The London Perl and Raku Workshop takes place on 26th Oct 2024. If your company depends on Perl, please consider sponsoring and/or attending.
 / 
Test-Smoke-1.79_09
River stage zero No dependents
5 ++

Changes for version 1.79_09 - 2023-04-29

  • (Abe Timmerman, Sat, 29 Apr 2023 15:14:46 +0200) Autocommit for distribution Test::Smoke 1.79_09 (same)

Changes for version 1.79_08 - 2022-10-20

  • (Abe Timmerman, Thu, 20 Oct 2022 14:48:13 +0200) Autocommit for distribution Test::Smoke 1.79_08 (same)
  • (Abe Timmerman, Thu, 27 Apr 2023 10:14:41 +0200) Change the default poster module to HTTP::Tiny
  • The default for config is HTTP::Tiny, but the "sane default" was
  • LWP::UserAgent, this is now also HTTP::Tiny.
  • (Abe Timmerman, Sat, 29 Apr 2023 11:43:52 +0200) tsrepostjsn.pl: add option to re-post a specific file
  • We now have a new option '--jsonreport' that lets one post a specific
  • file to the reports server.
  • Also fixed a bug for the case where no '--configfile' was specified and
  • the 'configfile_error' attribute didn't exist.
  • (Abe Timmerman, Sat, 29 Apr 2023 14:22:38 +0200) BUGFIX: https://github.com/abeltje/Test-Smoke/issues/74
  • Older 'curl' versions (before 7.68.0) needed the '--globoff' switch to
  • make the IPv6 syntax for [::1] work. We now check the version of curl to
  • see if we need to add the switch.
  • See also commit: f4b90b293a2e163f49b55fa2996a6368115e08b9
  • (Abe Timmerman, Sat, 29 Apr 2023 15:10:33 +0200) Add 'curlargs' to exceptions
  • New app-options should be excluded from the pod-coverage test, they are
  • not documented in POD.

Changes for version 1.79_07 - 2022-09-05

  • (Abe Timmerman, Mon, 5 Sep 2022 11:36:00 +0200) Autocommit for distribution Test::Smoke 1.79_07 (test)
  • (abeltje, Thu, 20 Oct 2022 14:01:17 +0200) Remove '--globoff' for curl
  • Some of the cpantesters (and my Ubuntu Jammy) failed the test for IPv6,
  • so I try to see if this has something to do with curl version.
  • (Abe Timmerman, Thu, 20 Oct 2022 14:25:06 +0200) Replace CGI::Util with URI::Escape
  • CGI::Util doesn't support escape/unescape officially, and as we already
  • had a dependency on URI it is better to use the supported
  • uri_escape/uri_unescape from URI::Escape.
  • (abeltje, Tue, 30 Aug 2022 12:53:27 +0200) Introduce the new tsconfigsmoke.pl
  • A reimplementation of configsmoke.pl as a Test::Smoke::App with the
  • existing options extended for configuration. Now App-Options are the
  • same as Config-Options.
  • (abeltje, Tue, 30 Aug 2022 12:55:05 +0200) More work on tsconfigsmoke.pl
  • (Abe Timmerman, Thu, 18 Aug 2022 17:09:39 +0200) Add the Mailer-config
  • Mail config is now also part of ConfigSmoke.
  • Fix a problem with the Scheduler:
  • - the grep rejected all existing cron lines
  • Fix a problem with false but defined default values in prompt().
  • Update the mail options with stuff for ConfigSmoke.

Changes for version 1.79_06 - 2022-08-30

  • (Abe Timmerman, Tue, 30 Aug 2022 13:37:30 +0200) Autocommit for distribution Test::Smoke 1.79_06 (test)
  • (Abe Timmerman, Thu, 1 Sep 2022 08:43:49 +0200) FIX: typo
  • -Duseithreads (e before a)
  • (Bram, Tue, 30 Aug 2022 22:13:13 +0200) Fix `Test::Smoke::Util::set_local_patch`
  • The `set_local_patch` function got 'broken' when the 'patchlevel.h'
  • in the perl5 repo got detabified (committed on 17 Jan 2021).
  • It no longer worked because the code was using: `/\t,NULL/`
  • That worked fine when the tabs were used for indentation but it
  • got silently broken when the tabs were replaces with spaces.
  • (Bram, Tue, 30 Aug 2022 23:02:54 +0200) Update 'patchlevel.h' file used in the test
  • This was using an old patchlevel.h file, update it to a more
  • recent version.
  • Also add xt/perl/git_version.h, this is used by xt/perl/patchlevel.h
  • and is needed for the compiling tests. (Without tests in xt/ fail.)
  • (Bram, Tue, 30 Aug 2022 23:08:10 +0200) Patch the patchlevel.h copy
  • Other test still expect the old format of patchlevel.h which
  • contains a patchnum... Even the number is important for the
  • tests...
  • So re-add the patchnum and remove 'uncommitted-changes' (the tests
  • can't deal with it..)
  • Another option would be to clean up the other tests but that is
  • a bigger task...
  • (Abe Timmerman, Thu, 1 Sep 2022 09:10:29 +0200) carp() when setting local patch fails
  • This code was silently broken for about 20 months because
  • patchlevel.h was detabified.
  • To avoid the same problem in the future: carp() when adding
  • the local patch to patchlevel.h fails we should keep an eye on the
  • logfiles.
  • (Abe Timmerman, Thu, 1 Sep 2022 13:40:47 +0200) Merge branch 'bram-perl-bram/windows-git-test-fixes'
  • (Abe Timmerman, Fri, 2 Sep 2022 11:53:18 +0200) Add USE_MINGW_ANSI_STDIO as default for Configure_win32()
  • https://github.com/Perl/perl5/issues/20214
  • I guess this is a case of "Doctor, it hurts when I do this...". We'll
  • just switch it on (it won't hurt MSVC and benefits gcc) and provide and
  • escape with `-UUSE_MINGW_ANSI_STDIO`. We should aim to build the best
  • possible Perl on Windows that we can imo.
  • (Abe Timmerman, Sun, 4 Sep 2022 20:48:14 +0200) New helper programme: tsrepostjsn.pl
  • Sometimes the reportserver isn't there or won't accept a report, now,
  • one can repost that report with this tool.
  • It can be interactive and will look in the archive directory (adir) for
  • the jsn files one wants to resend.
  • (Abe Timmerman, Mon, 5 Sep 2022 11:05:47 +0200) Also install the new tsrepostjsn.pl script
  • I forgot to put it in the EXE_FILES key for WriteMakefile().

Changes for version 1.79_05 - 2022-08-30

  • (Abe Timmerman, Tue, 30 Aug 2022 11:43:29 +0200) Autocommit for distribution Test::Smoke 1.79_05 (test)
  • (Abe Timmerman, Tue, 30 Aug 2022 13:36:03 +0200) Remove debug code (Test::LongString)

Changes for version 1.79_04 - 2022-08-24

  • (Abe Timmerman, Wed, 24 Aug 2022 14:10:34 +0200) Autocommit for distribution Test::Smoke 1.79_04 (test)
  • (Abe Timmerman, Wed, 24 Aug 2022 14:25:39 +0200) Restore another patch that I removed
  • (Abe Timmerman, Tue, 30 Aug 2022 10:07:18 +0200) Drop support for dmake.exe (MSWin32)
  • dmake.exe is no longer supported where gmake.exe is, so we drop the
  • support for dmake.
  • (Abe Timmerman, Tue, 30 Aug 2022 10:18:05 +0200) FIX: Configure_win32() was broken!
  • With the introduction of gmake on MSWin32 Configure_win32() has been
  • broken quite badly (assignments went from `*=` in dmake to `:=` in
  • gmake; the regexen didn't look at that).
  • I've also introduced more Configure switches to the platform:
  • CHANGE:
  • -Duseithreads is now on by default,
  • -Uuseithreads to switch it explicitly off
  • FIX:
  • -UWIN64 now works as it should
  • ADD:
  • -Duse64bitint (-UWIN64)
  • -Duselongdouble (gcc)
  • -Dusequadmath (gcc)
  • -Dusesitecustomize
  • -Udefault_inc_excludes_dot
  • (Abe Timmerman, Tue, 30 Aug 2022 11:28:49 +0200) Put the compiler messages in the .out-file
  • https://github.com/abeltje/Test-Smoke/issues/54
  • Test::Smoke was relying on the logfile (created from STDOUT and STDERR
  • redirecting) for its compilermessages. I now moved them to the .out-file
  • - which should be more reliable - and adjusted the calls to `grepccmsg`
  • and `grepnonfatal`.

Changes for version 1.79_02 - 2022-08-18

  • (Abe Timmerman, Thu, 18 Aug 2022 20:47:54 +0200) Autocommit for distribution Test::Smoke 1.79_02 (test)
  • (Abe Timmerman, Wed, 24 Aug 2022 10:37:18 +0200) FIX: xtest Makefile target
  • 83dafe7e6effe5489 was too gnu-make specific and broke bsd-make
  • It looks that this is a portable solution, it's just a developer helper
  • (Bram, Thu, 18 Aug 2022 18:20:12 +0200) Remove test repository when rsync isn't found
  • In t/syncer_rsync.t a fixed test directory (t/tsgit) is used.
  • At the end of the test it normally removes this directory but when
  • some of the tests are skipped then it left this directory in place
  • which caused the next test run to have a failure (on `git commit`).
  • Alternative fixes:
  • - use a tmp dir like t/syncer_git.t does
  • - remove the directory at the start of the test if it exist
  • (Bram, Thu, 18 Aug 2022 18:19:54 +0200) Configure git user/emailaddress for the test repo
  • The test create their own git repo and then adds some files in it and
  • then it does a `git commit`.
  • On Windows the `git commit` failed because it was unable to determine a valid
  • username/email-address. This resulted in extra test failures.
  • -> After creating a repo set a username and emailaddress in the config of
  • that repo.
  • (Bram, Thu, 18 Aug 2022 18:18:30 +0200) Abort tests when chdir to repo dir failed
  • The test init their own git repo and then does a `chdir()` to that
  • directory.
  • If that `chdir()` would fail then abort the test since it would/could otherwise
  • be modifying the Test-Smoke repo.
  • (I haven't seen failures with `chdir()`, it's more a safe-guard to prevent
  • against altering the wrong repo)
  • (Using `die` instead of `skip` at the request of @abeltje)
  • (Bram, Thu, 18 Aug 2022 18:18:23 +0200) Check exit status of every git command
  • During testing (on Windows) several git commands failed but this
  • wasn't obvious from the test output.
  • -> Adapt the test to check the exit status of git after every command.
  • (Bram, Thu, 18 Aug 2022 22:25:47 +0200) Lowercase cpu type in smoke report
  • On my Windows laptop System::Info reports the cpu_type as 'AMD64'.
  • Looking at the smoke db: other platforms appear to report it as 'amd64'.
  • Lowercase it so that the Windows reports also show as 'amd64'.
  • (Bram, Thu, 18 Aug 2022 22:39:31 +0200) Add '.mailmap' to ignore list of MANIFEST check
  • The '.mailmap' file is not included in the MANIFEST, it's also
  • special cased in perl5.git/t/porting/manifest.t.
  • The manifest test of Test::Smoke should also ignore it.
  • All reports currently contain:
  • MANIFEST messages:
  • MANIFEST did not declare '.mailmap'
  • which is irrelevant noise.
  • (Bram, Fri, 19 Aug 2022 13:37:52 +0200) Filter out the default msg in `user_skiped_tests`
  • `bin/configsmoke.pl` adds a default message when creating the 'skip tests' file.
  • Filter out that message in the report to reduce some 'useless' info.
  • For reference: the 'skip tests' file is used by `...::Smoker::set_skip_tests`
  • which does some more filtering (skip comments, ...).
  • Exact Filtering that it does:
  • $raw =~ m/^\s*#/ and next;
  • $raw =~ s/(\S+).*/$1/s;
  • if ($raw !~ m/\.t$/ and $raw !~ m/test\.pl$/) {
  • next;
  • }
  • I opted not to do the same filtering and instead just filter the default
  • message. If there are comments in the file then they could be useful
  • to include in the report (i.e. if they explain why a test file is skipped)
  • (Abe Timmerman, Wed, 24 Aug 2022 12:34:58 +0200) Autocommit for distribution Test::Smoke 1.79_03 (test)
  • (Abe Timmerman, Wed, 24 Aug 2022 14:06:54 +0200) FIX: the test cluttered Test-Smoke/.git/config
  • I don't know what happened, but I guess I cherry-picked the commits in
  • the wrong order. Sorry everyone; please check your local git config!

Changes for version 1.79_01 - 2022-08-17

  • (Abe Timmerman, Wed, 17 Aug 2022 08:59:35 +0200) Autocommit for distribution Test::Smoke 1.79_01 (test)
  • (Bram, Mon, 15 Aug 2022 21:07:39 +0200) Include custom hostname in smoke report
  • In commit 5920e4cbcef17d7b00206d52dddd5b8ba33aafea
  • Author: abeltje <abeltje@test-smoke.org>
  • Date: Fri Apr 20 22:38:11 2018 +0200
  • Solve https://github.com/abeltje/Test-Smoke/pull/37
  • I don't like using ENVironment vars for legitimate settings in the
  • software, so I'd rather use the configfile for that.
  • Add a question in configsmoke.pl
  • The option was added to set a custom hostname in the configfile.
  • In that commit the custom hostname is used when sending the report to
  • the smokedb (that is: in `Test::Smoke::Reporter::smokedb_data`).
  • But the hostname is also used in the preamble of the report and that
  • code was left unchanged so the real hostname still leaked in the report.
  • Fix this and (also) use the custom hostname in the `preamble` function.
  • (+ add a test for it, test file is based on t/report-usernote.t)
  • (Note: commit 5920e4c was based on a PR and in the original commit
  • the preamble function was also updated. That part of the
  • change got lost when converting it to a config option.)
  • (Bram, Mon, 15 Aug 2022 21:24:06 +0200) Use `done_testing()` in t/report-usernote.t
  • The test file was added in commit 792da5b7176f3141f5c45e54e16a4fa1d0b34230
  • Author: Abe Timmerman <abeltje@diefenbaker.local>
  • Date: Mon Apr 15 00:27:00 2013 +0200
  • Implement variable position for the user_note:
  • - un_position == 'top' => at the start of the report
  • - un_position == <!top> => at the end of the report
  • My guess: `done_testing()` was commented support older perls (with an
  • oder versions of Test::More which lacked support for it).
  • Today: plenty of other files in the repo are using `done_testing()` so
  • there is no reason why t/report-usernote.t shouldn't be using it.
  • (Bram, Thu, 18 Aug 2022 16:00:55 +0200) Skip tests with git when `git init fails`
  • When `git init` failed then the test would continue which is undesirable.
  • When running `make test` in the Test-Smoke git repo I observed:
  • - `git init` failed (because of the '-b' option, unknown in my git version)
  • - there was a test failure since it checks the exit code
  • - it continues running git commands, including `git commit`
  • Result: changes were committed to the Test-Smoke git repo and *not* to the
  • test repo that is normally used inside the test.
  • Fix this by skipping the git tests when `git init` fails.
  • (Bram, Thu, 18 Aug 2022 16:07:57 +0200) Silence default branch name warning
  • On a more recent version of git there is a warning about the
  • default branch name. The warning can be silenced by
  • - using the '-b' option to set a (different) default branch name
  • - using the '-q' option
  • In commit 0f7ceb8c4aa1f2f64a14b86f2fcbef32c7981787 the '-b' option
  • was added to `git init` but that breaks compatibility with older git
  • versions. These do not know the '-b' option and thus fail.
  • To preserve backwards and future compatibility:
  • - use the '-q' option to silence the warning
  • - use `git -c init.defaultBranch=master init` to ensure the default branch
  • name is master for the test repo.
  • (Older git versions use 'master' by default, newer versions currently
  • use 'master' but that may change in the future. So git-upstream decides
  • to change default name then the '-c' should do the trick to keep it as
  • 'master')
  • (Abe Timmerman, Thu, 18 Aug 2022 17:21:50 +0200) Merge branch 'bram-perl-bram/git-init'
  • https://github.com/abeltje/Test-Smoke/pull/61
  • (Abe Timmerman, Thu, 18 Aug 2022 17:32:32 +0200) Merge branch 'bram/custom-hostname' of https://github.com/bram-perl/Test-Smoke into bram-perl-bram/custom-hostname
  • https://github.com/abeltje/Test-Smoke/pull/58
  • (Abe Timmerman, Thu, 18 Aug 2022 17:36:54 +0200) Merge branch 'bram-perl-bram/custom-hostname' into bugfixes/by-bram
  • https://github.com/abeltje/Test-Smoke/pull/58
  • (Abe Timmerman, Thu, 18 Aug 2022 17:38:30 +0200) Merge branch 'bram/usernote-done-testing' of https://github.com/bram-perl/Test-Smoke into bram-perl-bram/usernote-done-testing
  • (Abe Timmerman, Thu, 18 Aug 2022 17:39:06 +0200) Merge branch 'bram-perl-bram/usernote-done-testing' into bugfixes/by-bram
  • https://github.com/abeltje/Test-Smoke/pull/59
  • (Abe Timmerman, Thu, 18 Aug 2022 18:17:52 +0200) Make sure all filehandles are AUTOFLUSH during smoke
  • Inspired by: https://github.com/abeltje/Test-Smoke/pull/60
  • It appears that Windows likes it better if the filehandles are on
  • autoflush during the actual smoke.
  • (Abe Timmerman, Thu, 18 Aug 2022 18:21:19 +0200) Merge branch 'bugfixes/by-bram'
  • Merge work by Bram:
  • - fix on Tux's fix for the git-defaultBranch (#61)
  • - autoflush for filehandles used during the actual smoke (not #60)
  • - fix forgotten `done_testing()` (#59(
  • - fix leak of actual hostname in the smoke-report (#58)
  • (Bram, Thu, 18 Aug 2022 18:18:23 +0200) Check exit status of every git command
  • During testing (on Windows) several git commands failed but this
  • wasn't obvious from the test output.
  • -> Adapt the test to check the exit status of git after every command.
  • (Bram, Thu, 18 Aug 2022 19:00:23 +0200) Cache `$daemon->sockhost` in t/poster-post.t
  • On my Windows 10 system 't/poster-post.t' was stuck.
  • Debugging showed that this *apparently* happened when it tried to get
  • the value of `$daemon->sockhost` for the test with 'HTTP::Tiny'.
  • Earlier calls for `$daemon->sockhost` (for the curl test) did succeed
  • and did behave as expected...
  • Sample output of a run that was stuck:
  • # HTTP::Daemon (6.12): IPv6 (::1)
  • # Temporary daemon at: http://[::1]:57965/
  • ok 1 - An object of class 'Test::Smoke::Poster::LWP_UserAgent' isa 'Test::Smoke::Poster::LWP_UserAgent'
  • ok 2 - write_json
  • [2022-08-18 16:47:15Z] Posting to http://[::1]:57965/report via LWP::UserAgent.
  • [2022-08-18 16:47:15Z] Reading from (C:\Perl\Test-Smoke\t\testsuite.jsn)
  • [2022-08-18 16:47:15Z] Report data: {"sysinfo":"MSWin32"}
  • [2022-08-18 16:47:15Z] [CoreSmokeDB] {"id":42}
  • ok 3 - Got id (LWP::Useragent: http://[::1]:57965/report)
  • ok 4 - An object of class 'Test::Smoke::Poster::Curl' isa 'Test::Smoke::Poster::Curl'
  • ok 5 - write_json
  • [2022-08-18 16:47:15Z] Posting to "http://[::1]:57965/report" via curl.
  • [2022-08-18 16:47:15Z] Reading from (C:\Perl\Test-Smoke\t\testsuite.jsn)
  • [2022-08-18 16:47:15Z] Report data: {"sysinfo":"MSWin32"}
  • [2022-08-18 16:47:15Z] In pwd(C:/Perl/Test-Smoke) running:
  • [2022-08-18 16:47:15Z] qx[C:\Windows\system32\curl.EXE --globoff -A "Test::Smoke/1.79_01 (Test::Smoke::Poster::Curl)" -d json=%7B%22sysinfo%22%3A%22MSWin32%22%7D "http://[::1]:57965/report"]
  • % Total % Received % Xferd Average Speed Time Time Time Current
  • Dload Upload Total Spent Left Speed
  • 100 49 100 9 100 40 522 2322 --:--:-- --:--:-- --:--:-- 3062
  • [2022-08-18 16:47:15Z] [CoreSmokeDB] {"id":42}
  • ok 6 - Got id (curl: http://[::1]:57965/report)
  • And then it kept on waiting..
  • Caching the value of `$daemon->sockhost` appears to fix it..
  • (I've got no idea why tho)
  • With this patch applied and re-running the test it continues:
  • ok 7 - An object of class 'Test::Smoke::Poster::HTTP_Tiny' isa 'Test::Smoke::Poster::HTTP_Tiny'
  • ok 8 - write_json
  • [2022-08-18 16:56:15Z] Posting to http://[::1]:57990/report via HTTP::Tiny.
  • [2022-08-18 16:56:15Z] Reading from (C:\Perl\Test-Smoke\t\testsuite.jsn)
  • [2022-08-18 16:56:15Z] Report data: {"sysinfo":"MSWin32"}
  • [2022-08-18 16:56:15Z] [CoreSmokeDB] {"id":42}
  • ok 9 - Got id (HTTP::Tiny: http://[::1]:57990/report
  • ok 10 - no warnings
  • 1..10
  • (Abe Timmerman, Thu, 18 Aug 2022 19:20:38 +0200) Merge branch 'bram/windows-poster_post.t' of https://github.com/bram-perl/Test-Smoke into bram-perl-bram/windows-poster_post.t
  • (Abe Timmerman, Thu, 18 Aug 2022 19:21:05 +0200) Merge branch 'bram-perl-bram/windows-poster_post.t' into bugfixes/by-bram
  • https://github.com/abeltje/Test-Smoke/pull/63
  • (Abe Timmerman, Thu, 18 Aug 2022 20:24:53 +0200) Add a target to the makefile to run the xt/ tests
  • No convention but on IRC#smoke:
  • 17:41:14 Bram | Is there a make target to run the tests in xt/?
  • 19:26:26 abeltje | no make target for running tests in xt/; is there a convention for that?
  • 19:29:36 ilmari | dzil has an `xtest` command to run them
  • So I named it 'xtest' and used XTEST_FILES to select files to run:
  • make xtest TEST_VERBOSE=1 XTEST_FILES=xt/0*.t
  • but this also works:
  • make xtest
  • (Bram, Thu, 18 Aug 2022 18:18:30 +0200) Abort tests when chdir to repo dir failed
  • The test init their own git repo and then does a `chdir()` to that
  • directory.
  • If that `chdir()` would fail then abort the test since it would/could otherwise
  • be modifying the Test-Smoke repo.
  • (I haven't seen failures with `chdir()`, it's more a safe-guard to prevent
  • against altering the wrong repo)
  • (Using `die` instead of `skip` at the request of @abeltje)
  • (Bram, Thu, 18 Aug 2022 18:19:54 +0200) Configure git user/emailaddress for the test repo
  • The test create their own git repo and then adds some files in it and
  • then it does a `git commit`.
  • On Windows the `git commit` failed because it was unable to determine a valid
  • username/email-address. This resulted in extra test failures.
  • -> After creating a repo set a username and emailaddress in the config of
  • that repo.
  • (Bram, Thu, 18 Aug 2022 18:20:12 +0200) Remove test repository when rsync isn't found
  • In t/syncer_rsync.t a fixed test directory (t/tsgit) is used.
  • At the end of the test it normally removes this directory but when
  • some of the tests are skipped then it left this directory in place
  • which caused the next test run to have a failure (on `git commit`).
  • Alternative fixes:
  • - use a tmp dir like t/syncer_git.t does
  • - remove the directory at the start of the test if it exist
  • (Abe Timmerman, Thu, 18 Aug 2022 20:41:55 +0200) Merge branch 'feature/xtest-make-target'

Documentation

README
ReleaseNotes
These are the Release Notes for 1.30
chkbcfg.pl
Check the buildconfigfile specified on the commandline
configsmoke.pl
Create a configuration for tssmokeperl.pl
patchtree.pl
Patch the sourcetree
smokestatus.pl
Check the status of a running smoke
Test::Smoke::App::SmokeStatus
Guess the status of the current smoke.
FAQ
Test::Smoke frequently asked questions

Modules

Test::Smoke
The Perl core test smoke suite
Test::Smoke::App::AppOption
Object that represents an Application Option.
Test::Smoke::App::AppOptionCollection
A collection of AppOption objects.
Test::Smoke::App::Archiver
The tsarchive.pl application.
Test::Smoke::App::Base
Baseclass for Test::Smoke::App::* applications.
Test::Smoke::App::ConfigSmoke
App for configuring Test::Smoke.
Test::Smoke::App::ConfigSmoke::Files
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::ConfigSmoke::MSWin32
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::ConfigSmoke::Mail
Mixin for Test::Smoke::App::ConfigSmoke.
Test::Smoke::App::ConfigSmoke::MakeOptions
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::ConfigSmoke::Reporter
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::ConfigSmoke::Scheduler
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::ConfigSmoke::SmokeDB
Mixin for Test::Smoke::App::ConfigSmoke.
Test::Smoke::App::ConfigSmoke::SmokeEnv
Mixin for Test::Smoke::App::ConfigSmoke.
Test::Smoke::App::ConfigSmoke::Smokedir
Mixin for Test::Smoke::App::ConfigSmoke.
Test::Smoke::App::ConfigSmoke::Sync
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::ConfigSmoke::WriteSmokeScript
Mixin for Test::Smoke::App::ConfigSmoke
Test::Smoke::App::Options
A collection of application configs and config options.
Test::Smoke::App::Reporter
The tsreport.pl application.
Test::Smoke::App::RepostFromArchive
The tsrepostjsn.pl application.
Test::Smoke::App::RunApp
Run a Test::Smoke::App applet.
Test::Smoke::App::RunSmoke
The tsrunsmoke.pl application.
Test::Smoke::App::SendReport
Implementation for tssendrpt.pl
Test::Smoke::App::SmokePerl
The tssmokeperl.pl application.
Test::Smoke::App::SyncTree
Synchronise the perl source tree from a source.
Test::Smoke::App::W32Configure
Create < $ddir\win32\smoke.mk >
Test::Smoke::Archiver
Archive the smoke files.
Test::Smoke::BuildCFG
OO interface for handling build configurations
Test::Smoke::FTPClient
Implement a mirror like object
Test::Smoke::LogMixin
"Role" that adds logging methods to "traditional" objects.
Test::Smoke::Mailer
Factory for objects to send the report.
Test::Smoke::Mailer::Base
baseclass for Mailers
Test::Smoke::ObjectBase
Base class for objects (AUTOLOADed accessors)
Test::Smoke::Patcher
OO interface to help patching the source-tree
Test::Smoke::Policy
OO interface to handle the Policy.sh stuff.
Test::Smoke::Poster
Factory for poster objects.
Test::Smoke::Poster::Base
Base class for the posters to CoreSmokeDB.
Test::Smoke::Poster::Curl
Poster subclass using curl.
Test::Smoke::Poster::HTTP_Tiny
Poster subclass using HTTP::Tiny.
Test::Smoke::Poster::LWP_UserAgent
Poster subclass using LWP::UserAgent.
Test::Smoke::Reporter
OO interface for handling the testresults (mktest.out)
Test::Smoke::Smoker
OO interface to do one smoke cycle.
Test::Smoke::SourceTree
Manipulate the perl source-tree
Test::Smoke::Syncer
Factory for syncer objects.
Test::Smoke::Util
Take out some of the functions of the smoke suite.
Test::Smoke::Util::Execute
Run a command and return its output.
Test::Smoke::Util::FindHelpers
Functions to help find Helpers (modules/bins)
Test::Smoke::Util::LoadAJSON
A JSON:PP/JSON::XS Factory Class
Test::Smoke::Util::Serialise
Serialise (stringify) values, a bit like Data::Dumper.
Test::Smoke::Util::Win32ErrorMode
Utility function to switch off the error-popup for the current process.

Provides

Test::Smoke::BuildCFG::Config
in lib/Test/Smoke/BuildCFG.pm
Test::Smoke::Logger
in lib/Test/Smoke/LogMixin.pm
Test::Smoke::Mailer::MIME_Lite
in lib/Test/Smoke/Mailer/MIME_Lite.pm
Test::Smoke::Mailer::Mail_Sendmail
in lib/Test/Smoke/Mailer/Mail_Sendmail.pm
Test::Smoke::Mailer::Mail_X
in lib/Test/Smoke/Mailer/Mail_X.pm
Test::Smoke::Mailer::SendEmail
in lib/Test/Smoke/Mailer/SendEmail.pm
Test::Smoke::Mailer::Sendmail
in lib/Test/Smoke/Mailer/Sendmail.pm
Test::Smoke::Syncer::Base
in lib/Test/Smoke/Syncer/Base.pm
Test::Smoke::Syncer::Copy
in lib/Test/Smoke/Syncer/Copy.pm
Test::Smoke::Syncer::FTP
in lib/Test/Smoke/Syncer/FTP.pm
Test::Smoke::Syncer::Forest
in lib/Test/Smoke/Syncer/Forest.pm
Test::Smoke::Syncer::Git
in lib/Test/Smoke/Syncer/Git.pm
Test::Smoke::Syncer::Hardlink
in lib/Test/Smoke/Syncer/Hardlink.pm
Test::Smoke::Syncer::Rsync
in lib/Test/Smoke/Syncer/Rsync.pm
Test::Smoke::Syncer::Snapshot
in lib/Test/Smoke/Syncer/Snapshot.pm

Other files