The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.

NAME

Paws::SSM::CreateAssociation - Arguments for method CreateAssociation on Paws::SSM

DESCRIPTION

This class represents the parameters used for calling the method CreateAssociation on the Amazon Simple Systems Manager (SSM) service. Use the attributes of this class as arguments to method CreateAssociation.

You shouldn't make instances of this class. Each attribute should be used as a named argument in the call to CreateAssociation.

SYNOPSIS

    my $ssm = Paws->service('SSM');
    my $CreateAssociationResult = $ssm->CreateAssociation(
      Name                          => 'MyDocumentARN',
      ApplyOnlyAtCronInterval       => 1,                      # OPTIONAL
      AssociationName               => 'MyAssociationName',    # OPTIONAL
      AutomationTargetParameterName =>
        'MyAutomationTargetParameterName',                     # OPTIONAL
      CalendarNames      => [ 'MyCalendarNameOrARN', ... ],    # OPTIONAL
      ComplianceSeverity => 'CRITICAL',                        # OPTIONAL
      DocumentVersion    => 'MyDocumentVersion',               # OPTIONAL
      InstanceId         => 'MyInstanceId',                    # OPTIONAL
      MaxConcurrency     => 'MyMaxConcurrency',                # OPTIONAL
      MaxErrors          => 'MyMaxErrors',                     # OPTIONAL
      OutputLocation     => {
        S3Location => {
          OutputS3BucketName => 'MyS3BucketName',    # min: 3, max: 63; OPTIONAL
          OutputS3KeyPrefix  => 'MyS3KeyPrefix',     # max: 500; OPTIONAL
          OutputS3Region     => 'MyS3Region',        # min: 3, max: 20; OPTIONAL
        },    # OPTIONAL
      },    # OPTIONAL
      Parameters => { 'MyParameterName' => [ 'MyParameterValue', ... ], }
      ,                                                # OPTIONAL
      ScheduleExpression => 'MyScheduleExpression',    # OPTIONAL
      SyncCompliance     => 'AUTO',                    # OPTIONAL
      TargetLocations    => [
        {
          Accounts          => [ 'MyAccount', ... ], # min: 1, max: 50; OPTIONAL
          ExecutionRoleName =>
            'MyExecutionRoleName',                   # min: 1, max: 64; OPTIONAL
          Regions => [ 'MyRegion', ... ],            # min: 1, max: 50; OPTIONAL
          TargetLocationMaxConcurrency => 'MyMaxConcurrency',   # min: 1, max: 7
          TargetLocationMaxErrors      => 'MyMaxErrors',        # min: 1, max: 7
        },
        ...
      ],    # OPTIONAL
      Targets => [
        {
          Key    => 'MyTargetKey',               # min: 1, max: 163; OPTIONAL
          Values => [ 'MyTargetValue', ... ],    # max: 50; OPTIONAL
        },
        ...
      ],    # OPTIONAL
    );

    # Results:
    my $AssociationDescription =
      $CreateAssociationResult->AssociationDescription;

    # Returns a L<Paws::SSM::CreateAssociationResult> object.

Values for attributes that are native types (Int, String, Float, etc) can passed as-is (scalar values). Values for complex Types (objects) can be passed as a HashRef. The keys and values of the hashref will be used to instance the underlying object. For the AWS API documentation, see https://docs.aws.amazon.com/goto/WebAPI/ssm/CreateAssociation

ATTRIBUTES

ApplyOnlyAtCronInterval => Bool

By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter is not supported for rate expressions.

AssociationName => Str

Specify a descriptive name for the association.

AutomationTargetParameterName => Str

Specify the target for the association. This target is required for associations that use an Automation document and target resources by using rate controls.

CalendarNames => ArrayRef[Str|Undef]

The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you want to gate your associations under. The associations only run when that Change Calendar is open. For more information, see AWS Systems Manager Change Calendar (https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar).

ComplianceSeverity => Str

The severity level to assign to the association.

Valid values are: "CRITICAL", "HIGH", "MEDIUM", "LOW", "UNSPECIFIED"

DocumentVersion => Str

The document version you want to associate with the target(s). Can be a specific version or the default version.

InstanceId => Str

The instance ID.

InstanceId has been deprecated. To specify an instance ID for an association, use the Targets parameter. Requests that include the parameter InstanceID with SSM documents that use schema version 2.0 or later will fail. In addition, if you use the parameter InstanceId, you cannot use the parameters AssociationName, DocumentVersion, MaxErrors, MaxConcurrency, OutputLocation, or ScheduleExpression. To use these parameters, you must use the Targets parameter.

MaxConcurrency => Str

The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.

If a new instance starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new instance will process its association within the limit specified for MaxConcurrency.

MaxErrors => Str

The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 instances and set MaxError to 10%, then the system stops sending the request when the sixth error is received.

Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.

REQUIRED Name => Str

The name of the SSM document that contains the configuration information for the instance. You can specify Command or Automation documents.

You can specify AWS-predefined documents, documents you created, or a document that is shared with you from another account.

For SSM documents that are shared with you from other AWS accounts, you must specify the complete SSM document ARN, in the following format:

arn:partition:ssm:region:account-id:document/document-name

For example:

arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document

For AWS-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, AWS-ApplyPatchBaseline or My-Document.

OutputLocation => Paws::SSM::InstanceAssociationOutputLocation

An S3 bucket where you want to store the output details of the request.

Parameters => Paws::SSM::Parameters

The parameters for the runtime configuration of the document.

ScheduleExpression => Str

A cron expression when the association will be applied to the target(s).

SyncCompliance => Str

The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.

In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API action. In this case, compliance data is not managed by State Manager. It is managed by your direct call to the PutComplianceItems API action.

By default, all associations use AUTO mode.

Valid values are: "AUTO", "MANUAL"

TargetLocations => ArrayRef[Paws::SSM::TargetLocation]

A location is a combination of AWS Regions and AWS accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.

Targets => ArrayRef[Paws::SSM::Target]

The targets for the association. You can target instances by using tags, AWS Resource Groups, all instances in an AWS account, or individual instance IDs. For more information about choosing targets for an association, see Using targets and rate controls with State Manager associations (https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-state-manager-targets-and-rate-controls.html) in the AWS Systems Manager User Guide.

SEE ALSO

This class forms part of Paws, documenting arguments for method CreateAssociation in Paws::SSM

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues