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets( 'ChangeBatch' => { 'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'HealthCheckId'   => 'abcdef11-2222-3333-4444-555555fedcba',
              'Name'            => 'example.com',
              'Region'          => 'us-east-2',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.44'
                }
              ],
              'SetIdentifier' => 'Ohio region',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'HealthCheckId'   => 'abcdef66-7777-8888-9999-000000fedcba',
              'Name'            => 'example.com',
              'Region'          => 'us-west-2',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.45'
                }
              ],
              'SetIdentifier' => 'Oregon region',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          }
        ],
        'Comment' => 'EC2 instances for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

    # Returns a L<Paws::Route53::ChangeResourceRecordSetsResponse> object.
    # To create latency alias resource record sets
    # The following example creates two latency alias resource record sets that
    # route traffic for example.com to ELB load balancers. Requests are routed
    # either to the Ohio region or the Oregon region, depending on the latency
    # between the user and those regions.
    my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets(
      'ChangeBatch' => {
        'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-123456789.us-east-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z3AADJGX6KTTL2'
              },
              'Name'          => 'example.com',
              'Region'        => 'us-east-2',
              'SetIdentifier' => 'Ohio region',
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-987654321.us-west-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z1H1FL5HABSF5'
              },
              'Name'          => 'example.com',
              'Region'        => 'us-west-2',
              'SetIdentifier' => 'Oregon region',
              'Type'          => 'A'
            }
          }
        ],
        'Comment' => 'ELB load balancers for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

# Returns a Paws::Route53::ChangeResourceRecordSetsResponse object. # To create failover resource record sets # The following example creates primary and secondary failover resource record # sets that route traffic to EC2 instances. Traffic is generally routed to the # primary resource, in the Ohio region. If that resource is unavailable, traffic # is routed to the secondary resource, in the Oregon region. my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets( 'ChangeBatch' => { 'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'Failover'        => 'PRIMARY',
              'HealthCheckId'   => 'abcdef11-2222-3333-4444-555555fedcba',
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.44'
                }
              ],
              'SetIdentifier' => 'Ohio region',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'Failover'        => 'SECONDARY',
              'HealthCheckId'   => 'abcdef66-7777-8888-9999-000000fedcba',
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.45'
                }
              ],
              'SetIdentifier' => 'Oregon region',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          }
        ],
        'Comment' => 'Failover configuration for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

   # Returns a L<Paws::Route53::ChangeResourceRecordSetsResponse> object.
   # To create failover alias resource record sets
   # The following example creates primary and secondary failover alias resource
   # record sets that route traffic to ELB load balancers. Traffic is generally
   # routed to the primary resource, in the Ohio region. If that resource is
   # unavailable, traffic is routed to the secondary resource, in the Oregon
   # region.
    my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets(
      'ChangeBatch' => {
        'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-123456789.us-east-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z3AADJGX6KTTL2'
              },
              'Failover'      => 'PRIMARY',
              'Name'          => 'example.com',
              'SetIdentifier' => 'Ohio region',
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-987654321.us-west-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z1H1FL5HABSF5'
              },
              'Failover'      => 'SECONDARY',
              'Name'          => 'example.com',
              'SetIdentifier' => 'Oregon region',
              'Type'          => 'A'
            }
          }
        ],
        'Comment' => 'Failover alias configuration for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

  # Returns a L<Paws::Route53::ChangeResourceRecordSetsResponse> object.
  # To create geolocation resource record sets
  # The following example creates four geolocation resource record sets that use
  # IPv4 addresses to route traffic to resources such as web servers running on
  # EC2 instances. Traffic is routed to one of four IP addresses, for North
  # America (NA), for South America (SA), for Europe (EU), and for all other
  # locations (*).
    my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets(
      'ChangeBatch' => {
        'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'GeoLocation' => {
                'ContinentCode' => 'NA'
              },
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.44'
                }
              ],
              'SetIdentifier' => 'North America',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'GeoLocation' => {
                'ContinentCode' => 'SA'
              },
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.45'
                }
              ],
              'SetIdentifier' => 'South America',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'GeoLocation' => {
                'ContinentCode' => 'EU'
              },
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.46'
                }
              ],
              'SetIdentifier' => 'Europe',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'GeoLocation' => {
                'CountryCode' => '*'
              },
              'Name'            => 'example.com',
              'ResourceRecords' => [

                {
                  'Value' => '192.0.2.47'
                }
              ],
              'SetIdentifier' => 'Other locations',
              'TTL'           => 60,
              'Type'          => 'A'
            }
          }
        ],
        'Comment' => 'Geolocation configuration for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

# Returns a Paws::Route53::ChangeResourceRecordSetsResponse object. # To create geolocation alias resource record sets # The following example creates four geolocation alias resource record sets that # route traffic to ELB load balancers. Traffic is routed to one of four IP # addresses, for North America (NA), for South America (SA), for Europe (EU), # and for all other locations (*). my $ChangeResourceRecordSetsResponse = $route53->ChangeResourceRecordSets( 'ChangeBatch' => { 'Changes' => [

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-123456789.us-east-2.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z3AADJGX6KTTL2'
              },
              'GeoLocation' => {
                'ContinentCode' => 'NA'
              },
              'Name'          => 'example.com',
              'SetIdentifier' => 'North America',
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-234567890.sa-east-1.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z2P70J7HTTTPLU'
              },
              'GeoLocation' => {
                'ContinentCode' => 'SA'
              },
              'Name'          => 'example.com',
              'SetIdentifier' => 'South America',
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-234567890.eu-central-1.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z215JYRZR1TBD5'
              },
              'GeoLocation' => {
                'ContinentCode' => 'EU'
              },
              'Name'          => 'example.com',
              'SetIdentifier' => 'Europe',
              'Type'          => 'A'
            }
          },

          {
            'Action'            => 'CREATE',
            'ResourceRecordSet' => {
              'AliasTarget' => {
                'DNSName' =>
                  'example-com-234567890.ap-southeast-1.elb.amazonaws.com ',
                'EvaluateTargetHealth' => 1,
                'HostedZoneId'         => 'Z1LMS91P8CMLE5'
              },
              'GeoLocation' => {
                'CountryCode' => '*'
              },
              'Name'          => 'example.com',
              'SetIdentifier' => 'Other locations',
              'Type'          => 'A'
            }
          }
        ],
        'Comment' => 'Geolocation alias configuration for example.com'
      },
      'HostedZoneId' => 'Z3M3LMPEXAMPLE'
    );

    # Results:
    my $ChangeInfo = $ChangeResourceRecordSetsResponse->ChangeInfo;

    # Returns a L<Paws::Route53::ChangeResourceRecordSetsResponse> object.

Values for attributes that are native types (Int, String, Float, etc) can passed as-is (scalar values). Values for complex Types (objects) can be passed as a HashRef. The keys and values of the hashref will be used to instance the underlying object. For the AWS API documentation, see https://docs.aws.amazon.com/goto/WebAPI/route53/ChangeResourceRecordSets

ATTRIBUTES

REQUIRED ChangeBatch => Paws::Route53::ChangeBatch

A complex type that contains an optional comment and the Changes element.

REQUIRED HostedZoneId => Str

The ID of the hosted zone that contains the resource record sets that you want to change.

SEE ALSO

This class forms part of Paws, documenting arguments for method ChangeResourceRecordSets in Paws::Route53

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues